User Manual
Color video door phone CDV-70P
• Thank you for purchasing COMMAX products.
• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
• The company is not responsible for any safety accidents caused by abnormal operation of the product.
Table of Contents
1. Warnings and Cautions...........................................................................2
2. Part Names..............................................................................................3
3. Contents ..................................................................................................3
4. Wiring and Connection Instructions. ........................................................4
5. Installation.................................................................................................4
6. Operation.........................................................................................................5
7. Setting........................................................................................................6
8. Specifications.............................................................................................7
1. Warnings and caution
Please follow the things described below in order to prevent any danger or
property damage.
Prohibition.
Warning It may cause a serious damage or No disassembly
injury if violated.
No touch
Must follow strictly.
Shows plugging out the power cord
Caution It may cause a minor damage or
injury if violated.
without an exception
Shows the warning and caution for an electric shock.
Shows the warning and caution for a fire.
Warning& Caution
Please don’t disassemble, If an abnormal sound, burning Please don’t insert any When cleaning the product,
repair or rebuild this product smell or smoke is coming out metallic or burnable materials please rub it with a soft and
Cleaning & Use
arbitrarily (please contact the of the product, please plug out into the ventilation hole. dry cloth after plugging out
service center if a repair is the power cable and contact a ·It may cause an electric the power cable. (Please don’t
needed. service center. shock or fire. use any chemical products
·It may cause an electric ·It may cause an electric such as wax, benzene, alcohol
shock or fire. shock or fire. or cleanser.)
2
Warning& Caution
Please don’t use several Please don’t bend the power Please don’t handle the power Please plug out the power
products at the same time on cable excessively or it may cable with a wet hand. cable from the socket when
one power socket. cause an electric shock. ·It may cause an electric not using it for a long period
·It may cause a fire due to an ·fire when using a damaged shock. of time.
abnormal overheating. power cable. ·It may shorten the product
lifespan or cause a fire.
Power & Installation
Please don’t install the Please don’t install the Please don’t use and connect When installing the product
product in the place where product with the lightening this product with other that generates heat, please
there is much oil, smoke or and thunder. products with different rated install the product away from
humidity. ·It may cause an electric voltage the wall (10cm) for the
·It may cause an electric shock or fire. ·It may cause a disorder or ventilation.
shock or fire. fire. ·It may cause a fire due to
the increased internal
temperature.
2. Parts Names 3. Contents
TFT LCD Microphone
Talk Sound Level Control
Call Sound Level Control
Menu Button
Up Button ( △ )
Select Button
Down Button ( ▽ )
Power Switch
Video Phone Wall bracket User Manual
(CDV-70P) for monitor (1EA) (1EA)
Speaker
On/Off & status LED
Talk Button
Door Release Button
Interphone Button Connector Terminal
Monitoring Button
2P SHUNT
Camera Monitor fixing Screw for
connector Screw wall bracket
Only No. 1 (CONN. 4P*200) PHM 3*6 ZnY (GH1T 4*18 ZnW)
camera is available
if you insert 2P
shunt(short pin)
3
4. Wiring and Connection Instructions
▷ Polarity of the camera connector ▷ Polarity of interphone connector
1. Red: Talk (Audio) 3. Yellow: Power (+12V) 1. Red: Talk (Audio) 3. Yellow: Power (+14V)
2. Blue: GND 4. White: Video 2. Blue: GND 4. White: Call signal
☞ When adding a second monitor,
visual and audio quality of video may
deteriorate
☞ When using UTP CABLE[CAT.5] for
better image quality, connect the
rest 4 lines to GND after connecting
4 lines with monitor and camera.
MONITOR DOOR Camera Wiring CAMERA
CAM1
IN IN
G G
CAM2 B+
VD
B+
VD
MONITOR INTERPHONE Wiring INTERPHONE
INTER
IN IN
G G
PHONE B+
CALL
B+
CALL
5. Installation
Cautions
① Avoid the direct sunlight.
② Recommended height is around
1450~1500mm
③ Avoid the installation near magnetic
activity, humid temperature and gas.
4
6. Operation
1. Receiving a calling from visitor.
① When the call button is pressed by a visitor on the door camera, the melody shall be
rung and visitors' image is shown on the screen
(If you do not press the Talk Button, the display will be shown up for 30 seconds and
turned off automatically).
② By pressing the Talk Button, you are able to talk with visitor. By pressing the Door
Release Button, you can open the door for visitor(Door release function can be done
only when the monitor is showing the visitor, on the camera which has door release
function.)
③ When monitor and door camera are on talking, the 3-party talking is possible by
picking up receiver of the interphone. (Camera-Monitor-Interphone talking at same
time.)
