Smart Automation System

TM 1703 emic
SICAM 1703 – flexible for all applications

Answers for energy.

The new member
of the proven SICAM 1703 family
With growing pressure on costs in virtually all processes, there is an increasing need to also
automate smaller stations to make better and more reliable use of existing equipment. Modern,
high-performance automation systems allow the integration of smaller stations to provide
universal and reliable management of complex processes. But smaller stations are also being
equipped with greater functionality because of the increased demand for more information.
From straightforward monitoring activities to control functions and the integration of additional
equipment, modern systems need to offer a wide range of functionality.

Flexible use of TM 1703 emic Integrated Web server for simple engineering
As the logical consequence of these demands, Keeping the engineering process as simple as possible
TM 1703 emic (Terminal Module 1703 enhanced was a top priority with the TM 1703 emic. The master
microcontrol) represents the expansion of the proven control element has an integrated web server for
product TM 1703 mic. TM 1703 emic is a low-cost, configuration, diagnostics and testing, so that no
flexible and modular telecontrol station, and is part special tools or additional licenses are needed. The
of the proven SICAM 1703 automation family. The tool is already integrated in TM 1703 emic and is
hardware consists of a master control element and operated with a standard Web browser. Engineering,
various I/O modules, and is designed for DIN rail diagnostics and testing of the TM 1703 emic can
mounting. The proven I/O modules can be used and also be carried out with the proven TOOLBOX II,
fitted on all products in the SICAM 1703 family. the integrated engineering tool for the entire
SICAM 1703 family.
The master control element is used for interfacing
and supplying the I/O modules and provides three TM 1703 emic puts everything on one card
communication interfaces (1 x Ethernet and 2 x The TM 1703 emic receives the parameterizing data
serial) to meet a wide range of requirements. via a flash card. Consequently, the correct parameters
Complete flexibility is ensured here as well, because are always available locally and there is no need to
different communications protocols can be allocated load data from a PC. This makes exchanging devices
freely. The option of automation functions rounds during servicing a straightforward Plug & Play opera-
out the range of functionality of the TM 1703 emic. tion, and it is very simple to transfer configuration
data to the replacement device with the flash card.
For this reason, and because of the comprehensive
remote diagnostics options, downtimes can be
reduced to a minimum.
 Control system

IEC 60870-5-104 / DNPi IEC 60870-5-101 IEC 60870-5-101

TM 1703 emic
IEC 60870-5-104 / DNPi
TM 1703 emic TM 1703 emic

e.g. Modbus
IEC 60870-5-103

TM 1703 emic

IEC 60870-5-103 /

IEC 60870-5-101
IED

Modbus
TM 1703 emic

Practical applications of TM 1703 emic

Thanks to its node functionality, TM 1703 emic has ■ Dial-up traffic
many different potential applications. TM 1703 emic – A wide range of connection-oriented trans-
can be used as an ordinary telecontrol substation mission media (analog, ISDN, GSM, TETRA) are
with any kind of communication to a control center. supported as standard for dial-up traffic as well.
If TM 1703 emic doesn’t offer adequate signal scope, ■ LAN/WAN
additional TM 1703 emic systems can be connected. – IEC 60870-5-104/DNPi communication based on
Freely programmable application programs for local Ethernet TCP/IP is used for communication via
control functions complete the all-round versatility LAN/WAN networks.
of the TM 1703 emic.

Highly flexible options for

communication to the control center:
■ Multi-point traffic
– External data transmission equipment
can be connected via the V.28 interface
for multi-point traffic transmission.

