Vbulletin 5 Connect: Quick Start Guide (Ver 1.0)
Vbulletin 5 Connect: Quick Start Guide (Ver 1.0)
Vbulletin 5 Connect: Quick Start Guide (Ver 1.0)
1
Introduction
Congratulations on successfully installing your new vBulletin site! If this is your first time using
one of our products (or vBulletin 5), this guide will help you get things set up. Let’s begin with a
few definitions.
When you first install your vBulletin, your site loads with the preset style and page like so:
As you can see, it’s already been pre-populated with a page and some modules. A page is
exactly that, a page. It displays your site to users and is a container for modules. Modules are
pieces of functionality that you can add, customize, and, sometimes, remove from a page.
These modules can cover such functionality as displaying ads, to announcements, to videos
and even videos.
Everything in vBulletin 5 is a module of some type. There are two types of modules: normal
modules and system modules. The main difference between the two is that you’re unable to
delete system modules. This is functionality that you wouldn’t want removed from your site to
begin with, such as private messages, advanced search and registration forms.
2
Now that we have the basic terms down for vBulletin 5, we’ll move on to the how they work and
how you can use them, starting with creating pages.
3
Table of Content
Introduction
Editing and Creating Pages
Add Modules Tab
Change Layout Tab
Select Template Tab
Color Style Tab
Saving the Changes
Adding a Page
Linking to the a New Page
Creating Your First Forum and Subforum
Adding a Forum
Creating a Category
Adding a Sub-Forum
Creating a Private Forum
Setting Up User Registration
Setting Up Human Verification
FAQ
How do I change my username?
How do I change my password?
How do I change my logo?
How do I change the default style?
How do I add my own ads?
4
Editing and Creating Pages
You can edit all default pages in addition to adding more pages to meet the needs of your site.
In order to edit an existing page, activate the Site Builder by click on the the Off button in the
upper right hand corner of your navigation bar.
Once you’ve activated the Site Builder function1, navigate to the page that you want to edit and
click Edit Page button.
● Activity Stream - A module that tracks and displays the activity on your board. Also
contains the directory for any channels created on the page.
● Ad - A module that organizes and rotates the ads on a site.
● Announcement - A module that manages and displays announcements and notices to
your users.
● Container Module - A module that other modules are moved into so regular users can
interact with them but moving or minimizing its contents.
● Online Users - A modules that displays the number of users online at any given time.
1You’ll be asked to re-enter your password for security purposes. Using Site Builder will change the look
and feel of your site dramatically and this is to ensure that no one, but you, can do this.
5
● PHP - A module that displays PHP entered in it.
● Search - A module that displays a customized set of search results as a feed.
● Static HTML - A module that displays custom HTML.
● Tag Cloud - A module that displays a clickable list of tags used on the site.
● Today’s Birthday - A module that displays the usernames of user’s with birthdays on
any given day.
● Top Active Users - A module that displays a list of the top active users.
● Video - A module that embeds a video on to a page.
To put a module on a page, click and drag it from the menu onto the page itself. You can use
the same method to rearrange the order of the modules on a page. To delete a module, click on
the trash can icon to the right of the module title. To edit the module, click on the pencil. A form
will open similar to the one below:
A number of fields will be available in the form for you to edit and change. To save the changes
you have made for the module, click on the Save button at the bottom of the page.
For more information on what the options for each module does, visit our online help at: https://www.vbulletin.com/
docs/html/sitebuilder_modulelist
6
The Change Layout Tab is the second of the four tabs. This controls the number of columns on
a page and the percentage of space each column takes up.
Templates are the saved designs for the default pages and any pages that you create. This can
be especially helpful when you have several pages using the same template that requires a
change that affects them all.
7
The Color Style Tab allows you to the limited ability to change the style for the page you’ve
selected. Using a combination of the color wheel and the My Color Palette, you have a limited
control over how the page looks like. A preview of the page will appear beneath the form and
the save button in the left hand column allows you to save the Style you’ve created to reuse at a
later date.
Once you’re finished modifying the page, click on the Save Page button to the right of the tabs.
It opens a confirmation form where you have the option of saving the page as a new Template
or overwriting the existing Template.
8
If you choose to overwrite the existing Template, you won’t be able to retrieve the old design if
you want to switch back at a later time.
