PRODUCT DATA

Provolt™ Series Dual Relay Multi-

Technology (M/T) Occupancy Sensors

Provolt™ Series Dual Relay Multi-Technology (M/T) Occupancy Sensors

Light Pipe

DESCRIPTION FEATURES
The Leviton Provolt™ Series Dual Relay Occupancy • Sensors combine both PIR and U/S
sensors combines line voltage occupancy sensors technology for unrivaled performance and
and photocells into a self-contained unit. The reliability
integrated design alleviates the need for separate • Sensors use PIR technology to initially turn
power pack and occupancy sensor wiring making lights ON, and use U/S technology to keep
it a low-cost, efficient energy solution for new the lights ON
construction and retrofits. For true daylight • Exclusive false-detection software assures
harvesting applications, an integrated photocell lights are ON only when needed
provides consistent daylight design levels by • Auto temperature adjusts tech sensitivity
actively switching the connected load(s) ON for optimal detection/operation
and OFF in response to available natural light • Auto-adapting: time delay and sensitivity
to maximize energy savings. Vacancy timers are continually adjusted to occupancy
continually analyze and adjust to changing pattern of use
conditions using the latest microprocessor-based • Vacancy sensing time outs
technology to optimize performance. Auto-ON/ - Delayed OFF timer
auto-OFF automatically turns lights ON and - Exclusive walk-through feature
keeps them ON when occupancy is detected and • False detection timer: (M/T) PIR scans for
automatically turns lights OFF when the space movement and shuts lights off after 31
is vacant or unoccupied. Wire terminals allow for minutes without movement, preventing false
simple connection to a line-voltage circuit and are triggers from HVAC systems
ideal for existing buildings with limited access to - Time delay and saved settings are
wiring and new construction. protected during power outages and will
return to the last known state
APPLICATIONS • Output short circuit protection
• Can be used to comply with ASHRAE 90.1 and • Industry-exclusive self-configuring local
2016 Title 24, Part 6 occupancy/vacancy sensing, manual switch input: momentary or
automatic shut-off, daylight harvesting and maintained switches are supported
stairwell control requirements • Presentation mode allows user to turn lights
• Auto-ON/auto-OFF OFF and keep them OFF while the room is
• Manual-ON/auto-OFF occupied
• Dual Relay Modes Include: • Adjustable time delay: 30s, 5min, 10min,
- Fan control 20min, 30min
- Auto-ON/manual-ON • Test mode for simplified commissioning
- Stairwell control • Manual switch and Emergency Override are
- Step dimming—alternating daylighting Class 1 and Class 2 circuits. Class 2 circuits
levels provided for flexibility
- Step dimming - load 1 primary • Industry-exclusive “fail-safe” circuitry: In the
event of product failure, return-to-closed
feature causes the relay to default ON which
eliminates life safety concerns
Leviton Manufacturing Co., Inc. Global Headquarters
201 North Service Road, Melville, NY 11747-3138 tech line 800-824-3005 fax 800-832-9538
©2017 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
 PRODUCT DATA
FEATURES Photocell Features
• Industry-exclusive H.I.S. (High Inrush Stability) • Daylight harvesting applications:
technology designed to handle today’s high inrush -Auto-calibration (automatic daylight
electronic ballast loads and offer unmatched durability calibration): photocell intelligently measures
and service light levels to determine optimal daylight
• Robust and reliable mechanically held latching design levels for closed loop applications
relay provides dependability and robust performance - Closed loop: photocell detects total
for all load types and provides energy savings over photometric light from daylight or electric
electronically held relays sources in the space
• Field of view: units from 500 to 2,000 square feet - Open loop: photocell detects measurement
available of natural light only (sunlight from window or
• Lenses are easily replaceable and color-coded—red skylight)
(mid-range), black (extended range) and blue (high • Adjustable daylight design levels: Normal (OFF),
density) for contractors and end-users to easily Manual (ON/OFF) and Auto Calibration
identify lenses from the ground • Integrated photocell tested to less than 1 Fc
Provolt™ Series Dual Relay Multi-Technology (M/T) Occupancy Sensors

• Visual LED indicators for all states: accuracy

- Red—blinks when infrared is detecting motion and INSTALLATION
during photocell manual calibration; solid during • Easy installation into junction boxes with Leviton-
device malfunction exclusive screw guides, coasters and terminal
- Green—blinks when U/S is detected; solid during blocks
auto calibration • Front cover snaps on and off for ease of
- Yellow—blinks during test mode; solid with installation
emergency/BMS input
- Blue—blinks when knob settings are changed and
during photocell override PHOTOCELL PLACEMENT*
RATINGS AND TESTING Open Loop Application - Angled Light Pipe
• Zero-crossing circuitry for extended life of the relay Provolt
• Tested to exceed 1 million switching cycles under
standard loads
45
°

• Multiple compliance and regulatory UL testing— Light Fixture

consult factory for details Peak

• Passed rigorous NEMA 410 testing for electronic Sensitivity

ballast rating 9’

• BMS Input/Emergency Override: UL 924 listed for 4’

Emergency and Egress lighting control

PHOTOCELL OPERATION
Open Loop - Angled Light Pipe

Note: Long side of angled light pipe must

face toward natural light source (window)
Closed Loop Application - Flat Light Pipe
OPEN LOOP
7 Provolt
6 OFF trigger point Noon
5 Lights turn OFF

