DESIGN OF BOX TYPE LINE DRAIN OF SIZE 0.

6m AND
HEIGHT UPTO 1.5m
Detailed Design for 6 loaning of Hosur- Krishnagiri Section of NH-7

DESIGN OF BOX TYPE DRAIN

0.60 m x 1.500 m

1.600 m
1.50 m 1.850 m
0.20 m 0.200 m
0.60 m Drain Base Width (Clear) 0.60 m
Drain Height (Clear) 1.50
m
Wall Thickness 0.20 m
Base Thickness 0.20 m
0.200 m Top Slab Thickness 0.15 m
1.000 m
0.400 m 0.400 m

0.800 m

Self weight of Earth = 2.00t/m3

Self weight of Concrete = 2.50t/m3 (IRC: 6 - 2010)

Grade of Concrete = M 25
Allowable Bending Stress scbc = 8.33 MPa (Table 9 IRC 21-2000)
Grade of steel = Fe 500
Allowable stress in Steel = 240 MPa (Table 10 IRC 21-2000)
Modular Ratio m = 10 (Note 1Table 9 IRC 21-2000)
n Neutral Axis depth factor = 0.258
j Leverarm factor = 0.914
Q Moment of Resistance factor = = 0.98 MPa

1 LOAD CALCULATION

1) Dead load

Wall
UDL of Vertical Walls 0.2 x 2.5 = in t/sq. m = = 0.5
Height of wall = 1.65 m
Weight of wall = 0.825 t/m

Base slab
UDL of Base Slab = 0.2 x 2.5 = 0.5
Length of slab = 1.00 m
Load = 0.50 t/m

0.100 m 0.100 m

0.800 m 1.600 m

0.83 t 0.83 t

0.000 t 0.000 t
0.50 t/m

DESIGN OF BOX TYPE DRAIN

H K Toll Road Pvt. Ltd.
REVISION : R0
Detailed Design for 6 loaning of Hosur- Krishnagiri Section of NH-7

2) Earth Pressure

Density of Soil = 2.0 t/m3

Angle of Internal Friction = 30 º
Surcharge Angle b = 0º
Wall Angle a = 90 º
SBC = 10 t/m2
Angle of Wall Friction d = 20 º
sin 2 (   ) cos 1
Ka  x
sin2  sin( -  )  sin(   ) sin( -  ) 
2

1  
 sin( -  ) sin(   ) 

Earth pressure Coefficient = 0.279 (IRC 6-2010 Cl. 217.1 )

Hence, Pressure at base of box = ###
Surcharge Height = ### (IRC 6-2010 Cl. 217.1 )
Pressure on Wall (1.2 x 0.279 x 2 ) = ###

settlement = 40 mm
Spring constant = 250.0 t/m2 per m width
No of Springs to be provided = 10 Nos
spring constant at end supports = 12.5 t/m depth per m width
spring constant at intermediate supports (adjacent to end support) = ### t/m depth per m width
spring constant at intermediate supports = ### t/m depth per m width

0.000
1.071 t
0.80 m 1.600 m
1.03m

0.67 m

1.032 t/m 0.67 t/m 0.67 t/m 1.032 t/m

Earth Surcharge 0.800 m Surcharge Earth
Pressure Pressure Pressure Pressure

DL+SIDL
STAAD PLANE FRAME ANALYSIS FOR DRAIN OF SIZE 0.8 X 1.6
UNITS MTONS METERS
JOINT COORDINATES
1 0.00 0.00 0.00
2 0.800 0.00 0.00
4 0.00 1.600 0.00
3 0.800 1.600 0.00
5 0.100 0.00 0.00
6 0.700 0.00 0.00
7 0.800 0.100 0.00
8 0.00 0.100 0.00
9 0.186 0.00 0.00
10 0.271 0.00 0.00
11 0.357 0.00 0.00
12 0.443 0.00 0.00
13 0.529 0.00 0.00
14 0.614 0.00 0.00
MEMBER INCIDENCES
148
281
315
459
5 9 10
6 10 11
7 11 12
8 12 13
9 13 14
10 14 6
11 6 2
12 7 2
13 3 7
MEMBER PROPERTIES
DESIGN OF BOX TYPE DRAIN
H K Toll Road Pvt. Ltd.
REVISION : R0
Detailed Design for 6 loaning of Hosur- Krishnagiri Section of NH-7

3 11 PRIS YD 0.2 ZD 1.0

4 to 10 PRIS YD 0.2 ZD 1.0

DESIGN OF BOX TYPE DRAIN

H K Toll Road Pvt. Ltd.
REVISION : R0
Detailed Design for 6 loaning of Hosur- Krishnagiri Section of NH-7

1 13 PRIS YD 0.2 ZD 1.0

2 12 PRIS YD 0.2 ZD 1.0
CONSTANTS
E CONCRETE ALL
POISSON CONCRETE ALL
SUPPORTS
1 2 FIXED BUT FX FZ MX MY MZ KFY 12.500
5 6 FIXED BUT FX FZ MX MY MZ KFY 23.214
9 TO 14 FIXED BUT FX FZ MX MY MZ KFY 21.429
LOAD 1 DEAD LOADS
MEMBER LOADS
3 TO 11 UNI GY -0.500
3 CONC GY -0.000 0.100
11 CONC GY -0.000 0.000
1 13 CONC GY -0.825
LOAD 2 EARTH PRESSURES
MEMBER LOADS
1 TRAP GX 0 0.968
2 TRAP GX 0.968 1.032
13 TRAP GX 0 -0.968
12 TRAP GX -0.968 -1.032
1 TO 2 UNI GX 0.670
12 TO 13 UNI GX -0.670
LOAD COMB 3 LOAD COMBINATION
1 1.0 2 1.0
PERFORM ANALYSIS
PRINT ANALYSIS RESULTS
PRINT FORCE ENVELOPE NS 10
FINISH