④ By pressing Talk Button again you can end the talking and monitor comes back to
stand-by mode.
2. Talk with Interphone.
(1) Calling from the Interphone.
① You will hear calling sound when interphone call the monitor.
② Press Talk Button to talk with the interphone.
③ When monitor and interphone are on talking, the 3-party talking is possible by calling
from the door camera. (Camera-Monitor-Interphone talking at same time.)
(2) Calling the interphone from the monitor.
① Press Talk Button and Interphone Button in order to call the interphone from the
monitor. (Interphone button should be pressed & held until the interphone answers.)
② Then talking is available by picking up the handset of interphone.
3. Monitoring : To see the visitor at the door.
(On stand-by mode) Operation
- By pressing the Monitor button repeatedly, the monitor will work as following in order.
Camera 1 Camera 2 OFF Camera 1 ......
(On talking mode) Operation
- By pressing the Monitor button repeatedly, the monitor will work as following in order.
Camera 1 Camera 2 Camera 1 Camera 2 ......
Caution :
When you use only 1 camera, please connect the short pin(jumper), which is included
in product packing, to the terminal“Camera 2 Select” on the back side of the product.
(When the short pin is connected, the camera 2 does not work.)
5
7. Settings
On talking or monitoring mode, press menu button on the right side of product, and
press △/▽ buttons to adjust display(brightness, contrast, color), to enter the Utility
menu, to check the product information.
•Following 4 buttons on the right side of the product are used for setting.
* Menu, End : MENU * Move up, right : △(UP Button)
* Select, Input : SELECT * Move down, left : ▽(DOWN Button)
1. Display Setting (Brightness, Contrast, Color Adjustment)
On Setting Mode, move to Door Video Set and press Select button to enter the display
setting mode.
(1) BRIGHTNESS : To adjust brightness.
(2) CONTRAST : To adjust contrast.
(3) COLOR : To adjust color.
※ How to adjust
① On DOOR VIDEO SET display press △/▽ to move to the item you want to adjust
② Press Select Button to select the item.
③ Adjust using △/▽ buttons.
④ Press Select Button again to finish.
(4) RESET : Puts back settings to initial setting.
※ How to reset.
① On DOOR VIDEO SET display move to RESET item.
② Press SELECT Button to select the item.
③ Select YES using △/▽ buttons.
④ Press SELECT button to reset.
(5) EXIT : Return to Configuration mode
※ Setting
① Click △/▽ button to move to EXIT in DOOR VIDEO SET menu
② Click SELECT button
2. UTILITY(Extra features)
Move to UTILITY and click SELECT button to enter below menu
(1) CHIME-BELL MUTE : Set call sound mute function
① Move to UTILITY from configuration mode and click SELECT. Then, move to
CHIME-BELL MUTE using △ /▽ button
6
② Click SELECT button
③ Control the volume with △/▽ button
: Bell on / : Bell off
④ After the setting, click SELECT button
(2) EXIT : Return to configuration mode
※ Setting
① Move to EXIT in UTILITY MODE by using △ /▽ button
② Click SELECT button to choose
4-3. INFORMATION (Model and Version checking)
Click △/▽ button to check the Model and version in configuration mode
(1) Model : The name of Model
(2) Version : The version of the product
(3) VIDEO : The video type of the product
(4) SOURCE : The location of the image
4-4. EXIT(End configuration)
Move to EXIT and click Select button.
8. Specifications
Transmission way Door camera 4wires (Polarity), interphone 4wires (polarity)
Rating Voltage 100V-240V~, 50/60Hz (FREE VOLTAGE)
Power consumption On stand-by : 3.5W On talk: 15W
Transmission way HANDS FREE (Voice switch circuit)
Monitor 7" TFT-DIGITAL LCD
Call sound Door : Electronic chime (Sol Mi Do), interphone : Beep
Display Monitoring : 30 ±5sec , Talk : 60 ±5sec
Pie 0.5mm 0.65mm 0.8mm
28m 50m 70m
Distance
Working temperature 0 ~+40℃ (32℉ ~ 104℉)
Dimension 243.0(W) X 168.0(H) X 30.0(D)
7
513-11, Sangdaewon-dong,
513-11, Sangdaewon-dong, Jungwon-gu,
Jungwon-gu, Seongnam-si,
Seongnam-si, Gyeonggi-do,
Gyeonggi-do, Korea
Korea
Int’l Business
Int’l Business Dept.
Dept. Tel.
Tel. :: +82-31-7393-540~550
+82-31-7393-540~550 Fax.
Fax. :: +82-31-745-2133
+82-31-745-2133
Web
Web site
site :: www.commax.com
www.commax.com
PM0770P00010 Printed In Korea / 2016.07.104
