DEPARTMENT OF ECE, EWIT iD Mini-Project [18ECMP68] a TeeHINOLOGY 21-04-2021 6" Semester students of ECE department should submit the following information to the Mini-Project coordinators in respect of their mini-project work on or before April 27, 2021. Students are hereby advised to note that this is one of the steps in evaluation process for which 10 marks are awarded from the total internal assessment marks of 100. @ , . 1. Project group with Name, USN of each member: 2. Brief description (Synopsis) of the project along with the title of the project. Synopsis shall not exceed 2 pages. Note: A Project group should consist of minimum of 2 members and maximum of 4 members irrespective of the section. se-gt ol 2) Prof. Kotresh HM Dr. §.G. Hiremath @ Prof. DivyaB N Prof. & Head (ECE) Prof. Manasa $ wettest? Prof. Swetha K ‘East West Institute of Technelogy Be ‘ Project Coordinators. Sea eeneel Scanned with CamScannerProject Synopsis Format for 6" Semester ECE Students Synopsis, preferably, should be of about 2-4 pages. The content should be as brief as is sufficient enough to explain the objective and implementation of the project that the candidate is going to take up. The write up must adhere to the guidelines and should include the following (not necessarily in order as given below). 1. Title Page 2. Name/Title of the Project 3. Objective and scope of the project 4. Methodology (including a summary of the project) 5. Hardware & Software to be used Title Page: This page should consist of the following (format is given in the last page):- 1. Names of the team members 2. USN 3. Contact No. and EMAIL id 4, Proposed Title 5. List of Three Guides of your interest from the department Topic of the Project: This should be explicitly mentioned at the beginning of the Synopsis. Since the topic itself gives a peep into the project to be taken up, candidate is advised to be prudent on naming the project. This being the overall impression on the future work, the topic should corroborate the work. Objective and Scope: This should give a clear picture of the project. Objective should be clearly specified. What the project ends up to and in-what way this is going to help the end user has to be mentioned. fi & wo" Je iB Conclusion: The write-up must end with the concluding Sef eny describing innovations in the approach for implementing the Project, main achievements and also any other important feature that makes the system stands out from the rest. Seb), wu Scanned with CamScannerBibliography/References (Here specify the description of the study material referred for the development of the project.) SPECIFICATIONS FOR SYNOPSIS 1. The synopsis shall'be computer typed (English- British, Font -Times Roman, Size-12 point) and printed on A4 size paper. 2. The Synopsis shall be typed on one side only with 1.5 space with a margin 3.5 em on the left, 2.5 em on the top, and 1.25 cm on the right and at bottom. 3. In the synopsis, the title page [Refer sample sheet (inner cover)] should be given first. This should be followed by index, notations/nomenclature. 4, The diagrams should be printed on a light/white background, Tabular matter should be clearly arranged. 5. The caption for Figure must be given at the BOTTOM of the Fig. 6. The caption for the Table must be given at the TOP of the Table. 7. The Bibliography/References should be written in IEEE format. CIE Procedure: The CIE marks shall be awarded by a committee consisting of the Head of the concerned Department and two senior faculty members of the Department, one of whom shall be the Guide. The CIE-marks awarded for the Mini-project work, shall be based on the evaluation of project report, project :25.The presentation skill and question and answer session in the ratio 50: marks awarded for the project report shall be the same for all the batch mates. CIE Procedure: Contribution to the Mini-project and the performance of each group member shall be assessed nd he (SEE) conducted at the department, in the semester end sexamination She ateustt Scanned with CamScanner