P P H H D D: Rocessor en Anced Etection

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

51110 Notifier 4/8/06 13:54 Page 2

PhD
processor
enhanced
detection series
51110 Notifier 4/8/06 13:54 Page 3

features conventional
• Internal Software Algorithms

• Low profile design


detectors
The P rocessor enh anced D etection series conventional detectors have been produced
• Low current draw using the latest in manufacturing and design techniques, pushing out the boundaries
of existing conventional detector technology. With an on board microprocessor, it’s
• Wide operating voltage 8 to 30V multitude of enhanced features including drift compensation, provides the best in
conventional detection.
• Bi-colour LED detector status
indicator ‘Drift compensation’ algorithms are one of the key in built features of the optical and
optical thermal detectors. These internal algorithms ensure a consistent alarm sensitivity
• Automatic drift compensation threshold for periods between service intervals. This provides the user with maintenance
savings by extending the period before cleaning of the detector chamber is required
• Programmable sensitivity whilst minimising the risk of nuisance alarms.

• Addressable feature

• Advanced maintenance features


via remote hand-held test unit

• Range of detector bases available

• Approved to EN54

• 3 Year Warranty

The sensitivity of a smoke detector is critical to it’s overall performance. This is reflected
in both its ability to detect real fire conditions and its resilience to non-fire stimuli. The
smoke detector’s performance can be optimised for it’s application by selecting from
one of three preset alarm thresholds – Low, Medium and High, offering greater stability
and optimum performance within the environment in which it has been installed. The
selection is easily achieved through the use of a remote hand-held programming tool.

The remote hand-held programming tool can also be used in conjunction with the PhD
series of detectors to gain access to other enhanced features. The features available
include: read/write last maintenance date, read chamber contamination level, read
value of thermal element and perform an alarm test.

Each detector can be given a unique address. When used in conjunction with the
S300ZDU Zone Display Unit the address will be displayed whenever the detector
is in alarm.

All the features via the hand-held programming unit are achieved effectively and
effortlessly without the need to remove the detector or having to gain direct physical
access (other than by the use of servicing poles), saving valuable commissioning/
maintenance time.
51110 Notifier 4/8/06 13:54 Page 4

They provide the end user with the confidence to know that the SD-851E Optical Smoke Detector utilises the same advanced
system is being regularly serviced and that it is operating at it’s chamber design used in the Multi Criteria detector providing
optimum level, with minimum disruption to business activities. a high tolerance to the effects of long term dust accumulation.
This superior chamber combined with internal drift compensation
In addition to the comprehensive programming tool, a simple laser algorithms, allow the unit to maintain the level of sensitivity set by
based alarm test unit is also available. The coded signal transmitted the user with out degradation over a long period of time allowing
by this device can instruct the detector to generate a full alarm an increased interval between major services.
condition at a range of up to 3 metres from the detector, and is an
ideal tool for initial commissioning and routine system testing. FD-851HTE Fixed Temperature Heat Detector uses the latest in
thermal element technology providing efficient and accurate
detection of fires, especially in environments such as boiler houses
or kitchens where smoke detectors are inappropriate due to the
high level of airborne contamination, or Rate of Rise detectors are
unsuitable due to rapid rises in temperatures.

FD-851RE Rate of Rise Heat Detector like the Fixed Temperature


detector the FD-851RE uses the latest in thermal element
technology providing efficient and accurate detection of fires.
This type of device is used in areas were smoke detectors are
inappropriate but were rapid heat change is not expected.

S300RPTU Remote Programming & Test Unit is a hand held


programmer that communicates with detectors either via the
devices LED or via the S300SAT Satellite unit were the distance
to the device does not allow the user to be in close proximity to
the detector i.e. high ceilings. This unit provides access to the
advanced program set in the detector such as: read / write device
address, alarm sensitivity, LED operation and service date. In
addition this unit allows the user to read the type of device,
contamination level, current percentage of alarm and
The PhD series detectors incorporate a bi-colour LED indicator. The manufacturing date.
integral LED changes colour according to the detector’s status:
Green = Normal, Red = Alarm. This benefits the user by providing
S300SAT Satellite Programming Unit is used in conjunction with
clear, instant visual indication of the detector’s condition. The
the hand held programming unit when the S300RPTU cannot be
Green LED can be programmed for blink/no blink operation.
placed in close proximity to the detector. This unit is designed to
A variety of detector bases are available providing compatibility fit industry standard access poles.
with a wide range of Fire Alarm Control Panels making it ideal
for expansions and retrofit applications. All bases are fitted with S300RTU Remote Test Unit allows a fully functional test to be
a shorting spring to permit circuit testing prior to fitting the carried out on detectors from a distance of up to 3 Meters.
detector and have a tamper resistant feature, which when Consisting of a small key fob style housing, the test unit sends a
activated prevents removal of the detector without the use coded signal to the detectors, which upon receipt, triggers a full
of a tool. internal test to be carried out.

SD-851TE Multi Criteria Smoke and Heat detector combines S300ZDU Zone Display Unit can be used to display the address of
superior Optical smoke chamber design and Thermistor heat a PhD series device when in alarm. This unit is placed at the zone
elements with a sophisticated detector algorithm to provide the entrance to provide additional assistance in locating an alarm
next generation of Multi Criteria detectors. Using the advanced condition.
internal algorithms, the SD-851TE continuously samples the
environment and adjusts its alarm thresholds automatically to
provide optimum sensitivity for the conditions that exist at that
time. Using both smoke and heat elements enable the sensor to
respond quickly to a broad range of fire types whilst remaining A degree above the rest
unaffected by passing phenomenon.
51110 Notifier 4/8/06 13:54 Page 1

NOTIFIER
international
offices
UK AUSTRALIA BENELUX BRAZIL CANADA CHILE CHINA GERMANY HONG KONG INDIA

ITALY JORDAN LEBANON MEXICO POLAND SINGAPORE SOUTH AFRICA SPAIN SWEDEN USA VENEZUELA

NOTIFIER has been involved in the manufacturing and distribution


of fire alarm detection equipment for over 50 years. As a wholly
owned subsidiary of Honeywell, a fortune 50 company, we are
the world’s leading manufacturer of analogue control equipment,
with over 400 fully trained and accredited Engineered Systems
Distributors (ESD) world wide.

NOTIFIER has pioneered the policy of developing sophisticated


advance technology fire detection systems, starting with simple
conventional products through to the large networked multi-
panel intelligent systems.

NOTIFIER is committed to the highest standards of service and


product quality in line with the needs of a life protection
business, and of course, our operations are accredited to ISO
9001, and our products carry world-wide approvals such as LPCB,
Vds, UL, ULC, and BOSEC/ANPI etc.

As an installer you will have the confidence of knowing that


NOTIFIER can always provide the full package of compatible
products, whatever your requirements, wherever in the world.
The end user of course, has the added assurance that the unique
combination of NOTIFIER and it’s ESD network, bring together the
capability of a world leading manufacturer with the fast, friendly
and cost effective service of a local distributor.

Charles Avenue T: +44 (0) 1444 230 300


Burgess Hill F: +44 (0) 1444 230 888
W. Sussex E: sales@notifierfiresystems.co.uk
RH15 9UF www.notifierfiresystems.co.uk

local distributor
Every care has been taken in the preparation of this data sheet but no liability can be accepted for the use of the information therein. Design features may be changed or amended without prior notice.
Ref: 571 (0206)

You might also like