2 ANALYSIS RESULTS

Description Base Slab Walls

Sl. No.
Moment-tm SF-d dist-t Moment-tm SF-d dist-t
1 Dead Load+Earth Pressures 1.23 0.75 1.12 1.73

3 DESIGN OF DRAIN
Design constants
Grade of Concrete M
= 25
Allowable Bending Stress (scbc) 8
=.33 MPa
Grade of steel F
=e 500
Allowable stress in Steel 2
=40 MPa
modular Ratio (m) 1
=0
Neutral Axis depth factor (h) 0
=.258
Leverarm factor (j) 0
=.914
Moment of Resistance factor (Q) 0
=.98 MPa

a) DESIGN OF BASE SLAB

Total moment on base slab due to Moment-tm Shear-t MAX Moment with impact-tm
DL+Earth pressures 1.23 0.75
Net maximum moment on base slab = 1.23 t-m Clear Cover = 75.0 mm
Hence, Effective Depth required = 111.8 mm
Total Depth Provided = 200 mm
Effective Cover = 80 mm
Hence, Effective Depth provided = 120 mm > Required, Hence, OK
Area of steel to be provided = 465.70 mm²
Minimum area of steel = 0.12% = 240.00 mm²
Provide TOR 10 dia @ 150 mm c/c 523 mm² Percent = 0.44 %
Shear check
Max. SF = 0.75 t
Shear Stress = 0.062MPa
For this percentage of steel, the allowable shear stress from table 11B of Amendments to IRC:21-1987
= #NAME?
#NAME?

Distribution reinforcement = .2 DL Moment

= 0.25 t-m
Ast = 96.35 mm²
Provide 8 dia @ @ 521mm Provide @ 200mm

DESIGN OF BOX TYPE DRAIN

H K Toll Road Pvt. Ltd.
REVISION : R0
Detailed Design for 6 loaning of Hosur- Krishnagiri Section of NH-7

b) DESIGN OF WALLS

Total moment on wall due to Moment-tm Shear-t Max Moment-tm

DL+Earth pressures 1.12 1.73

Net maximum moment on walls = 1.12 t-m Clear Cover = 75.0 mm

Hence, Effective Depth required = 107 mm
Total Depth Provided = 200 mm
Effective Cover = 80 mm
Hence, Effective Depth provided = 120 mm > Required, Hence, OK
Area of steel to be provided = 424.30 mm²
Minimum area of steel = 0.12% = 240.00 mm²

Provide TOR 10 dia @ 150 mm c/c 523 mm² Percent = 0.44 %

Shear check
Max. SF = 1.73 t
Shear Stress = 0.144MPa
For this percentage of steel, the allowable shear stress from table 11B of Amendments to IRC:21-1987
= #NAME?
#NAME?

Distribution reinforcement = .2 DL Moment

= 0.22 t-m
Ast = 87.79 mm²
Provide 8 dia @ @ 572mm Provide @ 200mm

c) DESIGN OF TOP SLAB

Thickness of Top Slab = 150 mm

Span of Slab = 0.60 m
UDL of Top Slab = 0.375 t/m
Moment due to DL = 0.017 t/m
Footpath Live Load as per IRC:6-2010 = 0.400 t/m
Moment due to LL = 0.018 t/m
Total Bending Moment = 0.035 t-m
Effective Depth Required = 18.8 mm
Total Depth Provided = 150 mm Clear Cover = 50.0 mm
Effective Cover = 55 mm
Effective Depth Provided = 95 mm > Required, Hence, OK
Area of steel to be provided = 16.73 mm²
Minimum area of steel = 0.12% = 180.00 mm²

Provide TOR 10 dia @ 150 mm c/c 523 mm² Percent = 0.55 %

Distribution reinforcement = .2 DL Moment + 0.3 LL Moment

= 0.01 t-m
Ast = 4.40 mm²
Provide 8 dia @ @ 11430mm Provide @ 200mm

DESIGN OF BOX TYPE DRAIN

H K Toll Road Pvt. Ltd.
REVISION : R0
DESIGN OF BOX TYPE LINE DRAIN OF SIZE 1.1m AND
HEIGHT UPTO 1.5m
Detailed Design for 6 loaning of Hosur- Krishnagiri Section of NH-7

DESIGN OF BOX TYPE DRAIN

1.10 m x 1.500 m

1.600 m
1.50 m 1.850 m
0.20 m 0.200 m
1.10 m Drain Base Width (Clear) 1.10 m
Drain Height (Clear) 1.50
m
Wall Thickness 0.20 m
Base Thickness 0.20 m
0.200 m Top Slab Thickness 0.15 m
1.500 m
0.650 m 0.650 m

1.300 m

Self weight of Earth = 2.00t/m3

Self weight of Concrete = 2.50t/m3 (IRC: 6 - 2010)

Grade of Concrete = M 25
Allowable Bending Stress scbc = 8.33 MPa (Table 9 IRC 21-2000)
Grade of steel = Fe 500
Allowable stress in Steel = 240 MPa (Table 10 IRC 21-2000)
Modular Ratio m = 10 (Note 1Table 9 IRC 21-2000)
n Neutral Axis depth factor = 0.258
j Leverarm factor = 0.914
Q Moment of Resistance factor = = 0.98 MPa

1 LOAD CALCULATION

1) Dead load

Wall
UDL of Vertical Walls 0.2 x 2.5 = in t/sq. m = = 0.5
Height of wall = 1.65 m
Weight of wall = 0.825 t/m

Base slab
UDL of Base Slab = 0.2 x 2.5 = 0.5
Length of slab = 1.50 m
Load = 0.75 t/m

0.100 m 0.100 m

1.300 m 1.600 m

0.83 t 0.83 t

0.000 t 0.000 t
0.50 t/m

DESIGN OF BOX TYPE DRAIN

H K Toll Road Pvt. Ltd.
REVISION : R0
Detailed Design for 6 loaning of Hosur- Krishnagiri Section of NH-7

