Scribd
Upload
572 views2 pages

Minimum Bolt Tension Per AISC 360-16, Table J3.1: Bolt Diameter, In. A325 Bolts A490 Bolts

This document provides minimum bolt tension values from AISC 360-16 for various bolt diameters of grades A325 and A490 bolts. It also lists nominal hole dimensions from AISC 360-16 for corresponding bolt diameters. Finally, it presents a line card from ASTM F959 for DuraSquirt direct tension indicator (DTI) bolts of various diameters, grades, and coatings, listing the number of bolts per keg at different weights. It provides this information as specified in industry standards for reference purposes in structural bolt installation and specification.

Uploaded by

rob westover
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
572 views2 pages

Minimum Bolt Tension Per AISC 360-16, Table J3.1: Bolt Diameter, In. A325 Bolts A490 Bolts

This document provides minimum bolt tension values from AISC 360-16 for various bolt diameters of grades A325 and A490 bolts. It also lists nominal hole dimensions from AISC 360-16 for corresponding bolt diameters. Finally, it presents a line card from ASTM F959 for DuraSquirt direct tension indicator (DTI) bolts of various diameters, grades, and coatings, listing the number of bolts per keg at different weights. It provides this information as specified in industry standards for reference purposes in structural bolt installation and specification.

Uploaded by

rob westover
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Minimum Bolt Tension Per AISC 360-16, Table J3.

1
Bolt diameter, in. A325 bolts A490 bolts

1⁄ 12 15
2

5⁄ 19 24
8

3⁄ 28 35
4

7⁄ 39 49
8

1 51 64

1 1⁄8 64 80

1 1⁄4 81 102

1 3⁄8 97 121

1 1⁄2 118 148

Equal to 0.70 times the minimum tensile strength of bolts as specified in ASTM F3125/F3125M for grades A325
and A490 bolts, with UNC threads, rounded to the nearest kip.

Nominal Hole Dimensions Per AISC 360-16, Table J3.3:


Bolt Diameter, in. Hole and Slot Dimensions, in.
Standard Oversize Short-Slot Long-Slot
Diameter Diameter Width × Length Width × Length
1⁄ 9⁄ 5⁄ 9⁄ × 11⁄ 9⁄ × 1 1⁄
2 16 8 16 16 16 4

5⁄ 11⁄ 13⁄ 11⁄ × 7⁄ 11⁄ × 1 9⁄


8 16 16 16 8 16 16

3⁄ 13⁄ 15⁄ 13⁄ × 1 13⁄ × 1 7⁄


4 16 16 16 16 8

7⁄ 15⁄ 1 1⁄16 15⁄ × 1 1 15⁄ × 2 3⁄


8 16 16 8 16 16

1 1 1⁄8 1 1⁄4 1 1⁄8 × 1 5⁄16 1 1⁄8 × 2 1⁄2

≥ 1 1⁄8 𝑑 + 1⁄8 𝑑 + 5⁄16 (𝑑 + 1⁄8) × (𝑑 + 3⁄8) (𝑑 + 1⁄8) × 2.5𝑑

Tables provided for informative purposes only, refer to AISC 360-16 for additional guidance.

1413 Rockingham Road


Bellows Falls, VT 05101, USA
(800) 552-1999 & (802) 460-3100
fax (802) 460-3104
ASTM F959 DuraSquirt DTI Line Card
343MGDSQ = ¾ A325 Galvanized DuraSquirt DTI
34 3 MG DSQ

BOLT DIAMETER GRADE COATING* INDICATOR


34 = 3/4” 3 - A325 MG - Galvanized DSQ - Durasquirt
10 = 1” 4 – A490 PL - Plain
M20 = 20mm 8 – 8.8 WS – Weathering Steel/Type 3
10 – 10.9 TDZ – Thermally Diffused Zinc Alloy
*Additional coatings available upon request.

Bolt Dia. Grade Pc/Keg Bolt Dia. Grade Pc/Keg


in. A325 Wt. in. A490 Wt.
1⁄ 123XXDSQ 1750/64lb 1⁄ 124XXDSQ 1750/64lb
2 2
5⁄ 583XXDSQ 1250/64lb 5⁄ 584XXDSQ 1250/64lb
8 8
3⁄ 343XXDSQ 1350/64lb 3⁄ 344XXDSQ 1000/64lb
4 4
7⁄ 783XXDSQ 850/64lb 7⁄ 784XXDSQ 700/64lb
8 8
1 103XXDSQ 600/64lb 1 104XXDSQ 600/64lb
1 1⁄8 1183XXDSQ 450/64lb 1 1⁄8 1184XXDSQ 450/64lb
1 1⁄4 1143XXDSQ 350/64lb 1 1⁄4 1144XXDSQ 350/64lb
1 3⁄8 1383XXDSQ 250/64lb 1 3⁄8 1384XXDSQ 250/64lb
1 1⁄2 1123XXDSQ 225/64lb 1 1⁄2 1124XXDSQ 200/64lb

Bolt Dia. Grade Pc/Keg Bolt Dia. Grade Pc/Keg


mm 8.8 Wt. mm 10.9 Wt.
12 M128XXDSQ 1750/64lb 12 M1210XXDSQ 1750/64lb
16 M168XXDSQ 1250/64lb 16 M1610XXDSQ 1250/64lb
20 M208XXDSQ 1000/64lb 20 M2010XXDSQ 1000/64lb
22 M228XXDSQ 650/64lb 22 M2210XXDSQ 800/64lb
24 M248XXDSQ 600/64lb 24 M2410XXDSQ 600/64lb
27 M278XXDSQ 325/64lb 27 M2710XXDSQ 350/64lb
30 M308XXDSQ 450/64lb 30 M3010XXDSQ 350/64lb
36 M368XXDSQ 250/64lb 36 M3610XXDSQ 250/64lb
42 M4210XXDSQ 170/60lb
48 M4810XXDSQ 85/60lb

1413 Rockingham Road


Bellows Falls, VT 05101, USA
(800) 552-1999 & (802) 460-3100
fax (802) 460-3104
appliedbolting.com
[email protected]

You might also like