Microsoft

AZ-104 Exam
Microsoft Azure Administrator Exam
Questions & Answers
Demo
Questions & Answers PDF Page 2

Version: 13.0

Question: 1

You discover that VM3 does NOT meet the technical requirements.
You need to verify whether the issue relates to the NSGs.
What should you use?

A. Diagram in VNet1
B. the security recommendations in Azure Advisor
C. Diagnostic settings in Azure Monitor
D. Diagnose and solve problems in Traffic Manager Profiles
E. IP flow verify in Azure Network Watcher

Answer: E

Explanation:
Scenario: Litware must meet technical requirements including:
Ensure that VM3 can establish outbound connections over TCP port 8080 to the applications servers in
the Montreal office.
IP flow verify checks if a packet is allowed or denied to or from a virtual machine. The information
consists of direction, protocol, local IP, remote IP, local port, and remote port. If the packet is denied by a
security group, the name of the rule that denied the packet is returned. While any source or destination
IP can be chosen, IP flow verify helps administrators quickly diagnose connectivity issues from or to the
internet and from or to the on-premises environment.
References:
https://docs.microsoft.com/en-us/azure/network-watcher/network-watcher-ip-flow-verify-overview
Questions & Answers PDF Page 3

Question: 2

You need to meet the technical requirement for VM4.

What should you create and configure?

A. an Azure Notification Hub

B. an Azure Event Hub
C. an Azure Logic App
D. an Azure services Bus

Answer: B

Explanation:
Scenario: Create a workflow to send an email message when the settings of VM4 are modified.
You can start an automated logic app workflow when specific events happen in Azure resources or third-
party resources. These resources can publish those events to an Azure event grid. In turn, the event grid
pushes those events to subscribers that have queues, webhooks, or event hubs as endpoints. As a
subscriber, your logic app can wait for those events from the event grid before running automated
workflows to perform tasks - without you writing any code.
References:
https://docs.microsoft.com/en-us/azure/event-grid/monitor-virtual-machine-changes-event-grid-logic-
app

Question: 3

You need to recommend a solution to automate the configuration for the finance department users. The
solution must meet the technical requirements.
What should you include in the recommended?

A. Azure AP B2C
B. Azure AD Identity Protection
C. an Azure logic app and the Microsoft Identity Management (MIM) client
D. dynamic groups and conditional access policies

Answer: D

Explanation:
Scenario: Ensure Azure Multi-Factor Authentication (MFA) for the users in the finance department only.
The recommendation is to use conditional access policies that can then be targeted to groups of users,
specific applications, or other conditions.
References:
https://docs.microsoft.com/en-us/azure/active-directory/authentication/howto-mfa-userstates
Questions & Answers PDF Page 4

Question: 4

HOTSPOT
You need to the appropriate sizes for the Azure virtual for Server2.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:
Questions & Answers PDF Page 5

Explanation:
Box 1: Create a Recovery Services vault
Create a Recovery Services vault on the Azure Portal.
Box 2: Install the Azure Site Recovery Provider
Azure Site Recovery can be used to manage migration of on-premises machines to Azure.
Scenario: Migrate the virtual machines hosted on Server1 and Server2 to Azure.
Server2 has the Hyper-V host role.
References:
https://docs.microsoft.com/en-us/azure/site-recovery/migrate-tutorial-on-premises-azure

Question: 5
DRAG DROP
You need to use Azure Automation State Configuration to manage the ongoing consistency of virtual
machine configurations.
Which five actions should you perform in sequence? To answer, move the appropriate action from the
list of actions to the answer area and arrange them in the correct order.
NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct
orders you select.
Questions & Answers PDF Page 6

Answer:

Explanation:
Step 1: Upload a configuration to Azure Automation State Configuration.
Import the configuration into the Automation account.
Step 2: Compile a configuration into a node configuration.
A DSC configuration defining that state must be compiled into one or more node configurations (MOF
Questions & Answers PDF Page 7

document), and placed on the Automation DSC Pull Server.

Step 3: Onboard the virtual machines to Azure Automation State Configuration.
Onboard the Azure VM for management with Azure Automation State Configuration
Step 4: Assign the node configuration
Step 5: Check the compliance status of the node
Each time Azure Automation State Configuration performs a consistency check on a managed node, the
node sends a status report back to the pull server. You can view these reports on the page for that node.
On the blade for an individual report, you can see the following status information for the corresponding
consistency check:
The report status — whether the node is "Compliant", the configuration "Failed", or the node is "Not
Compliant"
References:
https://docs.microsoft.com/en-us/azure/automation/automation-dsc-getting-started

Question: 6
HOTSPOT
You need to meet the connection requirements for the New York office.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:
Box 1: Create a virtual network gateway and a local network gateway.
Azure VPN gateway. The VPN gateway service enables you to connect the VNet to the on-premises
network through a VPN appliance. For more information, see Connect an on-premises network to a
Questions & Answers PDF Page 8

Microsoft Azure virtual network. The VPN gateway includes the following elements:
• Virtual network gateway. A resource that provides a virtual VPN appliance for the VNet. It is
responsible for routing traffic from the on-premises network to the VNet.
• Local network gateway. An abstraction of the on-premises VPN appliance. Network traffic from the
cloud application to the on-premises network is routed through this gateway.
• Connection. The connection has properties that specify the connection type (IPSec) and the key shared
with the on-premises VPN appliance to encrypt traffic.
• Gateway subnet. The virtual network gateway is held in its own subnet, which is subject to various
requirements, described in the Recommendations section below.
Box 2: Configure a site-to-site VPN connection
On premises create a site-to-site connection for the virtual network gateway and the local network
gateway.