2) Earth Pressure

Density of Soil = 2.0 t/m3

Angle of Internal Friction = 30 º
Surcharge Angle b = 0º
Wall Angle a = 90 º
SBC = 10 t/m2
Angle of Wall Friction d = 20 º
sin 2 (   ) cos 1
Ka  x
sin2  sin( -  )  sin(   ) sin( -  ) 
2

1  
 sin( -  ) sin(   ) 

Earth pressure Coefficient = 0.279 (IRC 6-2010 Cl. 217.1 )

Hence, Pressure at base of box = ###
Surcharge Height = ### (IRC 6-2010 Cl. 217.1 )
Pressure on Wall (1.2 x 0.279 x 2 ) = ###

settlement = 40 mm
Spring constant = 250.0 t/m2 per m width
No of Springs to be provided = 10 Nos
spring constant at end supports = 12.5 t/m depth per m width
spring constant at intermediate supports (adjacent to end support) = ### t/m depth per m width
spring constant at intermediate supports = ### t/m depth per m width

0.000
1.071 t
0.80 m 1.600 m
1.03m

0.67 m

1.032 t/m 0.67 t/m 0.67 t/m 1.032 t/m

Earth Surcharge 1.300 m Surcharge Earth
Pressure Pressure Pressure Pressure

DL+SIDL
STAAD PLANE FRAME ANALYSIS FOR DRAIN OF SIZE 1.3 X 1.6
UNITS MTONS METERS
JOINT COORDINATES
1 0.00 0.00 0.00
2 1.300 0.00 0.00
4 0.00 1.600 0.00
3 1.300 1.600 0.00
5 0.100 0.00 0.00
6 1.200 0.00 0.00
7 1.300 0.100 0.00
8 0.00 0.100 0.00
9 0.257 0.00 0.00
10 0.414 0.00 0.00
11 0.571 0.00 0.00
12 0.729 0.00 0.00
13 0.886 0.00 0.00
14 1.043 0.00 0.00
MEMBER INCIDENCES
148
281
315
459
5 9 10
6 10 11
7 11 12
8 12 13
9 13 14
10 14 6
11 6 2
12 7 2
13 3 7
MEMBER PROPERTIES
DESIGN OF BOX TYPE DRAIN
H K Toll Road Pvt. Ltd.
REVISION : R0
Detailed Design for 6 loaning of Hosur- Krishnagiri Section of NH-7

3 11 PRIS YD 0.2 ZD 1.0

4 to 10 PRIS YD 0.2 ZD 1.0

DESIGN OF BOX TYPE DRAIN

H K Toll Road Pvt. Ltd.
REVISION : R0
Detailed Design for 6 loaning of Hosur- Krishnagiri Section of NH-7

1 13 PRIS YD 0.2 ZD 1.0

2 12 PRIS YD 0.2 ZD 1.0
CONSTANTS
E CONCRETE ALL
POISSON CONCRETE ALL
SUPPORTS
1 2 FIXED BUT FX FZ MX MY MZ KFY 12.500
5 6 FIXED BUT FX FZ MX MY MZ KFY 32.143
9 TO 14 FIXED BUT FX FZ MX MY MZ KFY 39.286
LOAD 1 DEAD LOADS
MEMBER LOADS
3 TO 11 UNI GY -0.500
3 CONC GY -0.000 0.100
11 CONC GY -0.000 0.000
1 13 CONC GY -0.825
LOAD 2 EARTH PRESSURES
MEMBER LOADS
1 TRAP GX 0 0.968
2 TRAP GX 0.968 1.032
13 TRAP GX 0 -0.968
12 TRAP GX -0.968 -1.032
1 TO 2 UNI GX 0.670
12 TO 13 UNI GX -0.670
LOAD COMB 3 LOAD COMBINATION
1 1.0 2 1.0
PERFORM ANALYSIS
PRINT ANALYSIS RESULTS
PRINT FORCE ENVELOPE NS 10
FINISH

2 ANALYSIS RESULTS

Description Base Slab Walls

Sl. No.
Moment-tm SF-d dist-t Moment-tm SF-d dist-t
1 Dead Load+Earth Pressures 1.22 0.79 1.12 1.73

3 DESIGN OF DRAIN
Design constants
Grade of Concrete M
= 25
Allowable Bending Stress (scbc) 8
=.33 MPa
Grade of steel F
=e 500
Allowable stress in Steel 2
=40 MPa
modular Ratio (m) 1
=0
Neutral Axis depth factor (h) 0
=.258
Leverarm factor (j) 0
=.914
Moment of Resistance factor (Q) 0
=.98 MPa

a) DESIGN OF BASE SLAB

Total moment on base slab due to Moment-tm Shear-t MAX Moment with impact-tm
DL+Earth pressures 1.22 0.79
Net maximum moment on base slab = 1.22 t-m Clear Cover = 75.0 mm
Hence, Effective Depth required = 111.6 mm
Total Depth Provided = 200 mm
Effective Cover = 80 mm
Hence, Effective Depth provided = 120 mm > Required, Hence, OK
Area of steel to be provided = 464.18 mm²
Minimum area of steel = 0.12% = 240.00 mm²
Provide TOR 10 dia @ 150 mm c/c 523 mm² Percent = 0.44 %
Shear check
Max. SF = 0.79 t
Shear Stress = 0.066MPa
For this percentage of steel, the allowable shear stress from table 11B of Amendments to IRC:21-1987
= #NAME?
#NAME?

Distribution reinforcement = .2 DL Moment

= 0.24 t-m
Ast = 96.04 mm²
Provide 8 dia @ @ 523mm Provide @ 200mm

DESIGN OF BOX TYPE DRAIN

H K Toll Road Pvt. Ltd.
REVISION : R0
Detailed Design for 6 loaning of Hosur- Krishnagiri Section of NH-7

b) DESIGN OF WALLS

Total moment on wall due to Moment-tm Shear-t Max Moment-tm

DL+Earth pressures 1.12 1.73

Net maximum moment on walls = 1.12 t-m Clear Cover = 75.0 mm

Hence, Effective Depth required = 107 mm
Total Depth Provided = 200 mm
Effective Cover = 80 mm
Hence, Effective Depth provided = 120 mm > Required, Hence, OK
Area of steel to be provided = 424.30 mm²
Minimum area of steel = 0.12% = 240.00 mm²

Provide TOR 10 dia @ 150 mm c/c 523 mm² Percent = 0.44 %

Shear check
Max. SF = 1.73 t
Shear Stress = 0.144MPa
For this percentage of steel, the allowable shear stress from table 11B of Amendments to IRC:21-1987
= #NAME?
#NAME?

