UNJHA NAGAR SEVA SADAN, UNJHA

NAME OF WORK : DESIGN & CONSTRUCTION OF TOWN HALL

(AUDITORIUM) IN FINAL PLOT NO. 260, TP-1, UNJHA FOR UNJHA
NAGARPALIKA, AT - UNJHA, DIST - MEHSANA
SCHEDULE - B1
Rate. (Inc.
Sr.
Description of item Qty 1 % Labor Per Amount
No.
Cess)
EARTHWORK
1 Excavation for foundation up to 1.50M depth 2912.54 67.83 M3 197557.59
incl. sorting out & stacking of useful material
incl. dressing of sides & ramming of bottom
incl. sorting, soring, pumping out water if
required incl. trench filling in layers & watering
ramming etc. with all required lift and lead
etc. complete A) Loose or soft soil
2 Excavation for foundation 1.50 to 3.00 M 2276.84 75.22 M3 171263.90
depth incl. sorting out & stacking of useful
material incl. dressing of sides & ramming of
bottom incl. sorting, soring, pumping out
water if required incl. trench filling in layers &
watering ramming etc. with all required lift and
lead etc. complete A) Loose or soft soil
3 Filling available excavated earth & selected 4691.48 77.23 M3 362323.00
material received from demolition work
(excluding rock) in plinth in layers not
exceeding 20cm in depth consolidating each
deposited layer by ramming & watering etc.
complete
4 Filling in plinth with sand under floors 300.00 402.18 M3 120654.00
including watering ramming, consolidating
and dressing complete (upto 10 ton)
CONCRETE WORK
5 Providing and laying cement concrete 1:4:8 (1- 356.85 2370.46 M3 845898.65
Cement : 4- coarse sand : 8-Crushed stone
aggregates 40 mm nominal size) and curing
complete excluding cost of formwork in (A)
Foundation and Plinth (upto 10 ton) A) FOR
PLAIN CONCRETE
6 Providing and laying controlled cement 267.90 3678.95 M3 985590.71
concrete M-250 for RCC works including the
cost machine mixing, vibrating, scaffolding,
incl. cost of form work / shuttering but
excluding cost of reinforcement etc. complete
up to plinth level for RCC FOOTING

7 Providing and laying controlled cement 230.00 5519.60 M3 1269508.00

concrete M-250 for RCC works including the
cost machine mixing, vibrating, scaffolding,
incl. cost of form work / shuttering but
excluding cost of reinforcement etc. complete
up to floor 2 level for RCC COLUMN

8 Providing and laying controlled cement 560.65 4328.74 M3 2426908.08

concrete M-250 for RCC works including the
cost machine mixing, vibrating, scaffolding,
incl. cost of form work / shuttering but
excluding cost of reinforcement etc. complete
up to plinth level for BEAMS
9 Providing and laying controlled cement 225.00 3728.94 M3 839011.50
concrete M.250 and curing complete
including the cost of formwork but excluding
the cost of reinforcement for reinforced
concrete work in RCC GRADE SLAB

Page 287
10 Providing and laying controlled cement 353.16 4637.14 M3 1637652.36
concrete M.250 and curing complete
including the cost of formwork but excluding
the cost of reinforcement for reinforced
concrete work in RCC SLAB
11 Providing and laying controlled cement 13.64 4903.28 M3 66880.74
concrete M.250 and curing complete
including the cost of formwork but excluding
the cost of reinforcement for reinforced
concrete work in RCC STAIRCASE
12 Providing and laying controlled cement 24.64 5015.81 M3 123589.56
concrete M.250 and curing complete
including the cost of formwork but excluding
the cost of reinforcement for reinforced
concrete work in RCC COPING
13 Providing and laying controlled cement 32.80 5015.81 M3 164518.57
concrete M.250 and curing complete
including the cost of formwork but excluding
the cost of reinforcement for reinforced
concrete work in RCC LINTEL
14 Providing and laying controlled cement 13.46 6063.67 M3 81617.00
concrete M.250 and curing complete
including the cost of formwork but excluding
the cost of reinforcement for reinforced
concrete work in RCC CHAJJA
15 Providing and laying controlled cement 9.36 5069.83 M3 47453.61
concrete M.250 and curing complete
including the cost of formwork but excluding
the cost of reinforcement for reinforced
concrete work in (B) Walls, from top of
foundation level upto floor two level (upto 10
ton)
16 Providing TMT Bar FE 500/500D 227573.20 45.48 Kg. 10350029.14
reinforcement for R.C.C. work including
bending, binding and placing in position
complete upto floor two level (upto 10 ton)
MASONARY WORK
17 Brick work using common burnt clay building 108.79 2858.23 M3 310946.84
bricks having crushing strength not less than
35 kg./Sq.Cm. in foundation and plinth in
Cement Mortar 1:6 (1- Cement : 6 -fine
sand)(B) Conventional (upto 10 ton)
18 Brick work using common burnt clay building 355.75 3020.80 M3 1074649.60
bricks having crushing strength not less than
35 kg./Sq.Cm. in foundation and plinth in
Cement Mortar 1:6 (1- Cement : 6 -fine
sand)(B) Conventional (upto 10 ton) brick
work in superstructure above plinth level upto
all floor levels
19 Half brick masonry in common brunt clay 731.71 477.99 M2 349750.06
building bricks having crushing strength not
less than 35 Kg/Sq.Cm. in Cement mortar 1:3
( 1-Cement : 3-coarse sand ) with 2 Nos of
6mm Mild steel round bars after every three
course embedded in Cement Mortar in
foundation and plinth (B) Conventional (upto
10 ton). in superstructure above plinth level
upto all floor levels
PLASTER WORK
20 Providing 10mm thick cement plaster in single 3174.14 97.70 M2 310113.48
coat on brick/concrete walls for interior
plastering upto floor two level and finished
even and smooth in (i)Cement mortar 1:3 (1-
cement:3-sand). plastering on ceilings and
sofits of stairs
21 Providing 15mm thick cement plaster in single 422.65 109.13 M2 46123.79
coat on Rough (Similar)side of single or half
brick walls for interior plastering upto floor
two level and finished even and smooth in (i)
Cement mortar 1:3 (1-cement:3-sand)

Page 288
22 Providing 10mm thick cement plaster in single 629.10 73.91 M2 46496.78
coat on brick/concrete walls for interior
plastering upto floor two level and finished
even and smooth in (ii) Cement mortar 1:4 (1-
cement :4-sand) For Dado and other wall

23 Providing 20 mm thick double coat mala 4972.95 171.92 M2 854949.56

cement plaster on interior brick / concrete
work for plastering comprising of base coat of
12 mm thick cement plaster in cement mortar
(1 Cement : 4 coarse sand) in rough finishing
and 8 mm thick top coat of cement mortar 1:2
(1 Cement : 2 Coarse sand) finished with
trovel including scaffolding curing etc.
complete.
24 Providing and applying on exterior surfaces of 1684.59 479.75 M2 808182.05
Heritage surface texture granules finish of
Bakelite Hylam Limited (No.22-0001 to 22-
2026) trowelled over 20 mm thick sand faced
cement plastered (Two coat of 12 mm in CM
1:3 & 8 mm coat in CM 1:1) sub strata to get
an average finish coat thickness of 0.08 to 1.2
mm comprising of three components viz. Dry
granules, Granules, bonding agent and top
coat of glossy finish (Dry granules shall be
made from Silica sand, pigments, primarily
inorganic) pure acrylic copolymer emulsion,
etc, of Bakelite Hylam product and top coat
made from solvent acrylic co-polymer
emulsion, broad specturm fungicide of
Bakelite Hylam product including scaffolding,
surface preparation with all contractor's
material, labour, tools, plant, lead lift and
transportation etc complete as per
specifications and as directed by the Engineer-
in-charge at site.

OPENING
25 Frameless toughened glass door with 12mm 15.84 7594.19 M2 120291.97
thick toughened glass fixed to either the
laminated plywood/ gypsum or glass partition
or a civil wall. Rate to include floor spring
(dorma or equivalent) SS handles 2' long
(Kich or equivalent) all complete.
26 Providing & fixing 35mm Thick shutters for 80.88 3697.52 M2 299055.42
doors, windows and clearstory windows
including indian teak wood frames 12cm X
7cm. Size including black enameled iron
oxidies fixtures & fastenings including primer
coat of approved quality and finished with
laminate as per drg. ( Providing and fixing
Decorative plywood 4mm thick / Laminates /
veneer ) Rate to include all hardware etc. all
complete with Door closer (dorma or equiv)
with a 200 mm x300 mm vision panel. The
whole shutter to be weather resistance water
resistance and termite proof including cost of
hinges, necessart screws and alluminium
fixtures and fastening. (A) Indian teak wood.
(i) Fully Panelled. (upto 10 ton)

Page 289
27 Providing and fixing 35 mm thick door shutter 21.60 2100.27 M2 45365.83
in standard design and size with 3.12 mm
thick high densified molded wood fiber primer
coated skin both side of doors. Skin is to be
confirming to ASTM D-1037 pressed under
hot press over plantation wood frame 65 X 27
vertical style, top rail and bottom rail as well
as lock rail of 125 X 27 mm Remaining hollow
portion is to be filled up with injected fire
extingushing grade polyurethane foam (PUF).
The whole shutter to be weather resistance
water resistance and termite proof including
cost of hinges, necessart screws and
alluminium fixtures and fastening.

28 Providing and fixing extruded aluminum 85.50 2545.55 M2 217644.53

window having extruded aluminum Colour
Powder Coated section frame main outer size
127mm x 38.10mm x 1.35mm (of Jindal
Section no:2443,@ Wt.1.384
Kg/mt),horizontal Four track member size
122.20mm x 31.75mm x 1.10mm (of Jindal
Section no:8787,@ Wt. 1.205 Kg/mt),vertical
member of size 122.20mm x 31.75mm x
1.50mm (of Jindal Section no:8935,@ Wt.
1.398 Kg/mt) with sliding shutters of
horizontal member size 40mm x 18mm x
1.29mm (of Jindal Section no:8949 @ wt.of
0.456Kg/mt),vertical member of size 40mm x
18mm x 1.29mm (of Jindal Section no:8947
@ wt.of 0.456Kg/mt/Section 8948,@ Wt.
0.457 Kg/mt) with 5 mm thick transparent
bronze colour tinted float glass with powder
coated aluminum fittings and fixtures and
transparent silicon sealant glass fixing to
frame as per details etc complete for window.

29 Providing and fixing glazed louvered 11.88 3480.12 M2 41343.83

glass windows and ventilators with teak wood
frame 10cm. x 7cm. size including 3 coats of
oil painting to wood work etc.complete. with
wooden louvers plank 12mm thick (upto 10
ton)
30 Providing and fixing rolling shutters of 74.88 3742.46 M2 280235.40
approved make made of 80 mm wide M.S.
laths inter-locked together through their entire
length and jointed together at the ends by end
locks mounted on specially designed pipe
shaft with bracket plates, guide channels and
arragements for inside and outside locking
with push-pull operation including the cost of
hood cover and spring etc. complete.(A)
Shutters having width below 3.5 M.
31 Prov. & fixing M.S. plain grills of required 1710.00 66.00 Kg. 112860.00
pattern to window's gapes etc. with M.S. flats
& 12 mm square bright bar at required
spacing & frame around, square with round
headed bolts, nuts, or by screws built up
section frame work incl. all necessary
materials and labour incl. one coat of priming
coat of red lead paint and two coat of enamel
paint etc. complete at all floor levels

FLOORING & WALL TILE

32 Providing and laying Marbo Grenite tiles 8 to 1357.43 763.84 M2 1036859.33
10 mm thick , 24'' x 24'' in flooring treads of
steps and landing laid on a bed of 12mm thick
cement mortar 1:3 (1-cement : 3-coarse sand
) finishing with flush pointing in white cement.
(upto 10 ton)

Page 290
33 Providing and layingMarbo Grenite tiles 8 to 104.67 783.22 M2 81979.64
10 mm thick , 24'' x 24'' in skrting risers of
steps and dedo on 10mm thick cement
plaster 1:3 (1-cement : 3-coarse sand) and
jointed with white cement slurry (upto 10 ton)

34 Providing and laying Ceramic tiles 6mm thick 153.92 639.21 M2 98387.20
in flooring treads of steps and landing laid on
a bed of 12mm thick cement mortar 1:3 (1-
cement : 3-coarse sand ) finishing with flush
pointing in white cement. (upto 10 ton)

35 Providing and layingCeramic tiles 6mm thick 606.81 658.58 M2 399632.93

in skrting risers of steps and dedo on 10mm
thick cement plaster 1:3 (1-cement : 3-coarse
sand) and jointed with white cement slurry
(upto 10 ton)
36 Providing and laying water proofing treatment 700.00 499.95 M2 349965.00
on terrace including applying neat cement
slurry 2.75 Kg./ Sqmt. On cement admixed
with water proofing component after cleaning
the surface, laying cement concrete with brick
bat 75 mm to 100 mm thick with 50% of C.M.
1:5 admixed with water proofing component
over 20 mm thick layer of C.M. 1:5 to required
slope including ramming at junction of wall
and slab, after two days of proper curing
applying a second coat of cement slurry,
finished the surface with 20 mm thick C.M.
1:4 china mosaic flooring and finally finished
surface with white cement slurry, after
finishing with terrace shall be finished with
water for a period of two week.

COLOR WORK
37 Applying two coats of Birla or Asian acrylic 8147.09 47.88 M2 390082.67
lapy ( putty) & two coats of primer of
approved brand and manufacture on new
wall surface to give an even shade including
thoroughly brushing the surface free from
mortar dropping and other foreign matter and
sand papered smooth.
Location: Inside all walls & ceiling
38 Wall painting (two coats) with plastic emulsion 3174.14 54.32 M2 172419.28
paint of approved brand and manufacture on
undecorated wall surface to give an even
shade including throughly brushing the
surface free from mortar droppings and other
foreign matter and sand papered smooth. -
Extra over item for painting with plastic
emulsion paint of approved brand on ceilings
and sloping roofs

39 Wall painting (two coats) with plastic emulsion 4972.95 50.99 M2 253570.72
paint of approved brand and manufacture on
undecorated wall surface to give an even
shade including throughly brushing the
surface free from mortar droppings and other
foreign matter and sand papered smooth.