4 4’ Light Fixture
3 ON trigger point
DDL Lights turn ON
2
Lights ON
1 Night time Dawn Dusk
0 Window

Closed Loop - Flat Light Pipe

68° 9’
Peak Sensitivity

CLOSED LOOP
7 2.5x DDL
Zone OFF
6
5
Noon
4 Typical Dayligt Zone, about 10’
Dawn Dusk
3
2
Lights ON
1 DDL 1.25x DDL
Zone ON
0 *May require more than one occupancy sensor for total room coverage
PRODUCT DATA

FIELD OF VIEWS

TOP VIEW
TOP VIEW
TOP VIEW 15 20 TOP VIEW
20 20
16
10
11.5 11.5
11.5
8.5
5
8.5

0
0 0
0
5

8.5
11.5
8.5
10 11.5
8.5
11.5
15 20
SIDE VIEW Major Motion, IR Major Motion, IR
20
20
Major Motion, IR Minor Motion, Ultrasonic
20 Minor Motion, Ultrasonic
SIDE VIEW SIDE VIEW SIDE VIEW
8 Minor Motion, Ultrasonic Major Motion, Ultrasonic
8 Major Motion, Ultrasonic 8
Major Motion, Ultrasonic

0 0 0
20 15 11 9 5.5 3 0 3 5.5 9 11 15 20
0 3 5.6 9 11 15 20 30 25 20 15 10 5 0 5 10 15 20 25 30 23
20
17
15 11 9 5.6 3 0 3 5.6 9 11 15
17
20
23
32 22.5 22.5 32
17 23

O2C05-MDW Multi-Range Lens O2C10-MDW O2C20-MDW

(High Density Lens - Blue) (Included with all PIR (Extended Range Lens - Black) (Extended Range Lens- Black)
and Multi-Tech Models)

DIMENSIONS

Here Occupancy Sensors

1.16”
(29.60mm)
4.80”
(121.92mm)

1.13”
(29.91mm)

Title Goes(M/T)
0.94”
(24.06mm)

Multi-Technology
2.39”
(60.71mm)

INSTALLATION

4”x4” Cosmetic Adapter

Provolt™ Dual Relay Sidebar

Screw Guides

Flat light pipe

Angled light pipe

Sensors conveniently mount to a standard 4” x 4” square or octagon

electrical box per NEC standards.

Leviton Manufacturing Co., Inc. Global Headquarters

201 North Service Road, Melville, NY 11747-3138 tech line 800-824-3005 fax 800-832-9538
©2017 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
 PRODUCT DATA

SPECIFICATIONS

ELECTRICAL
Input Voltage 120V, 50/60Hz 230V, 50Hz 277V, 50/60Hz
8A, Electronic 6A/6AX, Electronic 5A, Electronic
Ballast, 800W, Ballast, Magnetic Ballast,
Load Rating Tungsten, Ballast, Tungsten, 1200VA Ballast,
800VA Ballast, 1/3 HP Motor 1/3 HP Motor
1/4 HP Motor
Current Consumption 60-30ma
ENVIRONMENTAL
Operating Temperature 32-104° F (0-40° C)
(M/T) Occupancy Sensors

Storage Temperature -15-160° F (-26-71° C)

Relative Humidity 0-90% non-condensing
OTHER
Listings Can be used to comply with ASHRAE 90.1 and 2016 Title
24, Part 6 occupancy/vacancy sensing, automatic shut-
off, daylight harvesting and stairwell control requirements,
UL 773A (Occupancy Standard), UL 924 (Emergency
Equipment), cUL listed, CE compliant, NOM certified, RoHS
compliant, NY LLC48 compliant
Warranty 5-Year Limited Warranty
Title Goes Here

ORDERING INFORMATION
CAT. NO. DESCRIPTION
Multi-Technology

Multi-Technology Ceiling Mount Line Voltage Dual Relay

O2C05-MDW Occupancy Sensor w/Integrated Photocell, 500SF,
120-277V, extended range lens installed
Multi-Technology Ceiling Mount Line Voltage Dual Relay
O2C10-MDW Occupancy Sensor w/Integrated Photocell, 1,000SF,
120-277V, extended range lens installed
Sidebar

Multi-Technology Ceiling Line Voltage Dual Relay Mount

Occupancy Sensor w/Integrated Photocell, 2,000SF,
O2C20-MDW
120-277V, extended range lens installed, mid-range
included
Provolt™ Lens Dual Relay

Leviton Manufacturing Co., Inc. Global Headquarters

201 North Service Road, Melville, NY 11747-3138 tel 800-323-8920 fax 800-832-9538 tech line (8:30AM-7:00PM ET Mon-Fri) 800-824-3005

Leviton Manufacturing Co., Inc. Energy Management, Controls and Automation

20497 SW Teton Avenue, Tualatin, OR 97062 tel 800-736-6682 fax 503-404-5594 tech line (6:00AM-4:00PM PT Mon-Fri) 800-959-6004

Visit our Website at: www.leviton.com/provolt G-9149B/L17-aa

©2017 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice. REV DEC 2017