Outdoor power cabinet

The Type 3 cabinet platform is designed for a

variety of applications and can be tailored to fit
your specific needs. The cabinet is well suited for
power, batteries and telecom/industrial equipment,
all integrated into a robust package.
This solution has a unique cube design that give
flexibility to easily have various heights of
cabinets.

TYPE 3
OUTDOOR CABINET
Doc 234748.DS3 – rev10

RELIABILITY APPLICATIONS KEY FEATURES

 19” EQUIPMENT SPACE
Reliability within the outdoor plant depends The Type 3 cabinet is well suited for a wide
 OPTIONAL THERMAL INSULATION
upon a cool, dry and secure environment for range of Telecom and Industrial applications
 DC POWER, TELECOM/INDUSTRIAL
the electronics such as the DC power, such as: EQUIPMENT AND BATTERY BACKUP
Telecom and Industrial equipment. The Type  Radio Access Networks  GALVANIZED STEEL CONSTRUCTION
3 Outdoor Power Cabinet more than (2G, 3G, 4G / LTE / WiMax) (ALUMINUM UPON REQUEST)
 DOOR MOUNTED THERMAL MANAGEMENT
accomplishes this with a variety of Thermal  Optical Networks
OPTIONS:
Management solutions that will keep sensitive  Cable TV O FAN AND FILTER
electronics functioning in the most extreme  DSL O AIR CONDITIONER
environments.  SCADA O HEAT EXCHANGER
 Rail and Metro O HYBRID
 Power distribution O HEATERS
 CABINET VARIANTS:
The cabinet works very well as a stand-alone O SINGLE BAY
O DUAL BAY
power / battery backup solution and provides
O DUAL CHAMBER
additional space for telecom / Industrial
 CLOGGED FILTER DETECTION
equipment. In addition the outdoor enclosure
 ANTI VANDAL KIT
is suited for Industrial environments.
 UL 50
 IP55, NEMA 3R
 EASY INSTALLATION
 EASY FILTER CHANGE
 EASY MAINTENANCE

Eltek — Gråterudveien 8, PB 2340 Strømsø, 3003 Drammen, Norway Phone: +47 32 20 32 00 Eltek © 2012 – www.eltek.com 1(4)
TYPE 3
OUTDOOR CABINET

DUAL CHAMBER CABINET

DUAL CHAMBER CABINET
Eltek’s Dual Chamber Cabinet splits the cabinet into to
two climate zones. Top zone cools the electrical
equipment with a fan and filter, while the bottom zone
cools the batteries with a small air-conditioner.
With its unique feature of cooling the batteries only with
an air-conditioner, you will save capital cost as well as
operating cost
top chamber specification
Thermal management Fan/filter
Fan voltage 48Vdc
Fan speed control Temp. regulated
Cooling capacity 700W
19” space 10U
bottom chamber specifications
Thermal management Air-conditioner
Insulation Dual layer

Specifications are subject to change without notice

DUAL BAY CABINET

DUAL BAY CABINET
With a dual bay cabinet you are able to combine power,
batteries, telecom equipment and even an Indoor BTS
in one cabinet stand. This unique solution gives you the
best flexibility and provides easy use of indoor BTS’s
used in an Outdoor Cabinet. The right bay can also be
equipped with high capacity batteries for hybrid sites for
cyclic gen sets or solar/wind powered sites
HEAT MANAGEMENT SPECIFICATIONS
Thermal management Fan/filter
Fan Voltage 48Vdc
Fan speed control Temp. regulated
Thermally separated left and right bay

OPTIONS
Anti-vandal security feature
Top cable entry for RF cables
Battery shelf space in Right Bay:
(W x D x H) 700mm x 516mm x 180mm
(27,5” x 20,3” x 7”)
DIMENSIONAL SPECIFICATIONS
Cabinet height 2200mm (86,6”)
Cabinet depth 901mm (35,5”)
Cabinet width 1462mm (57,6”)

Specifications are subject to change without notice

Eltek — Gråterudveien 8, PB 2340 Strømsø, 3003 Drammen, Norway Phone: +47 32 20 32 00 Eltek © 2012 – www.eltek.com 2(4)
Doc 234748.DS3 – rev10
TYPE 3
-
OUTDOOR CABINET

HEAT EXCHANGER
HEAT EXCHANGER
Eltek’s Heat Exchanger provides a closed loop heat
management system that protects the equipment from
corrosive and highly polluted environments and has a
low operating cost. Site maintenance is brought to a
minimum level as filter change is not required.
TECHNICAL SPECIFICATIONS
Cooling capacity 100W/k
Epoxy coated
Heat Exchanger core
aluminum
48Vdc / 100W /
Fans specification
IP44
Fan speed control Temp. regulated

PHYSICAL SPECIFICATIONS
Height 1092mm (43,0”)
Depth 201,5mm (7,9”)
Width 401,5mm (15,8”)
Weight 34,3kg (76,18 lbs)
Adds 202mm (7,95”) to depth of the cabinet

CONSTRUCTION SPECIFICATIONS
Galvanized steel (non-corrosive) skin material
UL rated gasket for outdoor use
Outdoor Polyester powder coating Light grey RAL 7035
Mesh screens out unwanted objects such as bugs and
leaves.