ROOF
40 Structural steel work ( Confirming to IS 4923- 30250.00 115.70 Kg. 3499925.00
1997) riveted, bolted or welded in builtup for
all type sections, in framed work, including
cutting, hoisting, fixing in position and
applying a priming coat of approved steel
primer all complete as per the structural
designs and directions of Engineer in
charge.Column ( 122 x 61 x 3.6mm )

Page 291
41 Providing corrugated G.I. sheet of class-3 875.00 774.27 M2 677486.25
roofing fixed with glavanished iron J or L
Hooks, Bolts and nuts 8mm diameter with
bitumen and G.I. limpet washer or G.I. limpet
washer. filled with white lead complete
excluding the cost of purlins, Rafters and
Trusses.(1) 0.80 mm thick sheet. (upto 10
ton)
42 Providing ridges or hips 600 mm overall in 19.80 479.18 M2 9487.76
plain G.I. sheet class-3 fixed with G.I.J. or L
Hooks and nuts 8mm dia G.I. Limpet and
bitumen washer complete. (1) 0.80 mm thick
sheet. (upto 10 ton)
43 Providing and fixing 150mm wide 450mm 39.60 390.66 M2 15470.14
over all semicircular plain G.I.sheet class-3
gutter with Iron brackets 40mm x 3mm size
Bolts, Nuts, washers etc. including making
necessary connection with rain water pipes.
(i) 0.80 mm thick Sheet. (upto 10 ton)
44 Providing and fixing M.S. Fan clamps type 1 80.00 82.22 Each 6577.60
to 16mm dia M.S. bar bent to shape with
hooked ends to R.C.C. slabs curing, laying
including painting the exposed portion of
loops, all as per standard designe complete
PLUMBING & SANITARY ITEMS
45 Providing and fixing to wall, ceiling and floor 40.00 155.13 Rmt. 6205.20
galvanised Mild steel tubes (Medium grade)
of the following nominal bore, tube fitting and
clamps including making good the wall ceiling
and floor.(A) 15mm (upto 10 ton)
46 Providing and fixing to wall, ceiling and floor 30.00 268.48 Rmt. 8054.40
galvanised Mild steel tubes (Medium grade)
of the following nominal bore, tube fitting and
clamps including making good the wall ceiling
and floor.(C) 25mm (upto 10 ton)
47 Providing and fixing to wall ceiling and floor 50.00 253.91 Rmt. 12695.50
10.0 Kg. F/Cm2 working pressure polythene
pipes of the following outside Dia. Low
densidy, complete with special falnge
compression type fittings, wall clipsetc.
including making good the wall ceiling and
floor.(F) 75mm
48 Providing and fixing to wall ceiling and floor 50.00 322.61 Rmt. 16130.50
10.0 Kg. F/Cm2 working pressure poluthene
pipes of the following outside Dia. Low
densidy, complete with special falnge
compression type fittings, wall clipsetc.
including making good the wall ceiling and
floor.(G)110 mm
49 Providing and fixing in position cowel went to 6.00 367.99 Each 2207.94
pipes.(B) 75mm dia.
50 Providing and fixing wsh down water closet 12.00 889.82 Each 10677.84
(European type, W.C. Pan) with integral P or
S trap including jointing the trap with soil pipe
in Cement Mortar 1:1 (1-Cement : 1-fine
sand) (Seal and cover to be measured and
paid for separately)(A) vitreous China Pattern
:(i) in white colour
51 Providing and fixing 100mm size P or S trap 12.00 120.22 Each 1442.64
for water closet squatting pan including
jointing the trap with the pan and soil pipe in
cement Mortar 1:1 (1-Cement : 1-Fine
sand)(A) Vitreous China.
52 Providing and fixing in Cement Mortar 1:3 (1- 12.00 86.84 Each 1042.08
Cement : 3-coarse sand)a, pair of white
vitreous China 250mm x 130mm x 30mm
footrest to long pattern squatting pan water
closet.

Page 292
53 Providing and fixing 12.5 Litres low level 12.00 2104.75 Each 25257.00
flushing cistern with a pair, of C.I. or Mild
brackets, complete with fittings such as lead
valve less syphon, 15mm nom.nal size brass
ball valve with polythene float, C.P brass
handle unions and couplings for connections,
with inlet, outlet and overflow pipes, 40mm
dia. porcelain enamelled flush bend including
cutting holes in walls and making good the
same connecting the flush bend with cistern
and closet (overflow pipe to be measured and
paid for separately)(A) Vitreous China (I) In
white colour
54 Providing and fixing in position with clamps 36.00 292.37 Rmt. 10525.32
etc. 32mm nominal internal diameter
galvanised steel tube flush pipe for high level
flushing cistern including connecting the flush
pipe with cistern and closet and making good
the walls and floors.
55 Providing and fixing G.I. inlet connection for 12.00 24.76 Each 297.12
flush pipe with W.C. Pan
56 Providing and fixing plastic seat and cover for 12.00 339.38 Each 4072.56
wash down water closer with C.P. brass
hinges and rubber buffers. (B) Black plastic
seal and cover.
57 Providing and fixing washbasin with single 14.00 956.75 Each 13394.50
hole for pillar tap with C.I. or M.S. brackets
painted white including sutting holes and
making good the same but excluding
fittings.(A) Vitreous China:(ii) Flat Back
washbasin 550 mm x v 400mm size. (i) In
white colour.
58 Providing and fixing Kitchen sink with C.I. or 1.00 1960.19 Each 1960.19
M.S. brackets, painted white including cutting
holes in walls and making good the same but
excluding fittings. (C) Vitreous China Sink.(i)
600mm x 450mm x 150mm size

59 Providing and fixing C.P. brass waste for 15.00 79.26 Each 1188.90
washbasin or sink. (A) 32mmdia.
60 Providing and fixing M.I. fisher union for 15.00 86.93 Each 1303.95
washbasin or sink. (A) 32mm dia.
61 Providing and fixing 100mm sand cast iron 12.00 43.57 Each 522.84
grating for gully, floor or Nahni trap.
62 Providing and fixing C.P. brass shower rose 1.00 328.44 Each 328.44
with 15mm or 20mm inlet.(A) 100mm dia.
Each
63 Providing and fixing 600mm x 450mm 14.00 587.44 Each 8224.16
bevelled edge mirrror of superior glass
mounted on 6mm thick A.C. sheet or plywood
sheet and fixing to wooden pluge with C.P.
brass screws and washers.
64 Providing and fixing C.P. brass towel rail 8.00 483.51 Each 3868.08
comlete with C.P. brass brackets fixed to
wooden plugs with C.P. brass scews.(B)
600mm x 20mm size.
65 Providing and fixing 600mm x 120mm glass 8.00 329.17 Each 2633.36
shelf with C.P. brass bracket and guard rail
complete mixed to wooden plug with C.P.
brass screws.
66 Providing and fixing toilet paper holder.(A) 8.00 348.26 Each 2786.08
C.P. Brass
67 Providing and fixing screw down bib taps of 40.00 217.88 Each 8715.20
following size.(B) Brass chromium plated
screws down Bib Tap. (i) 15mm dia.
68 Providing and fixing pillar tap, capstan head, 15.00 359.49 Each 5392.35
screw down high pressure with screws,
shanks and back nuts. (i) 15mm dia.

69 Providing and fixing brass screw down stop 5.00 239.66 Each 1198.30
tap.(A) 15mm dia.

Page 293
70 Providing and fixing brass screw down stop 5.00 257.49 Each 1287.45
tap.(C) 25mm dia.
71 Providing and fixing Gun metal check or non- 5.00 490.22 Each 2451.10
return fullway wheel valve.(C) 25mm dia.
72 Providing and fixing Gun metal check or non- 5.00 366.43 Each 1832.15
return fullway wheel valve.(D) 32mm dia.
73 Providing and fixing chromium plated brass 12.00 277.30 Each 3327.60
half trun flush cock of approved quality
including fixing in pipe line etc. complete.(ii)
25mm dia.
74 Providing and fixing chromium plated brass 12.00 321.86 Each 3862.32
half trun flush cock of approved quality
including fixing in pipe line etc. complete.(iii)
32mm dia.
75 Providing and fixing Urinal of approved quality 22.00 984.64 Each 21662.08
including connection with trap and with
integral longitudinal flush pipe.(A) Squating
plate pattern white earthenware 550mm x
300mm.
76 Providing and fixing Rubber plug for sink or 15.00 20.24 Each 303.60
wash basin.
77 Providing and fixing chromium plated, bottle 15.00 272.35 Each 4085.25
trap with necessary couplings of approved
quality for wash basin.
78 Providing and fixing ball cock of approved. 1.00 155.49 Each 155.49
quality as directed.(A) Copper Metal (i)
25mm dia.
79 Providing and fixing ball cock of approved. 1.00 220.85 Each 220.85
quality as directed.(A) Copper Metal (ii)
50mm dia.
80 Providing and fixing C.I. Manhole cover 0.60 5.00 1117.10 Each 5585.50
M. x 0.45M. size having weight not less than
35Kg.
81 Providing and fixing G.I. Rain water spout of 10.00 101.02 Each 1010.20
50mm dia. and 30cm. length.
82 Providing and fixing concealed center point to 30.00 130.87 Rmt. 3926.10
wall ceiling & floor CPVC (SDR 13.5) PIPE
having National Sanitation Foundation (NSF)
seal for potable water of following dia.
nominal bore tube fittings and clamps
including making good the wall, ceiling and
floor etc. complete.[A] 15 mm.
83 Providing and fixing concealed center point to 30.00 218.61 Rmt. 6558.30
wall ceiling & floor CPVC (SDR 13.5) PIPE
having National Sanitation Foundation (NSF)
seal for potable water of following dia.
nominal bore tube fittings and clamps
including making good the wall, ceiling and
floor etc. complete. [C] 25 mm.
84 Providing laying and jointing in true line and 30.00 108.36 Rmt. 3250.80
level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for
cold water including fittings make PRINCE /
SUPREME / ASTRAL / FINOLEX or
equivalent as approved by Engineer In
Charge. Pipe shall be fixed on the wall with
the help of clamp at every two metre C/C or
shall be concelled as directed including
necessary fittings etc. including testing of pipe
and joints and fixing the same with adhesive
solvent, including cost of all materials.

Page 294
85 Providing laying and jointing in true line and 30.00 140.59 Rmt. 4217.70
level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for
cold water including fittings make PRINCE /
SUPREME / ASTRAL / FINOLEX or
equivalent as approved by Engineer In
Charge. Pipe shall be fixed on the wall with
the help of clamp at every two metre C/C or
shall be concelled as directed including
necessary fittings etc. including testing of pipe
and joints and fixing the same with adhesive
solvent, including cost of all materials.

86 Providing laying and jointing in true line and 30.00 230.90 Rmt. 6927.00
level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for
cold water including fittings make PRINCE /
SUPREME / ASTRAL / FINOLEX or
equivalent as approved by Engineer In
Charge. Pipe shall be fixed on the wall with
the help of clamp at every two metre C/C or
shall be concelled as directed including
necessary fittings etc. including testing of pipe
and joints and fixing the same with adhesive
solvent, including cost of all materials.

87 Providing, laying and jointing in true line and 30.00 926.87 Rmt. 27806.10
level 110 diametre U.P.V.C (Type B)
conforming to IS 13592-1992 with one end
plain and other end socketed with rubber ring,
& fittings conforming to ISI 14735-1999 of
approved make for drainage system pipe line,
pipe shall be jointed with each other with
rubber lubricant, pipe shall be fixed on wall
using of PVC clamp of the size 160 mm
diametre x 210 mm length x 196 mm heigh at
every 2000 mm center to center or shall be
concealed in walls as directed including
necessary fittings such as bends, shoes etc.
including testing of pipes and joints and
jointed with adhesive solvent cement
including cost of all materials.
88 Providing, laying and jointing in true line and 30.00 1172.04 Rmt. 35161.20
level 160 diametre U.P.V.C (Type B)
conforming to IS 13592-1992 with one end
plain and other end socketed with rubber ring,
& fittings conforming to ISI 14735-1999 of
approved make for drainage system pipe line,
pipe shall be jointed with each other with
rubber lubricant, pipe shall be fixed on wall
using of PVC clamp of the size 110 mm
diametre x 149 mm length x 145 mm heigh at
every 2000 mm center to center or shall be
concealed in walls as directed including
necessary fittings such as bends, shoes etc.
including testing of pipes and joints and
jointed with adhesive solvent cement
including cost of all materials.

89 Providing and fixing PVC SWR Nahni trap IS 24.00 443.38 Each 10641.12
14735 for drain - 100 mm diameter with jali of
the following nominal diameter of self
cleansing design with C.I scread down or
hinged grating including the cost of cutting
and making good the walls.
90 Providing and fixing PVC SWR Nahni trap IS 24.00 433.91 Each 10413.84
14735 for drain - 75 mm diameter with jali of
the following nominal diameter of self
cleansing design with C.I scread down or
hinged grating including the cost of cutting
and making good the walls.
SEWERAGE ITEM

Page 295
91 Providing and laying (to level or slopes) and 30.00 233.87 Rmt. 7016.10
jointing with stiff mixture of Cement Mortar in
proportion 1:1 Selt glazed stoneware pipes
including testing of pipes and joints
complete.(B) 150mm dia. (upto 10 ton)
92 Providing and laying Cement concrete 1:5:10 30.00 164.01 Rmt. 4920.30
(1-Cement : 5-Fine sand :10-Graded stone
aggregate 40mm nominal size) bedding for
stoneware pipes of following internal
diameters with necessary formwork and
curing complete.(B) 150mm dia. (166mm
Ave. bed thickness)
93 Providing and laying lime concrete 1:2:4 (1- 30.00 250.31 Rmt. 7509.30
Lime putty :2-Fine samd : 4-Graded brick
aggregates 40mm nominal size) bedding for
stoneware pipes of following internal
diameters with necessary formwork and
curing complete.(B) 150mm dia. 450mm
width (166mm Ave. bed thickness)
94 Extra over item 24.1 for providing salt Glazed 3.00 47.51 Each 142.53
stoneware fittings.(i) Bends of required
degree (any redious) of following
nominal diameters.(B) 150mm dia. (upto 10
ton)
95 Providing and laying jointing and pointing with 30.00 137.26 Rmt. 4117.80
stiff mixture of Cement Mortar 1:1 (1-Cement
: 1-Fine sand) 150 mm internal diameter salt
glazed stoneware half round channels. (upto
10 ton)
96 Providing and fixing S.W. gully trap with C.I. 12.00 1228.05 Each 14736.60
grating brick masonry chamber and water
tight C.I. cover with frame of 300mm x
300mm size (inside) with standard weight.(i)
Square mouth traps.(B) 150mm x 100mm
size P or R type
97 Providing laying (to level or slopes) and 30.00 440.12 Rmt 13203.60
jointing reinforced concrete Light duty non-
pressure pipes I.S. class NP2 of the following
internal diameter with collars and butt ends
prepared for collar joints including testing of
joints complete.(D) 300mm (upto 10 ton)

98 Providing laying (to level or slopes) and 30.00 780.43 Rmt 23412.90
jointing reinforced concrete Light duty non-
pressure pipes I.S. class NP2 of the following
internal diameter with collars and butt ends
prepared for collar joints including testing of
joints complete.(E) 450mm (upto 10 ton)

Page 296
99 Constructing Manhole with R.C.C. top slab in 15.00 16687.17 Each 250307.55
1:2:4 mix (1-cement :2-coarse sand : 4-
graded stone aggregate 20mm nominal size)
foundation concrete 1:3:6 mix (1-cement : 3-
coarse sand :6-Brick bats 40 + 50mm size)
inside plastering 15mm thick with Cement
Mortar 1:5 (1-Cement : 5-coarse sand)
finished with a floating coat of neat cement
and making channels in cement concrete
1:2:4 mix (1-Cement :2-Coarse sand :4-stone
aggregate 20mm nominal size) finished
smooth complete including curing and festing
(i) Inside size 900mm x 1200mm and 1.5M.
deep including C.I. cover with frame size
560mm diameter total weight of cover and
frame to be not less than 128 kgs. (Wt. of
cover 64 Kg. and Wt. of frame 64 Kg.)(A)
With 230mm thick walls of brick msonry
using brick having crushing strength not
less than 35Kg. / Sq.cm. in Cement Mortar
1:5 (1- Cement: 5-Coarse sand) (2) B type
depth 1.50 Metre for 150mm diameter
sewer.

