Scribd Logo
Upload

Welcome to Scribd!

  • 98 views

    Simpos Checklist

    Uploaded by

    Asad Maher
    This SIMOPS checklist is used to ensure safety during simultaneous operations (SIMOPS) such as construction, commissioning, and production activities. It contains questions to verify that the proper safety measures are in place, including assigning a person in charge, developing work plans, using proper personal protective equipment, controlling ignition sources, and ensuring all personnel are trained on emergency procedures. Activities with additional hazards like welding, lifting, blasting, and commissioning also have sections to confirm the necessary isolations and precautions are followed. The checklist is signed off on after being completed to document verification of the safety requirements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Simpos Checklist

    Uploaded by

    Asad Maher
    98 views3 pages
    This SIMOPS checklist is used to ensure safety during simultaneous operations (SIMOPS) such as construction, commissioning, and production activities. It contains questions to verify that the proper safety measures are in place, including assigning a person in charge, developing work plans, using proper personal protective equipment, controlling ignition sources, and ensuring all personnel are trained on emergency procedures. Activities with additional hazards like welding, lifting, blasting, and commissioning also have sections to confirm the necessary isolations and precautions are followed. The checklist is signed off on after being completed to document verification of the safety requirements.

    Original Title

    Simpos-Checklist

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This SIMOPS checklist is used to ensure safety during simultaneous operations (SIMOPS) such as construction, commissioning, and production activities. It contains questions to verify that the proper safety measures are in place, including assigning a person in charge, developing work plans, using proper personal protective equipment, controlling ignition sources, and ensuring all personnel are trained on emergency procedures. Activities with additional hazards like welding, lifting, blasting, and commissioning also have sections to confirm the necessary isolations and precautions are followed. The checklist is signed off on after being completed to document verification of the safety requirements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    98 views3 pages

    Simpos Checklist

    Uploaded by

    Asad Maher
    This SIMOPS checklist is used to ensure safety during simultaneous operations (SIMOPS) such as construction, commissioning, and production activities. It contains questions to verify that the proper safety measures are in place, including assigning a person in charge, developing work plans, using proper personal protective equipment, controlling ignition sources, and ensuring all personnel are trained on emergency procedures. Activities with additional hazards like welding, lifting, blasting, and commissioning also have sections to confirm the necessary isolations and precautions are followed. The checklist is signed off on after being completed to document verification of the safety requirements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    SIMOPS Checklist

    Person in Charge: …………………………. Location: ……………………………………

    Subcontractor: ……………………………. Unit: …………………………………………

    Activity: ………………….………………. Date: ……………………………………….

    Construction: …...………………………….

    Commissioning: ……………………………

    Production: …………………………………

    SIMOPS Checklist Yes No N/A If No, Explain


    General

    1. Has person-in-charge been assigned for the


    SIMOPS?
    2. Has supervisory cover been provided?
    3. Has SIMOPS work plan been developed?
    4. Is copy of permit available?
    5. Have all persons involved in the SIMOPS
    been instructed in;
    5a. SIMOPS procedures
    5b. Emergency procedures and alarms.
    5c. Muster Point Locations.
    5d. Fighting equipment and locations?
    6. Is good housekeeping practiced?
    7. Is smoking restricted to designated areas?
    8. Has electrical equipment been suitable
    grounded and inspected?
    9. Have all personnel working in the restricted
    area registered at the security gate?
    10. Are personnel at risk from H2S?
    11. Are personnel issued with an H2S escape
    mask?
    12. Are welding works required?
    13. Are all non-essential personnel removed from
    the SIMOPS area?

    SIMOPS Checklist Yes No N/A If No, Explain


    Gas Checking

    1|Page https://hsseworld.com
    1. Are gas detectors calibrated and tested?
    2. Do gas detectors initiate and audible alarm
    when LEL is detected?
    3. Is gas tested authorized for this activity?
    Safety

    1. Is adequate PPE being worn?


    2. Is fire watch / stand-by man assigned?
    3. Are a fire hose and/or fire extinguisher
    available?
    4. Barriers and warning signs erected?
    5. Are gas checks completed and recorded?
    6. Is MSDS available?
    7. Has emergency response team been
    informed?
    8. Is radiography required?
    9. Are confined space procedures being
    followed?
    10. Are gas detectors and/or ESD systems
    inhibited?
    11. Are all sparks being contained?
    14. Has JSA been developed?
    Construction Work – Naked Flame Works

    1. Are daily toolbox meetings held?


    2. Is work permit authorized and available?
    3. Are conditions of the permit being followed?

    4. Are suitable flame retardant materials being


    used to contain sparks?
    5. Have all necessary isolations been
    completed?
    6. Are welding machines inspected and
    positioned in suitable location?
    7. Are welding cables insulated and in good
    condition?
    8. Are compressed gas cylinders secured, fitted
    with flame arrestors and free from grease
    and oil?

    Construction Works – Rigging and Lifting

    1. Are rigging and lifting personnel qualified


    and competent?
    2. Has risk assessment been undertaken and
    addressed with all personnel?

    2|Page https://hsseworld.com
    SIMOPS Checklist Yes No N/A If No, Explain
    3. Are the crane, shackles and slings visually
    inspected prior to the start of lifting
    operations?
    4. Is the rigging and lifting equipment color
    coded?
    5. Is the crane operation qualified?
    6. Are crane inspection records available?
    7. Is rigging supervisor clearly identified by
    wearing a green work vest?
    Construction Works – Blasting and Painting

    1. Has toolbox meeting been held?


    2. Are paints and thinners stored in safe
    location?
    3. Have critical lines and vessels been identified,
    checked and determined as safe to blast?

    4. Is surrounding area sufficiently protected


    from blast materials and pain overspray?
    Commissioning Works

    1. Is all equipment depressurized and/or


    isolated?
    2. Is equipment purged of gas and/or vapor?
    3. Is electrical and/or mechanical equipment
    locked-out and tagged?
    4. Are open drains and culverts covered?
    5. Are all necessary permits to work authorized?

    6. Are electrical isolations recorded?


    7. Are process/mechanical isolations recorded?
    8. Is commissioning Supervisor assigned?

    Signed: ………………………………………….
    Date: …………………………………………….

    3|Page https://hsseworld.com

    You might also like