Scribd
Upload
63 views2 pages

X80 (NACE) Up To X140: Product Information

Eisenbau Krämer supplies high strength steel pipes made from materials like X80, X100, and X140 steel to reduce weight in offshore oil and gas installations. These pipes combine low hardness with consistent strength longitudinally and transversely. Micrographs show the microstructure of X80 and X100 steel welds. Eisenbau Krämer offers pipes in diameters from 16 to 48 inches and lengths up to 42 feet with mechanical properties maintained after heat treatment. Research is ongoing to develop pipes up to X120/X140 strength.

Uploaded by

yrdna nawaiteos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
63 views2 pages

X80 (NACE) Up To X140: Product Information

Eisenbau Krämer supplies high strength steel pipes made from materials like X80, X100, and X140 steel to reduce weight in offshore oil and gas installations. These pipes combine low hardness with consistent strength longitudinally and transversely. Micrographs show the microstructure of X80 and X100 steel welds. Eisenbau Krämer offers pipes in diameters from 16 to 48 inches and lengths up to 42 feet with mechanical properties maintained after heat treatment. Research is ongoing to develop pipes up to X120/X140 strength.

Uploaded by

yrdna nawaiteos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Product Information:

X80 (NACE) up to X140


High Strength Steel Pipes
Product: High Strength Steel Pipes

The offshore oil & gas industry continually Low levels of hardness are particularly
looks to reduce the weight of its installations important to guarantee good toughness
by increasing the strength of materials used. properties, while maintaining weight saving
As a world class supplier of steel pipes, mechanical strength.
Eisenbau Krämer responded to these
challenges by developing and now supplying The following micrographs show the
longitudinally welded steel pipes produced microstructure of the weld.
from the latest generation of high strength
steels, such as API 5L X80, X80 NACE, X100,
X120 and X140, produced in both the TMCP
and Q&T supply condition. These products
find service in applications including:

Drilling Riser, Riser Pipes,


Gathering Lines, Wellhead Houses,
Line Pipes, Mother Pipes for Bend

To be successfully implemented into a design,


these products need to combine low levels of
hardness with reliable and consistent yield Micrograph of steel X100, weld
strength in both the longitudinal and transverse
directions. Additionally, mechanical properties
must remain within specification during further
fabrication of the finished pipes, including
stress relieving heat treatment. Typical
mechanical values taken from EBK pipes are
given below:

X80
Tensile Strength Rm : 621 - 827 MPa
(in transverse direction)

Yield Strength Rt0.5 : 552 - 690 MPa


(in transverse direction)

Elongation A 2": min. 30%


CVN Energy Value: 42/34J at -20 °C (-4 °F) Micrograph of steel X80, weld
Hardness: max. 248 HV10

X100 The table below shows the wide range of


dimensions Eisenbau Krämer offers to the
Tensile Strength Rm : min. 770 MPa
(in transverse direction) market:
Yield Strength Rt0.5 : min. 690 MPa
(in transverse direction) Outside diameter: 16"-48" (406-1.219 mm)
Elongation A 2": min. 25% Length: max. 42' (13.200 mm)*
Hardness: max. 300 HV10 *note: please ask for further dimensions

Research and development programmes of pipes with strengths up


to and including X120/X140 and high strength steels which meet the
requirements of NACE are currently in progress. For further information
please contact:
Sales Linepipes Technical dept. Eisenbau Krämer mbH
Mr. Winchenbach Dr. Kuhles D-57223 Kreuztal
Phone: +49 (0) 2732 588 115 Phone: +49 (0)2732 588 190 Phone: +49 (0)2732 588 0
E-Mail: [email protected] E-Mail: [email protected] Fax: +49 (0)2732 588 102
Web: www.eisenbau-kraemer.de

You might also like