Axially Split Volute Casing Pump

RDLO / RDLO V

Type Series Booklet

Legal information/Copyright
Type Series Booklet RDLO / RDLO V

All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
edited or processed for any other purpose, nor otherwise transmitted, published or made available to
a third party without the manufacturer's express written consent.

Subject to technical modification without prior notice.

© KSB Aktiengesellschaft, Frankenthal 02.12.2014

 Contents

Contents

Water Supply ..................................................................................................................................................... 4

Axially Split Volute Casing Pump ................................................................................................................................... 4
RDLO / RDLO V .......................................................................................................................................................... 4
Main applications ................................................................................................................................................ 4
Fluids handled ...................................................................................................................................................... 4
Operating data .................................................................................................................................................... 4
Designation .......................................................................................................................................................... 4
Design details ....................................................................................................................................................... 5
Materials .............................................................................................................................................................. 6
Coating and preservation ................................................................................................................................... 7
Product benefits .................................................................................................................................................. 8
Acceptance tests .................................................................................................................................................. 8
Selection information .......................................................................................................................................... 9
Solids content ................................................................................................................................................. 9
Directions of rotation and flow .................................................................................................................... 9
Overview of product features ........................................................................................................................... 10
Specifications required for enquiries/orders ................................................................................................... 12
Selection charts ................................................................................................................................................. 13
RDLO / RDLO V, n = 1480 rpm ..................................................................................................................... 13
RDLO / RDLO V, n = 985 rpm ....................................................................................................................... 13
RDLO / RDLO V, n = 740 rpm ....................................................................................................................... 14
RDLO / RDLO V, n = 1780 rpm ..................................................................................................................... 14
RDLO / RDLO V, n = 1180 rpm ..................................................................................................................... 15
RDLO / RDLO V, n = 890 rpm ....................................................................................................................... 15
RDLO / RDLO V, n = 715 rpm ....................................................................................................................... 16
Installation types ............................................................................................................................................... 17
Fig.0 .............................................................................................................................................................. 17
2E .................................................................................................................................................................. 17
3E .................................................................................................................................................................. 17
4E .................................................................................................................................................................. 18
DJ .................................................................................................................................................................. 18
DP .................................................................................................................................................................. 18
Scope of supply .................................................................................................................................................. 19
General assembly drawings with list of components ...................................................................................... 20
Horizontal installation (example) ............................................................................................................... 20
Vertical installation (example) .................................................................................................................... 22

3
 Water Supply
Axially Split Volute Casing Pump

Water Supply ▪ Service water

▪ Fire-fighting water
▪ Cooling water
Axially Split Volute Casing Pump
▪ Condensate
▪ Heating water

RDLO / RDLO V ▪ Drinking water

Operating data
Operating properties
Characteristic Value
Sizes DN [mm] 350-700
DN [″] 14-28
Flow rate1) Q [m3/h] ≤ 10000
Q [US.gpm] ≤ 44030
Head1)2) H [m] ≤ 240
H [ft] ≤ 787
Operating pressure2) p [bar] ≤ 25
p [psi] ≤ 363
Fluid temperature3) T [°C] ≤ 80
T [°F] ≤ 176

Designation
Example: RDLO V 350-690 A GB P M
Key to the designation
Code Description
Main applications RDLO Type series
▪ Water supply systems V Design
4) Horizontal installation
▪ Desalination plants
V Vertical installation
▪ Pressure boosting 350 Nominal discharge nozzle diameter [mm]
▪ Water transport 700 Nominal impeller diameter [mm]
▪ Service and cooling water for power stations and industry A Impeller type
A, B
▪ Irrigation and drainage pumping stations
GB Material variant (⇨ Page 6)
▪ Fire-fighting systems GB Grey cast iron / bronze
▪ Shipbuilding GC Grey cast iron / chrome steel
SB Nodular cast iron / bronze
▪ District heating and cooling systems
SC Nodular cast iron / chrome steel
DD35 Duplex stainless steel / duplex stainless
Fluids handled steel
P Shaft seal
RDLO / RDLO V pumps are designed for pumping water and P Gland packing
other fluids with a low solids content. The pumps are very
G Mechanical seal
versatile and can be used for the following fluids, for example:
M Bearing lubrication
▪ Brackish water F Grease
▪ River, lake and groundwater M Product-lubricated
▪ Stormwater O Oil lubrication

1) Higher flow rates or heads on request.

2) Depending on the material and size
3) Fluid temperatures of up to 140 °C [284 °F] on request.
4) Blank

4 RDLO / RDLO V
 Water Supply
Axially Split Volute Casing Pump

Design details ▪ Completely dry shaft

Design ▪ Shaft protecting sleeves in the seal area
▪ Volute casing pump Shaft seal
▪ Horizontal/vertical installation ▪ Gland packing
▪ Single-stage ▪ Balanced mechanical seal
▪ Nominal discharge nozzle diameters: 350 mm ‒ 700 mm Bearings
[14" ‒ 28"] For horizontal installation:
Pump casing ▪ Grease-packed rolling element bearings
▪ Axially split volute casing ▪ Oil-lubricated rolling element bearings
▪ Volute casing with integrally cast pump feet For vertical installation:
▪ Replaceable casing wear rings ▪ Grease-packed rolling element bearings
▪ Mating dimensions to EN or ASME ▪ Bottom: product-lubricated rubber plain bearing /
Impeller type Top: grease-packed rolling element bearing
▪ Double-entry radial impeller5)
Pump shaft
Variants with rolling element bearing:

5) Optionally with impeller wear rings

RDLO / RDLO V 5
 Water Supply
Axially Split Volute Casing Pump

Materials
Overview of material variants
Part No. Description Material variant
GB GC SB SC DD356)
All pump sets
102 Volute casing Grey cast iron Grey cast iron Nodular cast iron Nodular cast iron Duplex stainless steel
211 Pump shaft Stainless steel Stainless steel Stainless steel Stainless steel Duplex stainless steel
234 Impeller Bronze Stainless steel Bronze Stainless steel Duplex stainless steel
350.01 Bearing housing Grey cast iron Grey cast iron Grey cast iron Grey cast iron Grey cast iron
360.01 Bearing cover Steel Steel Steel Steel Steel
441 Shaft seal housing Grey cast iron Grey cast iron Grey cast iron Grey cast iron Duplex stainless steel
502 Casing wear ring Bronze Stainless steel Bronze Stainless steel Duplex stainless steel
503 Impeller wear ring Bronze Stainless steel Bronze Stainless steel Duplex stainless steel
(optional)
525.01 Spacer sleeve Bronze Bronze Bronze Bronze Duplex stainless steel
For pump sets with ball bearings on both sides only
350.02 Bearing housing Grey cast iron Grey cast iron Grey cast iron Grey cast iron Grey cast iron
360.02 Bearing cover Unalloyed steel7) Unalloyed steel7) Unalloyed steel7) Unalloyed steel7) Unalloyed steel7)
525.03 Spacer sleeve Bronze Bronze Bronze Bronze Duplex stainless steel
For pump sets with product-lubricated plain bearing only
524.03 Shaft protecting sleeve Stainless steel Stainless steel Stainless steel Stainless steel -
525.02 Spacer sleeve Bronze Bronze Bronze Bronze -
525.04 Spacer sleeve Bronze Bronze Bronze Bronze -
545 Bearing bush Bronze/rubber Bronze/rubber Bronze/rubber Bronze/rubber -
550.03 Disc Stainless steel Stainless steel Stainless steel Stainless steel -
For pump sets with gland packing only
452 Gland follower Nodular cast iron Nodular cast iron Nodular cast iron Nodular cast iron -
457.01 Neck ring (p < 7 bar Bronze Bronze Bronze Bronze -
[99.5 psi])
457.03 Neck ring (p ≥ 7 bar Bronze Bronze Bronze Bronze -
[99.5 psi])
458 Lantern ring Bronze Bronze Bronze Bronze -
461 Packing ring Ramie fibre Ramie fibre Ramie fibre Ramie fibre -
PTFE- PTFE- PTFE- PTFE-
impregnated impregnated impregnated impregnated
524.01 Shaft protecting sleeve Stainless steel Stainless steel Stainless steel Stainless steel -
For pump sets with mechanical seal only
433 Balanced mechanical Carbon/silicon Carbon/silicon Carbon/silicon Carbon/silicon Carbon/silicon
seal carbide carbide carbide carbide carbide
457.02 Neck ring Bronze Bronze Bronze Bronze Duplex stainless steel
471 Seal cover Stainless steel Stainless steel Stainless steel Stainless steel Duplex stainless steel
524.02 Shaft protecting sleeve Bronze Bronze Bronze Bronze Duplex stainless steel

6) PREN ≤ 35 only applies to the main cast components (volute casing, impeller, shaft seal housing). Duplex stainless steels
with special PREN values available on request.
7) For RDLO V only

6 RDLO / RDLO V
 Water Supply
Axially Split Volute Casing Pump

Coating and preservation

Coating for indoor installation
Coating Material variant Casing Base frame
type GB GC SB SC DD35 Exterior Interior Bearing housing
A18) ✘ ✘ ✘ ✘ – Epoxy resin base Epoxy resin base Epoxy resin base Epoxy resin base
paint, primer, paint, colour RAL paint, colour RAL
colour RAL 5002 colour at our 5002 (ultramarine 5002 (ultramarine
(ultramarine blue)9) discretion blue)9) blue)9)
A1- ✘ ✘ ✘ ✘ – Epoxy resin base Epoxy resin base Epoxy resin base Epoxy resin base
E8)10) paint, paint, paint, paint, colour RAL
colour RAL 5002 colour RAL 5015 (sky colour RAL 5002 5002 (ultramarine
(ultramarine blue)9) blue)11) (ultramarine blue)9) blue)9)
B1-E8) – – – – ✘ Epoxy resin base None; sand-blasted Epoxy resin base Epoxy resin base
paint, SA 2 ½ paint, paint, colour RAL
colour RAL 5002 colour RAL 5002 5002 (ultramarine
(ultramarine blue)9) (ultramarine blue)9) blue)9)