100 Providing and fixing cast iron steps of size 30.00 180.01 Each 5400.30
500mm x 150mm x 22.5mm and painting with
two coats of Anti-corrosive paint etc.
complete.
101 Supplying and fixing C.I. cover 300mm x 12.00 559.57 Each 6714.84
300mm without frame for Gulley trap
(Standard pattern) te weight of cover to be not
less 4.53 Kg.) (upto 10 ton)
102 Providing and erecting at the site of work 6.00 33037.22 Each 198223.32
steel ventilating column of 150m internal
diameter and 12.20 Metre High from G.L. to
bottom of top grill including C.I. grill and base
plate bolts and nuts etc. and excavation in
foundation of size 120cm. x 120vcm. x
165cm. and filling the pit with first layer of
cement concrete 1:3:6 mix (1-cement :3-
coarse sand :6-graded stone aggregate
20mm nominal size) of 120cm. x 120cm. x
90cm. and remaining pit with B.B.C. 1:3:6 mix
(1-cement :3-coarse sand:6-Brickbats
40+50mm size) and providing fillet in Cement
concrete 1:2:4 mix (1-cement :2- coarse sand
:4-graded stone aggregate 20mm. nominal
size) at G.L. and 3 coats of silver paint etc.
complete. (upto 10 ton)

103 Constructing Brick masonry road gully 12.00 1599.90 Each 19198.80
chamber 500mm x 450mm x 600mm
including 500mm x 450mm C.I. horizontal
grating wih frame complete. (upto 10 ton)

Page 297
104 Constructing brick masonry chamber for 5.00 7179.82 Each 35899.10
underground C.I. Inspection chamber and
bends with briocks having croshing strength
not less than 35Kg. Cm2 in C.M. 1:5 C.I.
cover with frame (Light duty) 455mm x
610mm intenal dimensions total weight of
cover with frame to be not less than 38Kg.
(Wt. of cover 23 Kg.) and Wt. of frame 15Kg.
) (R.C.C. top slabe with 1:2:4 mix (1-cement
:2- coarse sand :4-graded stone aggregate
20mm size) foundation concrete 1:5:10 inside
plaster 15mm thick with cement mortar 1:3
finished smooth with a floating coat of neat
cement on walls and bed concrete etc.
complete.(iii) Inside dimensions 600mm x
mm and 450mm deep for pipe lines with
three or more inlets. (upto 10 ton)

105 (B) Providing sock pit of 5.00 Cu.M. Volume 3.00 2357.31 Each 7071.93
including excavating and filling brickbats with
dry masonry work at top for 45cm. height
including covering the top with stone including
providing vatas in C.M. 1:3 with finishing
curing etc. complete as directed. (upto 10 ton)

MISCELLANEOUS BUILDING ITEM

106 Constructing a cooking platform 60 cm. width 2.10 1943.11 Rmt 4080.53
and 70 cm high resting on B.B.Masonry walls
23 cm.thick in C.M.(1:6) with (ii) Fixing black
kadappa stone 30mm thick laid on precast
R.C.C. (1:2:4) slab with plastering on
exposed faces of wall in C.M. (1:4) etc
complete.

107 Providing erecting and fixing double coated 10000.00 4.66 Ltr 46600.00
Syntex PVC. (ISI) water tank of required
capacity each with all necessary fittings and
connection etc. complete on terrace.
108 Construction of Septic Tank (1.80 m x 1.20 m 6.00 16399.37 Each 98396.22
x 1.5m clear) in all aspects incl excavation
,P/L 150 mm thick BBCC 1:4:8 in foundation,
230 mm thick brick wall in C.M. 1:5, 125 mm
thick RCC top slab, 15 mm thick cement
plaster in CM 1:3 with floating coat of neat
cement slurry inside and 40 mm thick IPS in
CC 1:2:4 and inlet & outlet ,Req.beam
,Partition walls etc complete

ROAD WORK
109 Earth Work in cutting in all sorts of soils 635.64 81.32 M3 51690.24
& soft murrum incl. conveying & spreading
the stuff in embankment as & where directed
within 200 mt. lead from the edge of cutting
with all required lift etc. complete.

110 Supplying of crushed stone aggregates, 171.30 322.19 M3 55191.15

chippings etc. of hard stone of following
nominal size free of disintegrated pieces
deletarious and oraganic mater (for Bitumen
surface dressing etc.) and grading as per
I.R.C. Code.(ii) 40mm
111 Supplying of crushed stone aggregates, 85.65 369.66 M3 31661.38
chippings etc. of hard stone of following
nominal size free of disintegrated pieces
deletarious and oraganic mater (for Bitumen
surface dressing etc.) and grading as per
I.R.C. Code.(iii) 25mm

Page 298
112 Spreading the stone aggregate for rolling 283.50 158.39 M3 44903.57
and W.B.M. including filling the interstices to
required camber and gradient (excluding
spreading of Blindage)(iii) 25mm to 50mm
size crushed stone
113 Rolling and consolidating water bound 1890.00 12.55 M2 23719.50
macadam (except laterite and Kankar)
including watering not exceeding 150mm
thickness (Main layer including binding
materials ) including filling in depressions
which occur during the process.(A) With
power roller exceeding 8 tonne and not
exceeding 12 tonne.
114 Providing and laying cement concrete 1:3:6 479.72 2210.29 M3 1060320.32
(1-Cement : 3- coarse sand : 6- hand broken
stone aggregates 40 mmnominal size) and
curing complete excluding cost of formwork in
(A) Foundation and Plinth FOR ROAD (upto
10 ton)
115 Providing and laying controlled cement 330.00 3483.74 M3 1149634.20
concrete M.250 and curing complete
excluding the cost of formwork and
reinforcement for reinforced concrete work in
(A) Foundations, footings, Base of columns
and Mass concrete FOR ROAD. (upto 10
ton)
116 Compaction and finishing of cement concrete 1650.00 49.89 M2 82318.50
road by trimix process providing extra labour
charges for the trimix vacum dewatering
service process on cement concrete road
surface by using vacum dewatering pump
floater surface vibrator including making
groves and rough finish to surface as per in
including levelling the complete.

117 Providing and fixing in 25mm expansion 49.95 829.21 M2 41419.04

joints, Premolded Compressible fibre board
made from Polymer based in black colour
approved make Supreme or equivalent
(Polyurethane foam filler) of the best quality,
including in all shapes and all levels etc.
complete as directed by Engineer-in-Charge
and as per specification.
118 Providing and filling the expansion joints for 333.00 425.21 Rmt 141594.93
25 mm width & 12 mm depth, with
polysulphide sealant with application of primer
including scraping / removing the expansion
filler materials from joints, cleaning, repairing
of the edges with epoxy mortar of approved
color and make, fixing of abro tapes on the
edges to prevent the adjoining surface, etc.
complete as directed by Engineer-in-Charge.
The contractor should furnish a guarantee of
10 years as directed.

119 Providing formwork of ordinary timber 147.00 42.73 M2 6281.31

planking so as to give a rough finish including
centering shuttering strutting and propping
etc. height of propping and centering below
supporting floor to ceiling not exceeding 4 M.
and removal of the same for in situ reinforced
concrete and plain concrete work in. (I)
Edges of slabs and Breaks in floors and
walls. (upto 10 ton)

120 Providing TMT Bar FE 500/500D 16500.00 45.48 Kg. 750420.00

reinforcement for R.C.C. work including
bending, binding and placing in position
complete upto floor two level (upto 10 ton)

Page 299
121 Providing and fixing pre-cast Rubber Dye 2347.60 673.70 M2 1581578.12
inter locking concrete block 60mm thick with
grade of concrete M250 pnumatic
compressed by mechanically pressed and as
per approved design including 75mm Sand
layer for levelling and filling the joint with sand
in proper line and level etc complete.

122 Providing and laying polished Kota stone slab 119.92 643.40 M2 77156.53
flooring over 20mm (Average) thick base of
cement mortar 1:6 (1-cement : 6-coarse
sand) or L.M. 1.1.5 laid over and jointed with
grey cement slurry including rubbing and
polishing etc. complete. (B) 30 mm thick (upto
10 ton)
123 Providing and laying polished kota stone slab 77.44 683.82 M2 52955.02
25mm thick in risers of steps,skirting Dedo
and pillars laid on 10mm thick cement mortar
1:3 (1-Cement : 3 coarse sand) and jointed
with gray cement slury mixed with pigment to
match the shade of slab including rubbing and
polishing etc. complete. (upto 10 ton)

124 TOUGHENED GLASS PARTITION (Curtain 134.87 4686.40 M2 632054.77

wall )
Providing and fixing 12 mm thick toughened
glass make of , asahi, equivalent , The Frame
work made out of the providing and fixing
aluminum profile of size of 35 mm to 40 mm X
25m to 35 mm on all the four side of the
Glass partition at the floor level , Bottom, Side
and Top , and top of the ceiling , the top
frame to be fixed with on the Original RCC
ceiling with required MS Frame Work to take
care of the Load of the Glass Panel / between
the two glass the Glass to be fixed with
aluminum Profile of Size 35mm to 40 mm X
25 to 35 mm finished with powder coated
finish also the gap between If required the
clear Silicon to be fill between the Aluminum
profile and toughened Glass to filling Clear
silicon on the both side of the partition and the
Glass partition bottom should be provided
with Aluminum section of Size 35 mm to 40
mm X 25 mm Height prepare the surface
properly to fix the 12 mm thick toughened
glass , and Above the false ceiling the Proper
MS Section support to be Made to fix the
Toughened Glass / or the above false ceiling
the frame made out of MS Section to fix the
Aluminum Section on the top of the ceiling on
the ceiling and the top channel should be
fixed with suitable MS Angle from the RCC
ceiling . The all the gap to be filled with silicon
as approved color and shade. Agency need to
use strictlygeneral
125 Applying the aluminum section pest
insecticide make control
of 1500.00 68.46 M2 102690.00
treatment to floors, cupboards etc including
labour material etc. complete. Using
Heptachloride 20 EC. As Per 6113_pests
Consentration Weight 0.50 percent is
recommended one litre chemical emulsion
dillute with 39 liter of water will give. Total
dillute concrentration will be 40 litre inclusive
of one litre chemical emulsion appication 0.5
Litre chemical / Sqm of surface is
recommended as per I.S
126 Providing and fixing Glass bricks Partition 66.00 3530.96 M2 233043.36
using glass brick of required design ,type size
of glass brick 19 x 19 Cm and fixing the same
with 4 mm dia alluminium bar at every 3 rd
layer with white cement etc complete.

Page 300
127 Providing supplying and fixing of approved
quality / make executive auditorium chair with
handle and self tip up mechanism seat and
back frames shall be made out of ERW tube
fabric shall be of approved quality make and
shade. Arm rest with / without cup holder in
graded plastic, Flexible PU FOAM is
Automotive Grade High Resilience-HR
Polyurethane foam of density : 48 + / - 5 kg /
M3. Thickness Cushion - 130 + 20 mm;
Backrest - 80 + 10 mm, Hardness : Cushion :
120 (+ 30 / - 20) Newton; Backrest : 80 (+ 30 /
- 20) Newton, all the metal parts to painted
with electrostatic powder epoxy with coating
thickness of 70-80 microns and 100% grid
adherence., FABRIC: Heavy duty 100 %
polyester dyed yarn with 3 mm ± 0.5 mm
foam backing, seating arrangement
numbering shall be clearly visible and of
approved make. Centre to centre dimension
of the chair is 500 mm to 550 mm and Full
height from floor level is 980 mm to 1020 mm.
All structural connections, tapestry cushion
etc. shall be as per Detail specification /
Architects details and shall be as instructed
by the Engineer - in - charge or his authorized
consultant.

A VIP Semi Recliners Auditorium Chairs -(Push 112.00 6514.50 Each 729624.00
Beck seat) (approved make :- URJA /
INNOVATIVE) (MR)
B Pushback with auto tip -24" (approved make :- 588.00 4858.10 Each 2856562.80
URJA / INNOVATIVE ) (MR)
GENERAL ELECTRICAL WORK
MODUALAR TYPE POINT
WIRING(Concealed type )
128 Point Wiring for Light / Bell with 2-1.5 sq.mm 850.00 424.20 Pt. 360570.00
& erthwire of 1.5 sq.mm. (green) both are of
ISI marked 1.1KV grade FR PVC insulated
multistrand copper wires, in exesting pipe
duly erected, complete with 6A Modular Type
switch / bell push and accessories and earth
continuity of following type ,erected on PVC /
Metalic box covered with appropriate front
plate modules erected on /in wall /ceiling
concealed in wall / ceiling as per pipe erected
Single mounting base frame & Textrued /
Metalic front plates. Cat-III i) Light point
129 Point Wiring for FAN with 2-1.5 sq.mm & 35.00 606.00 Pt. 21210.00
erthwire of 1.5 sq.mm. (green) both are of ISI
marked 1.1KV grade FR PVC insulated
multistrand copper wires, in exesting pipe
duly erected complete with 6A Modular Type
switch and hume free EME four or more step
type electronic fan regulator with separately
mounted and accessories and earth continuity
of following type ,erected on PVC / Metalic
box covered with appropriate front plate
modules erected on /in wall /ceiling concealed
in wall / ceiling as per pipe erected Single
mounting base frame & Textrued / Metalic
front plates. Cat-III

Page 301
130 Point Wiring for LOOPED PLUG with 6 A 50.00 242.40 Pt. 12120.00
Modular type Switch and 5 Pin Socket
erected on PVC / Metalic box covered with
appropriate front plate modules erected on /
in wall / ceil;ing with following type of
accessories. Single mounting base frame &
Textrued / Metalic front plates. Cat-III.
131 Point Wiring for INDIVIDUAL PLUG with & 245.00 449.45 Pt. 110115.25
earth wire of 1.5 sq.mm (green) both are of
ISI marked 1.1KV grade FRPVC insulated
multistandard copper wires, in existing pipe
dully erected compete with Modular type 6A
Switch and 5 Pin plug Socket erected on
PVC / Metalic box covered with appropriate
front plate modules erected on / in wall /
ceil;ing suitable for following type of
accessories. Cat-III. (I) suitable for 6A plug
with 2-1.5 sq.mm Cu wire with medium class
rigid PVC pipe and accessories and Single
mounting base frame & Textrued / Metalic
front plates. Cat-III.
132 Providing & Erecting Mains with 1.1 KV grade 1000.00 80.80 Rmt. 80800.00
FRPVC insulated ISI marked stranded
Copper conductor wire in existing pipe
erected with 1.5 sq. mm copper conductor FR
PVC insulated stranded wire of green colour
for earth continuity of following size. (From
DB to Switch borad lighting Cicuit + 16A
power plug+ water cooler) 2 wire 2.5
sq.mm
133 Providing & Etecting Mains with 1.1 KV grade 1200.00 111.10 Rmt. 133320.00
FRPVC insulated ISI marked stranded
Copper conductor wire in existing pipe
erected with 2.5 sq. mm copper conductor FR
PVC insulated stranded wire of green colour
for earth continuity of following size.(For A.C
point) 2 wire 4 sq.mm
134 Providing & erecting 1.5 mm. thick and ISI 2200.00 32.32 Rmt. 71104.00
marked RIGID PVC pipe of 25 mm diameter
size compete erected with necessary PVC
fitting & junction boxes fixed with adhesive
solution & clamps & erecting concealed in
wall / slab laid in approved manner with
plastering by cement mortar & finishing the
surface to match the wall / ceiling.
135 Providing following type of Modular type
Accessories mounted with pvc / metallic box
covered with approprite front plate moudules
erected with necessary connection. As desire
by Engineer incharge.
(a) (a) 16Amp. SP one way switch. Cat.III 30.00 181.80 No. 5454.00
(b) (b) 6/16 Amp. Universal socket. Cat- III 40.00 202.00 No. 8080.00
(c) (C.) 6A to 32A/ Double Pole Modular MCB 20.00 414.10 No. 8282.00
Switsh Cat.-III (for A.C.)
FANS & FITTINGS
136 Providing & erecting approved make POWER 20.00 2090.70 No. 41814.00
SAVING 50 watt Ceiling FAN with double ball
bearing ISI mark with condesor A.C 230 V
50 Cys. 1200 mm sweep complete canopy
and 30 cms down rod erected on exisating
hook or clamp with 24 /0.2, 3 3 core flexible
copper wire with earthing.(Havells, Orient
Crompton, Anchor, Bajaj, Usha)