Adding a Page
To add a page to your site, follow the same steps as we listed at the top of this section, but!
Instead of clicking on the Edit Page button, click on the New Page button instead.
Decide if you want the link to be a main navigation item or a sub-navigation item. If the link is
a sub-navigation item, click on the carat to the far right of the main navigation item you want it
nested beneath. Click either the New Navigation Item or the New Sub Navigation Item.
9
Enter in the name of the link in the Navigation Item Name field and then paste the address
your copied into the Target URL before clicking the Save button. Once that’s one, your link will
appear in column it was added to. To change it’s position, click and drag it to its new location.
Finally, click Save Changes and confirm your changes. If you do not take this step, the changes
will be lost.
10
Creating Your First Forum and Subforum
Your vBulletin installation comes with a pre-generated forum. To add more forums, turn on your
Site Builder and click on the Page Manager button. This opens a form like the one below:
Adding a Forum
From here, enter the name of the of forum you want to create in the New Forum text box and
click Add. It will appear beneath the pre-generated Main Forum. You can change it’s position by
clicking on the dotted strip to the left of the forum name and dragging it to its new location.
If you want to delete the forum, click the red x icon to the right of the plus symbol. A confirmation
popup will appear. Clicking Yes will complete the deletion. Be careful of which forums you
delete, since any threads, posts, and replies in that forum will be removed along with its parent.
Creating a Category
A category is a container for forums and largely used to organize the forums into, well, different
categories. To make a category, click on the Make Category link to the right of the forum you
wish to be a category. It will be instantly changed to a category. If you want to change it back,
just click the Make Forum link that has taken it’s place. It’s that simple.
Adding a Sub-Forum
Sub-forums are forums that are nested in parent forums. Usually, this is used to create an area
for specific aspects of the topic covered by the larger forum to be discussed. If you want to
create sub-forum, click on the plus symbol between the Make Category link and the red x icon.
A field such as as the one below will appear:
11
Enter the name of the new forum in the field that reads New Channel before clicking away from
the sub-forum. It’s that simple.
12
Creating a Private Forum
Now that you have your forums set up, you might want to change the permissions on them.
Permissions tell the system which users get to see what. By using permissions, you can create
a private forum for your users to use.2
To do this, click on the AdminCP button in the upper right hand corner of the Site Builder
menu.
Please note, you may be asked to log in again for the same reasons that you had to provide
your password a second time. The window will reload to a page similar to this:
Scroll down to the Channel Management header and click it. Select the Channel Permissions
option and click it.
13
This will reload the frame to the right with a form like this:
Select the Edit link beside the usergroup you want to hide the forum from. This will open
another form with several options:
14
Find the froum_permissions header and change the Can View Forum setting to No before
clicking Save. The usergroup that you selected will no longer be able to see that forum.
15
16
Setting Up User Registration
With everything set up for your site, it’s now time to take a look at your User Registration
settings. Stay in the AdminCP and click on the Settings header, followed by the Options link.
Once the vBulletin Options form loads, select the User Registration Options from the scrolling
list and click the Edit Settings button:
17
This controls every aspect of user registration for your site. It includes everything from whether
or not it’s turned on, to COPPA Registration, to Welcome Messages. For a full list of options and
what they do, go to:
https://www.vbulletin.com/docs/html/main/acp_settings_options_userregistration
18
Setting Up Human Verification
There are some sections of the site and its functionality that you’ll want to have human
verification for. To turn on Human Verification, click on the Settings header in the AdminCP,
followed by the Options link.
Once the vBulletin Options form loads, select the Human Verification Options from the
scrolling list and click the Edit Settings button:
19
Checking an option will activate it, while unchecking the option will deactivate it. This means
that any usergroup that has the option Require Human Verification on Configure Actions
activated will need to verify that they’re human when interacting with the selected options. Once
you’re done, click Save and the changes you’ve made will be applied to the site.
20
FAQ
How do I change my username?
To change your username, login to the AdminCP and click on the Users header. In the
menu, click on Search for Users. In the new form in the frame to the right, enter your current
username in to the User Name field and click the Exact Match button. In the User Form,
change the username in the User Name field and click Save.
Once you’re done, click the Save button on the Ad form and confirm the changes on the page
by clicking the Save Page button. The ads should now appear where you placed them.
21