Marine Engineering Technology Department Marine Engineering I Dr. Ibrahim S. Seddiek

MM 211 T
Marine Engineering Technology Department
Marine Engineering I
Dr. Ibrahim S. Seddiek
4/3/2021 1
Dr.Ibrahim S. Seddiek
MM 211 T
Course Content
Week #1 : Introduction to marine engineering
Week #2 : Pumps & Pumping Fundamentals
Week #3 : Pump characteristics- Pump calculations
Week #4 : Operating piping systems (Bilge &Ballast)
Week #5 : Heat Exchangers
Week #6 : FO & LO Treatment onboard ships
Week #7 : 7th week exam
Week #8 : Purification process onboard ships
Week #9 : Ship’s Power Transmission System
Week #10: Marine Air Compressors
Week #11 : Marine Boilers
Week #12 : 12th week exam
Week #13 : Fundamentals of Steering gear systems onboard ships
Week #14 : Fundamentals of Refrigeration system onboard ships
Week#15 : Fundamentals of marine pollution preventive equipment onboard
Week #16 : Final Exam
4/3/2021 Dr.Ibrahim S. Seddiek 2

MM 211 T
Week #9
Ship’s Power Transmission System
MM 211 T
Ship Transmission System

MM 211 T
• Functions of the main parts of Propulsion system:

(1) Thrust shaft :
The function of the thrust shaft is transferring the revolution
motion to the intermediate shaft and transfers the thrust
from it to the thrust block.
(2) Thrust bearing:
The function of the thrust bearing is
transferring propeller thrust to the
thrust block casing which is fitted
to ship’s hull and causes the ship
to move to the thrust direction (forward. or aft).
MM 211 T
• Thrust block ( bearing) working theory :

1. Thrust collar is forged integrally with the thrust shaft.
2. Thrust pads are fitted in forward and aft side of the thrust
collar and they are able to tilt.
3. When the shaft rotates, an oil pressure is built up between the
white metal face of the thrust pad and the thrust collar.
4. The thrust will transfer from the collar to the thrust pads
through the oil film to the casing which is rigid to ship’s hull
causing movement of the ship
MM 211 T
(3) Stern tube:

The function of stern tube is to
1. support the weight of the propeller and screw shaft
2. prevents sea water to pass through to the ship.
There are two types of stern tube:

A- Water lubricating type
B- Oil lubricating type
MM 211 T
• A- water lubricating type:

used in this type lignum-vita wood or impregnated resin
compound .Lubrication of stern tube takes place when the
bearings absorb water and result a wet slippery surface has
low friction ratio with high resistance to wear.
MM 211 T
B- oil lubricating type:

used in this type lubricating oil which lubricate stern tube
bearings, mostly three stage of seals are used to prevent
water to enter the ship and prevent oil to escape out of the
ship.
MM 211 T
(4) Intermediate shaft :

• The function of the intermediate shaft is transmit the rotation
from the thrust shaft to the screw shaft (propeller shaft)and
transmit the thrust from screw shaft to the thrust shaft.
(5) propeller shaft :
• The function of the propeller shaft is transmit the rotation from
intermediate shaft to the propeller and transmit the thrust
from the propeller to the intermediate shaft.
MM 211 T
(6) The Propeller :

• The function of the propeller is to produce the thrust which
transmitted to the propeller shaft .
• It convert the rotation motion into thurst force
• That thrust generated due to turning of propeller blades
(which have designed angle shape) in the water
• Some ships have fixed angle propeller , in this type controlling
of the ship’s speed is only by controlling main engine speed,
Reversing direction ( ahead or astern) is by reversing of engine
motion clockwise or anticlockwise
• Other ships have controlled pitch propeller which can move
propeller blades around their axis, By that way we can reverse
ship direction ahead or astern by reversing propeller blades’
angle , also speed can be effected by changing that angle.
MM 211 T
MM 211 T
7) Shaft bearings:
• The function of shaft bearings to carry shaft weight and to
keep it aligned , these bearings are lubricated by oil which is
cooled mostly by sea water coils passing in their sumps. Wear
of these bearings above limit could cause harmful vibration
and shaft misalignment.

Marine Engineering Technology Department Marine Engineering I Dr. Ibrahim S. Seddiek

Uploaded by

Copyright:

Available Formats

Marine Engineering Technology Department Marine Engineering I Dr. Ibrahim S. Seddiek

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Marine Engineering Technology Department Marine Engineering I Dr. Ibrahim S. Seddiek

Uploaded by

Copyright:

Available Formats

MM 211 T

Marine Engineering Technology Department

Dr. Ibrahim S. Seddiek

4/3/2021 Dr.Ibrahim S. Seddiek 2

Ship Transmission System

• Functions of the main parts of Propulsion system:

• Thrust block ( bearing) working theory :

(3) Stern tube:

There are two types of stern tube:

• A- water lubricating type:

B- oil lubricating type:

(4) Intermediate shaft :

(6) The Propeller :

You might also like