Scribd Logo
Upload

Welcome to Scribd!

  • 287 views

    Experiment 5: AIM: Design and Simulate Magic Tee Using CST

    Uploaded by

    Vishal Manwani
    The document describes simulating a magic tee using CST software. It provides the theory of how a magic tee works as a 3dB coupler and its port configuration. It then outlines the 18 step procedure to design the magic tee in CST, including defining material properties, dimensions, waveguide ports and running the simulation. It lists the S-parameter and field results that can be observed and analyzed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Experiment 5: AIM: Design and Simulate Magic Tee Using CST

    Uploaded by

    Vishal Manwani
    287 views16 pages
    The document describes simulating a magic tee using CST software. It provides the theory of how a magic tee works as a 3dB coupler and its port configuration. It then outlines the 18 step procedure to design the magic tee in CST, including defining material properties, dimensions, waveguide ports and running the simulation. It lists the S-parameter and field results that can be observed and analyzed.

    Original Title

    U17EC022 Exp 4

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes simulating a magic tee using CST software. It provides the theory of how a magic tee works as a 3dB coupler and its port configuration. It then outlines the 18 step procedure to design the magic tee in CST, including defining material properties, dimensions, waveguide ports and running the simulation. It lists the S-parameter and field results that can be observed and analyzed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    287 views16 pages

    Experiment 5: AIM: Design and Simulate Magic Tee Using CST

    Uploaded by

    Vishal Manwani
    The document describes simulating a magic tee using CST software. It provides the theory of how a magic tee works as a 3dB coupler and its port configuration. It then outlines the 18 step procedure to design the magic tee in CST, including defining material properties, dimensions, waveguide ports and running the simulation. It lists the S-parameter and field results that can be observed and analyzed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 16

    EXPERIMENT 5

    Date: 19-03-2021
    AIM: Design and simulate magic tee using CST.

    SOFTWARE USED: CST

    THEORY:

    An E-H Plane Tee junction is formed by attaching two simple waveguides one parallel and
    the other series, to a rectangular waveguide which already has two ports. This is also called
    as Magic Tee, or Hybrid or 3dB coupler.
    The arms of rectangular waveguides make two ports called collinear ports i.e., Port 1 and
    Port 2, while the Port 3 is called as H-Arm or Sum port or Parallel port. Port 4 is calledas
    E-Arm or Difference port or Series port.
    The cross-sectional details of Magic Tee can be understood by the following figure.

    PROCEDURE:

    1. Click on New Template to create a new project template.

    2. Click on the MW & RF & OPTICAL Click on Antennas Then click NEXT
    U17EC073
    V L

    3. Click on Waveguide Then, Click on Next

    4. Click on Time Domain and select the shown units in the foll. steps

    5. Select the frequency range as 6GHz to 12GHz and E-field, H-field monitor.
    U17EC073
    V L

    6. Give a desired name to your template and click Finish.

    7. In the Modelling tab, Shapes section, select Brick. Press Esc key to show dialog box In
    the dialog box shown, set the following values for the Collinear Waveguide In the
    Material drop-down menu, Load material from library, then select Copper
    (annealed).

    8. Repeat the Step 7 with following dimensions for the inner surface.
    U17EC073
    V L

    9. Subtracting Inner1 from Outer1:

    In the Navigation Tree, click on outer1 in the components section In the Modelling
    tab, Tools section, click on Boolean Click on Subtract from the drop-down menu
    Click on inner1 in the components section in the Navigation Tree.

    10. Repeat Step 7 with following dimensions for the cut to insert H-arm Repeat step 9
    to subtract Cut from Outer1.
    U17EC073
    V L

    11. Repeat Step 7 with the following dimensions for the outer and inner surface of H-
    armrespectively Repeat Step 9 to subtract Inner2 from Outer2.

    12. Repeat Step 7 with following dimensions for the cut to insert E-arm Repeat Step 9
    to subtract Cut from Outer1(Collinear arm).

    13. Repeat Step 7 with following dimensions for the outer and inner surface of the E-
    armrespectively Repeat Step 9 to subtract Inner3 from Outer3.
    U17EC073
    V L

    14. In the Modelling tab, Picks section, click on Picks click on Pick Face from the drop-
    down menu. Double click on the surface of the hollow rectangular face.

    15. In the Simulation tab, Sources and Loads section, click on Waveguide port. In the
    Waveguide Port dialog box, Position section, update values as shown.

    16. Repeat Steps 14 & 15 on the other three hollow faces.

    17. In the Simulation tab, Solver section, click on Setup Solver shown above. If the
    frequency range dialog box shows, set the range from 6GHz – 12GHz, click OK. In the
    Time Domain Solver Parameters dialog box, click on Start. The simulation begins.

    18. After the simulation completes, you can find 1D and 2D/3D results in their respective
    sections in the Navigation tree.

    Structure of the magic tee with Ports assigned:


    U17EC073
    V L

    RESULTS:

    (i) S1,1

    (ii) S2,1

    (iii) S3,1
    U17EC073
    V L

    (iv) S4,1

    (v) S1,2

    (vi) S2,2
    U17EC073
    V L

    (vii) S3,2

    (viii) S4,2

    (ix) S1,3
    U17EC073
    V L

    (x) S2,3

    (xi) S3,3

    (xii) S4,3
    U17EC073
    V L

    (xiii) S1,4

    (xiv) S2,4

    (xv) S3,4
    U17EC073
    V L

    (xvi) S4,4

    (xvii) E-field (9 GHz) [1]

    (xviii) E-field (9 GHz) [2]


    U17EC073
    V L

    (xix) E-field (9 GHz) [3]

    (xx) E-field (9 GHz) [4]

    (xxi) H-field (9 GHz) [1]


    U17EC073
    V L

    (xxii) H-field (9 GHz) [2]

    (xxiii) H-field (9 GHz) [3]

    (xxiv) H-field (9 GHz) [4]


    alAsSMAte
    Date
    Page

    A8bignmpme
    A sioma pooen 32 mw fed ito
    LoLliAa9po7 o o lo03% H-plome Tee
    po2
    LOhen oeSpo % a te>UmaOd by mat hed
    cad

    s m g poe is fed imdo foa


    32xL03
    O

    Seckie aAmodxix S
    YS

    Pos s Pim
    Pous / 3 oS

    Po
    L 16 mwN
    alAsSMAte
    Date
    Page

    A &imada pooe 32mw ed nto o o


    Colemll post3 G a QoloLA Maao Tee
    VeAesun do poooe hm semau a pohil Wm
    O Pos t8 Oe t osmndod by matrhed locd

    Am ALmapooo Ibfed imto Post


    Pim 32x10S|

    O
    ScottanngMetir S: O

    32xLO3
    V
    O

    OD

    fo
    Jbra

    You might also like