Coating for outdoor installation

Coating Material variant Casing Base frame
type GB GC SB SC DD35 Exterior Interior Bearing housing
A2 ✘ ✘ ✘ ✘ – Polyurethane base Epoxy resin base Polyurethane base Polyurethane base
paint, primer, paint, paint,
colour RAL 5002 colour at our colour RAL 5002 colour RAL 5002
(ultramarine blue)12) discretion (ultramarine blue)12) (ultramarine blue)12)
A2- ✘ ✘ ✘ ✘ – Polyurethane base Epoxy resin base Polyurethane base Polyurethane base
E8)10) paint, paint, paint, paint,
colour RAL 5002 colour RAL 5015 (sky colour RAL 5002 colour RAL 5002
(ultramarine blue)12) blue)11) (ultramarine blue)12) (ultramarine blue)12)
B2-E8) – – – – ✘ Polyurethane base None; sand-blasted Polyurethane base Polyurethane base
paint, SA 2 ½ paint, paint,
colour RAL 5002 colour RAL 5002 colour RAL 5002
(ultramarine blue)12) (ultramarine blue)12) (ultramarine blue)12)

8) Only permissible for fluid temperatures ≤ 80 °C [176 °F]

9) For indoor use in industry and in a marine atmosphere; other colours only in coating variants A2 or B2 and on request.
10) Extra charge
11) Approved for drinking water (KTW, DVGW, ACS). The impeller and rotor components are generally not coated. No other
colours available. Max. permissible temperature for drinking water approved coating = 60 °C [140 °F]. Only approved for
drinking water up to 25 °C [77 °F] max.
12) For indoor and outdoor use in industry and in a marine atmosphere; other colours on request.

RDLO / RDLO V 7
 Water Supply
Axially Split Volute Casing Pump

Product benefits – Shaft sealed by gland packing or mechanical seals

▪ Low maintenance costs: – Various horizontal and vertical installation options
– Fast and easy to install thanks to self-centring – Flanges to DIN or ASME
components (upper casing part, rotor, casing cover) ▪ Excellent efficiencies and NPSH values:
– Materials resistant to corrosion and abrasion – Computer-optimised impellers
– Smooth operation with low vibration levels – Large impeller inlet diameters for optimum suction
– Replacement and spare parts fit several pump sizes behaviour
▪ Long service life: – Cost-effective replacing of casing and impeller wear
rings
– Sealed and dry shaft
– Vortex-free intake elbow with low energy losses
– Short bearing distances and a short shaft
– Impeller trimmed to match the specified duty point
– Protected rolling element bearings greased for life
– Several hydraulic systems per pump size
– Optional impeller wear rings
– Replaceable shaft protecting sleeve
▪ High operating reliability: Acceptance tests
– Rigid shaft without threads between the bearings ▪ Functional and acceptance tests
– Generously sized bearings (Lh10 = 100,000 hours) – For information on acceptance tests and inspections
refer to the QCPs (see KSB Standard ZN56555-2A
– Reliable sealing thanks to solid casing split flange ZN56555-2B ZN56555-2C)
– Double-entry impeller for axial thrust balancing ▪ Quality assurance system
– Double volute design – DIN ISO 9001 / EN 29001
▪ High flexibility:
– Drive can be positioned to the left or right of the
pump

8 RDLO / RDLO V
 Water Supply
Axially Split Volute Casing Pump

Selection information

Solids content
Solids content by shaft seal and material variant in [ppm] or [mg/l]
Shaft seal Material variant
Max. permissible solids content for variants with Max. permissible solids content for variants with
barrier and flushing water line without cyclone barrier and flushing water line with cyclone
separator separator13)
GB/GC SB/SC DD35 GB/GC SB/SC DD35
Gland packing 50 50 50 100 100 100
Balanced mechanical seal 50 50 50 100 100 100

Directions of rotation and flow

Directions of rotation and flow
RDLO: variant for horizontal installation RDLO V: variant for vertical installation
Direction of rotation, seen from the drive end
"Right" = clockwise "Left" = anti-clockwise "Right" = clockwise "Left" = anti-clockwise