Specifications are subject to change without notice

FREE COOLING
FREE COOLING
Eltek’s free cooling cabinets have the advantage that a
large amount of air can be exchanged, giving very high
cooling performance with low power consumption. The
cabinets are designed with overpressure which provides
higher sealing performance.
TECHNICAL SPECIFICATIONS
Cooling capacity 2000W
Fan(s) Single or dual fans (optional)
Fans specification 48Vdc / 100W / IP44
Fan speed control Temp. regulated
Optional F5 (EN 779) filters:
Easy change - Progressive dump filter, 0,35m2
Inlet filter - Pleated filter, 4,2 m2 – 5,8 m2
- Gore pleated filter, 4,2 m2
Easy change F5 (EN 779) filter:
Outlet filter Progressive dump filter, 0,22 m2
PHYSICAL SPECIFICATIONS
Integrated in the door and adds 53mm (2”) to depth of the
cabinet
CONSTRUCTION SPECIFICATIONS
Material Galvanized steel
Aluminium made with large openings
Splash guard
to ensure low speed airflow
Heater(s) Optional one or two heaters
Optional: sends an alarm when filter
Filter detection
gets clogged or if filter is removed

Specifications are subject to change without notice

Eltek — Gråterudveien 8, PB 2340 Strømsø, 3003 Drammen, Norway Phone: +47 32 20 32 00 Eltek © 2012 – www.eltek.com 3(4)
Doc 234748.DS3 – rev10
TYPE 3
OUTDOOR CABINET

Model 1,2m 1,5m 1,8m 2,2m

PHYSICAL SPECIFICATIONS
Exterior Width (mm)* 700 (27,5”) 700 (27,5”) 700 (27,5”) 700 (27,5”)
Exterior Depth (mm)* 770 (30,3”) 770 (30,3”) 770 (30,3”) 770 (30,3”)
Weight* 68,6Kg (151 lbs) 94kg (207 lbs) 100kg (220 lbs) 105Kg (231 lbs)
Rack space 22U 28U 34U 44U
*Info does not contain cooling options

CONSTRUCTION SPECIFICATIONS
Skin Material 1.5mm (0.06”) thick electro-galvanized steel (corrosion-resistant)
Frame Material Galvanized Steel
Powder-Coat Paint Outdoor Polyester Light gray RAL 7035 coating
Insulation Closed Cell Insulation

DOOR SPECIFICATIONS
Latches Four-point latched, available with an optional lock
Gasket UL rated for outdoor use
Door Stop / Door Stay Wind latch to hold door during maintenance (120o)
Fan and Filter Solution See page 3 for details
Heat Exchanger See page 3 for details
1kW, 1,2kW or 1.7kW at 50Hz &
35C/35C, Weights range from 69.8kg (152lbs)
Air Conditioning Unit
IP55 rated, adds 250mm (9.8”) to to 79.1kg (174lbs)
depth
Hybrid Cooling Unit Active cooling/Free cooling solution See contact for more information

RAIL SPECIFICATIONS
Construction Galvanized Steel
Mounting Pattern EIA Standard with holes for cage nuts Optional M5 or M6 kits available
Mounting 19” mount - Available kits from 5U 23” versions available up on request

MISCELLANEOUS SPECIFICATIONS AND OPTIONS

Bottom Cable Access through a 2x
Cable Entry Various glands available upon request
FL21 cut outs
Optional 23” tray(s) capable of holding
Battery trays a string of batteries up to 260kg Each tray weighs 5.6kg (12.3lbs)
(572 lbs)
Ground Bar 11 position M6 pressnut
Optional 400W, can install up to 2
Heater Each kit weighs 1.3Kg (2.86lbs)
heaters
Foot Print (W x D) 698mm x 743mm
Plinth
(27,5” x 29”)
Lifting Ears 4 lifting ears located under top cover
Special Cabinets available to handle
Zone 4 See contact for more information
Zone 4 Seismic activity
Shipments made in an upright
Shipping Pallet Weight of packing 14kg (30lbs)
position on a wood pallet
DESIGN STANDARDS
IEC 60950, UL 60950*, CAN CSA-C22.2 No. 60950-1-03
Electrical
(Depending on Equipment Installed)
EMC ETSI EN 300 386 V.1.3.1, EN 61000-6-3, EN 61000-6-2
Environment ETS 300 019, Ingress Protection: EN 60529 IP55

Specifications are subject to change without notice

Eltek — Gråterudveien 8, PB 2340 Strømsø, 3003 Drammen, Norway Phone: +47 32 20 32 00 Eltek © 2012 – www.eltek.com 4(4)
Doc 234748.DS3 – rev10