Scribd
Upload
171 views4 pages

TONGS: Large-Capacity, Self-Locking Wrenches Used To Grip Drill String Components and Apply Torque. As With

The document provides product information on rig tongs and hydraulic casing power tongs. Rig tongs are large self-locking wrenches used to grip drill pipe and apply torque in pairs. There are various types including manual, power, rotary, and casing tongs. The document then details specifications for a manual C-type tong and hydraulic casing power tongs in 10.3/4 and 13.3/8 inch sizes, including torque ratings, weight, range of operation, and required accessories. Hydraulic and size requirements are also listed.

Uploaded by

Ahmed Amir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
171 views4 pages

TONGS: Large-Capacity, Self-Locking Wrenches Used To Grip Drill String Components and Apply Torque. As With

The document provides product information on rig tongs and hydraulic casing power tongs. Rig tongs are large self-locking wrenches used to grip drill pipe and apply torque in pairs. There are various types including manual, power, rotary, and casing tongs. The document then details specifications for a manual C-type tong and hydraulic casing power tongs in 10.3/4 and 13.3/8 inch sizes, including torque ratings, weight, range of operation, and required accessories. Hydraulic and size requirements are also listed.

Uploaded by

Ahmed Amir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

PRODUCT

FACT SHEET
Category- DRILLING/
WORKOVER HANDLING
TOOLS

TONGS : Large-capacity, self-locking wrenches used to grip drill string components and apply torque. As with
opposing pipe wrenches for a plumber, the tongs must be used in opposing pairs. As a matter of efficiency, one
set of tongs is essentially tied off with a cable or chain to the derrick, and the other is actively pulled with
mechanical catheads. The breakout tongs are the active tongs during breakout (or loosening) operations. The
makeup tongs are active during makeup (or tightening) operations. Rig tongs are large self-locking wrenches that
are used to spin pipe and in some cases apply the final makeup torque. There are a variety of rig tongs available
dependent on what application they’ll be used for. Some examples are: casing tongs, power tongs, rotary tongs
and manual tongs.

Manual rig tong-C type Hydraulic Power Tong for Casing

Item Manual rig tong-C type 10.3/4 INCHES 13.3/8 INCHES


88.90 mm to 177.80 HYDRAULIC CASING HYDRAULIC CASING
mm OD(3.5""-7"") POWER TONG WITH POWER TONG WITH
(55,000 lb.ft) ACCESSORIES ACCESSORIES

Item description Complete with Hanger A. 10.3/4 inches casing A. 13 3/8 inches casing
& Lever Assembly, less power tong as per the power tong as per the
jaws for handling following minimum following minimum
tubulars in the range specifications for each specifications for each
3.1/2"" OD to 7.0"" OD unit. unit.
(88.90 mm to 177.80 B. The power tong B. The power tong
mm), manufactured, should be equipped with should be equipped
tested and certified as flexible steel swivel with flexible steel
per API Spec. 7K . joints at both hydraulic swivel joints at both
inlet & outlet together hydraulic inlet & outlet
with complete pair of together with complete

Page 1
PRODUCT
FACT SHEET
Category- DRILLING/
WORKOVER HANDLING
TOOLS

Quick Coupling at each pair of Quick Coupling


end (Aero quip type at each end (Aero quip
having Dust plug and type having Dust plug
caps). and caps).
C. The power tong C. The power tong
should have two main should have two main
controls i.e one for controls i.e one for
"Clockwise-Neutral- "Clockwise-Neutral-
Anticlockwise" rotation Anticlockwise" rotation
and other for "High & and other for "High &
low speed” low speed”
Range: To operate 4 inches To operate 4 inches
(101.60 mm) to 10.3/4 (101.60 mm) to 13.3/8
inches (273.05 mm) API inches (339.725 mm)
Casings / tubular. API Casings / tubular.
Torque Rating: Minimum 55,000 ft-lbs At high gear not less At high gear not less
(7604Kg-m) for sizes than 4,000 ft-lbs and at than 4,000 ft-lbs and at
3.1/2"" to 4.1/4"" and low gear not less than low gear not less than
6912 Kg-m(50,000 ft- 18,000 ft-lbs 25,000 ft-lbs
lbs) for sizes 4.5"" to
7.0""

RPM range: Not less than 20 Not less than 20


(Minimum) and around (Minimum) and around
125 (Maximum) 110 (Maximum)
Weight: 1150 lbs (522 kgs) 1250 lbs (567 kgs)
approx. approx.
ACCESSORIES ACCESSORIES FOR ACCESSORIES FOR EACH ACCESSORIES FOR
FOR EACH PAIR EACH PAIR (TWO NOS) PAIR (TWO NOS) OF EACH PAIR (TWO NOS)
(TWO NOS) OF OF ITEM WITH ITEM WITH MINIMUM OF ITEM WITH
ITEM WITH MINIMUM TORQUE TORQUE RATING MINIMUM TORQUE
MINIMUM RATING RATING
TORQUE
RATING
Lug jaw A.3.1/2""- 4.1/4"" I. 4.1/2 inches (114.30 I. 5.1/2 inches (139.70
assembly (88.90 mm-107.95 mm) mm) OD Casing Jaw-assy. mm) OD Casing Jaw-
Page 2
PRODUCT
FACT SHEET
Category- DRILLING/
WORKOVER HANDLING
TOOLS

- (55000 ft-lbs) : 02 fitted with dies : 2 sets assy. fitted with dies :
Nos. II. 5.1/2 inches (139.70 2 sets
B. 4.5""-7.0"" (114.3 mm) OD Casing Jaw-assy. II. 7 inches (177.80
mm-177.80 mm) – fitted with dies : 4 sets mm) OD Casing Jaw-
(50000 ft-lbs) :: 02 Nos. III. 7 inches (177.80 mm) assy. fitted with dies :
OD Casing Jaw-assy. 1 set
fitted with dies : 2 sets III. 9.5/8 inches (244.47
IV. 9.5/8 inches (244.47 mm) OD Casing Jaw-
mm) OD Casing Jaw-assy. assy. fitted with dies :
fitted with dies : 4 sets 3 sets
V. 10.3/4 inches (273.05 IV. 13.3/8 inches
mm) OD Casing Jaw-assy. (339.725 mm) OD
fitted with dies: 1 set Casing Jaw-assy. fitted
with dies : 3 sets

The power tong should The power tong should


be fitted with one (01) be fitted with one (01)
set of Hanger assembly set of Hanger assembly
& Turn-buckles to & Turn-buckles to
compensate up / down compensate up / down
movement during movement during
makeup or breakout makeup or breakout
operation and for operation and for
levelling. levelling.
The power tong should The power tong should
be supplied with lift be supplied with lift
cylinder assembly. cylinder assembly.

The power tong should The power tong should


be supplied with two be supplied with two
(02) sets of Torque- (02) sets of Torque-
gauge (ft-lbs scale) & gauge (ft-lbs scale) &
Load cell (one set fitted Load cell (one set fitted
& one set extra) for & one set extra) for
monitoring / measuring monitoring / measuring
produced torque. produced torque.
Page 3
PRODUCT
FACT SHEET
Category- DRILLING/
WORKOVER HANDLING
TOOLS

Hydraulic Not More than 65 GPM 65 GPM at 1000 PSI,


Requirements: at 1000 PSI, Not More Not More than 30 GPM
than 30 GPM at 3000 PSI at 3000 PSI

SIZE (Length x Not more than 60 inches Not more than 60


Width): x 35 inches (1524mm x inches x 35 inches
889mm) (1524mm x 889mm)

Any Query Please Contact: [email protected]

Page 4

You might also like