13) Higher solids contents on request

RDLO / RDLO V 9
 Water Supply
Axially Split Volute Casing Pump

Overview of product features

General overview (valid for standard design)14)
Features Material variant Installation type
RDLO RDLO V
GB GC SB SC DD35 Fig. 0 2E 3E 4E DP DJ
Direction of rotation
"Right": clockwise ● ● ● ● ● ● ● ● ● ● ●
"Left": anti-clockwise ● ● ● ● ● ● ● ● ● ● ●
Flange
Drilled to DIN EN 1092 – flat face (type A) ● ● ● ● ● ● ● ● ● ● ●
Drilled to DIN EN 1092 – raised face (type B) □ □ □ □ □ □ □ □ □ □ □
Drilled to ASME B16 – flat face (type FF) ● ● ● ● ● ● ● ● ● ● ●
Drilled to ASME B16 – raised face (type RF) □ □ □ □ □ □ □ □ □ □ □
Special flange ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭
Bearings
Grease-lubricated rolling element bearings at the drive and non-drive ends ● ● ● ● ● ● ● ● ● ● ●
Grease-lubricated rolling element bearing at the drive end, and product- ● ● ● ● - - - - - ● ●
lubricated plain bearing at the non-drive end
Oil-lubricated rolling element bearings at the drive and non-drive ends ● ● ● ● ● ● ● ● ● - -
Wear rings
Casing with wear rings / impeller without wear rings ● ● ● ● ● ● ● ● ● ● ●
Casing with wear rings / impeller with wear rings ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Shaft seal
Gland packing ● ● ● ● - ● ● ● ● ● ●
Single mechanical seal (unbalanced) - - - - - - - - - - -
Single mechanical seal (balanced) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Special shaft seal (make/design different from KSB specifications) ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭
Piping
Barrier fluid / flushing water line made of flexible PTFE (malleable cast iron) ● ● ● ● ● ● ● ● ● ● ●
Barrier fluid / flushing water line made of flexible PTFE (stainless steel) ○ ○ ○ ○ - ○ ○ ○ ○ ○ ○
Barrier fluid / flushing water line made of flexible PTFE (duplex) - - - - ○ ○ ○ ○ ○ ○ ○
Barrier fluid / flushing water, rigid pipe (stainless steel) ○ ○ ○ ○ - ○ ○ ○ ○ ○ ○
Barrier fluid / flushing water, rigid pipe (duplex/Monel) - - - - ○ ○ ○ ○ ○ ○ ○
Special piping (to customer requirements) ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭
Coating
Coating for indoor installation (KSB blue / RAL 5002) ● ● ● ● ● ● ● ● ● ● ●
Coating for outdoor installation (KSB blue / RAL 5002) □ □ □ □ □ □ □ □ □ □ □
Coating approved for drinking water15) □ □ □ □ □ □ □ □ □ □ □
Coating for outdoor installation (special colour) □ □ □ □ □ □ □ □ □ □ □
Special coating (customised coating system/composition) ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭
Accessories
Cyclone separator ○ ○ ○ ○ - ○ ○ ○ ○ ○ ○
Manually actuated vent valve (without additional piping)16) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Automatically actuated vent valve (without additional piping)16) ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭
Manually actuated drain valve (without additional piping)16) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
PumpMeter ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭ ￭
Pt100 temperature sensor16)17) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Limit switch for Pt10016)17) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Transmitter for Pt10016)17) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Measuring nipple (SPM) for manual vibration measurement16)17) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Vibration sensor including vibration monitoring device16)17) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Pressure gauge nominal diameter 100, including valves (without ○ ○ ○ ○ - ○ ○ ○ ○ ○ ○
attenuation)16)17)
Pressure gauge nominal diameter 100, including valves (with ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
attenuation)16)17)

14) Max. fluid temperature 80 °C [176 °F]

15) Available for selection for fluid temperatures ≤ 60 °C
16) If no valve or measuring equipment is selected as accessory the corresponding connection is closed with a plug.
17) The measuring equipment is supplied with the pump but not fitted. It has to be connected at the time of commissioning of
the pump. This connection is closed with a plug when the pump is supplied.