Scenario: Connect the New York office to VNet1 over the Internet by using an encrypted connection.
Incorrect Answers:
Azure ExpressRoute: Established between your network and Azure, through an ExpressRoute partner.
This connection is private. Traffic does not go over the internet.
References:
https://docs.microsoft.com/en-us/azure/architecture/reference-architectures/hybrid-networking/vpn

Question: 7
DRAG DROP
You need to prepare the environment to ensure that the web administrators can deploy the web apps as
quickly as possible.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the
list of actions to the answer area and arrange them in the correct order.
Questions & Answers PDF Page 9

Answer:

Explanation
Scenario:
1. Web administrators will deploy Azure web apps for the marketing department.
2. Each web app will be added to a separate resource group.
3. The initial configuration of the web apps will be identical.
4. The web administrators have permission to deploy web apps to resource groups.
Steps:
1 --> Create a resource group, and then deploy a web app to the resource group.
2 --> From the Automation script blade of the resource group , click Add to Library.
3 --> From the Templates service, select the template, and then share the template to the web
administrators .
References:
https://docs.microsoft.com/en-us/azure/azure-resource-manager/templates/quickstart-create-
templates-use-the-portal
Questions & Answers PDF Page 10

Question: 8

Which blade should you instruct the finance department auditors to use?

A. Partner information
B. Overview
C. Payment methods
D. Invoices

Answer: D

Explanation:
You can opt in and configure additional recipients to receive your Azure invoice in an email. This feature
may not be available for certain subscriptions such as support offers, Enterprise Agreements, or Azure in
Open.
Select your subscription from the Subscriptions page. Opt-in for each subscription you own. Click
Invoices then Email my invoice.

Click Opt in and accept the terms.

Scenario: During the testing phase, auditors in the finance department must be able to review all Azure
costs from the past week.
References: https://docs.microsoft.com/en-us/azure/billing/billing-download-azure-invoice-daily-usage-
date

Question: 9

You need to prepare the environment to meet the authentication requirements.

Which two actions should you perform? Each correct answer presents part of the solution.
NOTE Each correct selection is worth one point.
Questions & Answers PDF Page 11

A. Azure Active Directory (AD) Identity Protection and an Azure policy

B. a Recovery Services vault and a backup policy
C. an Azure Key Vault and an access policy
D. an Azure Storage account and an access policy

Answer: BD

Explanation:
D: Seamless SSO works with any method of cloud authentication - Password Hash Synchronization or
Pass-through Authentication, and can be enabled via Azure AD Connect.
B: You can gradually roll out Seamless SSO to your users. You start by adding the following Azure AD URL
to all or selected users' Intranet zone settings by using Group Policy in Active Directory:
https://autologon.microsoftazuread-sso.com
Incorrect Answers:
A: Seamless SSO needs the user's device to be domain-joined, but doesn't need for the device to be
Azure AD Joined.
C: Azure AD connect does not port 8080. It uses port 443.
E: Seamless SSO is not applicable to Active Directory Federation Services (ADFS).
Scenario: Users in the Miami office must use Azure Active Directory Seamless Single Sign-on (Azure AD
Seamless SSO) when accessing resources in Azure.
Planned Azure AD Infrastructure include: The on-premises Active Directory domain will be synchronized
to Azure AD.
References: https://docs.microsoft.com/en-us/azure/active-directory/connect/active-directory-
aadconnect-sso-quick-start

Question: 10

You need to define a custom domain name for Azure AD to support the planned infrastructure.
Which domain name should you use?

A. Join the client computers in the Miami office to Azure AD.

B. Add http://autologon.microsoftazuread-sso.com to the intranet zone of each client computer in the
Miami office.
C. Allow inbound TCP port 8080 to the domain controllers in the Miami office.
D. Install Azure AD Connect on a server in the Miami office and enable Pass-through Authentication
E. Install the Active Directory Federation Services (AD FS) role on a domain controller in the Miami office.

Answer: BD

Explanation:
Every Azure AD directory comes with an initial domain name in the form of
domainname.onmicrosoft.com. The initial domain name cannot be changed or deleted, but you can add
your corporate domain name to Azure AD as well. For example, your organization probably has other
domain names used to do business and users who sign in using your corporate domain name. Adding
custom domain names to Azure AD allows you to assign user names in the directory that are familiar to
your users, such as ‘[email protected].’ instead of 'alice@domain name.onmicrosoft.com'.
Scenario:
Questions & Answers PDF Page 12

Network Infrastructure: Each office has a local data center that contains all the servers for that office.
Each office has a dedicated connection to the Internet.
Humongous Insurance has a single-domain Active Directory forest named humongousinsurance.com
Planned Azure AD Infrastructure: The on-premises Active Directory domain will be synchronized to Azure
AD.
References:
https://docs.microsoft.com/en-us/azure/active-directory/fundamentals/add-custom-domain