Scribd Logo
Upload

Welcome to Scribd!

  • 410 views

    Coolmay 3G PLC, All-In-One USB Programming Port Drive Installation Steps in WIN7&WIN10

    Uploaded by

    Carlos Fernandez
    1. The document provides steps to manually install the Mini type B USB programming port driver for Coolmay 3G PLC/PLC All-in-one devices in Windows 7 and Windows 10. 2. In Windows 10, users must first close the digital signature to allow installation of unsigned drivers. This involves several settings menu selections and a restart. 3. After closing the digital signature, users unzip the driver package, copy a file to the PLC programming software folder, connect the USB cable, and manually select the driver file location during the Windows installation process.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Coolmay 3G PLC, All-In-One USB Programming Port Drive Installation Steps in WIN7&WIN10

    Uploaded by

    Carlos Fernandez
    410 views12 pages
    1. The document provides steps to manually install the Mini type B USB programming port driver for Coolmay 3G PLC/PLC All-in-one devices in Windows 7 and Windows 10. 2. In Windows 10, users must first close the digital signature to allow installation of unsigned drivers. This involves several settings menu selections and a restart. 3. After closing the digital signature, users unzip the driver package, copy a file to the PLC programming software folder, connect the USB cable, and manually select the driver file location during the Windows installation process.

    Original Description:

    DRIVE

    Original Title

    Coolmay 3G PLC, all-in-one USB programming port drive installation steps in WIN7&WIN10

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document provides steps to manually install the Mini type B USB programming port driver for Coolmay 3G PLC/PLC All-in-one devices in Windows 7 and Windows 10. 2. In Windows 10, users must first close the digital signature to allow installation of unsigned drivers. This involves several settings menu selections and a restart. 3. After closing the digital signature, users unzip the driver package, copy a file to the PLC programming software folder, connect the USB cable, and manually select the driver file location during the Windows installation process.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    410 views12 pages

    Coolmay 3G PLC, All-In-One USB Programming Port Drive Installation Steps in WIN7&WIN10

    Uploaded by

    Carlos Fernandez
    1. The document provides steps to manually install the Mini type B USB programming port driver for Coolmay 3G PLC/PLC All-in-one devices in Windows 7 and Windows 10. 2. In Windows 10, users must first close the digital signature to allow installation of unsigned drivers. This involves several settings menu selections and a restart. 3. After closing the digital signature, users unzip the driver package, copy a file to the PLC programming software folder, connect the USB cable, and manually select the driver file location during the Windows installation process.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 12
    At a glance
    Powered by AI
    The document outlines the steps to install a USB programming port driver for Coolmay PLC devices in Windows 7 and Windows 10. It describes disabling digital signatures in Windows 10, manually installing the USB driver, and checking the device manager after installation.

    You need to restart the computer in advanced startup mode, select startup settings, and press F7 or the 7 key on the keyboard to disable driver enforcement signature.

    You need to copy an .inf file to the USB driver folder, connect the USB cable, update the driver in device manager by browsing to the USB driver folder, and select the .inf file.

    Coolmay 3G

    PLC/PLC All-in-one
    USB programming port
    drive installation steps in
    WIN7&WIN10

    Shenzhen Coolmay Technology Co.,Ltd

    V12.15

    1 www.coolmay.com
    Note: Please colse the digital signature first when you using os WIN10, then
    manually install Mini type B USB programming port drive.

    The steps of closing digital signature in WIN10 are as below:


    ---After setting third step, you will enter the restart setting interface. It is
    recommended to take photos from step from 4-8 or remember the setting
    method before you operation next.

    1、Click the Start menu button --- click on Settings

    2 www.coolmay.com
    2 、 Enter the settings window ， click update and security （ windows
    update、recovery、backup）；

    3、Click recovery，then click "Start Now" in the advanced startup, after


    rebooting, you will enter the following window.

    3 www.coolmay.com
    4、After rebooting, pop up the first window as below and click "Troubleshoot"

    4 www.coolmay.com
    5、Then enter the second window, click advanced options

    6、Then click ‘Startup Settings’

    5 www.coolmay.com
    7、After entering the startup settings window, you need to click "Restart" to
    activate the software;

    8、After restarting the startup settings interface, press the number key 7 or F7
    on the keyboard to disable the driver enforcement signature.

    6 www.coolmay.com
    After drive enforcement signature prohibited and computer restarts, then
    manually boot the Mini B type USB programming port driver

    The Mini type B USB programming port WIN7 system and WIN10 system
    (execute after digital signature have been closed) drive need to be manually
    installed, the steps are as follows: unzip《3G series PLC&PLC all-in-one USB
    programming port drive_WIN7 os 》 ， cover file of ECUsbd.inf as below to
    C:\MELSEC\Easysocket\USBDrivers （ The path can be found according to
    the installation path of the PLC programming software).

    1. After the operation is completed, connect the USB programming cable

    to the computer and open the device manager. Unknown devices will
    appear in other devices. Right-click to update the driver software. The
    operation steps are as follows:

    7 www.coolmay.com
    8 www.coolmay.com
    9 www.coolmay.com
    In the above figure, the path of “browsing the driver files on the computer”
    should be corresponding to the USBDrivers in the PLC programming software
    installation path (the same as the coverage path of the first step ECUsbd.inf
    file), as shown below, click

    10 www.coolmay.com
    11 www.coolmay.com
    When the USB driver is successfully installed, one of the device
    manager's Universal Serial Bus controllers will be added, as shown below.

    After the installation finish, you can use the usb cable to download the
    PLC

    program.

    12 www.coolmay.com

    You might also like