Fluid Pressure and Forces Worksheet 2: PART 1: Essay Instructions
Fluid Pressure and Forces Worksheet 2: PART 1: Essay Instructions
Discuss the difference of hydrostatic forces acting on plane and curve surfaces.
Discuss what is a hydrostatic uplift.
Someone claims that the absolute pressure in a liquid of constant density doubles when
the depth is doubled. Do you agree? Explain.
What is the difference between gage pressure and absolute pressure?
A tiny steel cube is suspended in water by a string. If the lengths of the sides of the cube
are very small, how would you compare the magnitudes of the pressures on the top,
bottom, and side surfaces of the cube?
Problem 1. For the vessel containing glycerin under pressure as shown, find the pressure at the
bottom of the tank. Note: Sue 12.24 as the specific gravity of the glycerin.
Hydraulics
Mark Heintje A. Cuanan
____________________________________________________________________________
Problem 2: An open tank contains 5.7 m of water covered with 2.8 m of kerosene ( = 8 kN/m3).
Find the pressure at the interface and at the bottom of the tank.
Problem 2: Gate Ab of the figure shown is rectangular (3.5m long x 2.00 m wide), and hinged
along B. Find the horizontal force H to place the system in equilibrium.
Problem 3: The half-parabolic segment shown in the figure is vertically submerged in water.
Determine the magnitude and location of the pressure force on one face of the surface.
Problem 4.
Hydraulics
Mark Heintje A. Cuanan
____________________________________________________________________________
Problem 5.
Hydraulics
Mark Heintje A. Cuanan
____________________________________________________________________________
Problem 6.
Hydraulics
Mark Heintje A. Cuanan
____________________________________________________________________________
Problem 7.
Problem 8.
Problem 9.
Problem 10. Compute the stress in a 90 cm pipe with a wall thickness of 9.5mm if water fills it
under a head of 70m.