Concrete Mixer Hydrostatic Transmission

www.psm-hydraulics.com

Below is presented the group of hydrostatic transmission to be applied in mobile truck-mounted concrete mixer with nominal
capacity 7-10 mc.

The group consists of the following hydraulic machines:

Variable displacement swash-plate pump 416 series

+
Fixed displacement bent-axis motor 310 series
or
Variable displacement swash-plate pump 416 series
+
Fixed displacement bent-axis motor 410 series

2
 Concrete Mixer Hydrostatic Transmission

www.psm-hydraulics.com

Circuit diagram
Pump 416.0.90 Motor 310.4.80 or 310.4.112 or 410.0.107

Control mechanism

Loop flushing valve

A1 G Fa Fe R R

Charge pump
Servo piston
Motor

Main pump

Charge pressure
relief valve
Cut off valve

B1 S T1 T2 T1
Pressure relief valve Loop flushing relief valve
Oil tank

3
 Concrete Mixer Hydrostatic Transmission

www.psm-hydraulics.com

Pump 416.0.90
Servo control

Piston

Servo Cylinder Cylinder block

Swash Plate Valve Plate

Input Shaft Charge Pump

4
 Concrete Mixer Hydrostatic Transmission

www.psm-hydraulics.com

Pump dimensions with SAE “C” mounting flange

5
 Concrete Mixer Hydrostatic Transmission

www.psm-hydraulics.com

Pump dimensions with SAE “D” mounting flange

6
 Concrete Mixer Hydrostatic Transmission

www.psm-hydraulics.com

Pump technical data

Max. displacement, ccm 90
Speed, rpm
- minimum speed 500
- nominal speed 2000
- maximal speed 3050
- peak speed 3300
Flow, l/min
- nominal flow 171
- maximal flow 260.8
Pressure, bar
- maximal pressure 400
- peak pressure 450
Max. power (at 400 bar, 3050 rpm), kW 195
Weight, kg 67

Order code:
Pump designation Mounting flange Shaft end Rotation Analogue
416.0.90.L.Y2.S3.F22.P.N.F1.NN.NBR SAE “C” splined 23T 16/32 pitch left SPV23 Sauer-Danfoss
416.0.90.R.Y2.S3.F22.P.N.F1.NN.NBR SAE “C” splined 23T 16/32 pitch right SPV23 Sauer-Danfoss
416.0.90.L.Y2.S2.F22.P.N.F1.NN.NBR SAE “C” splined 21T 16/32 pitch left SPV23 Sauer-Danfoss
416.0.90.R.Y2.S2.F22.P.N.F1.NN.NBR SAE “C” splined 21T 16/32 pitch right SPV23 Sauer-Danfoss
416.0.90.L.Y3.A4.F33.P.N.F1.NN.NBR SAE “D” W45x2x30x21x9g DIN 5480 left A4VG90 Bosch-Rexroth
416.0.90.R.Y3.A4.F33.P.N.F1.NN.NBR SAE “D” W45x2x30x21x9g DIN 5480 right A4VG90 Bosch-Rexroth
416.0.90.L.Y3.A2.F33.P.N.F1.NN.NBR SAE “D” W35x2x30x16x9g DIN 5480 left A4VG90 Bosch-Rexroth
416.0.90.R.Y3.A2.F33.P.N.F1.NN.NBR SAE “D” W35x2x30x16x9g DIN 5480 right A4VG90 Bosch-Rexroth

7
 Concrete Mixer Hydrostatic Transmission

www.psm-hydraulics.com

Motors of 310.4 series

Output Shaft Cylinder Block

Valve Plate

Loop Flushing Relief Valve

Loop Flushing Valve

8
 Concrete Mixer Hydrostatic Transmission

www.psm-hydraulics.com

Motor 310.4.80 dimensions. ISO 3019/2 mounting flange.

9
 Concrete Mixer Hydrostatic Transmission

www.psm-hydraulics.com

Motor 310.4.112 dimensions. ISO 3019/2 mounting flange.

10
 Concrete Mixer Hydrostatic Transmission

www.psm-hydraulics.com

Motor 310.4.112 dimensions. With adaptor to SAE “C” mounting flange.