Distribution reinforcement = .2 DL Moment

= 0.22 t-m
Ast = 87.79 mm²
Provide 8 dia @ @ 572mm Provide @ 200mm

c) DESIGN OF TOP SLAB

Thickness of Top Slab = 150 mm

Span of Slab = 1.10 m
UDL of Top Slab = 0.375 t/m
Moment due to DL = 0.057 t/m
Footpath Live Load as per IRC:6-2010 = 0.400 t/m
Moment due to LL = 0.061 t/m
Total Bending Moment = 0.117 t-m
Effective Depth Required = 34.6 mm
Total Depth Provided = 150 mm Clear Cover = 50.0 mm
Effective Cover = 55 mm
Effective Depth Provided = 95 mm > Required, Hence, OK
Area of steel to be provided = 56.24 mm²
Minimum area of steel = 0.12% = 180.00 mm²

Provide TOR 10 dia @ 150 mm c/c 523 mm² Percent = 0.55 %

Distribution reinforcement = .2 DL Moment + 0.3 LL Moment

= 0.03 t-m
Ast = 14.77 mm²
Provide 8 dia @ @ 3401mm Provide @ 200mm

DESIGN OF BOX TYPE DRAIN

H K Toll Road Pvt. Ltd.
REVISION : R0
Detailed Design for 6 loaning of Hosur- Krishnagiri Section of NH-7

DESIGN OF BOX TYPE DRAIN

1.10 m x 1.500 m

1.600 m
1.50 m 1.700 m
0.20 m 0.200 m
1.10 m Drain Base Width (Clear) 1.10 m
Drain Height (Clear) 1.50
m
Wall Thickness 0.20 m
Base Thickness 0.20 m
0.200 m Top Slab Thickness 0.15 m
1.500 m
0.650 m 0.650 m

1.300 m

Self weight of Earth = 2.00t/m3

Self weight of Concrete = 2.50t/m3 (IRC: 6 - 2010)

Grade of Concrete = M 20
Allowable Bending Stress scbc = 6.67 MPa (Table 9 IRC 21-2000)
Grade of steel = Fe 500
Allowable stress in Steel = 240 MPa (Table 10 IRC 21-2000)
Modular Ratio m = 10 (Note 1Table 9 IRC 21-2000)
n Neutral Axis depth factor = 0.217
j Leverarm factor = 0.928
Q Moment of Resistance factor = = 0.67 MPa

1 LOAD CALCULATION

1) Dead load

Wall
UDL of Vertical Walls 0.2 x 2.5 = in t/sq. m = = 0.5
Height of wall = 1.50 m
Weight of wall = 0.750 t/m

Base slab
UDL of Base Slab = 0.2 x 2.5 = 0.5
Length of slab = 1.50 m
Load = 0.75 t/m

0.100 m 0.100 m

1.300 m 1.600 m

0.75 t 0.75 t

0.000 t 0.000 t
0.50 t/m

DESIGN OF BOX TYPE DRAIN

H K Toll Road Pvt. Ltd.
REVISION : R0
Detailed Design for 6 loaning of Hosur- Krishnagiri Section of NH-7

2) Earth Pressure

Density of Soil = 2.0 t/m3

Angle of Internal Friction = 30 º
Surcharge Angle b = 0º
Wall Angle a = 90 º
SBC = 10 t/m2
Angle of Wall Friction d = 20 º
sin 2 (   ) cos 1
Ka  x
sin2  sin( -  )  sin(   ) sin( -  ) 
2

1  
 sin( -  ) sin(   ) 

Earth pressure Coefficient = 0.279 (IRC 6-2010 Cl. 217.1 )

Hence, Pressure at base of box = ###
Surcharge Height = ### (IRC 6-2010 Cl. 217.1 )
Pressure on Wall (1.2 x 0.279 x 2 ) = ###

settlement = 40 mm
Spring constant = 250.0 t/m2 per m width
No of Springs to be provided = 10 Nos
spring constant at end supports = 12.5 t/m depth per m width
spring constant at intermediate supports (adjacent to end support) = ### t/m depth per m width
spring constant at intermediate supports = ### t/m depth per m width

0.000
1.071 t
0.80 m 1.600 m
0.89m

0.67 m

0.893 t/m 0.67 t/m 0.67 t/m 0.89 t/m

Earth Surcharge 1.300 m Surcharge Earth
Pressure Pressure Pressure Pressure

DL+SIDL
STAAD PLANE FRAME ANALYSIS FOR DRAIN OF SIZE 1.3 X 1.6
UNITS MTONS METERS
JOINT COORDINATES
1 0.00 0.00 0.00
2 1.300 0.00 0.00
4 0.00 1.600 0.00
3 1.300 1.600 0.00
5 0.100 0.00 0.00
6 1.200 0.00 0.00
7 1.300 0.100 0.00
8 0.00 0.100 0.00
9 0.257 0.00 0.00
10 0.414 0.00 0.00
11 0.571 0.00 0.00
12 0.729 0.00 0.00
13 0.886 0.00 0.00
14 1.043 0.00 0.00
MEMBER INCIDENCES
148
281
315
459
5 9 10
6 10 11
7 11 12
8 12 13
9 13 14
10 14 6
11 6 2
12 7 2
13 3 7
MEMBER PROPERTIES
DESIGN OF BOX TYPE DRAIN
H K Toll Road Pvt. Ltd.
REVISION : R0
Detailed Design for 6 loaning of Hosur- Krishnagiri Section of NH-7

