Scribd
Upload
4K views

Assignment 10@

The document outlines control activities for 4 different processes: 1) Construction of a bridge which includes proper understanding of construction technology, timely decision making, assigning a responsible contractor, soil testing, using critical path method, material management, and safety measures. 2) Manufacture of microchips which includes controlled design, fabrication, quality testing using engineering applications, introducing acceptance limits, and documented design procedures. 3) Installation of a power plant which includes electrical and control engineering, mechanical fitting and maintenance, design activities, machining, and manufacturing of power equipment. 4) Manufacture of tricycles which includes carefully selecting technology, proper supervision, and proper material management.

Uploaded by

Berjame Tan May
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
4K views

Assignment 10@

The document outlines control activities for 4 different processes: 1) Construction of a bridge which includes proper understanding of construction technology, timely decision making, assigning a responsible contractor, soil testing, using critical path method, material management, and safety measures. 2) Manufacture of microchips which includes controlled design, fabrication, quality testing using engineering applications, introducing acceptance limits, and documented design procedures. 3) Installation of a power plant which includes electrical and control engineering, mechanical fitting and maintenance, design activities, machining, and manufacturing of power equipment. 4) Manufacture of tricycles which includes carefully selecting technology, proper supervision, and proper material management.

Uploaded by

Berjame Tan May
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Assignment 10

List down the control activities that may be useful to any of the following:

1. the construction of the bridge


Step 1
Control activities That should be conducted during the construction of bridge :-

Firstly -Their should be proper and complete understanding of the entire construction
technology to all the project construction staff .

There a requirement of punctuality for making decisions, approval of design and


drawings and financial management should occur timely. Timely decision will result in
the smooth flow of the activities by paying its rich dividends.

The Project should be assigned to a proper and responsible contractor in order to


reduce any risk. The proper type of land for the foundation of particular bridge design,
should be decided properly.

As this matter deals with the life factor of bridge and also because this is an initial time
consuming activity. So the soil parameters should be tested in the material testing
laboratory before the starting of the foundation work.

Step 2
In order to determine the shortest path in the project Critical path method should be
used and If required than the latest software technology tool can also be used. should
The working staff should have a Pretraining session regarding the project.

Proper material management and required facilities for servicing and repair must be
established. and all safety measures must be followed.

The revised design should be, if any, updated and clarified without any delay.
The department as well as contractor requires a proper and systematic management of
documents .

The layout is to be framed in such a way that there would be minimum movement of
material, equipment and personnel and also the Stone crusher should be placed that
wherever required suitably located.

Offices, generators, store should not be located at the place of dust. The service road
should be properly maintained. Receipt and dispatch of equipment be kept in proper
format to keep of details of its utilization at site.

2. the manufacture of microchips

The control activities in microchips manufacturing chips include;


 to deliver a quick turn around and supply consistent quality in manufacturing microship,
there must be controlled in designing , water fabrication, final testing and assurance in
quality.
 To test quality, engineering applications are used for continuous improvement like in-
line process control to watch performance and to signal during abnormal conditions.
 The acceptance limits are introduced to watch quality. Analysis of designed
experiments, test data, and defect density data. Predictions are made on the reliability
of results supported the monitoring.
 The performance and reliability of the microchips are considered within the design
phase too. There must be documented procedures for the designing phase and to verify
if the merchandise meets the standard standard and requirements.
3. the installation of a power plant .

Step 1
Power plant maintenance is critical for all power plant activities, both for the protection of plant
workers and to maintain all assets and facilities in proper working conditions.

Step 2
 The control activities of the installation of a power plant are as follows:
 Electrical and control engineering activity in power plants and nuclear power plants.
 Mechanical fitting and maintenance activity in power plants and nuclear power plants.
 Power plant technology design activity.
  Power plant design activity.

 Machining activity.
  Manufacturing of power equipment machinery.

Step 3
Electrical and control engineering activity in power plants and nuclear power plants:
 Electrical and control engineering projects, as well as reconstruction and maintenance work, are
planned, coordinated, and executed.
 Provision for the construction's technological, technical, installation, and commissioning
documentation.

Step 4
Mechanical fitting and maintenance activity in power plants and nuclear power plants:
 During the manufacturing of steelwork, assembling and welding are needed.
 Pipelines, pipe supports, shut-off, throttle, regulator, and protective valves and fittings all need
mechanical maintenance and repair.
 Pulse tubes and valves belonging to transmitters are maintained and repaired.
 Mechanical equipment maintenance, installation, reconstruction, revamping, and demolition.
 Execution of all types of preparatory and engineering activities required for successful
execution.
Step 5
Power plant technology design activity:
 Maintenance technologies and quality management plans are being prepared.
 Manufacturing, welding, and heat treatment technologies preparation

Step 6
Machining activity:
 Pipe fittings, reducers, flanges, and threaded connectors.
 Pressure vessel components.
 Anti-corrosive binding materials and high-strength carbon steel

Step 7
Manufacturing of power equipment machinery:
 Pressure vessels, heat exchangers, columns, tanks, and other pressure devices for the
mechanical industry are designed, manufactured, delivered, and recorded.
 Power plant machinery, boilers, and their parts are designed, manufactured, delivered, and
recorded.

Step 8
The control activities of the installation of a power plant are electrical and control engineering
activity in power plants and nuclear power plants, mechanical fitting and maintenance activity
in power plants and nuclear power plants, power plant technology design activity, power plant
design activity, machining activity, manufacturing of power equipment machinery.

        4. the manufacture of tricycles

Step 1

The goal of communitarian fabricating is making the cooperative energy impact from the joint effort of
assembling assets. The joint efforts are made among savvy machines; however the cooperation could be
acknowledged among machines and person, just as a shared robot (Cobot) has a place with the last
mentioned.

Step 2

Control activities:

Control activities are the methodology and strategies that guarantee to diminish hazards recognized
during the danger evaluation measure. These exercises are taken to limit chances. At the point when the
appraisal distinguishes a huge danger to the accomplishment of an unbiased, a control action is resolved
and carried out.

Control activities will include: 

The innovation ought to be painstakingly picked for the development of a tricycle to guarantee the
nature of the whole tricycle. 
There ought to be legitimate oversight of development to keep away from illicit activities. 

There ought to be legitimate administration of materials and development units ought to rigorously
forestall unfit materials.

You might also like