10 RDLO / RDLO V
 Water Supply
Axially Split Volute Casing Pump

Features Material variant Installation type

RDLO RDLO V
GB GC SB SC DD35 Fig. 0 2E 3E 4E DP DJ
Pressure gauge nominal diameter 160, including valves (with ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
attenuation)16)17)
Installation parts
Without installation parts ● ● ● ● ● ● - - - - -
Base frame for pump and motor, including foundation bolts □ □ □ □ □ - □ □ □ - -
Special base frame for pump and motor, including foundation bolts ￭ ￭ ￭ ￭ ￭ - ￭ ￭ ￭ - -
Pump foundation (foot), including foundation blocks and drive lantern ￭ ￭ ￭ ￭ ￭ - - - - ￭ -
Special design of pump foundation (foot), including foundation blocks and ￭ ￭ ￭ ￭ ￭ - - - - ￭ -
drive lantern
Pump foundation (foot), including foundation blocks ￭ ￭ ￭ ￭ ￭ - - - - - ￭
Pump foundation (foot), including foundation blocks and motor support ￭ ￭ ￭ ￭ ￭ - - - - - ￭
frame with foundation rails and foundation bolts
Coupling
Without coupling and coupling guard ● ● ● ● ● ● ● ● ● - ●
Torsionally flexible 3-piece jaw coupling (coupling guard not tread-proof) □ □ □ □ □ □ □ □ □ - -
Torsionally flexible 3-piece jaw coupling (coupling guard tread-proof) □ □ □ □ □ - □ □ □ - -
Torsion-resistant flexible disc coupling with spacer (coupling guard not □ □ □ □ □ □ □ □ □ ￭ -
tread-proof)
Torsion-resistant flexible disc coupling with spacer (coupling guard tread- □ □ □ □ □ □ □ □ □ - -
proof)
Universal joint shaft / coupling with spacer (with/without intermediate ￭ ￭ ￭ ￭ ￭ - - - - - ￭
bearing)
Motor
Without motor ● ● ● ● ● ● □ □ □ ￭ ￭
Low-voltage motor to KSB standard18)19) ● ● ● ● ● - ● ● ● ￭ ●
Low-voltage motor different from KSB standard18)19) ￭ ￭ ￭ ￭ ￭ - ￭ ￭ ￭ ￭ ￭
Special motor (high-voltage/NEMA/with frequency inverter/etc.)18)19) ￭ ￭ ￭ ￭ ￭ - ￭ ￭ ￭ ￭ ￭
Acceptance tests20)
Hydraulic acceptance test to KSB standard DIN ISO 9906 - Non-witnessed ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2B (equivalent to ANSI HI 14.6-2011/2B) Witnessed □ □ □ □ □ □ □ □ □ □ □
Hydraulic acceptance test to DIN ISO 9906 - 1B (equivalent Non-witnessed □ □ □ □ □ □ □ □ □ □ □
to ANSI HI 14.6-2011/1B) Witnessed □ □ □ □ □ □ □ □ □ □ □
Hydraulic acceptance test to DIN ISO 9906 - 1U (equivalent Non-witnessed □ □ □ □ □ □ □ □ □ □ □
to ANSI HI 14.6-2011/1U or Hydraulic Institute A) Witnessed □ □ □ □ □ □ □ □ □ □ □
NPSH test (to DIN ISO 9906 or Hydraulic Institute) Non-witnessed □ □ □ □ □ □ □ □ □ □ □
Witnessed □ □ □ □ □ □ □ □ □ □ □
Sound measurement Non-witnessed □ □ □ □ □ □ □ □ □ □ □
Witnessed □ □ □ □ □ □ □ □ □ □ □
Vibration test Non-witnessed □ □ □ □ □ □ □ □ □ □ □
Witnessed □ □ □ □ □ □ □ □ □ □ □
Bearing temperature measurement Non-witnessed □ □ □ □ □ □ □ □ □ □ □
Witnessed □ □ □ □ □ □ □ □ □ □ □
Visual inspection after test run (strip test) Non-witnessed □ □ □ □ □ □ □ □ □ □ □
Witnessed □ □ □ □ □ □ □ □ □ □ □
Hydrostatic test Non-witnessed □ □ □ □ □ □ □ □ □ □ □
Witnessed □ □ □ □ □ □ □ □ □ □ □
Impeller balancing test Non-witnessed □ □ □ □ □ □ □ □ □ □ □
Witnessed □ □ □ □ □ □ □ □ □ □ □
Coating inspection Non-witnessed □ □ □ □ □ □ □ □ □ □ □
Witnessed □ □ □ □ □ □ □ □ □ □ □
Dimensional inspection Non-witnessed □ □ □ □ □ □ □ □ □ □ □
Witnessed □ □ □ □ □ □ □ □ □ □ □
Replacement and spare parts
Replacement and spare parts for 2 years of operation □ □ □ □ □ □ □ □ □ □ □

18) The motor can be supplied by the customer and mounted at the site of installation. Motors supplied by KSB can also be
mounted by the customer.
19) On request, customer-supplied motors can be mounted by a KSB service centre.
20) Further information see ZN 56555/2A, ZN 56555/2B, ZN 56555/2C.

RDLO / RDLO V 11
 Water Supply
Axially Split Volute Casing Pump

Key to the symbols ▪ Solids content

Symbol Description ▪ Direction of rotation / motor position
● Standard design ▪ Accessories required
○ Standard variant21) ▪ Special inspections and acceptance tests
□ Special design21)
▪ Quantity and language of operating manuals
- Selection unavailable
Drive (selected by KSB):
▪ Type of construction
Specifications required for enquiries/orders
▪ Enclosure
Pump:
▪ Voltage, frequency, starting method
▪ Designation of the pump
▪ Ambient temperature
▪ Maximum and minimum inlet pressure
▪ Thermal class
▪ Flow rate Q, head Htotal
▪ Accessories required
▪ Flange design
Drive (selected by customer):
▪ Shaft seal
▪ Binding data sheet with motor dimensions and effective
▪ Type and temperature of the fluid pumped speed

21) A surcharge and longer delivery times apply to standard variants and special designs.

12 RDLO / RDLO V
 Water Supply
Axially Split Volute Casing Pump

Selection charts

RDLO / RDLO V, n = 1480 rpm

3000 4000 5000 Q [US.gpm] 10000 20000 30000 40000 50000

2000 3000 4000 5000 Q [IM.gpm] 10000 20000 30000 40000

300

200

Ⓑ Ⓐ Ⓐ 500

350-690 Ⓑ
400-705
Ⓐ
400
400-665
100 Ⓐ Ⓐ
350-575
Ⓑ Ⓑ 300
400-580

Ⓐ
Ⓑ 200

50 400-525

40

30 100

H [ft]
20

50

40

10
30

H
[m]
20

5
500 Q [m³/h] 1000 2000 3000 4000 5000 10000 12000

200 300 400 500 Q [l/s] 1000 2000 3000

Ⓐ Impeller type A
Ⓑ Impeller type B

RDLO / RDLO V, n = 985 rpm

3000 4000 5000 US.gpm 10000 20000 30000 40000 50000

2000 3000 4000 5000 IM.gpm 10000 20000 30000 40000

300

200

Ⓐ Ⓑ Ⓐ Ⓐ 500
Ⓑ 500-1015 500-1035
400-935 Ⓐ 600-1075
Ⓑ 400
700-980 Ⓐ
100
Ⓐ ⒷⒶ
Ⓑ Ⓐ 300
500-835 500-860
600-885