Page 302
137 Providing & erecting approved make Ceiling 10.00 1868.50 No. 18685.00
FAN with double ball bearing ISI mark with
condesor A.C 230 V 50 Cys. 1400 mm
sweep complete canopy and 30 cms down
rod erected on exisating hook or clamp with
24 /0.2, 3 3 core flexible copper wire with
earthing.
138 Suppying & erecting Fan hook box of 10 mm 30.00 126.25 No. 3787.50
M.S. round bar bounded to the RCC bars up
to 50 mm length each side and pierced
through a 16 Gauge M.S. box / Heavy duty
PVC box complete erected concealed in
Ceiling with necessary finishing.
139 Providing and erecting wide spread mirror 60.00 2171.50 No. 130290.00
optic recessed mounting fl. Fitting with tube
Rod & HFHC Electronic Ballast with THD less
than 10 complete with holder with lead wire
and connection suitable for 2no x 24/ 28 W -
T5 tube Cat - III
140 Suppling and erecting approved make of 60.00 565.60 No. 33936.00
fitting & tube fitting with One no - T-5 tube 24
/ 28 W with HFHC Electronic ballast with
THD less than 10 & built in adoptors, GI/PVC
housing & mirror effect reflector, suitable to
work on 120V - 300V A.C. supply with
connector Cat:III
141 Suppling and erecting single phase approved 20.00 2424.00 No. 48480.00
make fresh air cum exaust fan suitable for
midium duty ring mounted low noise operation
suitable for medium duty having 305 mm dia.
Of 900 RPM speed. Cat - II
142 Supplying and erecting approved make 20.00 2989.60 No. 59792.00
oscillating type bracket fan A.C. 23OV. 50cy/s
400/450 mm sweep wall mounted with height
adjustment and rotary tilting device complete
with guard, flexible Core plug top complete
erected with lead wires as directed.
143 Supplying and erecting approved make 20.00 4747.00 No. 94940.00
Pedestal Air-Circulator fan A.C. 230 V. 50
Cy/s. 600 mm sweep and adjustable height
complete with guard, & standard lead flexible
wires and plug top.
ELECTRIC PANEL BOARD

Page 303
144 Providing & erecting weather proof , dust & 3.00 17584.10 Sq.mt 52752.30
vermin proof, floor mounted front operated r.
cubical panel board having IP 64 protection
made from 14 SWG thick CRC MS sheet for
outer body & doors, 16 SWG thick CRC M.S.
sheet for internal partition with necessary
supporting angles, flats including cutting,
bending, drilling, welding, reveting with
internal partitions & cable alley as per
requirements & instruction of engineer-in-
charge with erection of supplied switch gears,
busbars, with suitable size of inter connecting
PVC copper wire / copper-alluminium strips,
rubber grommets, ribs, backlite control fuses
for measuring instruments, earth bus & earth
bolts, foundation flange - bolts - base Plates,
sufficiants nos. of hinged doors, handles with
locking arrangement and rubber gasket
complete. The Panel shall be painted with
epoxy powder coating. (The rates excludes
the cost of switch gears, bus,bars,
interconnecting mains & Copper Aluminium
strips, meters, Fuses etc. The dimention shall
be measured excluding base beams).The
panel shall be supplied with following
approved manufacturers with 350 mm depth
145 Supplying and erecting tripple pole & neutral 10.00 1858.40 Rmt. 18584.00
440V / 500V panel mounting copper Busbars
with four equal Nos. of electrolyte bus having
current densicity not more than 1.6 Amp /
sq.mm (Rated current / cross section area)
duly wraped with colour insulating tape for
phase sequence of 100 A current carrying
capacity, erected witjh necessary bus bar
supports / insulators, main cable socket to
each bar, erected in existing cubical pannel
with necessary connections. suitable for
equivelent load capacity.
146 Providing & erecting of approved make Four 2.00 16665.00 No. 33330.00
pole moulded case circuit breaker having
breaking capacity ICU of 35 K.A. at 415 V,
having normal current rating up to 200A. With
variable & magnetic release suitable to work
on A.C. supply 50 cys. With all internal
connections & complete erected in above
panel Cat - III (For Main incoming supply)
147 Providing & erecting of approved make Three 8.00 3181.50 No. 25452.00
phase & nuatral LT heavy duty switch
Disconnector fuse unit cubical type for panel
mounting complete with operating
michenisum suitable to operate on 440 V A.C.
23A duty with HRC fuses of 63A rating
suitable to confirtiming I.S. 13947 (I & III) Cat-
III.
148 Suppling & erecting approved make Analog 4.00 424.20 No. 1696.80
type voltmeter moving iron with square /
Round Dial, flush / pedestal mounting pattern
for A.C. Voltage 0 to 500 Volt range,erected
on panel board with all connection, wiring etc.
149 Suppling & erecting approved make Analog 2.00 1868.50 No. 3737.00
type moving iron C.T. operated Ammeter
A.C. Current Suitable slide inscale 0-400
Amp. with 3 Nos. of current Transformer
erected on pannel board with connections.

Page 304
150 Suppling and erecting Ammeter / Voltmeter 4.00 373.70 No. 1494.80
selector switch for 3 phase A.C. Supply 500 V
on existing panel board with necessary
connections.
151 Suppling and erecting approved make set of 6.00 126.25 No. 757.50
indicator LED type lamps lense cover,bakelite
holder complete erected with necessary
connections.
DISTRIBUTION BOARD
152 Providing and erecting Sheet Steel powder
coated MCB distribution board- flush / surface
mounted fitted with busbar, neutral link, earth
bar and DIN rail, confirming to IS 13032 and
BS 5486-1986 without MCB to house
appropriate nos. of MCBs suitable for
following size.
(J)) Three phase 4 way SS double door for single 8.00 2020.00 No. 16160.00
phase out going horizontal box.( 1 No. for
workshop & 1 no for 2 nd floor lighting
distribution)
(L) Three phase 6 way SS double door for single 4.00 2514.90 No. 10059.60
phase out going horizontal box.( 1 No. for
workshop )
(N) Three phase 8 way SS double door for single 4.00 2949.20 No. 11796.80
phase out going horizontal box.(For lighting
distribution(Ground floor )
153 Providing & erecting of approved make 6.00 3585.50 No. 21513.00
ELCBs /RCCBs confirming to IS: 12640 and
having sensivitive of 30 mA and short circuits
withstand capacity of 6KA and suitable for
operation on three phase and neutral 415V
having charestrics of quick action & tripping
with all advance feature & do not in corporate
any electronic component for 63 A FP erected
as directed.(Cat-III) ( I st floor lighting DB + 1
no II nd floor DB)
154 Providing & erecting of Miniatuer circuit 80.00 116.15 No. 9292.00
braeker single pole 6A to 32A suitable to
operate on 240 V A.C. system and having
having breaking capacity 10 KA to be erected
in existing box confirming to IS 8828 / 1996
with ISI mark (Cat-III)
155 Providing & erecting 415V MCB Four pole for 20.00 686.80 No. 13736.00
motor & inductive load (C curve) having 10
KA breaking capacity & confirming to IS 8828
/ 1996 in existing box having following
capacity:with ISI mark (Cat-III) (b) 40 Amp
Cat-III) ( 8 nos - DB work shop )
156 Providing & erecting floowing capacity Three
pole MCB Isolator A.C. 22 duty confirming to
IS 13947-3 in existing box
(a) 40 Amp Cat-III) ( 8 in work shop + 1 no II nd 15.00 484.80 No. 7272.00
floor DB)
(b) 63 Amp Cat-III) ( 1 no First floor DB + 2 no 10.00 555.50 No. 5555.00
work shop DB))
CABLES & CABLE TERMINATIONS :
157 Providing and erecting XLPE (IS : 7098)(I)-88
ISI marked armoured Al.conductor cable for
1.1KV to be laid on wall with necessary
clamps or in existing cable trench / pipe or
floor for following size cable:
(A-I) Suitable for 3.5 core 35 Sq.mm.(16 Sq. mm. 250.00 272.70 Rmt. 68175.00
1/2 core)
(D) Suitable for 3.5 core 95 Sq.mm.(50 Sq. mm. 100.00 621.15 Rmt. 62115.00
1/2 core)

Page 305
158 Providing and erecting XLPE (IS : 7098) (I)-88 200.00 787.80 Rmt. 157560.00
ISI marked armoured cable multistrand
Copper conductor for 1.1 KV to be laid on wall
with necessary clamps or in existing cable
trench / pipe or floor or ceiling for 4 core 10
sq. mm cable. ( From DB to M/c s location in
workshop - 8 location)
159 Providing & erecting heavy duty flange type
brass cable GLAND with rubber for PVC
insulated armoured cable complete without
going tail insulating tape etc for following size
of cables.
(B) 3.5 core 35 sq.mm cable ( 3 nos - Panel end 6.00 80.80 No. 484.80
+ 2 nos - DB end+ 1 no II nd floor DB)
(D) 3.5 core 95 sq.mm cable ( 1 no meter end + 1 2.00 141.40 No. 282.80
no Panel end)
160 Providing & erecting Solderless crimping type
Aluminium LUGS comfirming to IS suitable for
cable of following size evenly crimped with
high presuure tool and connected to switch
gear terminals with brass / cadmium plated
nut bolts in an approved manner.
(E) 35/50 sq.mm cable ( 3 nos - Panel end + 2 40.00 20.20 No. 808.00
nos - DB end+ 1 no II nd floor DB)
(G) 95 sq.mm cable ( 4 no meter end + 4 no 10.00 40.40 No. 404.00
Panel end)
161 Providing & erecting Solderless crimping type 40.00 10.10 No. 404.00
COPPER LUGS comfirming to IS suitable for
10 sq.mm copper cable evenly crimped with
high presuure tool and connected to switch
gear terminals with brass / cadmium plated
nut bolts in an approved manner.
162 Providing & erecting Meter Cover made from 1.00 3939.00 Sq.mt 3939.00
multi chamber hollow PVC sections of 20 mm .
thick having all the corner joints with PVC
solution angles without using any screws,
nails shutters having required size of eye
glass and with necessary locking arrangment
hinged with box, The back of metter box
should be fixed with timber. Hold fast for
holding screws or nut bolts.(For Main meter )
163 Providing & erecting approved make Triple 1.00 9453.60 No. 9453.60
Pole Metal Clad Switch Fuse Unit 415/500 V
with HRC fuse of sauitable load and neutral
link confirming to ISS of 200 A rating.( meter
end) Cat - III
164 For erection & connection charges for 200A 1.00 232.30 No. 232.30
HRC TPN switch as above on angle iron frme
dully painted with red oxide & colours..
TELEPHONE POINT
165 Suppling & erecting Delton or approved make 200.00 30.30 Rmt. 6060.00
un armoured Telephone Cable electrolytic
grade annealed copper conductor insulated
with PE insulation twisted in to pairs &
wrapped with FR PVC tape & sheateed with
FR PVC or HFFR outer jacket suitable for
telephone wiring & confirming to C-DOT
erected in existing pipe of five pairs size of
conductors & nos. of pairs. With necessary
connections.
166 Providing & Erecting following Shockproof 4.00 40.40 No. 161.60
tissino type accessorieserected on 3mm thick
laminated sheet in wooden / PVC / Metal Box.
erected on wall/ ceilling . Telephone Pin,
Socket with suitable top
EARTHING & PROTECTION SYSTEM

Page 306
167 Supplying & erecting funnel type earthing 2.00 9292.00 No. 18584.00
having earth plate of following size burrid in
specifically prepared earth plt 3 mtr. below
ground with 40 kg. charcol & salt withalternate
layers of charcol & salt, 20mm. Dia. G.I. pipe
with Funnel with a wire mesh for watering &
bricks masonary block, C.I. Cover complete
as per para 7.3 of IS 3043 with neccesary
length of double G.1 / copper earth wire No. 6
SWG bolted with lug to the plate and covered
in 12 mm dia. G.I. pipe 2.5 mtr. long complete
connected to the nearest switch gear with end
socket as per direction & duly tested by earth
tester confirming to ISS (As per drawing) with
following specification. With 60 X 60 X 0.315
cms. copper earth plate
168 Prividing & erecting required size HOT deep 25.00 90.90 Kg 2272.50
Galvanised strip for earthing for main LT
panel.meter board , Motors etc.
169 Providing and erecting Annealed bare Copper 20.00 717.10 Kg 14342.00
wire 8 to 16 S.W.G.
COMPOUND LIGHTING
170 SITC of Steel Tubular Pole (SWAGED) - 410 20.00 7474.00 No. 149480.00
SP - 26 as per IS: 2713/ 1980 (Part - II) or
latest, made of steel tubes of following
dimemsions (swaged together when hot)
complete painted by one coat of red oxide
and two coat of silver/ aluminium paint,
erected with metalic base plate of size 300
mm x 300 mm x 4 mm thk., having following
specifications & as per drawing. - (1 No.)
(a) Overall length of pole : 7.50 mtrs.
(b) Planting depth : 01.00 mtrs.

(c) Height above ground level : 06.50 mtrs.