3 11 PRIS YD 0.2 ZD 1.0

4 to 10 PRIS YD 0.2 ZD 1.0

DESIGN OF BOX TYPE DRAIN

H K Toll Road Pvt. Ltd.
REVISION : R0
Detailed Design for 6 loaning of Hosur- Krishnagiri Section of NH-7

1 13 PRIS YD 0.2 ZD 1.0

2 12 PRIS YD 0.2 ZD 1.0
CONSTANTS
E CONCRETE ALL
POISSON CONCRETE ALL
SUPPORTS
1 2 FIXED BUT FX FZ MX MY MZ KFY 12.500
5 6 FIXED BUT FX FZ MX MY MZ KFY 32.143
9 TO 14 FIXED BUT FX FZ MX MY MZ KFY 39.286
LOAD 1 DEAD LOADS
MEMBER LOADS
3 TO 11 UNI GY -0.500
3 CONC GY -0.000 0.100
11 CONC GY -0.000 0.000
1 13 CONC GY -0.750
LOAD 2 EARTH PRESSURES
MEMBER LOADS
1 TRAP GX 0 0.837
2 TRAP GX 0.837 0.893
13 TRAP GX 0 -0.837
12 TRAP GX -0.837 -0.893
1 TO 2 UNI GX 0.670
12 TO 13 UNI GX -0.670
LOAD COMB 3 LOAD COMBINATION
1 1.0 2 1.0
PERFORM ANALYSIS
PRINT ANALYSIS RESULTS
PRINT FORCE ENVELOPE NS 10
FINISH

2 ANALYSIS RESULTS

Description Base Slab Walls

Sl. No.
Moment-tm SF-d dist-t Moment-tm SF-d dist-t
1 Dead Load+Earth Pressures 1.17 0.72 1.07 1.63

3 DESIGN OF DRAIN
Design constants
Grade of Concrete M
= 20
Allowable Bending Stress (scbc) 6
=.67 MPa
Grade of steel F
=e 500
Allowable stress in Steel 2
=40 MPa
modular Ratio (m) 1
=0
Neutral Axis depth factor (h) 0
=.217
Leverarm factor (j) 0
=.928
Moment of Resistance factor (Q) 0
=.67 MPa

a) DESIGN OF BASE SLAB

Total moment on base slab due to Moment-tm Shear-t MAX Moment with impact-tm
DL+Earth pressures 1.17 0.72
Net maximum moment on base slab = 1.17 t-m
Hence, Effective Depth required = 131.9 mm
Total Depth Provided = 200 mm
Effective Cover = 55 mm
Hence, Effective Depth provided = 145 mm > Required, Hence, OK
Area of steel to be provided = 362.16 mm²
Minimum area of steel = 0.12% = 174.00 mm²
Provide TOR 10 dia @ 150 mm c/c 523 mm² Percent = 0.36 %
Shear check
Max. SF = 0.72 t
Shear Stress = 0.050MPa
For this percentage of steel, the allowable shear stress from table 11B of Amendments to IRC:21-1987
= #NAME?
#NAME?

Distribution reinforcement = .2 DL Moment

= 0.23 t-m
Ast = 74.49 mm²
Provide 8 dia @ @ 674mm Provide @ 200mm

DESIGN OF BOX TYPE DRAIN

H K Toll Road Pvt. Ltd.
REVISION : R0
Detailed Design for 6 loaning of Hosur- Krishnagiri Section of NH-7

b) DESIGN OF WALLS

Total moment on wall due to Moment-tm Shear-t Max Moment-tm

DL+Earth pressures 1.07 1.63

Net maximum moment on walls = 1.07 t-m

Hence, Effective Depth required = 126 mm
Total Depth Provided = 200 mm
Effective Cover = 55 mm
Hence, Effective Depth provided = 145 mm > Required, Hence, OK
Area of steel to be provided = 330.87 mm²
Minimum area of steel = 0.12% = 174.00 mm²

Provide TOR 10 dia @ 150 mm c/c 523 mm² Percent = 0.36 %

Shear check
Max. SF = 1.63 t
Shear Stress = 0.113MPa
For this percentage of steel, the allowable shear stress from table 11B of Amendments to IRC:21-1987
= #NAME?
#NAME?

Distribution reinforcement = .2 DL Moment

= 0.21 t-m
Ast = 68.05 mm²
Provide 8 dia @ @ 738mm Provide @ 200mm

c) DESIGN OF TOP SLAB

Thickness of Top Slab = 150 mm

UDL of Top Slab = 0.375 t/m
Footpath Live Load as per IRC:6-2010 = 0.400 t/m
Total Load = 0.775 t/m
Span of Slab = 1.10 m
Bending Moment = 0.117 t-m
Effective Depth Required = 41.8 mm
Total Depth Provided = 150 mm
Effective Cover = 50 mm
Effective Depth Provided = 100 mm > Required, Hence, OK
Area of steel to be provided = 52.66 mm²
Minimum area of steel = 0.12% = 120.00 mm²

Provide TOR 10 dia @ 150 mm c/c 523 mm² Percent = 0.52 %

Distribution reinforcement = .2 DL Moment

= 0.02 t-m
Ast = 10.97 mm²
Provide 8 dia @ @ 4580mm Provide @ 200mm

DESIGN OF BOX TYPE DRAIN

H K Toll Road Pvt. Ltd.
REVISION : R0
 DESIGN OF DRAIN
0.60 m x 1.000 m

1.100 m
1.00 m 1.200 m
0.20 m 0.200 m
0.60 m Drain Base Width (Clear)
Drain Height (Clear)
Wall Thickness
Base Thickness
0.200 m Top Slab Thickness
1.000 m
0.400 m 0.400 m

0.800 m

Self weight of Earth = 2.00t/m3

Self weight of Concrete = 2.50t/m3 (IRC: 6 - 2010)