Ⓑ Ⓐ Ⓐ
Ⓐ Ⓐ 200
350-690 400-705
Ⓐ
50
400-665
Ⓑ 500-685 Ⓑ 600-705
Ⓐ Ⓐ
40 Ⓑ 400-580
Ⓑ Ⓐ
350-575
500-585 Ⓑ Ⓐ
30 Ⓐ 100
Ⓑ 600-600

400-525 ft
20

50

40

10
30

H
[m]
20

5
500 Q[m³/h] 1000 2000 3000 4000 5000 10000 12000

200 300 400 500 l/s 1000 2000 3000

Ⓐ Impeller type A
Ⓑ Impeller type B

RDLO / RDLO V 13
 Water Supply
Axially Split Volute Casing Pump

RDLO / RDLO V, n = 740 rpm

3000 4000 5000 US.gpm 10000 20000 30000 40000 50000

2000 3000 4000 5000 IM.gpm 10000 20000 30000 40000

300

200

500

400

100

Ⓑ Ⓐ Ⓑ Ⓐ Ⓐ 300
600-1075
500-1015 500-1035
400-935Ⓐ Ⓑ
Ⓐ
ⒶⒶ
200
Ⓐ 700-980
50 Ⓑ Ⓑ 500-860
500-835 600-885
40
Ⓑ Ⓐ Ⓐ
Ⓐ Ⓐ
350-690 400-705
Ⓐ
30
400-665 Ⓑ 500-685 Ⓑ 600-705
100

Ⓐ Ⓐ
Ⓑ Ⓑ
Ⓑ Ⓐ ft
20 350-575 400-580
Ⓑ Ⓐ
500-585
Ⓐ
Ⓑ 600-600 50

400-525
40

10
30

H
[m]
20

5
500 Q[m³/h] 1000 2000 3000 4000 5000 10000 12000

200 300 400 500 l/s 1000 2000 3000

Ⓐ Impeller type A
Ⓑ Impeller type B

RDLO / RDLO V, n = 1780 rpm

3000 4000 5000 Q [US.gpm] 10000 20000 30000 40000 50000

2000 3000 4000 5000 Q [IM.gpm] 10000 20000 30000 40000

300

200
Ⓑ
350-690

Ⓐ 500

Ⓑ 400
350-575
100
300

200

50

40

30 100

H [ft]
20

50

40

10
30

H
[m]
20

5
500 Q [m³/h] 1000 2000 3000 4000 5000 10000 12000

200 300 400 500 Q [l/s] 1000 2000 3000

Ⓐ Impeller type A
Ⓑ Impeller type B

14 RDLO / RDLO V
 Water Supply
Axially Split Volute Casing Pump

RDLO / RDLO V, n = 1180 rpm

3000 4000 5000 [US.gpm] 10000 20000 30000 40000 50000

2000 3000 4000 5000 [IM.gpm] 10000 20000 30000 40000

300

200

ⒶⒶ
500

Ⓑ Ⓐ Ⓑ500-860 600-885 400

500-835

Ⓐ
Ⓑ 350Ⓐ
100

-690
400-705
Ⓑ Ⓐ Ⓐ Ⓐ 300

400-665 Ⓑ 500-685
Ⓑ
Ⓐ Ⓐ 600-705

Ⓑ
200
Ⓑ 400-580
Ⓑ Ⓐ
50 350-575
500-585 Ⓑ Ⓐ
Ⓐ
40
Ⓑ 600-600
400-525
30 100

H [ft]
20

50

40

10
30

H
[m]
20

5
500 Q[m³/h] 1000 2000 3000 4000 5000 10000 12000

200 300 400 500 Q [l/s] 1000 2000 3000

Ⓐ Impeller type A
Ⓑ Impeller type B

RDLO / RDLO V, n = 890 rpm

3000 4000 5000 US.gpm 10000 20000 30000 40000 50000

2000 3000 4000 5000 IM.gpm 10000 20000 30000 40000

300

200

500

Ⓐ Ⓑ Ⓐ Ⓐ
Ⓑ 500-1015 500-1035
400

100 400-935 Ⓐ 600-1075

Ⓑ
Ⓐ 300

Ⓐ ⒶⒶ 700-980
Ⓑ Ⓑ
500-835 500-860 600-885
200
Ⓐ Ⓐ
50
350-690
Ⓑ 400-705 Ⓐ Ⓐ
Ⓐ
40
400-665 Ⓑ 500-685
Ⓑ 600-705
Ⓐ Ⓐ
Ⓑ Ⓑ
350-575 Ⓑ 100
30 400-580
Ⓐ Ⓐ
Ⓐ 500-585
Ⓑ 600-600 ft
20
400-525

50

40

10
30

H
[m]
20

5
500 Q[m³/h] 1000 2000 3000 4000 5000 10000 12000

200 300 400 500 l/s 1000 2000 3000

Ⓐ Impeller type A
Ⓑ Impeller type B

RDLO / RDLO V 15
 Water Supply
Axially Split Volute Casing Pump

RDLO / RDLO V, n = 715 rpm

3000 4000 5000 US.gpm 10000 20000 30000 40000 50000

2000 3000 4000 5000 IM.gpm 10000 20000 30000 40000

300

200

500

400

100
300

Ⓐ Ⓑ Ⓐ Ⓐ
Ⓑ 500-1015 500-1035
Ⓐ 600-1075
Ⓑ
400-935 Ⓐ 200
700-980
Ⓐ Ⓐ
50
Ⓑ Ⓑ 500-860
500-835
40

