Scribd Logo
Upload

Welcome to Scribd!

  • 6 views

    PC Mitsubishi

    Uploaded by

    DiegoTierradentro
    TDS

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    PC Mitsubishi

    Uploaded by

    DiegoTierradentro
    6 views1 page
    TDS

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    TDS

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    6 views1 page

    PC Mitsubishi

    Uploaded by

    DiegoTierradentro
    TDS

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    NOVAREX ® M7027BF

    Property Data
    PC

    Properties Typical Data Unit Test Method

    RHEOLOGICAL PROPERTIES

    Melt volume-flow rate 2.3 cm³/10min ISO 1133


    Temperature 300 °C ISO 1133
    Load 1.2 kg ISO 1133
    Molding shrinkage (parallel) 0.6 % ISO 294-4
    Molding shrinkage (normal) 0.6 % ISO 294-4

    MECHANICAL PROPERTIES

    Tensile modulus 2300 MPa ISO 527-1/-2


    Yield stress 62 MPa ISO 527-1/-2
    Yield strain 6 % ISO 527-1/-2
    Nominal strain at break >50 % ISO 527-1/-2
    Flexural modulus 2300 MPa ISO 178
    Flexural strength 93 MPa ISO 178
    Charpy impact strength (+23°C) N kJ/m² ISO 179/1eU
    Charpy notched impact strength (+23°C) 70 kJ/m² ISO 179/1eA

    THERMAL PROPERTIES

    Temp. of deflection under load (1.80 MPa) 129 °C ISO 75-1/-2


    Coeff. of linear therm. expansion (parallel) 0.65 E-4/°C ISO 11359-1/-2
    Coeff. of linear therm. expansion (normal) 0.66 E-4/°C ISO 11359-1/-2

    ELECTRICAL PROPERTIES

    Relative permittivity (100Hz) 3.1 - IEC 60250


    Relative permittivity (1 MHz) 3.1 - IEC 60250
    Dissipation factor (100 Hz) 6 E-4 IEC 60250
    Dissipation factor (1 MHz) 90 E-4 IEC 60250
    Volume resistivity >1E13 Ohm*m IEC 60093
    Surface resistivity >1E15 Ohm IEC 60093
    Electric strength 17 kV/mm IEC 60243-1
    Comparative tracking index (PLC) 2 class UL 746A

    OTHER PROPERTIES

    Density 1200 kg/m³ ISO 1183

    08.11.2012
    All information supplied by or on behalf of Mitsubishi Engineering-Plastics Corporation in relation to its products, whether in the nature of data, recommendations or otherwise, is supported by research and, in good faith,
    believed reliable, but Mitsubishi Engineering-Plastics Corporation assumes no liability and makes no warranties of any kind, express or implied, including, but not limited to, those of title, merchantability, fitness for a particular
    purpose or non-infringement or any warranty arising from a course of dealing, usage, or trade practice whatsoever in respect of application, processing or use made of the aforementioned information or product. The user
    assumes all responsibility for the use of all information provided and shall verify quality and other properties or any consequence from the use of all such information. Typical values are indicative only and are not to be construed
    as being binding specifications.

    You might also like