Grade of Concrete = M 25
Allowable Bending Stress scbc = 8.33 MPa (Table 9 IRC 21-2000)
Grade of steel = Fe 500
Allowable stress in Steel = 240 MPa (Table 10 IRC 21-2000)
Modular Ratio m = 10 (Note 1Table 9 IRC 21-2000)
n Neutral Axis depth factor = 0.258
j Leverarm factor = 0.914
Q Moment of Resistance factor = = 0.98 MPa

1 LOAD CALCULATION

1) Dead load

Wall
UDL of Vertical Walls 0.2 x 2.5 = in t/sq. m = = 0.5
Height of wall = 1.00 m
Weight of wall = 0.500 t/m

Base slab
UDL of Base Slab = 0.2 x 2.5 = 0.5
Length of slab = 1.00 m
Load = 0.50 t/m

0.100 m 0.100 m

0.800 m 1.100 m

0.50 t 0.50 t

0.000 t 0.000 t
0.50 t/m

Feedback Infra Privet Limited

2) Earth Pressure

Density of Soil = 2.0 t/m3

Angle of Internal Friction = 30 º
Surcharge Angle b = 0º
Wall Angle a = 90 º
SBC = 10 t/m2
Angle of Wall Friction d = 20 º
sin2 (   ) cos 1
Ka  x
sin2  sin( -  )  sin(   ) sin( -  ) 
2

1  
 sin( -  ) sin(   ) 

Earth pressure Coefficient = 0.279 (IRC 6-2010 Cl. 217.1 )

Hence, Pressure at base of box = ###
Surcharge Height = ### (IRC 6-2010 Cl. 217.1 )
Pressure on Wall (1.2 x 0.279 x 2 ) = ###

settlement = 40 mm
Spring constant = 250.0 t/m2 per m width
No of Springs to be provided = 10 Nos
spring constant at end supports = 12.5 t/m depth per m width
spring constant at intermediate supports (adjacent to end support) = ### t/m depth per m width
spring constant at intermediate supports = ### t/m depth per m width

0.000
0.737 t
0.55 m 1.100 m
0.61m

0.46 m

0.614 t/m 0.67 t/m 0.67 t/m 0.61 t/m

Earth Surcharge 0.800 m Surcharge Earth
Pressure Pressure Pressure Pressure

DL+SIDL
STAAD PLANE FRAME ANALYSIS FOR DRAIN OF SIZE 0.8 X 1.1
UNITS MTONS METERS
JOINT COORDINATES
1 0.00 0.00 0.00
2 0.800 0.00 0.00
4 0.00 1.100 0.00
3 0.800 1.100 0.00
5 0.100 0.00 0.00
6 0.700 0.00 0.00
7 0.800 0.100 0.00
8 0.00 0.100 0.00
9 0.186 0.00 0.00
10 0.271 0.00 0.00
11 0.357 0.00 0.00
12 0.443 0.00 0.00
13 0.529 0.00 0.00
14 0.614 0.00 0.00
MEMBER INCIDENCES
148
281
315
459
5 9 10

Feedback Infra Privet Limited

6 10 11
7 11 12
8 12 13
9 13 14

Feedback Infra Privet Limited

 10 14 6
11 6 2
12 7 2
13 3 7
MEMBER PROPERTIES
3 11 PRIS YD 0.2 ZD 1.0
4 to 10 PRIS YD 0.2 ZD 1.0
1 13 PRIS YD 0.2 ZD 1.0
2 12 PRIS YD 0.2 ZD 1.0
CONSTANTS
E CONCRETE ALL
POISSON CONCRETE ALL
SUPPORTS
1 2 FIXED BUT FX FZ MX MY MZ KFY 12.500
5 6 FIXED BUT FX FZ MX MY MZ KFY 23.214
9 TO 14 FIXED BUT FX FZ MX MY MZ KFY 21.429
LOAD 1 DEAD LOADS
MEMBER LOADS
3 TO 11 UNI GY -0.500
3 CONC GY -0.000 0.100
11 CONC GY -0.000 0.000
1 13 CONC GY -0.500
LOAD 2 EARTH PRESSURES
MEMBER LOADS
1 TRAP GX 0 0.558
2 TRAP GX 0.558 0.614
13 TRAP GX 0 -0.558
12 TRAP GX -0.558 -0.614
1 TO 2 UNI GX 0.670
12 TO 13 UNI GX -0.670
LOAD COMB 3 LOAD COMBINATION
1 1.0 2 1.0
PERFORM ANALYSIS
PRINT ANALYSIS RESULTS
PRINT FORCE ENVELOPE NS 10
FINISH

2 ANALYSIS RESULTS

Description Base Slab Walls

Sl. No.
Moment-tm SF-d dist-t Moment-tm SF-d dist-t
1 Dead Load+Earth Pressures 0.49 0.46 0.43 0.95

3 DESIGN OF DRAIN
Design constants
Grade of Concrete M
= 25
Allowable Bending Stress (s cbc) 8
=.33 MPa
Grade of steel F
=e 500
Allowable stress in Steel 2
=40 MPa
modular Ratio (m) 1
=0
Neutral Axis depth factor (h ) 0
=.258
Leverarm factor (j) 0
=.914
Moment of Resistance factor (Q) 0
=.98 MPa

a) DESIGN OF BASE SLAB

Total moment on base slab due to Moment-tm Shear-t MAX Moment with impact-tm
DL+Earth pressures 0.49 0.46
Net maximum moment on base slab = 0.49 t-m
Hence, Effective Depth required = 70.3 mm
Total Depth Provided = 200 mm
Effective Cover = 30 mm
Hence, Effective Depth provided = 170 mm > Required, Hence, OK

Feedback Infra Privet Limited

Area of steel to be provided = 130.04 mm²
Minimum area of steel = 0.12% = 204.00 mm²
Provide TOR 10 dia @ 150 mm c/c 523 mm² Percent =

Feedback Infra Privet Limited

 Shear check
Max. SF = 0.46 t
Shear Stress = 0.027MPa
For this percentage of steel, the allowable shear stress from table 11B of Amendments to IRC:21-1987
= #NAME?
#NAME?

