DSEControl®

DSEE050 SPECIFICATIONS

DC SUPPLY
eView® Engine Display - Configurable Engine Monitoring CONTINUOUS VOLTAGE RATING
8 V to 35 V continuous
(5 V for up to 1 minute)

CRANKING DROPOUTS
Able to survive 0 V for 100 mS, providing
supply was at least 10 V before dropout
and supply recovers to 5 V. This is achieved
without the need for internal batteries.

MAXIMUM OPERATING CURRENT

300 mA at 12 V, 150 mA at 24 V

MAXIMUM STANDBY CURRENT

80 mA at 12 V, 44 mA at 24 V

INPUTS
MULTI-FUNCTIONAL INPUTS A to D
Configurable as: digital, current, voltage,
resistance
0 V to 10 V
0 mA to 20 mA
0-3 kΩ

OUTPUTS
DC OUTPUTS A to C
1 A continuous at supply voltage

VREF OUT
100 mA at 10 V / 5 V

OPERATING TEMPERATURE RANGE

-40 ° C to +85 ° C
-40 ° F to +185 ° F

HEATED DISPLAY OPERATING RANGE

Turns on at -25 ° C / -13 ° F
Turns off at -5° C / 23 ° F
KEY FEATURES • Auto on/off heated display. KEY BENEFITS
• Fully configurable display colours • Industry standard Deutsch 18 pin • High resolution display provides STORAGE TEMPERATURE RANGE
• Adjustable display icons connector. excellent readability. -40 ° C to +85 ° C
• Monitors engine speed, oil -40 ° F to +185 ° F
• Digital / analogue I/O mapping to • Heated display for continual
icons pressure, coolant temperature, fuel operation in extreme cold DIMENSIONS
• TSC 1 speed control via push level & more. temperatures. OVERALL (W x H x D)
buttons or onboard inputs • Compatible with Tier 4 Final and • Licence-free PC software. 112.5 mm x 115 mm x 49 mm
4.43” x 4.53” x 1.93”
• Configurable displayed units Stage V engine parameters. • Uses DSE Configuration Suite PC PANEL CUTOUT
• SPN ignore list • TSC 1 messaging for speed control. Software for simplified configuration 80 mm / 3.15” Diameter
• Configurable speed step size & • DTCs for the display of DM1 and • User friendly set-up and soft-key
ramp DM2 diagnostic trouble codes. navigation for ease of use.
• 3.5” 320 x 240 pixel • Configurable CAN baud rate (250 • Compatible with a wide range of
optically bonded TFT display. kbit/s or 500 kbit/s). CAN engines.
• 4 configurable multi-functional • Configurable start-up screen and
inputs (digital, current, voltage, instrumentation pages.
resistance). • Dark and light screen themes.
• 3 outputs for external relays, LEDs • Five backlit soft navigation keys.
and audible buzzer. • Customised image display (30
• 80 mm circular panel cutout for screen support).
simple replacement of traditional • Low power/power save mode.
gauges. • PC configurable using
• IP67 rating offers increased DSE Configuration Suite Software.
resistance to water ingress.
• 120 Ω resistor software switchable.

RELATED MATERIALS
TITLE PART NO.
DSEE050 Operators Manual 057-300
DSEE050 Configuration Suite PC Software Manual 057-299
DSEE050 Installation Instructions 053-242

DEEP SEA ELECTRONICS LTD DEEP SEA ELECTRONICS INC

Highfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PH 3230 Williams Avenue, Rockford, IL 61101-2668 USA
TELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303 TELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708
EMAIL [email protected] WEBSITE www.deepseaelectronics.com EMAIL [email protected] WEBSITE www.deepseaelectronics.com
Deep Sea Electronics Ltd maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457 055-254/12/20 (3)
 DSEControl®

DSEE050 ENVIRONMENTAL TESTING STANDARDS

ELECTRO MAGNETIC COMPATIBILITY

eView® Engine Display - Configurable Engine Monitoring BS EN 6100-6-2

Electromagnetic Compatibility (EMC) Noise
Immunity

BS EN 6100-6-4
Electromagnetic Compatibility (EMC) Emission
The DSEE050 is a fully configurable using the DSE Configuration Suite Standard
colour engine display and controller Software, which allows users to
ISO 11452
designed to meet the demands create custom configurations and Electromagnetic Compatibility - Road Vehicles
of modern electronic engines and user interface screens.
equipment applications. ISO 7637-3: 2016
Users can also add company Road Vehicles - Electrical disturbances from
conduction and coupling
The DSEE050 supports J1939 branding to the display’s start-up Part 3: Electrical transient transmission by
electronic engines, including Tier screen and select from a light and capacitive and inductive coupling via lines
4F and stage V engine parameters dark background when the module other than supply lines
and supports TSC 1 messaging is in use.
allowing speed control messages ELECTRICAL SAFETY
to be sent over CAN. BS EN 61010
Safety Requirements for Electrical Equipment
for Measurement, Control & Laboratory Use.
The engine display is an extremely
powerful and versatile product BS EN 61010: 2010
suited to a wide number of different Part 1: General Requirements
application environments. BS EN 61010-2-030: 2010
The DSEE050 is fully configurable Part 2-030: Particular Requirements for
Testing Measuring Circuits

ELECTRICAL TESTS
ISO 16750-2: 2012
18 Pin Deutsch Connector Road vechicles - Environmental conditions
and testing for electrical and electronic
PIN DESCRIPTION equipment.
Part 2: Electrical loads
1 GND 4.6.3 Starting profile
4.6.4 Load dump
2 CAN Screen
CLIMATIC TESTS
3 CAN L IN
EN 60068-2-30
4 CAN H IN
Damp heat, cyclic upper temperature 55 ˚C

5 Input 4 EN 60068-2-78
Damp heat, steady state test temperature
6 Input 1 40 ˚C/93 % RH (21 Day Duration)

7 VDC Batt + MECHANICAL TESTS

EN 60068-2-6
8 CAN Screen Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
9 CAN L Out
EN 60068-2-27
10 CAN H Out
Part 2-27: Tests - Test Ea: Shock

11 GND TEMPERATURE
BS EN 60068-2-1
12 Input 2 Ab/Ae Cold Test -40 °C (-40 °F)

13 GND Batt BS EN 60068-2-2

Bb/Be Dry Heat +85 °C (185 °F)
14 Output 1
CHEMICAL
15 Output 2
ISO 16750-5
16 Output 3
Chemical testing for electrical and electronic
equipment - Road Vechicles
17 VREF Out
DEGREES OF PROTECTION
18 Input 3 PROVIDED BY ENCLOSURES
BS EN 60529
IP67/NEMA 6.

RELATED PARTS
TITLE PART NO.
DT16 Connector Complete With Pins 007-850
DT16 Connector Harness 016-176
DT16 Programming Connector Harness 016-177
USB-CAN Programming Interface (PCAN - USB - IPEH - 002022) 016-179

ISO 9001
Registered
Quality
Managem
ent

055-254/12/20 (3)
015