Scribd
Upload
78 views3 pages

Technical Specifications: Public Water Supply Grid Monitoring To Avoid Tampering & Water Man Fraud Using Iot

This document describes a project to monitor a public water supply system using IoT to prevent tampering and fraud. Sensors will detect water flow in pipelines and an AT89S52 microcontroller will send the data to a web server via an ESP8266 WiFi module. This will allow authorities to monitor usage and ensure water is only released as scheduled to prevent theft. The system uses a 5V power supply and sensors to automatically detect improper or unauthorized water use in the distribution system.

Uploaded by

rock star
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
78 views3 pages

Technical Specifications: Public Water Supply Grid Monitoring To Avoid Tampering & Water Man Fraud Using Iot

This document describes a project to monitor a public water supply system using IoT to prevent tampering and fraud. Sensors will detect water flow in pipelines and an AT89S52 microcontroller will send the data to a web server via an ESP8266 WiFi module. This will allow authorities to monitor usage and ensure water is only released as scheduled to prevent theft. The system uses a 5V power supply and sensors to automatically detect improper or unauthorized water use in the distribution system.

Uploaded by

rock star
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

Public water supply grid monitoring to avoid tampering & water

man fraud using IoT

Technical specifications

Project title : Public water supply grid monitoring to avoid tampering & water man
fraud using IoT
Domain : Embedded Systems Design

Software : Embedded C, Keil, Proload

Microcontroller : AT89S52

Power Supply : +5V, 500mA Regulated Power Supply

Display : LCD

LCD : HD44780 16-character, 2-line (16X2)

Crystal : 11.0592MHz

Sensor : Magnetic sensors

Communication device : ESP8266


Abstract:

In urban areas the water supply to residence and commercial establishments


are provided at a fixed flow rate. There are incidents of excess water drawn by certain
customers/users i.e water will be released unofficially which is considered as water
theft. In this project it is proposed to develop an embedded based remote water
monitoring and theft prevention system by taking the data of water supply at the
consumer/user end.

The overall objective of a distribution system is to deliver wholesome water to


the consumer at particular area and in sufficient quantity and achieve continuity and
maximum coverage at affordable cost. To attain this objective the organization has to
evolve operating procedures to ensure that the system can be operated satisfactorily,
function efficiently and continuously as far as possible at lowest cost.

Here we are using AT89S52 as our controller and also few sensors are
arranged to detect the presence of water in that particular pipeline. As magnetic
sensors are used to detect the water flow. Water should be released as per the
instructions by officials i.e for example alternate days of supply is provided and only
during specific period of time but not daily.

All the details will be shown in the web server using IoT module connected to
the controller. So that the authorities can take necessary action in case of misuse. This
is an advanced, trouble-free, fit and forget system for water board. By using all these
malfunctioning can be avoided.

This project uses regulated 5V, 500mA power supply. 7805 three terminal
voltage regulator is used for voltage regulation. Bridge type full wave rectifier is used
to rectify the ac out put of secondary of 230/12V step down transformer.
Block diagram:

Contrast
Pipeline 2
Magnetic
sensor 2 LCD
16x2
A
Pipeline 1
Magnetic
Magnetic
sensor 1 T
sensor 4 Central zone
of water
8

9
Magnetic
Pipeline 3
sensor 3 S

5
Pipeline 4 WiFi - IoT
Phone
2 Module
ESP8266

Step Bridge Filter


down Rectifier Circuit Regulator
T/F Power supply to all sections

You might also like