(d) Length of section - Out side dia. x Wall

thickness
Bottom : 4.50mtrs. - 114.30 mm x 4.50
mm.
Middle : 1.50 mtrs. - 88.90 mm x 4.05
mm.
Top : 1.50mtrs. - 76.10 mm x 3.25
mm.
(e) Approximate Weight of Pole : 67 Kg.
171 Providing of cement concrete foundation 20.00 1313.00 No. 26260.00
including excavation for galvanised pole with
60 cm x 60 cm (or 60 cm dia) x 120 cm deep
in 1:3:6 cement concrete, (20 mm to 25 mm
stone metel) with 30 cm x 30 cm (or 30 cm
dia) x 30 cm high cement concrete plinth with
necessary water curing & finishing in
approved manner and as per drawing & as
per instruction of Engineer Incharge. - (1 No.
Per St. Lght Pole)
172 Providing of Medium - ' B ' Class Galvanised 40.00 252.50 No. 10100.00
Iron Pipe 32 mm dia. having smooth finished
bore of the pipe on both ends, erected on the
face of pole with clamps, nuts and bolts for
laying of cable along the pole & well shaping
(1350) the pipe as per site requirement to
ease cable entry. (1.5 Mtr. long pipe per cable
entry) - (2 Nos. - Pipes for two Cable Entry
Per St. Light Pole)

Page 307
173 P & F of Heavy Duty Flanged, Double 40.00 40.40 No. 1616.00
Compression type Brass Cable Gland with
rubber ring suitable for 1 x 4.0 Core x 6 Sq.
MM PVC Insulated Alu. Armoured cable
complete with outgoing tails, insulating taps
etc. - (2 Nos. Glands Per Sintex Box on St.
Light Pole)
174 P & F of Solderless Crimping Type Aluminium 80.00 5.05 No. 404.00
Lugs (4 Nos. per termination) conforming to
IS suitable for 1 x 4.0 Core x 6 Sq. MM PVC
Insulated Aluminium Armoured cable tail
complete erected with insulating materials for
each termination. - (2 Nos. Termination Per
St. Light Pole)
175 Supplying & erecting of 150 mm x 125 mm x 20.00 722.15 No. 14443.00
100 mm size, Sintex or approved make,
composite FRP (plastic) loop in, loop out box
approx. 2.07 mm thk. complete with backelite
connector strip 4 way - 2 nos./ 8 ways - 1 no.
(incoming & out going cable), single pole 6 A
to 32 A, MCB with ISI marked suitable to
operate on 240 V, A. C. supply and having
overload & short circuit triping element and
breaking capacity 10 kA conforming to IS:
8828/ 1996 & hinged doors having locking
arrangement with mounting clamp with nuts,
bolts & washers suitable for erection on pole
with cable clamps & earth bolt. - (1 No. Per
St. Lght Pole)
176 SITC of funnel type pipe earthing having 1.50 20.00 9292.00 No. 185840.00
Mtr. Long and 25 MM dia. Medium Class
Galvanised iron pipe with coupling and buch
burried in specially prepared earth pit with salt
& charcoal complete with necessary double 8
SWG Copper earth wire - 0.8 Kg (2 x 3.5 Mtr.
= 7Mtr.) laid upto bolt fitted in pole for earthing
. (Earthing at each poles) as per drawing - (1
Job Per St. Light Pole)
SINGLE ARM BRACKET WITH
ACCESSORIES :
177 SITC of Single Arm Bracket consisting of 20.00 606.00 No. 12120.00
Light Class G. I. tube (pipe) of 4.2 cms
outside dia. complete with suitable M. S.
sleeve tubing of required size and 30 cms
length suitable for 76.5 mm/ 80.0 mm/ 88.9 or
required size of pole top having 5 nos.
fastners for fixing the bracket and having
spread of 1.0 Mtr. length with suitable welded
stifner reducer and with check nut complete
painted with one coat of red oxide and two
coat of aluminium paint suitable for side entry
fitting as per site condition and as per
drawing/ directed by Engineer Incharge. - (1
No. Per St. Light Pole)
178 Providing & Erecting of Approved make Street 20.00 3504.70 No. 70094.00
Light luminary suitable for 70 Watt HPSV
Lamp complete with control gear &
accessories operating on 200 to 240 V
A.C.Supply, aluminium housing with two
compartment duly stove enameled painted
side refl;ector protective acrylic cover
synthetic gasket cover, necessary
hardware.The fitting should be suitable for
side entry having suitable socket bore for
clamping complete erected. CAT-III. 70 Watt.

Page 308
179 Providing & Erecting of Approved make 70 20.00 464.60 No. 9292.00
Watt HPSV Lamp tubular/elliptical type
operated on 230/240/250 V.CFL CAT-III
180 Providing & erecting PVC insulated 120.00 131.30 Rmt. 15756.00
multistrand multi core 1.1 KV Grade ISI
marked 1.5 Sq.mm size 3 Core 1.5 Sq. MM.
round copper cable erected in exising pipe/ in
street light pole in Red for phase, Black for
neutral & green colour for earth continuity. -
(6.0 Mtr. per St. Light Fitting x 1 No. St. Light
Fitting = 6.0 Mtr.)
CABLE & ACESSORIES
181 Providing, laying, testing & commissioning of 500.00 131.30 Rmt. 65650.00
1 x 4.0 Core x 6 Sq. MM, XLPE (IS: 7088 (i) -
88), ISI Mark, Armoured, Multistranded,
Aluminium Conductor suitable for 1.1 kV
grade to be laid 75 Cms under ground or to
be laid on wall with necessary clamps or in
existing cable trench/ pipe at road crossing or
on floor and making the ground as per original
of the following cores and sizes of cables. -
For Streetlight between two poles & Service
Connections.
182 Providing & laying of 50 MM Nominal OD 500.00 70.70 Rmt. 35350.00
Doubled Walled Corrugated Pipes (DWC) of
polyethylene (conforming to IS 14930 - II) with
necessary connecting accessories like
coupler, Tee, L - Bow, etc. of same material
at required depth (75 cms) including
excavation for laying of cable below ground/
road surface for enclosing cable and back
filling the same to make ground as per
original & as per instruction of Engineer
Incharge - for Streelight Cable of 1 x 4 core x
6 Sq. MM and Service cable of 1 x 4 core x 6
Sq. MM.
DISTRIBUTION BOX WITH ACCESSORIES

183 Providing & Fixing of MINI Section Pillar 2.00 2222.00 No. 4444.00
having size of 60 Cm x 60 Cm x 45 Cm
fabricated from 16 SWG thick M.S. sheet and
angle iron legs 45 Cms long made from 50
mm x 50 mm x 6 mm thick M.S. angle with
cable clamps to be erected with cement
concret foundation with locking arrangement.
184 Providing & Fixing 0f backelite sheet 12 mm 0.50 131.30 Sq.mtr. 65.65
thick HYLLAM make grade : P-100 on
existing angle iron frame.
185 Providing & Fixing of approved make light 2.00 2671.45 No. 5342.90
control unit suitable to operate on 230 Volt , +/
- 20% having ON/OFF delay time of 30-50
second and having facility for auto/manually
system having two LDR Lens to intencify light
having capacity of 5 Ampere complete errect
on section pillar with pipe and stand.
186 Providing & Fixing of 3 pole power contector 2.00 3191.60 No. 6383.20
with 2 NO & 2 NC having 32 Amp. rating of L
& T, BCH, , Siemens, make.
187 Providing & Fixing of approved make Double 2.00 287.85 No. 575.70
pole MCB switch 240 volt having 10 KA
breaking capacity confirming to IS - 8828, in
existing box having capacity of 6 to 32
Ampere L series for lighting load. Cat-III.

Page 309
188 SITC of Double Compression Type Brass 7.00 40.40 No. 282.80
Cable Gland with rubber hood suitable for 1 x
4.0 Core x 6 Sq. MM., XLPE Alu. Armoured
cable complete with outgoing tails, insulating
taps etc - (two at distribution box & one at St.
Light Pole = Total 3 Nos.)
189 SITC of Solderless Crimping Type Aluminium 20.00 5.05 No. 101.00
Lugs (4 Nos. lugs per termination) suitable for
1 x 4.0 Core x 6 Sq.mm. XLPE Aluminium
Armoured cable tail complete erected with
insulating materials for each termination.
(Total 4 Nos. Termination per dist. box) - one
at transf., two at dist. box & one at St. Light
Pole
190 Supplying & erecting 600 mm x 600 mm x 2.00 9292.00 No. 18584.00
3.15 mm thk. Copper earth plate burried in
specifically prepared earth pit 3 mtr. below
ground with 40 Kg. Charcoal and 40 Kg. salt
with alternate layers of charcoal & salt, 38
mm dia Medium Class G. I. Pipe with funnel
with a wire mesh for watering & bricks
massanary block, C. I. cover complete as per
para 7.3 of IS : 3043 with necessary length of
double 8 SWG copper earth wire - bolted to
the plate and covered in 38 mm dia. G. I. pipe
- 2.5 mtr. long complete connected to the
nearest switch gears with end socket as per
direction & duly tested by earth tester
confirming to ISS & as per drawing - (1 Job
per Distribution Box)
PUMPING MACHINARIES.
191 Supply, Installation, testing & commissioning 1.00 7150.80 No. 7150.80
of single phase open well type motor pump
set suitable for 145 LPM discharge @ 25 mtr.
head suitable for 32 mm dia delivery pipe with
control panel and 10 mtr. long 3 x 1.5 Sq. mm
submersible flat copper cable @ SUC
Building . Cat- II
192 Providing & erecting of ISI marked PVC 20.00 55.55 Rmt. 1111.00
insulated 3 core x 1.5 Sq. mm flat flexible
submersible copper cable for the power
supply arrangement to above said open well
mono set pump set. Job including making
termination at panel side.
193 Providing & erecting straight joint in flat 1.00 222.20 No. 222.20
flexible copper cable size upto 10 Sq. mm.
194 Providing & erecting "B" class GI pipe size 32 12.00 176.75 Rmt. 2121.00
mm for the piping connection of pump set
with existing piping connections.
195 Providing & erecting Automatic liquid level 1.00 2525.00 No. 2525.00
controller 6A with wiring connections.
196 POWER CONNECTION CHARGES 1.00 200000.00 Job 200000.00
AUDITORIUM ACOUSTIC SOLUTIONS :

Page 310
197 Wall paneliing wooden Type: Design, supply 249.48 6457.94 Sqmt 1611126.87
and fixing acoustical wall panelling with using
metal wooden frame
work(Vicoustic,Automation & theatre, auralex
(Imported or Manufacture by this options) to
be fixed on wall at every IC-91 which is screw
fixed directly to the wall and fixing CS 55 on
IC91 with help of clip/Screw and where ever
required and using Knauf make insulation
glass wool between framing and panel with
technical specification of 48 Kg/m3 and 50MM
thick on above CS55 fixing aluminium
channel with clip and fixing Acoustic Panel
make size 12mm minimum thick up to 24mm
high as per the following specification : Fiber
acoustic boards with Tongue & Groove
Edge,2mm slot perforation @ 15mm centre,
slates perforations, wood practical core,NRC :
should be Up to 0.80,. The colour as
approved by Architect and as specified
including all accessories, material & labour
complete as directed by Architect / Engineer –
in – charge.(Maker or
Imported:Vicoustic,Automation & theatre,
auralex (Imported or Manufactubeams).The
panel shall b

198 Wall paneliing Micro Fiber: Design, supply 453.60 3726.90 Sqmt 1690521.84
and fixing make 9 MM thick Marco acoustic
wall panelling using make
(Vicoustic,Automation & theatre, auralex
(Imported or Manufacture by this options)
polyester fiber acoustic panel fixed directly by
stamping to the CS55/IC91 which is screw
fixed directly to the wall along the perimeters
(or Penaling) with backing of knauf make
glass wool of 50 MM thick fixed
horizontal/Vertical to the wall used as backing
material as per require fixing macro Acoustic
panel on CS55 with solution like sr and spec
china sr as required As per manufactures
specification. good NRC,FIRE RATED A OR
B The color shade of Panel as approved by
Architect including all accessories, material
,scaffolding & labor complete as directed by
Engineer. (Maker or Imported:
Vicoustic,Automation & theatre, auralex
(Imported or Manufacture by this options)
(MR)
199 Cealing Micro fiber: Design, supply and fixing 1080.80 4130.90 Sqmt 4464676.72
make 9 MM thick Marco acoustic wall
panelling using make (Vicoustic,Automation &
theatre, auralex (Imported or Manufacture by
this options) polyester fiber acoustic panel
fixed directly by stamping to the CS55/IC91
which is screw fixed directly to the wall along
the perimeters (or Penaling) with backing of
knauf make glass wool of 50 MM thick fixed
horizontal/Vertical to the wall used as backing
material as per require fixing macro Acoustic
panel on CS55 with solution like sr and spec
china sr as required As per manufactures
specification. good NRC,FIRE RATED A OR
B The color shade of Panel as approved by
Architect including all accessories, material,
scafolding & labor complete as directed by
Engineer. (Maker or Imported:
Vicoustic,Automation & theatre, auralex
(Imported or Manufacture by this options)

Page 311
200 Design, supply and fixing Door solution 27.72 19725.30 Sqmt 546785.32
required sound proofing: with
(Vicoustic,Automation & theatre, auralex
(Imported or Manufacture by this options)
Knauf make insulation glass wool between
framing and panel with technical specification
of 48 Kg/m3 and 50MM thick and , sound
barrier minimum 3 mm in side of playwood
sheet of 12mm minimum and mdf. (Not
Including accessories) (Maker or Imported:
Vicoustic,Automation & theatre, auralex
(Imported or Manufacture by this options)
(MR)
201 Design, supply and fixing carpet for 912.80 1466.52 Sqmt 1338639.46
auditorium as per following specifications:
Construction : Machine Tufted Cut Pile, Pile
Weight : 2000 GSM , Total Weight:2400
GSM, Pile Height: 7 to 8 mm (+/- 5%), Pile
Fiber Contents : 100% Heatset Nylon (2 Ply
Yarn), Yarn Type : Class – 1 Nylon 6.6 yarn,
Stitch Count : 9.33 S.P.I, Gauge Inches :
1/10 inches, Printing Technique : Chromo Jet
Printing, Primary Backing : Woven
Polypropylene (MR)
202 Carpet solutions wooden : Design, supply and 110.40 3565.30 Sqmt 393609.12
fixing Hdf 8mm 1215*195 mm carpet with
skirting with fixing and including installation
(Flooring UKAutomation & theatre, RGN
Flooring supplyers carpet (Imported or
Manufacture by this options)(Maker or
Imported : Flooring UKAutomation & theatre,
RGN Flooring supplyers carpet (Imported or
Manufacture by this options) (MR)

203 Design, supply and fixing 4mm 370.44 2121.00 Sqmt 785703.24
(0.5+3+0.5)thick. ACP of ALUDECOR or
VIVA MAKE.(ALUMINIUM COMPOSITE
PANEL) of approved shade. The composite
panel should be made of 3mm thick 100%
virgin polyethylene core of LDPE sandwitched
between two skins of 0.5 mm thick aluminium
sheet of which one side is having three layer
of as 0.2 PVDF coating with kyanar 500 paint
to ensure the superior corrosion coated with
epoxy paint grey . the adhesive used
DUBOND for bonding the two skinswhich
can take 8 to 9 kg of weight to seperate fixing
with necessary aluminium or m.s. framing and
hardware , in all existing wall panalling or
aluminium partitions surrounding foyer in
bottom part as per architectural detailed
drawings and specifications and as directed
by E.I.C.(MR)

204 Design, supply and fixing stainless steel 38.00 3918.80 RMT 148914.40
railing made from anticorrosive 316 grade s.s.
pipe of 50mm dia (16 gage) as hand rails.s.
304grade balustar as vartical support fixed in
r.c.c. slab at 1.66 mt c/c including five
horizontal s.s. pipe of 20mm dia(16 gauge)as
equal distance including accessares as per
detail drawing as directed etc complete as
approved by engineer in charge. Approved
make :- kitch or equivalant (MR)

FURNITURE FOR AUDITORIM AND

OFFICE

Page 312
205 Providing and placing Officer Revolving full 5.00 13635.00 NOS 68175.00
back chair of GEEKEN or equivalent
make,seat size 525 x 525 and back height
900 mm from seat using special hi-density U
foam covering with good quality of leather at
seat and back and scientifically curved back
position and wooden good quality handles
with stainless steel supports . Hi-quality
castor fitted Metal powder coated, five prone
made out of deep drawn CRCA sheet stand
and along with good quality of powder coated
steel structure frame of required size and tilt
adjustment by concealed spring with synchro
syatem as design aproved by Engineer-in-
Charge. (MR)

206 Providing and placing Revolving Medium 6.00 11009.00 NOS 66054.00
back chair of GEEKEN or equivalent make,
seat size 525 x 525 and back height 800 mm
from seat using special hi-density U foam
covering with good quality of fabric at seat
and back and scientifically curved back
position and PU type good quality handles .
Hi-quality castor fitted Metal powder coated,
five prone made out of deep drawn CRCA
sheet stand and along with good quality of
powder coated steel structure frame of
required size and only back tilt adjustment by
spring as design aproved by Engineer-in-
Charge. (MR)
207 Providing and placing Revolving Low back 6.00 6262.00 NOS 37572.00
chair of GEEKEN or equivalent make, seat
size 525 x 525 and back height 700 mm from
seat using special hi-density U foam covering
with good quality of velvet at seat and back
and scientifically curved back position and
PU type good quality handles . Hi-quality
castor fitted Metal powder coated, five prone
made out of deep drawn CRCA sheet stand
and along with good quality of powder coated
steel structure frame of required size and
only back tilt adjustment by spring as design
aproved by Engineer-in-Charge.(MR)

STAGE FLOORING FOR AUDITORIUM 0.00

208 Design, supply and fixing hard wood such as 8.84 60600.00 Cmt 535704.00
sal wood scating of various size in base frame
work for two layers. The hard wood shall be of
approved quality (kiln seasoned up to 8 to 9%
moisture content and treated with chemical
treatment) scanting shall be places at require
distance and rigidly fixed in position with
cemented teak wooded gutties and m.s.
screws at 600 mm c/c. in each direction /
member. the frame work shall be
interconnected in approved manner at the
junctions including planning the top and
painting the wood work with two coats of
black japan paint all around etc. complete
with necessary scaffolding the work shall
have to be carried out with all labour and
materials as per drawing and as directed by
E.I.C. (RA)
209 Design, supply and fixing 150x37 mm ( 6"x 1 11.28 94081.50 Cmt 1061239.32
1/2") out of secret T& G.( as per detail given
by consultant). Scientific kiln drying to under 8
to 9% moisture content teak plank ( free from
knot, wrap and bend etc.) as per drawing and
instructions stated belo etc. complete. (RA)

Page 313
 (a) complete lot of indian teak plank shall
have scientific kiln drying upto 8 to 9%
moisture content. Then after plank shall be
1800in length x 150x37mm or 900 in length x
150x37mm plank shall be fixed by screw in
secret groove. Process shall be sent for
moisture check in approved laboratory and
report shall be put on record. plank shall be
fixed in level.
(b) Applying three coats of matt finishing pu
polish on wooden flooring complete with
machine sending and levelling. Appluing hard
putty filling gaps etc. and necessary polishand
shading and again sending by machine and
polish upto required shade and level.

