Scribd
Upload
68 views1 page

E Cores and Accessories E42/21/15: General Data For 10-Pins E42/21/15 Coil Former Parameter Specification

This document provides specifications for a 10-pin E42/21/15 coil former including: 1) The coil former is made of glass-reinforced polyamide that meets UL 94-HB flame retardant standards. 2) Pins are made of copper-tin or tin-lead alloy and plated. 3) It has a maximum operating temperature of 120°C and passes IEC thermal testing standards.

Uploaded by

Angamuthu Ananth
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
68 views1 page

E Cores and Accessories E42/21/15: General Data For 10-Pins E42/21/15 Coil Former Parameter Specification

This document provides specifications for a 10-pin E42/21/15 coil former including: 1) The coil former is made of glass-reinforced polyamide that meets UL 94-HB flame retardant standards. 2) Pins are made of copper-tin or tin-lead alloy and plated. 3) It has a maximum operating temperature of 120°C and passes IEC thermal testing standards.

Uploaded by

Angamuthu Ananth
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Ferroxcube

E cores and accessories E42/21/15

General data for 10-pins E42/21/15 coil former

PARAMETER SPECIFICATION
Coil former material polyamide (PA6.6), glass reinforced, flame retardant in accordance with
“UL 94-HB”; UL file number E41871(M)
Pin material copper-tin alloy (CuSn), tin-lead alloy (SnPb) plated
Maximum operating temperature 120 C, “IEC 60085”, class E
Resistance to soldering heat “IEC 60068-2-20”, Part 2, Test Tb, method 1B: 350 C, 3.5 s
Solderability “IEC 60068-2-20”, Part 2, Test Ta, method 1: 235 C, 2 s

5.08
32 0.2 29.2 max. 0.05
handbook, full pagewidth
0
28 0.1 15
0.2
25.5 min. 12.6 0.2
0

8.05

34.2
18
0 15.7 0.2 max.
0.3 0

0.15
1.3
0
5

6.5 0.2

CBW050
5 0.2 0.4 3 2
39 max. 1.1

Dimensions in mm.

Fig.3 E42/21/15 coil former; 10-pins.

Winding data for 10-pins E42/21/15 coil former

MINIMUM AVERAGE
WINDING
NUMBER OF WINDING LENGTH OF
AREA TYPE NUMBER
SECTIONS WIDTH TURN
(mm2)
(mm) (mm)
1 178 25.5 93 CPH-E42/21/15-1S-10P

You might also like