Technical Data Sheet
Previous Name: Shell Mysella LA
• Reliable Protection
Shell Mysella S3 N 40 • Low Ash Content for Four Stroke
Engines
Low Ash Stationary Gas Engine Oil
Shell Mysella S3 N is a high performance quality oil blended for use in 4-stroke, spark-ignition engines which require
a 'low ash' oil and use natural gas as fuel.
Shell Mysella S3 N satisfies the new generation of stationary gas engines designed to meet the emerging legislation
limiting emissions of NOx, and those which employ the latest 'lean' or 'clean' burn technology.
Performance, Features & Benefits · MTU: MLT 5074, A001061/29E (Category 1), Onsite Energy
· Extended oil life Series 400 and 4000
Significantly prolongs oil life relative to previous generation · MWM: TR 0199-99-2105
gas engine oils by resisting oxidation and nitration, viscosity · MDE: 28xx, 30xx
increase and the formation of harmful acids. · MAK: GCM 34
· Engine protection · Nuovo Pignone: Reciprocating Compressor Service Class A
Shell Mysella S3 N is formulated with low ash and low · Perkins: 4000 series
phosphorus offering extended life to valves and spark plugs · Rolls Royce: KG-1, KG-2, KG-3
and full compatibility with emission catalysts. · Wartsila: 34SG, 32DF, 50DF, 25SG, 28SG, 175SG, 220SG,
180SG, QSW, UD 24 S4G, UD 30S4G
Main Applications
· Meets requirements of:
Waukesha: 220 GL (Pipeline Quality Natural Gas)
· Caterpillar Stationary Gas Engines
· For engines under warranty, Shell advises to contact the engine
· Spark-ignited gas engines fuelled by natural gas manufacturer and Shell representative before using the oil.
· May also be used for landfill and biogases For a full listing of equipment approvals and recommendations,
please consult your local Shell Technical Help Desk, or the OEM
Specifications, Approvals & Recommendations
Approvals website.
Shell Mysella S3 N is suitable in engine types where a "low
ash" oil is required.
Approved by:
· GE Jenbacher: Series 2, 3, 4 Fuel Class A and CAT. Series 6
(Version E&F) Fuel Class A and CAT
· MAN: Gas engines (Natural Gas, Landfill Gas/Digester
ags/Biogas). Dual Fuel (Pilot Diesel),
Page 1 of 2 Shell Mysella S3 N 40, v 2 26.09.2012.11.28
Typical Physical Characteristics
Properties Method Shell Mysella S3 N
SAE Viscosity Grade 40
Kinematic Viscosity @40°C mm²/s ASTM D445 135
Kinematic Viscosity @100°C mm²/s ASTM D445 13.5
Density @15°C kg/m³ ASTM D4052 890
Flash Point, closed cup °C ASTM D93A 230
Pour Point °C ISO 3016 -18
BN mg KOH/g ASTM D2896 5
Sulphated Ash %wt ISO 3987 0.45
Phosphorus ppm ASTM D4047 300
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in these characteristics
may occur.
Health, Safety & Environment
· Health and Safety
Shell Mysella S3 N is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of industrial and personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from your Shell
representative.
· Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
· Oil Analysis
For optimum results regular oil analysis is strongly recommended
· Advice
Advice on applications not covered here may be obtained from your Shell representative.
Note: this product is not designed for automotive gas engines
Page 2 of 2 Shell Mysella S3 N 40, v 2 26.09.2012.11.28