(c) Anti-termite treatment to internal wood

surface of plank by Aldrex or equivalent
complete.
(d) Providing and laying 25mm thick layer of
washed river sand free from dirt, insect in
between wooden frame complete.
210 TEAK-WOOD MOULDING 111.92 551.46 RMT 61719.40
Providing and fixing teakwood moulding
75x50 mm as approved by Architect with
sanding, levelling and 3 coats of melamine
polish complete. (MR)
CURTAIN FOR AUDITORIUM
211 Design and Supply of Main motorised curtain
control system made out of Velvet curtain
cloth Raymonds with horizontal sliding
arrangement complete with fixing railing
track,fixing brackets, runner,master
runner,3mm rope wire,1HPCrompton
Motor,drum with groove cutting,pulleys,2 No
air breaker switch &T,Siemens,GE make) for
reverce & forward, 2 No air micro switch for
auto stop,3 No push button for (Open/
Stop/Close) position the curtain should be
droped to half area,when in closed position
and minimum overlap at the centre should be
900mm and curtain should be stitched in
double gathering.
( Size:14.00 MTx5.30 MT ) (MR) 1.00 126250.00 NOS 126250.00
212 Design and Supply of Middle curtain Control
system made out of MOSSHY curtain cloth
with horizontal sliding arrangement complete
with fixing railing track,fixing
brackets,runner,master runner,3mm rope
wire,1HP Crompton Motor,drum with groove
cutting,pulleys,2 No air bracker switch
(L&T,Siemens,GE make) for reverce &
forward,2 No air micro switch for auto stop,3
No push button for Open/Stop/Close position
the curtain should be droped to half
area,when in closed position and minimum
overlap at the centre should be 900mm and
curtain should be stitched in one & half
gathering.
( Size:14.00 MTx5.30 MT ) (MR) 1.00 113120.00 NOS 113120.00

Page 314
213 Design and Supply of back curtain made out
of glazed cotton cloth with horizontal sliding
arrangement complete with fixing railing track,
fixing bracket ,runner,master runner,3mm
rope wire,1HP Crompton Motor ,drum with
groove cutting,pulleys,2 No air bracker switch
(L&T,Siemens,GE make) for reverce &
forward,02 No.air micro switch for auto stop 3
No push button for Open/Stop/Close QTY
stop,position the curtain should be droped to
half area,when in closed position and
minimum overlap at the centre should be
900mm and curtain should be stitched in one
& half gathering
( Size:14.00 MTx5.30 MT ) (MR) 1.00 103020.00 NOS 103020.00
214 Design, supply and fixing good quality velvet 64.00 1414.00 Sqmt 90496.00
clothing(price of cloth minimum 650 rs/sqmt)
curtain with 220 cm height including 25MM
dia alluminium powder coated coloured
decorative curtain road with florid sinial of
required size curtain shall stitch in three fold
system as directed by Engineer-in-Charge.
(MR)
215 Design and Supply of roman blinds with fabric 64.00 1212.00 Sqmt 77568.00
of blackout category of standard suggested
company as vista including fixing as per
instructions of EIC. (MR)

216 Design and Supply of Stage Wing panel 6.00 22725.00 NOS 136350.00
made out from 25mm x 50mm of 16swg MS
pipe duly painted in black colour with black
glazed casement cloth both side having
manual moving facility complete .(Size:-
20'x5') (MR)
217 Manager’s Table/Officer’s Table 1.00 39390.00 RMT 39390.00
Design, supply and fixing in position
Manager’s Table of size 7'0"x 2'-6"/Officer’s
Table of size 4’-6” x 2’-3” including Side
Storage (Credenza) by using 25mm thick
plywood for top and 18 mm thick plywood for
all other horizontal and vertical members.
Telescopic CPU Stand/ ready made
Keyboard tray shall be provided of approved
model and make. Footrest made with T.W.
member of size 4”x 1 ½“ finished with french
polish.

Side Storage (Credenza) as per drawing shall

be provided. Facia of Side Storage
(Credenza) shall be finished with 1mm thick
laminates as shown in the drawing and all
other sides shall be finished with white
enamel paint. The Side Storage (Credenza)
shall be provided with handles (Stainless
Steel finish) and channels as per approval of
the Project Consultant / Bank.

All exposed plywood surfaces to be finished

with 1 mm thk. laminate of approved make &
shade, and all exposed edges of table top &
ply verticals to have 1" x 1/4" T.W. lipping. All
exposed T.W. sections to be melamined and
internal surfaces to have white enamel paint
as directed. Item to include plywood ( Mayur,
Green or equivalent ply boxing, all necessary
hardware and fittings in Stainless Steel 304
finish, lipping to all edges etc. complete in all

Page 315
218 Staff Table 1.00 18685.00 RMT 18685.00
Design, supply and fixing in position Staff
Table of size 5' 0"x 2'0" by using 25 mm thick
plywood for top and 18 mm thick plywood for
all other horizontal and vertical members.
Telescopic CPU Stand/ ready made
Keyboard tray shall be provided.

Drawer units as per drawing shall be provided

with multipurpose Godrej locks in each
drawer. Facia of drawer unit shall be finished
with 1mm thick laminate and all other sides
shall be finished with white enamel paint. The
drawers will be provided with handles
(Stainless Steel finish) and channels as per
approval of the Project Consultant / Bank.

All exposed plywood surfaces to be finished

with 1mm thk. laminate of approved make &
shade, and all exposed edges of table top &
ply verticals to have 1" x 1/4" T.W. lipping. All
exposed T.W. sections to be melamined and
internal surfaces to have white enamel paint
as directed. The item to include plywood
boxing, all necessary hardware and fittings in
Stainless Steel finish, lipping to all edges etc.
complete in all respects. (MR)

219 Sofa 54.60 13736.00 RMT 749985.60

Design, supply and fixing sofa made from
special quality teak wood framing covered
with 19 mm thick ply with 1.0 mm thick
laminate on two sides and front and back
exposed edges to be finished with wooden
frame and with malamine polish. 100 mm
thick geo foam 12 mm thick 'U' foam with 19
mm thick ply with good quality of fabric in
seat. 75mm thick geo foam, 12mm thick 'U'
foam and 19 mm thick ply with good quality of
fabric.basic rate of fabric rs.650/- mt.
complete as per drawing and design (MR)

220 Corner tipoy 22.00 9595.00 NOS 211090.00

Design, supply and fixing corner table made
from 50 x 40 mm S.B. wooden frame and leg
with malamine polish. Top to be made from
12 mm thick float glass top. Complete with all
necessary hardware. (MR)

AUDITORIUM AV SOLUTION
REQUIREMENT:
221 Design, supply, Testing and Commissioning 1.00 611050.00 NOS 611050.00
of Technology Native resolution WXGA
resolution & minimum 5000 ANSI Lumens,
Lamp Life 5000 hours in eco mod UXGA DLP
with minimum 100000:1 contrast, Approved
Make : Christie / Optoma /Sony / Digital
Projection (MR)
222 Design, supply,Testing and Commissioning of 1.00 277750.00 NOS 277750.00
Motorized Screen Diagonal 220" 16 x 9
Approved Make :Liberty/Suvira/Swastik
Screen (MR)
223 Design, supply, Testing and Commissioning 1.00 7777.00 NOS 7777.00
of Projector cealing Mount kit Approved
Make :-Impression/ Super System/ any other
compairable (MR)

Page 316
224 Design, supply, Testing and Commissioning 4.00 152431.50 NOS 609726.00
of Main FOH loudspeaker which shall be a
multi driver, full-range loudspeaker system:
The loudspeaker free space sensitivity shall
be at least 92 dB-SPL in the 50Hz to 16kHz
range with both measurements referenced to
a 1 Watt (2.83V) pink noise input measured at
1 meter. The nominal horizontal beamwidth
shall be 100 degrees or better, and the
nominal vertical beamwidth shall be 70
degrees or more. The power handling
capacity of the loudspeaker shall be at least
240 Watts continuous pink noise, band-
limited from 50Hz to 16kHz. Max continuous
SPL shall be 117dB (123dB Peak) or better
with a nominal impedance of 8 Ohms or
higher. The Loudspeaker shall be rated IP55
or better for weather rated applications.
Manufacture Authorized certification Require
for projects. Approved make: Bose/Martin
Audio/EAW/Renkus Heinz (MR)
225 Design, supply, Testing and Commissioning 4.00 152431.50 NOS 609726.00
of Main FOH loudspeaker which shall be a
multi driver, full-range loudspeaker system:
The loudspeaker free space sensitivity shall
be at least 92 dB-SPL in the 50Hz to 16kHz
range with both measurements referenced to
a 1 Watt (2.83V) pink noise input measured at
1 meter. The nominal horizontal beamwidth
shall be 100 degrees or better, and the
nominal vertical beamwidth shall be 70
degrees or more. The power handling
capacity of the loudspeaker shall be at least
240 Watts continuous pink noise, band-
limited from 50Hz to 16kHz. Max continuous
SPL shall be 117dB (123dB Peak) or better
with a nominal impedance of 8 Ohms or
higher. The Loudspeaker shall be rated IP55
or better for weather rated applications
Manufacture Authorized certification Require
for projects. Approved make: Bose/Martin
Audio/EAW/Renkus Heinz (MR)

226 Design, supply, Testing and Commissioning 2.00 152431.50 NOS 304863.00
of Main FOH loudspeaker which shall be a
multi driver, full-range loudspeaker system:
The loudspeaker free space sensitivity shall
be at least 92 dB-SPL in the 50Hz to 16kHz
range with both measurements referenced to
a 1 Watt (2.83V) pink noise input measured at
1 meter. The nominal horizontal beamwidth
shall be 100 degrees or better, and the
nominal vertical beamwidth shall be 70
degrees or more. The power handling
capacity of the loudspeaker shall be at least
240 Watts continuous pink noise, band-
limited from 50Hz to 16kHz. Max continuous
SPL shall be 117dB (123dB Peak) or better
with a nominal impedance of 8 Ohms or
higher. The Loudspeaker shall be rated IP55
or better for weather rated applications.
Manufacture Authorized certification Require
for projects. Approved make: Bose/Martin
Audio/EAW/Renkus Heinz (MR)

Page 317
227 Design, supply, Testing and Commissioning 2.00 152431.50 NOS 304863.00
of Main FOH loudspeaker which shall be a
multi driver, full-range loudspeaker system:
The loudspeaker free space sensitivity shall
be at least 92 dB-SPL in the 50Hz to 16kHz
range with both measurements referenced to
a 1 Watt (2.83V) pink noise input measured at
1 meter. The nominal horizontal beamwidth
shall be 100 degrees or better, and the
nominal vertical beamwidth shall be 70
degrees or more. The power handling
capacity of the loudspeaker shall be at least
240 Watts continuous pink noise, band-
limited from 50Hz to 16kHz. Max continuous
SPL shall be 117dB (123dB Peak) or better
with a nominal impedance of 8 Ohms or
higher. The Loudspeaker shall be rated IP55
or better for weather rated applications.
Manufacture Authorized certification Require.
Approved make: Bose/Martin Audio/ (MR)

228 Design, supply, installation, testing & 3.00 513451.37 NOS 1540354.11
Commissioning of Modular Dual 12" (4" Voice
Coil) Installation friendly subwoofer with a
free field Freq. Range of 36 Hz - 250Hz or
better. It should be possible to use the
subwoofer in Discrete or Parallel mode. It
should have an axial Sensitivity of > = 94dB
(1W/1m) or more delivering a Max.
Calculated SPL(Continuous) of >=123 dB
(129dB Peak).The loudspeaker should have a
nominal impedance of 4ohm or 2x8 ohms and
continuous Power Handling of 400+400W
(1600+1600W Peak) or more. at least 16
suspension / rigging points shall be available
for flexible installs. The Subwoofer shall be
enclosed in Baltic birch plywood with
Polyurethane coating and powder coated
steel grille. Manufacture Authorized
certification Require for projects. Approved
make: Bose/Martin Audio/EAW/Renkus Heinz
(MR)

229 Design, Supply, Testing and Commission, 4.00 84303.52 NOS 337214.08
rame for enclosures to hang speakers. (MR)

230 Design, supply , installation , testing and 4.00 80226.30 NOS 320905.20
commissioning of 2 way IP55 rated
Indoor/Outdoor Surface mount Music
Loudspeaker: 5.25" LF and 2x2.25"
articulated array for Mid/High frequencies.
Free field Frequency range (-10dB) of 60Hz
to 18kHz; Power handling of 400 Watt peak;
Nominal dispersion of 180x75; Free field
Sensitivity of 86dB SPL and Max SPL of 111
dB SPL (peak); Nominal Impedance 8 Ohms;
Integral multi-tap Transformer with tap
settings of 12.5/25/50/100 W @ 100V. with
Powder-coated steel grille; Shall include
necessary standard hardware for Surface
install.Manufacture Authorized certification
Require for projects. Approved make:
Bose/Martin Audio/EAW/Renkus Heinz (MR)