Distribution reinforcement = .2 DL Moment

= 0.10 t-m
Ast = 26.64 mm²
Provide 8 dia @ @ 1886mm Provide @ 200mm

b) DESIGN OF WALLS

Total moment on wall due to Moment-tm Shear-t Max Moment-tm

DL+Earth pressures 0.43 0.95

Net maximum moment on walls = 0.43 t-m

Hence, Effective Depth required = 66 mm
Total Depth Provided = 200 mm
Effective Cover = 55 mm
Hence, Effective Depth provided = 145 mm > Required, Hence, OK
Area of steel to be provided = 134.55 mm²
Minimum area of steel = 0.12% = 174.00 mm²

Provide TOR 10 dia @ 150 mm c/c 523 mm² Percent =

Shear check
Max. SF = 0.95 t
Shear Stress = 0.065MPa
For this percentage of steel, the allowable shear stress from table 11B of Amendments to IRC:21-1987
= #NAME?
#NAME?

Distribution reinforcement = .2 DL Moment

= 0.09 t-m
Ast = 27.67 mm²
Provide 8 dia @ @ 1815mm Provide @ 200mm

c) DESIGN OF TOP SLAB

Thickness of Top Slab = 150 mm

UDL of Top Slab = 0.375 t/m
Footpath Live Load as per IRC:6-2010 = 0.400 t/m
Total Load = 0.775 t/m
Span of Slab = 0.60 m
Bending Moment = 0.035 t-m
Effective Depth Required = 18.8 mm
Total Depth Provided = 150 mm
Effective Cover = 50 mm
Effective Depth Provided = 100 mm > Required, Hence, OK
Area of steel to be provided = 15.90 mm²
Minimum area of steel = 0.12% = 120.00 mm²

Provide TOR 10 dia @ 150 mm c/c 523 mm² Percent =

Distribution reinforcement = .2 DL Moment

= 0.01 t-m
Ast = 3.31 mm²
Provide 8 dia @ @ 15170mm Provide @ 200mm

Feedback Infra Privet Limited

DESIGN OF DRAIN

0.60 m
1.00 m
0.20 m
0.20 m
0.15 m

(Table 9 IRC 21-2000)

(Table 10 IRC 21-2000)

(Note 1Table 9 IRC 21-2000)

Feedback Infra Privet Limited

(IRC 6-2010 Cl. 217.1 )

(IRC 6-2010 Cl. 217.1 )

Feedback Infra Privet Limited

Feedback Infra Privet Limited
0.31 %

Feedback Infra Privet Limited

0.36 %

0.52 %

Feedback Infra Privet Limited

 DESIGN OF DRAIN
1.10 m x 1.000 m

1.100 m
1.00 m 1.200 m
0.20 m 0.200 m
1.10 m Drain Base Width (Clear)
Drain Height (Clear)
Wall Thickness
Base Thickness
0.200 m Top Slab Thickness
1.500 m
0.650 m 0.650 m

1.300 m

Self weight of Earth = 2.00t/m3

Self weight of Concrete = 2.50t/m3 (IRC: 6 - 2010)

Grade of Concrete = M 25
Allowable Bending Stress scbc = 8.33 MPa (Table 9 IRC 21-2000)
Grade of steel = Fe 500
Allowable stress in Steel = 240 MPa (Table 10 IRC 21-2000)
Modular Ratio m = 10 (Note 1Table 9 IRC 21-2000)
n Neutral Axis depth factor = 0.258
j Leverarm factor = 0.914
Q Moment of Resistance factor = = 0.98 MPa

1 LOAD CALCULATION

1) Dead load

Wall
UDL of Vertical Walls 0.2 x 2.5 = in t/sq. m = = 0.5
Height of wall = 1.00 m
Weight of wall = 0.500 t/m

Base slab
UDL of Base Slab = 0.2 x 2.5 = 0.5
Length of slab = 1.50 m
Load = 0.75 t/m

0.100 m 0.100 m

1.300 m 1.100 m

0.50 t 0.50 t

0.000 t 0.000 t
0.50 t/m

Feedback Infra Privet Limited

2) Earth Pressure

Density of Soil = 2.0 t/m3

Angle of Internal Friction = 30 º
Surcharge Angle b = 0º
Wall Angle a = 90 º
SBC = 10 t/m2
Angle of Wall Friction d = 20 º
sin2 (   ) cos 1
Ka  x
sin2  sin( -  )  sin(   ) sin( -  ) 
2

1  
 sin( -  ) sin(   ) 

Earth pressure Coefficient = 0.279 (IRC 6-2010 Cl. 217.1 )

Hence, Pressure at base of box = ###
Surcharge Height = ### (IRC 6-2010 Cl. 217.1 )
Pressure on Wall (1.2 x 0.279 x 2 ) = ###

settlement = 40 mm
Spring constant = 250.0 t/m2 per m width
No of Springs to be provided = 10 Nos
spring constant at end supports = 12.5 t/m depth per m width
spring constant at intermediate supports (adjacent to end support) = ### t/m depth per m width
spring constant at intermediate supports = ### t/m depth per m width

0.000
0.737 t
0.55 m 1.100 m
0.61m

0.46 m

0.614 t/m 0.67 t/m 0.67 t/m 0.61 t/m

Earth Surcharge 1.300 m Surcharge Earth
Pressure Pressure Pressure Pressure

DL+SIDL
STAAD PLANE FRAME ANALYSIS FOR DRAIN OF SIZE 1.3 X 1.1
UNITS MTONS METERS
JOINT COORDINATES
1 0.00 0.00 0.00
2 1.300 0.00 0.00
4 0.00 1.100 0.00
3 1.300 1.100 0.00
5 0.100 0.00 0.00
6 1.200 0.00 0.00
7 1.300 0.100 0.00
8 0.00 0.100 0.00
9 0.257 0.00 0.00
10 0.414 0.00 0.00
11 0.571 0.00 0.00
12 0.729 0.00 0.00
13 0.886 0.00 0.00
14 1.043 0.00 0.00
MEMBER INCIDENCES
148
281
315
459
5 9 10