TM 1703 emic – The system in detail ■ Interfacing and supplying of the I/O modules
Functions of the master control element ■ 3 communication interfaces, with different
■ Central processing functions individual communication protocols
■ Storing of the parameters and the (IEC 60870-5-101, 103, 104, Modbus,
firmware on a flash card DNP 3.0, other protocols on request)

Power Master control max. 8 I/O modules

supply element
Technical data
Type designation Order designation Description I/O modules
Master control element CP-6010 6MF11130GA100AA0 Processing & 3 x Comm. (V.28, RS485, Ethernet) max. 8

Flash card Flash card 6MF12131GA050AA0 Memory card for parameters and firmware

I/O modules DI-6100 6MF11130GB000AA0 Binary input 2 x 8, 24 – 60 VDC

DI-6101 6MF11130GB010AA0 Binary input 2 x 8, 110 – 220 VDC
DI-6102 6MF11130GB020AA0 Binary input 2 x 8, 24 – 60 VDC 1 ms
DI-6103 6MF11130GB030AA0 Binary input 2 x 8, 110/220 VDC 1 ms
DI-6104 6MF11130GB040AA0 Binary input 2 x 8, 220 VDC
DO-6200 6MF11130GC000AA0 Binary output transistor 2 x 8, 24 – 60 VDC
DO-6212 6MF11130GC120AA0 Binary output relay 1 x 8, 24 – 220 VDC, 230 VAC
DO-6220 6MF11130GC200AA0 Command output basic module
DO-6221 6MF11130GC210AA0 Command output basic module with measurement
DO-6230 6MF11130GC230AA0 Command output relay module
AI-6300 6MF11130GD000AA0 Analog input 2 x 2, ± 20 mA / ± 10 mA / ± 10 V
AI-6307 6MF11130GD070AA0 Analog input 2 x 2, ± 5 mA
AI-6308 6MF11130GD080AA0 Analog input 2 x 2, ± 1 mA / 2 mA
AI-6310 6MF11130GD100AA0 Analog input 2 x 2 Pt100
AO-6380 6MF11130GD800AA0 Analog output 4 x ± 20 mA / ± 10 mA / ± 10 V

Power supply modules PS-6630 6MF11130GG300AA0 Power supply module 24 – 60 VDC EMC+
PS-6632 6MF11130GG320AA0 Power supply module 110 – 220 VDC EMC+

Accessories
Modems CE-0700 6MF11020BC000AA0 V.23 Leased line modem
CE-0701 6MF11020CA810AA0 VFT channel modem
Converters CM-0827 6MF11110AJ270AA0 Converter V28/optical
CM-0819 6MF11112AJ100AA0 Converter V28/RS422; RS485 with electrical isolation

Ambient conditions – 25 ... + 70 °C

Dimensions (W x H x D) 134 x 127 x 72 mm (master control element)

67 x 127 x 72 mm (power supply, I/O modules)
TM 1703 emic – The advantages at a glance
TM 1703 emic is a universal system suitable for
use in electricity substation, hydropower plants,
pipelines, gas distribution stations, railway power
supplies and tunnels, for building protection, and
as an alarm signaling system.
■ Integrated node functionality for interfacing
additional equipment via various protocols
■ Simple configuration via Web browser,
without special tools or licenses, configuration,
diagnosis and testing via integrated Web server
■ As an alternative, engineering is also possible
with the TOOLBOX II
■ Integrated remote maintenance, remote
diagnostics and remote parameterization
■ Application programs for local controls
and interlocks
■ Plug & Play for start-up and servicing through
use of flash card for data storage
■ Modules can be exchanged with no need
for a tool
■ Direct connection of the process cables
■ Mounting on 35-mm DIN rail
Published by and copyright © 2009:
Siemens AG
Energy Sector
Freyeslebenstrasse 1
91058 Erlangen, Germany

Siemens AG
Energy Sector
Power Distribution Division
Energy Automation
Humboldtstrasse 59
90459 Nuremberg, Germany
www.siemens.com/energy-automation

For more information, please contact

our Customer Support Center.
Phone: +49 180/524 70 00
Fax: +49 180/524 24 71
(Charges depending on provider)
E-mail: [email protected]

Power Distribution Division

Order No. E50001-G720-A144-X-4A00
Printed in Germany
Dispo 06200
TH 345-090253 480301 WS 04093.0

Printed on elementary chlorine-free bleached paper.

All rights reserved.

Trademarks mentioned in this document
are the property of Siemens AG, its affiliates,
or their respective owners.

Subject to change without prior notice.

The information in this document contains general
descriptions of the technical options available, which
may not apply in all cases. The required technical
options should therefore be specified in the contract.

www.siemens.com/energy