Page 318
231 Design, supply, installation, testing & 4.00 141199.20 NOS 564796.80
Commissioning of Floor Monitors with 6 X
2.25" Mid-high drivers and 2 X 5.25" woofer
gives articulated array configuration 120 X 60
degrees coverage; Frequency response of
70Hz-16kHz; Sensitivity 90 dB SPL; Max SPL
113 dB SPL; power handling of 200W @ 8
Ohm, Internal passive crossover network
does not require active equalization; Rear
bumper prevents unwanted movement;
drivers enclosed in Moulded textured
polyethylene material with powder coated
steel grille.Manufacture Authorized
certification Require for projects. Approved
make: Bose/Martin Audio/EAW/Renkus Heinz
(MR)
232 Design, supply, installation, testing & 3.00 677056.92 NOS 2031170.76
Comissioning of 8 channel class D Power
amplifier with a Max Output Power of
8x500W@4/8 ohms, or bridged mode output
power of 4 x 1000W @ 8 ohms/70/100V.
20Hz - 20 KHz, SNR of 101dB and THD + N
of <0.4% with built in protection such as
Limiters, Temperature, DC, Short Circuit,
Peak Current Limiters, Turn on delay etc.
Built in DSP for Matrix routing, Speaker
equalization, Delays, Array EQs etc with
Ethernet Port for Network Control,
programming and monitoring. The Damping
factor shall be >5000. The amplifier shall
implement Dual Voltage and Current
feedback technology to provide power as per
the load demand. Shall offer optional Network
audio connectivity (Dante or CobraNet)
through expansion slot. Warranted for at least
5 years. Manufacture Authorized certification
Require for projects. Approved make:
Bose/Lab Gruppen/Ashly
Audio/PowerSoft/MC2 Audio (MR)
233 Design, supply, Testing and Commissioning,2 2.00 44440.00 NOS 88880.00
way bass reflex,Equipment
25 mm tweeter 170 mm woofer-
midrange,Power Handling
(RMS/Max.)120/180 Watts
Frequency Response-
30 – 50000 Hz,Sensitivity (2.8V/1m) -91 Db
Approved make: Magnat/Heco (MR)

234 Design, supply , installation , testing and 1.00 417179.82 NOS 417179.82
comissioning of Digital Sound Processor with
8 Mic/Line inputs & 8 analog outputs, 8
Additonal digital Outputs; 24 Bit A-D and D-A
Convertors; Sampling Rate : 48 kHz; THD : <
0.002 % ; Channel Separation (Crosstalk) : <
105 dB ; Frequency Response 20 Hz - 20 kHz
; Signal-to-Noise Ratio 80 dB ;Dynamic
Range : > 115 dB; 5 Control Inputs and
Outputs; RS-232 and Ethernet Port for third
party Control and Monitoring; Expansion slots
for optional Network Audio formats like
Dante/Cobranet; inbuilt DSP features like
Input Equalizers, Router, Band Pass filter,
Output Equalizer, Delay, Limiters, gates ,
Source selectors etc. Shall Support at least
15 remote Zone controllers.Manufacture
Authorized certification Require for projects.
Approved make: Bose/Biamp/Symetrix/Ashly
Audio (MR)

Page 319
235 Design, supply, installation, testing & 1.00 247430.84 NOS 247430.84
Commissioning of Sound Reinforcement
System - Networked and programmable
controller; Power supply requirement of 15-24
VDC, 300mA; Four rotatory encoders with
circular LED rings for managing gain setting
or scene selection; Fifth encoder provides
control over programmed scenes or presets;
Two line by 40 character blacklit LCD
provides names of the system elements they
are controlling.Manufacture Authorized
certification Require for projects. Approved
make: Bose/Biamp/Symetrix/Ashly Audio
(MR)
236 Design, supply, Testing and Commissioning 2.00 53328.00 NOS 106656.00
of Handheld Wireless System, Power and
Battery Status LED, Adjustable Gain Control,
2AA Batteries provide up to 14hrs of
continous use, 300ft operating range (line of
sight). Up to 12 compatible systems per
frequency band (region dependent),
Microprocessor-controlled internal antenna
diversity, One-touch QuickScan frequency
selection quickly locates the best frequency,
1/4" and XLR audio outputs, Two color audio
status indicator LED. Handheld Microphone
with Transmitter, Wireless Receiver, Break-
resistant Microphone Clip, 2 AA Batteries,
Vocal 60Hz - 15Khz. Handheld Wireless
System Approved make :-Shure/TOA/ Audix
(MR)
237 Design, supply, Testing and Commissioning 2.00 53328.00 NOS 106656.00
of Rack Mount Wireless Tie-Pin Microphone
:Up to 12 compatible systems per frequency
band (region dependent), Microprocessor-
controlled internal antenna diversity, One-
touch QuickScan frequency selection quickly
locates the best frequency, 1/4" and XLR
audio outputs, Two color audio status
indicator LED. Power and Battery Status LED,
Adjustable Gain Control, 2AA Batteries
provide up to 14hrs of continous use, 300ft
operating range (line of sight). Lavalier
Microphone Bodypack Transmitter, Tie Clip
and Windscreen, Vocal Presenter 60Hz -
12Khz.Rack Mount Wireless Tie-Pin
Microphone Approved make :-Shure/TOA/
Audix (MR)

238 Design, supply, Testing and Commissioning 6.00 26552.90 NOS 159317.40
of Boundary Microphone: Flat frequency
response across the vocal range for
uncolored sound, Interchangeable cardioid,
supercardioid, and omnidirectional cartridges
that provide optimal choice for each
application, Sleek, low-profile design for
unobtrusive appearance Balanced,
transformerless output for increased immunity
to noise over long cable runs, Programmable
membrane on/off switch plus LED on/off
indicator, impedance EIA Rated at 150 ohms
(180 ohms Actual), Output Level -6dbv (
0.5v), 11 tp 52 Vdc phantom, 2.0 ma current
Consumption.Boundary Microphone
Approved make :-Shure/TOA/ Audix (MR)

Page 320
239 Design, supply, Testing and Commissioning 6.00 23331.00 NOS 139986.00
of Overhead Microphone: Wide dynamic
range and frequency response for accurate
sound reproduction across the audio
spectrum, Interchangeable cartridges that
provide an optimal polar pattern choice for
each application Balanced, transformerless
output for increased immunity to noise over
long cable runs, Supplied stand-mount
adapter for portable applications (in-line
preamplifier versions only), Off-white or black
finish that blends unobtrusively with most
surroundings, Preamp options available offer
easy installation in ceilings or microphone
stands, When combined with the high
sensitivity cartridge's wide frequency
response, these microphones provide
accurate sound reproduction with minimum
RF interference or electromagnetic hum,
Frequency Responce 50 to 17000Hz,
Impedance 180 ohms actual.Overhead
Microphone Approved make :-Shure/TOA/
Audix (MR)

240 Design, supply, Testing and Commissioning 2.00 12887.60 NOS 25775.20
Frequency response tailored for vocals, with
brightened midrange and bass rolloff, Uniform
cardioid pickup pattern isolates the main
sound source and minimizes background
noise, Pneumatic shock-mount system cuts
down handling noise
Effective, built-in spherical wind and pop filter,
Supplied with break-resistant stand adapter
which rotates 180 degrees, Legendary Shure
quality, ruggedness and reliability, Cardioid
(unidirectional) dynamic, Frequency
response: 50 to 15,000 Hz, Optput imedance
200 ohms, weight 298 g. Vocal Microphone
Approved make :-Shure/TOA/ Audix (MR)

241 Design, supply, Testing and Commissioning 2.00 11776.60 NOS 23553.20
of Vocal Microphone: Contoured frequency
response for clean, instrumental reproduction
and rich vocal pickup, Professional-quality
reproduction for drum, percussion, and
instrument amplifier miking, Uniform cardioid
pickup pattern isolates the main sound source
while reducing background noise, Pneumatic
shock-mount system cuts down handling
noise, Extremely durable under the heaviest
use, Frequency response: 40 to 15,000 Hz,
Output impedance 310 ohms, output level -
54.5dbv/pa, weight 284 g.Instrument
Microphone Approved make :-Shure/TOA/
Audix (MR)

242 Design, supply, Testing and Commissioning 6.00 2333.10 NOS 13998.60
Multi-Purpuse Micophone, Excellent sound
quality. Ideal for spoken word, karaoke,
multimedia, and instrument use, Frequency
Response 50-15000 hz, impedance 600
ohms, output level -52dbv.Multipurpuse
Microphone Approved make :-Shure/TOA/
Audix (MR)

Page 321
243 Design, supply, Testing and Commissioning 2 29885.90 NOS 59771.80
Gooseneck Microphone, Wide dynamic range
and frequency response for accurate sound
reproduction across the audio spectrum,
Interchangeable cartridges provide the right
polar pattern for every application, Balanced,
transformerless output for increased immunity
to electromagnetic hum and RF interference
over long cable runs, Shock mount provides
over 20 dB isolation from surface vibration
noise, Locking flange mount for permanently
securing microphone to lecterns, pulpits, or
conference tables, Snap-fit foam windscreen,
Programmable on/off switch and LED on/off
indicator, New brighter LED improves visibility
under strong ambient lighting, Logic input and
output terminals for remote control or use with
automatic microphone mixers, Frequency
Responce 50 to 17000Hz.Output Impedance
180 ohms Actual.Gooseneck Microphone
Approved make :-Shure/TOA/ Audix (MR)

244 Design, supply, Testing and Commissioning 6.00 10887.80 NOS 65326.80
For conect all the Systems audio
connector.Audio Processor Approved make :-
Shure/TOA/ Audix (MR)
245 Design, supply, Testing and Commissioning 4.00 2333.10 NOS 9332.40
floor stand suppot for Microphone Approved
make :-Shure/TOA/ Audix (MR)

246 Design, supply, Testing and Commissioning 4.00 2110.90 NOS 8443.60
table suppot for Microphone Approved make :-
Shure/TOA/ Audix (MR)
247 Design, supply, Testing and Commissioning 1.00 122210.00 NOS 122210.00
Versatile, powerful 2x2 audio processor
featuring renowned feedback reduction
combined with software-configurable
processing, DFR Automatic Feedback
Reduction
Parametric and Graphic Equalizers, Cut/Shelf
Equalizer, Compressors/Limiters, Automatic
Gain Control, Gate/Downward Expander,
Ducker, 2-Way Crossover, Subwoofer
Processor, Splitter,Delay Processors,2x2
Matrix Mixer Approved make :-Shure/TOA/
Audix (MR)

Page 322
248 Design, supply, Testing and Commissioning 1.00 211090.00 NOS 211090.00
of 32 Channel Audio Mixer :Dual function, LR,
M, 8 group, 10 aux, 12×4 matrix console.
Frame sizes range from 24 to 48 channels
including 2 stereo channels, Proper dual
functionality for FoH/Monitor mixing,
Recording capable with channel direct
outputs, Responsive 4 band, 2 sweep EQ,
100Hz channel high pass filters, Individual
phantom power and polarity switching,
100mm dust protected faders, 1kHz oscillator
/ pink noise generator with patchable external
output, 2-track monitoring and replay to LR, 3
headphones/earpiece sockets and local
monitor outputs, Electronically balanced XLR
outputs with +26dBu drive capability, Preamp
74dB range with +34dBu input capability for
mic or line, Ultra low noise mix head amp
design, Uses RPS11 high performance
external linear power supply
Built-in combiner for redundant backup
supply, Individual circuit card assembly with
nutted pots, Sys-Link V2 console input/output
linking option.32 Channle Audio Mixer
Approved make :- Allen & Health/Mackie
Pro/Peavey Approved make :- Allen &
Health/Mackie Pro/Peavey (MR)

250 Design, supply, Installation, Testing and 200.00 166.65 RMT 33330.00
Commissioning of Speaker Cable OFC 2
Core 1.5 SQMM Approved make :-
Goobay/Clicktronics/Liberty/HOC (MR)
251 Design, supply, Installation, Testing and 1.00 48884.00 NOS 48884.00
Commissioning of 24 port giga switch
Approved make :- D-Link/Netgear/Cisco (MR)

252 Design, Supply, Installation, Testing and 2.00 26664.00 NOS 53328.00
Commissioning Microphone patch penal
Approved make :- Netrux/Any of stabdard
Brands (MR)
253 Design, Supply, Installation, Testing and 6.00 9999.00 NOS 59994.00
Commissioning Mounting brackets of speaker
Approved make :- Any of Standard Brands
(MR)
254 Design, Supply, Installation, Testing and 2.00 44440.00 NOS 88880.00
Commissioning Motorized Chain Pulley
Approved make :- Any of Standard Brands
(MR)
255 Design, Supply, Installation, Testing and 2.00 24442.00 NOS 48884.00
Commissioning of wifi dual band router
with 3 Antennas,
Ethernet Cable, Power Adapter, Approved
make :- Dlink/Cisco/Netgear (MR)
256 Design, Supply, Installation, Testing and 6.00 4545.00 RMT 27270.00
Commissioning of VGA 10M CABLE
Approved make :- Kramer/Belden/Any of
Standard Brands (MR)
257 Design, Supply, Installation, Testing and 10.00 303.00 NOS 3030.00
Commissioning of VGA Patch Code
Approved make :- Kramer/Belden/Any of
Standard Brands (MR)
258 Design, Supply, Installation, Testing and 200.00 202.00 RMT 40400.00
Commissioning of Speaker Cable OFC 2
Core 4 SQMM Approved make :-
Liberty/Goobay/Lotus (MR)
259 Design, Supply, Installation, Testing and 200.00 151.50 RMT 30300.00
Commissioning of Speaker Cable OFC 2
Core 2.5 SQMM Approved make :-
Liberty/Goobay/Lotus (MR)

Page 323
260 Design, Supply, Installation, Testing and 4.00 14645.00 RMT 58580.00
Commissioning of HDMI Cable Standart 15 M
4k Approved make :-
Goobay/Clicktronics/Liberty/HOC (MR)
261 Design, Supply, Installation, Testing and 3.00 4444.00 RMT 13332.00
Commissioning of HDMI Cable Standart 5 M
4k Approved make :-
Goobay/Clicktronics/Liberty/HOC (MR)
262 Design, Supply, Installation, Testing and 12.00 1919.00 RMT 23028.00
Commissioning of HDMI Cable Standart 1.5
M 4k Approved make :-
Goobay/Clicktronics/Liberty/HOC (MR)
263 Design, Supply, Installation, Testing and 10.00 2121.00 RMT 21210.00
Commissioning of RCA Standard Cable
Approved make :-
Goobay/Clicktronics/Liberty/Amazone/ Any
other Compaired (MR)
264 Design, Supply, Installation, Testing and 3.00 9595.00 RMT 28785.00
Commissioning of HDMI Cable Standart 10 M
4k Approved make :-
Goobay/Clicktronics/Liberty/Amazone (MR)

265 Design, Supply, Installation, Testing and 20.00 8080.00 RMT 161600.00
Commissioning of Microphone Cable
Approved make :- Kramer/Extron/Any of
Standard Brands (MR)
266 Design, Supply, Installation, Testing and 3.00 21210.00 NOS 63630.00
Commissioning of HDMI Extender Set
Approved make :- Any of Standard Brands
(MR)
267 Design, Supply, Installation, Testing and 3.00 15150.00 NOS 45450.00
Commissioning of 1x4 HDMI Splitter
Approved make :- Kramer/Extron/Any of
Standard Brands (MR)
268 Design, Supply, Installation, Testing and 4.00 1212.00 RMT 4848.00
Commissioning of HDMI Patch Cord 1Mtr
Approved make :- Any of Standard Brands
(MR)
269 Design, Supply, Installation, Testing and 2.00 111100.00 NOS 222200.00
Commissioning of 4x2 HDMI Switcher with Tx-
Rx Approved make Kramer/Extron/Any of
Standard Brands :- (MR)
270 Design, Supply, Installation, Testing and 5.00 11110.00 NOS 55550.00
Commissioning of Popoup Box Approved
make :- Kramer/Extron/Any of Standard
Brands (MR)
271 Design, Supply, Installation, Testing and 2.00 45450.00 NOS 90900.00
Commissioning of AV Rack for Equipment ,
22u
6A 10 Socket,2 nos. Cooling Fan, Frount 4
mm thick Toughened Glass Door Approved
make :- Alphine/Wellrack/President (MR)
272 Design, Supply, Installation, Testing and 4.00 14140.00 NOS 56560.00
Commissioning of Cannectors & Accessories
kind of av connectors Accessories,XLR
Male,XLR Female etc… Approved make :-
Kramer/Extron/Any of Standard Brands (MR)