Feedback Infra Privet Limited

6 10 11
7 11 12
8 12 13
9 13 14

Feedback Infra Privet Limited

 10 14 6
11 6 2
12 7 2
13 3 7
MEMBER PROPERTIES
3 11 PRIS YD 0.2 ZD 1.0
4 to 10 PRIS YD 0.2 ZD 1.0
1 13 PRIS YD 0.2 ZD 1.0
2 12 PRIS YD 0.2 ZD 1.0
CONSTANTS
E CONCRETE ALL
POISSON CONCRETE ALL
SUPPORTS
1 2 FIXED BUT FX FZ MX MY MZ KFY 12.500
5 6 FIXED BUT FX FZ MX MY MZ KFY 32.143
9 TO 14 FIXED BUT FX FZ MX MY MZ KFY 39.286
LOAD 1 DEAD LOADS
MEMBER LOADS
3 TO 11 UNI GY -0.500
3 CONC GY -0.000 0.100
11 CONC GY -0.000 0.000
1 13 CONC GY -0.500
LOAD 2 EARTH PRESSURES
MEMBER LOADS
1 TRAP GX 0 0.558
2 TRAP GX 0.558 0.614
13 TRAP GX 0 -0.558
12 TRAP GX -0.558 -0.614
1 TO 2 UNI GX 0.670
12 TO 13 UNI GX -0.670
LOAD COMB 3 LOAD COMBINATION
1 1.0 2 1.0
PERFORM ANALYSIS
PRINT ANALYSIS RESULTS
PRINT FORCE ENVELOPE NS 10
FINISH

2 ANALYSIS RESULTS

Description Base Slab Walls

Sl. No.
Moment-tm SF-d dist-t Moment-tm SF-d dist-t
1 Dead Load+Earth Pressures 0.48 0.49 0.43 0.95

3 DESIGN OF DRAIN
Design constants
Grade of Concrete M
= 25
Allowable Bending Stress (scbc) 8
=.33 MPa
Grade of steel F
=e 500
Allowable stress in Steel 2
=40 MPa
modular Ratio (m) 1
=0
Neutral Axis depth factor (h) 0
=.258
Leverarm factor (j) 0
=.914
Moment of Resistance factor (Q) 0
=.98 MPa

a) DESIGN OF BASE SLAB

Total moment on base slab due to Moment-tm Shear-t MAX Moment with impact-tm
DL+Earth pressures 0.48 0.49
Net maximum moment on base slab = 0.48 t-m
Hence, Effective Depth required = 70.1 mm
Total Depth Provided = 200 mm
Effective Cover = 30 mm
Hence, Effective Depth provided = 170 mm > Required, Hence, OK

Feedback Infra Privet Limited

Area of steel to be provided = 129.51 mm²
Minimum area of steel = 0.12% = 204.00 mm²
Provide TOR 10 dia @ 150 mm c/c 523 mm² Percent =

Feedback Infra Privet Limited

 Shear check
Max. SF = 0.49 t
Shear Stress = 0.029MPa
For this percentage of steel, the allowable shear stress from table 11B of Amendments to IRC:21-1987
= #NAME?
#NAME?

Distribution reinforcement = .2 DL Moment

= 0.10 t-m
Ast = 26.53 mm²
Provide 8 dia @ @ 1894mm Provide @ 200mm

b) DESIGN OF WALLS

Total moment on wall due to Moment-tm Shear-t Max Moment-tm

DL+Earth pressures 0.43 0.95

Net maximum moment on walls = 0.43 t-m

Hence, Effective Depth required = 66 mm
Total Depth Provided = 200 mm
Effective Cover = 55 mm
Hence, Effective Depth provided = 145 mm > Required, Hence, OK
Area of steel to be provided = 134.55 mm²
Minimum area of steel = 0.12% = 174.00 mm²

Provide TOR 10 dia @ 150 mm c/c 523 mm² Percent =

Shear check
Max. SF = 0.95 t
Shear Stress = 0.065MPa
For this percentage of steel, the allowable shear stress from table 11B of Amendments to IRC:21-1987
= #NAME?
#NAME?

Distribution reinforcement = .2 DL Moment

= 0.09 t-m
Ast = 27.67 mm²
Provide 8 dia @ @ 1815mm Provide @ 200mm

c) DESIGN OF TOP SLAB

Thickness of Top Slab = 150 mm

UDL of Top Slab = 0.375 t/m
Footpath Live Load as per IRC:6-2010 = 0.400 t/m
Total Load = 0.775 t/m
Span of Slab = 1.10 m
Bending Moment = 0.117 t-m
Effective Depth Required = 34.6 mm
Total Depth Provided = 150 mm
Effective Cover = 50 mm
Effective Depth Provided = 100 mm > Required, Hence, OK
Area of steel to be provided = 53.43 mm²
Minimum area of steel = 0.12% = 120.00 mm²

Provide TOR 10 dia @ 150 mm c/c 523 mm² Percent =

Distribution reinforcement = .2 DL Moment

= 0.02 t-m
Ast = 11.13 mm²
Provide 8 dia @ @ 4513mm Provide @ 200mm

Feedback Infra Privet Limited

DESIGN OF DRAIN

1.10 m
1.00 m
0.20 m
0.20 m
0.15 m

(Table 9 IRC 21-2000)

(Table 10 IRC 21-2000)

(Note 1Table 9 IRC 21-2000)

Feedback Infra Privet Limited

(IRC 6-2010 Cl. 217.1 )

(IRC 6-2010 Cl. 217.1 )

Feedback Infra Privet Limited

Feedback Infra Privet Limited
0.31 %

Feedback Infra Privet Limited

0.36 %

0.52 %

Feedback Infra Privet Limited