11
 Concrete Mixer Hydrostatic Transmission

www.psm-hydraulics.com

Motor 310.4.112 Technical data.

Displacement, ccm 80 112

Speed, rpm
- minimal speed 50 50
- nominal speed 1500 1500
- maximal speed 3350 3000
Flow, l/min
- nominal flow 126.3 176.8
- maximal flow 282.1 353.6
Pressure, bar
- maximal pressure 400 400
- peak pressure 450 450
Max. power (at 400 bar), kW 169,2 212.2
Maximal torque (at 400 bar), Nm 458.4 641.7
Weight, kg 19.2 29

Order code

Motor designation Mounting flange Shaft end Analogue

310.4.80.00.78.NBR ISO 3019/2 W40x2x30x18x9g DIN 5480 A2F80 Bosch-Rexroth
310.4.112.00.78.NBR ISO 3019/2 W40x2x30x18x9g DIN 5480 A2F112 Bosch-Rexroth
1)
310.4.112.0A.78.NBR SAE “C” splined 23T 16/32 pitch SMF23 Sauer-Danfoss
1)
310.4.112.0C.78.NBR SAE “C” splined 21T 16/32 pitch SMF23 Sauer-Danfoss
1)
- need to order flange adaptor in complete with the motor

12
 Concrete Mixer Hydrostatic Transmission

www.psm-hydraulics.com

Motor 410.0.107

Output Shaft

Cylinder Block

Valve Plate

Loop Flushing Relief Valve

Loop Flushing Valve

13
 Concrete Mixer Hydrostatic Transmission

www.psm-hydraulics.com

Motor 410.0.107 dimensions. ISO 3019/2 mounting flange.

14
 Concrete Mixer Hydrostatic Transmission

www.psm-hydraulics.com

Motor 410.0.107 dimensions. With adaptor to SAE “C” mounting flange.

15
 Concrete Mixer Hydrostatic Transmission

www.psm-hydraulics.com

Motor 410.0.107 Technical data.

Displacement, ccm 106.7

Speed, rpm
- minimal speed 50
- nominal speed 1500
- maximal speed 3000
Flow, l/min
- nominal flow 168.5
- maximal flow 337
Pressure, bar
- maximal pressure 400
- peak pressure 450
Max. power (at 400 bar), kW 202.7
Maximal torque (at 400 bar), Nm 611.3
Weight, kg 32

Order code

Motor designation Mounting flange Shaft end Analogue

410.0.107.W.A4.F21.NN.NBR ISO 3019/2 W45x2x30x21x9g DIN 5480 A2FM107 Bosch-Rexroth
410.0.107.W.A3.F21.NN.NBR ISO 3019/2 W40x2x30x18x9g DIN 5480 A2FM107 Bosch-Rexroth
410.0.107.W.S3.F21.NN.NBR 1) SAE “C” splined 23T 16/32 pitch SMF23 Sauer-Danfoss
410.0.107.W.S2.F21.NN.NBR 1) SAE “C” splined 21T 16/32 pitch SMF23 Sauer-Danfoss
1)
- need to order flange adaptor in complete with the motor

16
 Concrete Mixer Hydrostatic Transmission

www.psm-hydraulics.com

Product range

Fixed displacement pumps and motors 310 series Fixed displacements motors 410 series
Fixed displacements pumps 411 series Integrated pump units Variable displacements swash-plate pumps
416 series

Variable displacements motors 303 series Variable displacements motors 403 series Accumulator assembly
Hydraulic pilot control devices
Variable displacements pumps 313 series Variable displacements pumps 413 series

Dear Sirs/Madam,

In case you have any questions, concerning sales, after-sale services, technical
characteristics of manufactured products, please, refer to:

International Trade Department - International Trade Director

Ibadulla Satybalov
8, 1st km Sibirsky trakt
Pilot operated Ekaterinburg, Russia, P.C. 620100
Valve blocks Check valves
check valves E-mail: [email protected]
Tel./fax: +7 (343) 264-66-50, +7 (343) 229-79-83
Hydraulic cartridge valves

17