273 Installation charges single time (MR) 1.00 555500.00 FULL 555500.00
JOB
274 Stabilizer 20kva Approved make :- 2.00 44440.00 NOS 88880.00
Luminous/APC/Any of Standard Brands (MR)

STAGE LIGHTING SOLUTIONS :

275 Design, Supply, Installation, Testing and 28.00 10146.86 NOS 284112.08
Commissioning of LED RGB Par Light with
input voltage ac 100, 2C18:C2140, 50/60Hz
Power 150W or Better, Led source 54 x 3w,
beam angle: 25* or more approved make:
LBT / DL & MC / Canara / Saif (MR)

Page 324
276 Design, Supply, Installation, Testing and 6.00 2741.14 NOS 16446.84
Commissioning of Halogen spot light with
power 1000W Capacity Aluminium alloy
protection, Lamp holder in Ceramic and silver
plarted contacts. Approved Make: LBT / DL &
MC / Canara / Saif (MR)
277 Design, Supply, Installation, Testing, and 2.00 148021.56 PAIR 296043.12
Commissioning of Moving Head light with
300v Beam, 0-100% linear adjustment, linear
adjustment focus, Adjustable Wash effects
angle, 250000LM/10meter, 3-layer optic glass
lens, 8 Prism rotation ZOOM. Approved Make
: LBT / DL & MC / Canara / Saif (MR)

278 Design, Supply, Installation, Testing and 4.00 23847.92 NOS 95391.68
Commissioning of Profile Light with voltage
220-240v. Power 1000WCelling Hanging
Arrangment. Approved make: LBT / DL & MC
/ Canara / Saif (MR)
279 Design, Supply, Installation, Testing and 2.00 15076.27 NOS 30152.54
Commissioning of Smoke Unit having
following specification Voltage: AC220V,
Frequency 50 Hz, Power Consumption
1500W, output 8200 Cubic Feet per min,
Warming time 8 minutes (MR)
280 Design, Supply, Installation, Testing and 4.00 4865.52 NOS 19462.08
Commissioning of Seal Beem Par Light
1000W having following specification voltage
AC 2ooV Frequency 50Hz Power
consumption 1000W, Lamp 1000W
Cylindrical (MR)
281 Design, Supply, Installation, Testing and 4.00 5208.17 NOS 20832.68
Commissioning of Strobe Light 1500W
Having Following specification Voltage AC
220V, Frequency 50 Hz Power Consumption
500W, Lamp 220V/750W, Adjustment: Speed
& Light Via feeder (MR)
282 Design, Supply, Installation, Testing and 2.00 10279.28 NOS 20558.56
Commissioning of Laser Light Having
Following Specification Voltage: AC220V,
Frequency 50Hz, Power Consumption 400W,
Lamp 220v/400W, Body: Aluminium
Extraded, Laser Power 80mm W, Mixed
Yellow, Control: sound Activated, Auto
Random Patterns (MR)
283 Design, Supply, Installation, Testing and 4.00 37690.68 NOS 150762.72
Commissioning of 12 Channles 12 Pack
2KW, DMX Control insolated DMX 512 input
for halogen light, Approved Make: LBT / DL &
MC / SAIF / PE (MR)
284 Design, Supply, Installation, Testing and 1.00 89087.05 NOS 89087.05
Commissioning of universal 192 DMX
controller with moving head fixtures,
scanners, color changers, dimmers. DMX
lighting Controller & Splitter. Approved Make:
LBT / CANARA / DL & MC / Saif. (MR)

285 Design, Supply, Installation, Testing and 2.00 47969.95 NOS 95939.90
Commissioning of Lightning Bar With
redoxaid and dark black paint for hanging
Lights Approved Make: Custom (MR)
286 Design, Supply, Installation, Testing and 1500.00 127.77 RMT 191655.00
Commissioning of 2.5 Sq mm 3Core PVC
insulated multicore, Wattage Capacity upto
1100V, Power Cable. Approved Make:
Polycab / Finolex / Chetan / R. R. Kabel (MR)

287 Design, Supply, Installation, Testing and 400.00 79.49 RMT 31796.00
Commissioning of microphone cable with
rubber insulation, tinned copper, Approved
make: Krystal / Draka / Belden (MR)

Page 325
288 Design, Supply, Installation, Testing, and 1.00 34127.19 NOS 34127.19
Commissioning of servo stabilizer with rating
10KVA, Output Voltage 230V, +-1%, Voltage
Stabilizer. Approved Make: Simon / Akshar /
ADK (MR)
289 Design, Supply, Installation, Testing, and 1.00 34264.25 NOS 34264.25
Commissioning of equipment rack - 27U,
Approved Make : Rittal / ACE / Elixir (MR)
290 Design, Supply, Installation, Testing, and 52.00 1027.93 NOS 53452.36
Commissioning of Brackets for lights.
Approved Make : Custom (MR)
291 Design, Supply, Installation, Testing, and 1.00 44137.00 SET 44137.00
Commissioning of Connectors. Approved
Make : Neutrik / Amphenol / Yonghsheng
(MR)
292 Design, Supply, Installation, Testing, and 1.00 181800.00 FULL 181800.00
Commissioning of patch code, Accessories, JOB
Training, Programing, and Calibration of
above stage lighting system (MR)

293 Design, Supply, Installation, Testing, and 30.00 3232.00 NOS 96960.00
Commissioning of ABC Type Fire
Extinguisher covers A, B, C class of fires
which includes papers, wood, cloth, rubber,
plastic and inflammable liquid like oil, petrol,
paints, petrochemical product, resins, gases
in the compressed form like Oxygen,
Acetylenes, LPG and CNG, electrical and
sophisticated electrical equipment as per the
fire IS code and specifications and as directed
by E.I.C.(MR)
294 Design, Supply, Installation, Testing, and 1.00 303000.00 FULL 303000.00
Commissioning of 2MP 20 CCTV Cameras JOB
with Night Vision and 8 Channel DVR x 3 nos
Standalone Kit Including 8CH Turbo HD Mini
DVR 3Pcs, 2MP Dome Cameras 4Pcs , 2MP
Bullet Cameras 16 Pcs , 2000 Mtr Copper
Cable with PVC pipe and fixing, 8CH x 3
Power Supply BNC 40 Pcs , DC 20 Pcs. ,
DVR Description: H.264 H.264+ And Dual-
stream video compression x 3 Nos, Support
HD-TVI AHD and Analogue cameras with
adaptive access. Up to 3MP resolution for
recording of the first 2 channels , 32” Monitor
FullHD x 3 nos, Hard Disk 2 TB. X 3 nos as
directed by E.I.C.(MR) Make :- C-plus or
Hick vision
295 Design, Supply, Installation, Testing, and 305.00 80.80 RMT 24644.00
Commissioning of D-Link Cat 6 Networking
Cable Including PVC pipe and all necessary
fixture and fittings completed as directed by
E.I.C.(MR) Make :- D-Link
296 Design, Supply, Installation, Testing, and 30.00 606.00 NOS 18180.00
Commissioning of Havells or Philips Crabtree
Athena 4M LED Footlight for Garden including
Color: White , Compliance to stringent quality
norms, dual shutter mechanism for easy and
better fitment, Wide and flat switch knob for
easy operation, FR grade polycarbonate with
high impact resistance, shock proof and UV
rays stabilized, Retrofit solution for 6 module,
High lumen output with low power
consumption leds for long life, Cool day light
leds's, Customer support number contact_us
on : [ 18001031313 ], Warranty: 1 year on
product, Product Dimensions: 9.2 x 2.5 x 15.5
cm as directed by E.I.C.(MR)

Page 326
297 Design, Supply, Installation, Testing, and 150.00 707.00 NOS 106050.00
Commissioning of Havells or Philips 18-Watt
LED Surface Ceiling Light (White, Round) for
Parking area at 6 to 7 mtr Height as directed
by E.I.C.(MR)
298 Design, Supply, Installation, Testing, and 63.00 1616.00 ROW 101808.00
Commissioning of 12V LED Aluminium
Theater Step Lights ( 4 Nos LED in a row )
With Down throw and row number optional,
Including of Install Style Embedded Fixture,
Colour Black, Body Material Aluminium,
Lighting Color RGB, Voltage 12V Including
fixing and all completed as directed by
E.I.C.(MR) Make :- Havells or Philips
299 Design, Supply, Installation, Testing, and 60.00 2525.00 NOS 151500.00
Commissioning of LED Cool White Pin And
Beam Spot Light for auditorium hall including
of voltage 220 -380 v, Frequency 50-60 Hz,
Beam light type as directed by E.I.C.(MR)
Make :- Havells or Philips
300 Design, Supply, Installation, Testing, and 100.00 1515.00 NOS 151500.00
Commissioning of LED Cool White
Auditorium Lights, IP Rating: IP 65 for
auditorium hall including of Color Temprature
3500-4100 k as directed by E.I.C.(MR) Make :-
Havells or Philips
AIR CONDITIONING
301 Design, Supply Installation Testing &
Commissioning for following items
1.0 AHU
Supply of ZECO / CITIZEN / ETHOS /
CHAUHAN make AHU of Double Skinned
type with 43 mm thick injected spray type
sandwitch PUF Panels in 22 G GI duly
powder coated construction with thermal
break profile aluminium sections. The AHU
shall be comprising of "NICOTRA / KRUGER
" make imported Blower, high efficiency TEFC
Electric Motor, Drive Package, 4/6 Row D-X
Cooling Coil in Multiple Sections, Exapnsion
valves, 50 mm thick wahsable HDPE media
10 micron Pre filetrs, 5 Micron Micro Vee
filters, Satinless Steel 304 insulated Drain
Tray, Hinged Acces Doors, Sight Galss,
Marine Lamp, SA & RA & FA Flange
Connections with Low leakage Aerofoil design
Dampers, Vibration Isolation Spring Pads,
thick Rexin connection,Pipe & Cable entry
rubber sleeves, Direction Arrow,Name Plate
with tech. data indication, common skid
structure of MS duly powder coated, Belt
Guard, Motor sliding Rail etc.
1.1 6500 CFM, 65mm SP, 16 TR 4.00 237350.00 NOS 949400.00
1.2 5000 CFM, 65mm SP, 11 TR 1.00 186850.00 NOS 186850.00
1.3 5800 CFM, 65mm SP, 11 TR 1.00 191900.00 NOS 191900.00
Ductable unit : 2.5 TR, 1100 CFM, 40mm SP 2.00 65306.60 NOS 130613.20
2.0
3.0 DX ODU
3.1 8.5 TR 4.00 105444.00 NOS 421776.00
3.2 5.5 TR 3.00 73406.80 NOS 220220.40
3.3 2.5 TR 2.00 58499.20 NOS 116998.40
4.0 Ducting & Insulaiton
GI Ducting with 24G + 22G along with 700.00 1090.80 Sqmt 763560.00
4.1
support, corner & fastners
Duct Insulation with 19mm Thk Nitrile 780.00 816.08 Sqmt 636542.40
4.2
insulation
Aluminum 24g clading on exposed duct 65.00 1033.23 Sqmt 67159.95
4.3
insulaiton
4.4 Canvass connection 8.00 6565.00 NOS 52520.00
4.5 GI Duct Damper 4.00 4891.43 Sqmt 19565.72
5.0 Diffuser / Grille

Page 327
5.1 Aluminum powder coated 4way diffuser 10.00 5163.12 Sqmt 51631.20
5.2 Aluminum powder coated grille 3.00 3805.68 Sqmt 11417.04
6.0 Refrigerant copper piping & Kit
ODU Connection Kit including expansion 9.00 20200.00 NOS 181800.00
6.1
valve, header & all fittings & accessories
All refrigerant piping between indoor & 100.00 1616.00 RMT 161600.00
outdoor units of neatly brazed & should pass
thru in sleeves provide in columns / beams.
At terrace level refrigerant piping and cabling
running should be on the perforated heavy
duty cable tray. Refrigerant pipes should be
6.2 insulated with EPDM Closed Cell Elestomeric
Tube Insulation. Exposed piping shall be
painted with Enicont - 30-36 with UV and
Mechancal protection, fire retardant high
grade glass cloth as per specifications.
Length Liquid copper pipe = 320 RFT
Length Gas copper pipe = 320 RFT
6.3 Refrigerant top up to all system 1.00 121200.00 LOT 121200.00
7.0 Electrical part for HVAC
7.1 AHU starter Panel 6.00 27775.00 NOS 166650.00
Control cables between indoor and outdoor 1.00 30300.00 LOT 30300.00
7.2
unit laid in pvc pipe and clamped .
7.3 Control box 6.00 9595.00 NOS 57570.00
7.4 Corded Remote control 8.00 2525.00 NOS 20200.00
8.0 M.S Structure duly epoxy coated 400.00 101.00 KG 40400.00
SCH40 PVC Drain piping for the units with 6 90.00 181.80 RMT 16362.00
9.0 mm thick nitrile rubber insulation, support,
Fittings & accessories
10.0 Testing & Commissioning charges 1.00 151500.00 LOT 151500.00
302 Design, Supply, Installation, Testing, and
Commissioning of 125 KVA Kirloskar Green
Silent Genset
Canopy:
Ease of Access and Serviceability,
Aesthetically designed, weather and sound
resistant enclosure, Insulation conforms to
UL94-HF1 class for flammability

Controller:
Microprocessor based fully configured,
Graphical bigger LCD display, Best in class
monitoring and diagnostic, Integrable with
AMF

Engine:
O2E Series: Low emission, high efficiency
engines, Compact, Robust and Rugged
Design, 500 hours lube-oil change period

Alternator:
Best In Class Efficiency, Special Windings to
Reduce Harmonics, Vacuum Pressure
Impregnation and epoxy gel coating on
winding

Page 328
 125 kVA Kirloskar Green / Koel Silent Genset 1.00 757500.00 SET 757500.00
Technical Specification:
DG Set Model - RT-125, Rating (kVA) - 125,
Canopy Size (LxWxH) -3500x1250x1750,
Canopy Make - Rishabh, Battery (Ah) - 88,
Starting System - 12V DC, Weight (Kg) -
2000, Fuel Tank Capacity (Ltrs) - 210,
Engine Model - 697TC, Engine Make -
TATA , Engine Power (bhp) - 154, Rated
Speed - 1500, No. of Cylinders - 6

Bore (mm) - 97, Stroke (mm) - 128, Total

Displacement (cc) - 5700, Lube oil Sump
Capacity (Ltrs) - 14, Compression Ratio -
17.5: 01, Aspiration - TC, Cooling System -
Water / Coolant , FIP - MICO Bosch - Inline
Pump, Mech-A1 governing, Emission Norms -
CPCB-II Complaint, Alternator - Kirloskar /
Stamford , Type -Brushless, H Class
Insulation, Frequency - 50 , Voltage - 415

Total Cost Rs. 78918902.39

Say Total Cost Rs. 78918902.00
I/We am/are willing to carry out the work at ______________% above / below percent (should be
and words) of the estimated rates mentioned above. Amount of my/our tender works out as under.
Estimated amount Estimated amount
Put to tender Rs. 7,89,18,902.00 Put to tender Rs. 7,89,18,902.00
Deduct: ______% below Rs. ______________ Add: ______% above Rs. ______________
Net Rs._______________ Net Rs._______________
In words _______________________ In words _______________________

Contractor President, Chief Officer

Sign & Seal Unja Nagarpalika Unja Nagarpalika

Page 329