Ⓑ Ⓐ Ⓐ
400-705 Ⓐ Ⓐ
30 350-690 Ⓐ 100
Ⓑ
400-665 600-705
Ⓑ 500-685
Ⓐ Ⓐ
Ⓑ Ⓑ ft
20 350-575 Ⓑ Ⓐ
400-580
Ⓑ Ⓐ
500-585
Ⓐ
Ⓑ 600-600
50

400-525 40

10
30

H
[m]
20

5
500 Q[m³/h] 1000 2000 3000 4000 5000 10000 12000

200 300 400 500 l/s 1000 2000 3000

Ⓐ Impeller type A
Ⓑ Impeller type B

16 RDLO / RDLO V
 Water Supply
Axially Split Volute Casing Pump

Installation types ▪ Foundation rails for the pump, including foundation bolts
Coupling options:
▪ Torsionally flexible 3-piece jaw coupling
Fig.0
▪ Torsion-resistant flexible disc coupling with spacer
Coupling guard options:
▪ Light-duty design, not tread-proof
Delivery/transport:
▪ Pump and motor are supplied as separate units.

3E

Fig.0: Bare shaft pump

Options of installation parts:
▪ No optional equipment
Coupling options:
▪ Torsionally flexible 3-piece jaw coupling
▪ Torsion-resistant flexible disc coupling
Coupling guard options:
▪ Light-duty design, not tread-proof
Delivery/transport:
▪ Pump 3E: Pump and motor on a common base frame
Options of installation parts:
▪ Base frame for pump and motor, including foundation
2E bolts
▪ Special base frame for pump and motor, including
foundation bolts
Coupling options:
▪ Torsionally flexible 3-piece jaw coupling
▪ Torsion-resistant flexible disc coupling with spacer22)
Coupling guard options:
▪ Light-duty design, not tread-proof
▪ Heavy-duty design, tread-proof
Delivery/transport:
▪ Pump, motor and base frame are supplied as separate
2E: pump and motor on foundation rails units.
Options of installation parts:
▪ Foundation rails for the pump, including foundation bolts,
and foundation blocks for the motor

22) On request only

RDLO / RDLO V 17
 Water Supply
Axially Split Volute Casing Pump

4E Options of installation parts:

▪ Pump base frame (foot) including foundation bolts
▪ Pump base frame (foot) including foundation bolts, motor
support frame, foundation rails and foundation bolts23)
Coupling options:
▪ Universal joint shaft23)
▪ Coupling with spacer23)
Coupling guard options:
▪ Light-duty design, not tread-proof
Delivery / transport:
▪ Pump on corresponding pump base frame (foot), motor
and motor support frame are supplied a separate units.

4E: Pump and motor on separate base frames

Options of installation parts: DP
▪ Base frame for the pump and base frame for the motor,
including foundation bolts (without drip tray)
▪ Base frame for the pump, including foundation bolts
(without drip tray)
Coupling options:
▪ Torsionally flexible 3-piece jaw coupling
▪ Torsion-resistant flexible disc coupling with spacer
Coupling guard options:
▪ Light-duty design, not tread-proof
Delivery/transport:
▪ Pump, motor and base frame are supplied as separate
units.

DJ

DP: motor on separate drive lantern

Options of installation parts:
▪ Pump base frame (foot) including foundation bolts, and
drive lantern (including foundation rails and foundation
bolts)
Coupling options:
▪ Torsion-resistant flexible disc coupling with spacer
Coupling guard options:
▪ Light-duty design, not tread-proof
Delivery/transport:
▪ Pump with pump base frame (foot), motor and drive
lantern supplied as individual units

DJ: Pump and motor on separate levels

23) On request only

18 RDLO / RDLO V
 Water Supply
Axially Split Volute Casing Pump

Scope of supply Optional accessories:

Depending on the model, the following items are included in ▪ Vibration monitoring
the scope of supply: ▪ Pt100 temperature sensor
▪ Pump ▪ Constant level oiler
▪ Drive ▪ Pressure gauge
▪ Baseplate ▪ Measuring nipple for shock pulse measurement
▪ Coupling and coupling guard ▪ Cyclone
▪ Universal joint shaft
▪ Fasteners for pump and base frame

RDLO / RDLO V 19
 Water Supply
Axially Split Volute Casing Pump

General assembly drawings with list of components

Horizontal installation (example)

902.1
441 903.2* 502 234 525.3 452* 920.2 525.1 681
903.5 412.3 903.1 102 561.1 412.2 524.1* 903.5 350.1
901.4

636
720.3
73-1
904.1
507.2 550.11
920.5
350.2
145
904.3
920.5
940.1
914.1 211
920.4
930.1 940.3
940.4
411.2
950.2
932
520
550.1
903.4

550.1

321

360.1

561.2
940.2 458* 412.1 411.1 320
(940.7)

903.6 457.1* 461* 680.1 903.4

903.7 914.3
550.4
903.3 41-1
903.8

Horizontal installation: * = only for pump sets with gland packing for pump discharge pressure < 7 bar [99.5 psi]

901.3 441 457.3 903.2 461 452 524.1

940.5 433 471 550.5

441 457.2 524.2 412.7 902.1 562.3

920.2
Detailed view: mechanical seal Detailed view: gland packing, pump discharge pressure ≥ 7 bar
[99.5 psi]

20 RDLO / RDLO V
 Water Supply
Axially Split Volute Casing Pump

234 502 503 904.2 (550.7)

901.1 901.5 102

Detailed view: impeller with impeller wear ring Detailed view: screwed connection of the casing split flange

List of components
Part No. Description Part No. Description
102 Volute casing 520 Sleeve
145 Adapter 524.1/.2 Shaft protecting sleeve
211 Pump shaft 525.1/.3 Spacer sleeve
234 Impeller 550.1/.4/.5/.7/.11 Disc
320 Rolling element bearing 561.1/.2 Grooved pin
321 Radial ball bearing 562.3 Parallel pin
350.1/.2 Bearing housing 636 Lubricating nipple
360.1 Bearing cover 680.1 Guard
41-1 Sealing washer 681 Coupling guard
411.1/.2 Joint ring 73-1 Socket
412.1/.2/.3/.7 O-ring 720.3 Spacer
433 Mechanical seal 901.1/.3/.4/.5 Hexagon head bolt
441 Shaft seal housing 902.1 Stud
452 Gland follower 903.1/.2/.3/.4/.5/.6/.7/.8 Screw plug
457.1/.2/.3 Neck ring 904.1/.2/.3 Grub screw
458 Lantern ring 914.1/.3 Hexagon socket head cap
screw
461 Gland packing 920.2/.4/.5 Nut
471 Seal cover 930.1 Safety device
502 Casing wear ring 932 Circlip
503 Impeller wear ring 940.1/.2/.3/.4/.5/.7 Key
507.2 Thrower 950.2 Spring

RDLO / RDLO V 21
 Water Supply
Axially Split Volute Casing Pump

Vertical installation (example)

902.1
903.9 681 932 411.2 940.3 636 525.1 360.1 920.2

901.4 507.2 550.1 145 211 320 411.1 412.1 350.1 561.2
904.1
920.5
903.5 550.11
680.1
914.3
550.4 458*
41-1
461*
452*
457.1*
412.3
441
903.2*
561.1
524.1*
940.1
412.2 502
525.3
102
412.2

940.2
(940.7)

234

903.1
680.3
550.6
914.4
41-1
507.1
412.10
903.6 903.12
430 903.7

903.5
636
720.3
73-1
930.1
720.1 904.3 920.4 520 903.4 350.2 893.40
920.5 914.1
321 940.4 360.2 561.2
901.42 950.2 550.1 901.40
Vertical installation: * = only for pump sets with gland packing for pump discharge pressure < 7 bar [99.5 psi]

22 RDLO / RDLO V
 Water Supply
Axially Split Volute Casing Pump

562.3 524.1
901.3 902.1
550.5 920.2 452

461
903.2

471

412.7 457.3
433
524.2
441
940.5 457.2

441

Detailed view: mechanical seal Detailed view: gland packing, pump discharge pressure ≥ 7 bar
[99.5 psi]

904.2 (550.7)
901.1

503 901.5

(102)

(502)

(234)

Detailed view: impeller with impeller wear ring Detailed view: connecting elements of the volute casing

List of components
Part No. Description Part No. Description
102 Volute casing 520 Sleeve
145 Adapter 524.1/.2 Shaft protecting sleeve
211 Pump shaft 525.1/.3 Spacer sleeve
234 Impeller 550.1/.4/.5/.6/.7/.11 Disc
320 Rolling element bearing 561.1/.2 Grooved pin
321 Radial ball bearing 562.3 Parallel pin
350.1/.2 Bearing housing 636 Lubricating nipple
360.1/.2 Bearing cover 680.1/.3 Guard
41-1 Sealing washer 681 Coupling guard
411.1/.2 Joint ring 73-1 Socket
412.1/.2/.3/.7/.10 O-ring 720.1/.3 Spacer
430 Shaft seal 893.40 Soleplate
433 Mechanical seal 901.1/.3/.4/.5/.40/.42 Hexagon head bolt
441 Shaft seal housing 902.1 Stud
452 Gland follower 903.1/.2/.4/.5/.6/.7/.9/.12 Screw plug
457.1/.2/.3 Neck ring 904.1/.2/.3 Grub screw
458 Lantern ring 914.1/.3/.4 Hexagon socket head cap
screw
461 Gland packing 920.2/.4/.5 Nut
471 Seal cover 930.1 Safety device
502 Casing wear ring 932 Circlip
503 Impeller wear ring 940.1/.2/.3/.4/.5/.7 Key
507.1/.2 Thrower 950.2 Spring

RDLO / RDLO V 23
 02.12.2014
1387.5/05-EN

KSB Aktiengesellschaft
P.O. Box 200743 • 06008 Halle (Saale) • Turmstraße 92 • 06110 Halle (Germany)
Tel. +49 345 4826-0 • Fax +49 345 4826-4699
www.ksb.com