CATALOGUE

english

NEVE
 The new richer range
of products and colours.
That shines out for
its quality and design.

More functional, more modular, more colourful: Neve has been enhanced,
without compromising on the values, design and quality standards which
mark every Vimar product. A product with Italian design and international
standards and modularity.

1
NEVE

Simple,
silent
technology.

The highest safety standards and compatibility for installation, ergonomic

controls and a range of modular cover plates: with Neve, your electrical
system is complete, fully coordinated and equipped with all the functions
required to live and work in total comfort.

­­­2
NEVE

­­­3
NEVE

Elegant,
sophisticated
colours.

In addition to bright white, Neve is available in charming beige,

elegant matt silver and sophisticated pearly matt champagne.

­­­ 4
NEVE

­­­ 5
NEVE

­­­ 6
NEVE

Safe functions
with universal
standards.

The special Sicury shutter prevents all contact with power sources.
Every device complies with the highest safety standards, and thanks to the
modular system, can be installed easily and adapted to any space and any
need, at home and at work.

­­­ 7
NEVE
General features

Buttons
1- and 2-module buttons
with backlighting and pos-
sibility of customization.

Laser engravings Mounting frame

At the back by each terminal Very sturdy structure possibility of
to describe its function, on one horizontal and vertical installation
side with commercial data and of devices.
on the opposite side with tech-
nical data.

Cover plates
4 colours in technopolymer
and wide range of modularity

Socket outlet
Cover plates With SICURY patented system
Possibility of side-by-side mounting. to prevent accidental contacts.

Mounting frame
3 or 2-central-modules for
Cover plate removing a customized mounting.
Seat for unhooking the cover
plate from the mounting frame
with the use of a tool.

­­­8
NEVE
Example of Box Frame Device Cover plate
combinations

1 x 2 modules

1 or 2 modules, Flush mounting With/without screws 2 modules*

round box or with claws
2 x 1 module

71

71
2+2 modules Flush mounting With screws/claws 2 x 1 module 2+2 modules*
and 1 x 2 modules

2 modules

2-central modules, 2-central modules*

for round or
3-module box 2 x 1 module

Flush mounting With screws

1 module 1-central modules*

From 1-central and With screws

2-separate modules,
for 3-module box 2 x 1 module

2-separate modules*

Flush mounting 1 and 2 modules

3 x 1 module
With screws From 3, 4 and
From 3, 4 and
3+3 modules*
3+3 modules,
for rectangular box

3 modules

3 x 1 module,
3 modules Mounting frame for Plana devices, Plana devices Neve cover plate,
with Plana devices Flush mounting with screws 3 modules*

* For other combinations, see ‘Types of mounting’ from page 34

­­­9
NEVE
Switches
Scope
Switching on and off: • contact opening gap: > 3 mm
• lighting circuits for: • insulation resistance: > 5 MΩ tested with 500 Vdc
- lighting fittings (luminaires) for use with incandescent lamps • dielectric strength: > 2000 V~
- lighting fittings (luminaires) for use with fluorescent lamps, with or • minimum electrical life:
without power factor compensation - 40.000 operations with rated current, 250 V~, cosφ 0,6
• dedicated circuits for: - 5.000 operations for 16 AX switches with rated current, 250 V~,
- motor driven appliances (fans, ventilators, canopy hood, etc.) with load of fluorescent lamps
- switched socket outlets • lightable switches with signalling units 00936

Technical specifications Conformity to Standards

• supply voltage: 250 V~ LV Directive
• rated voltage: EN 60669-1 Standard
- 10 A for push buttons
- 16 AX for switches that control circuits of fluorescent lamps
with power factor compensation

Wiring diagrams for luminous 1P 1-way switches with signalling unit

For switch location For switch location in the dark: Indication of the operation state
in the dark: pilot lamp unlit when the controlled of appliances not visible from
pilot lamp always lit load is on. Suitable for incandescent the operating point:
or halogen lamps pilot lamp lit when the controlled load is on

L L L
N N N

L 1 L 1 L 1

Wiring diagrams for luminous 1P 2-way switches with signalling unit

For switch location For switch location in the dark: Indication of the operation state
in the dark: pilot lamp unlit when the controlled of appliances not visible from
pilot lamp always lit load is on. Suitable for incandescent the operating point:
or halogen lamps pilot lamp lit when the controlled load is on

L L L
N N N
2 2 2 2 2 2

L 1 L 1 L 1 L 1 L 1 L 1

Wiring diagrams for luminous 2P 1-way switches with signalling units

For switch location Indication of the operation state

in the dark: of appliances not visible from
pilot lamp always lit the operating point:
pilot lamp lit when the controlled load is ON
L L
N N

­­­10
NEVE
Switches
Blank module and cable outlet
09041 Blank module, white
09044 Cable outlet, white

18,5

9 22,3

09041

20,6

11,1
22,3

09044

1-way and reversing switch 250 V~

09001 1P 16 AX 250 V~ 1-way switch, lightable, white
09001.2 1P 16 AX 250 V~ 1-way switch, lightable, white - 2 modules
09013 1P 16 AX 250 V~ reversing switch, lightable, white
09013.2 1P 16 AX 250 V~ reversing switch, lightable, white - 2 modules
35,9

23,1 22,3

09001 09001.2

39,5

26,7 22,3

09013 09013.2

2-way switch and 1-way switch 250 V~

09005 1P 16 AX 250 V~ 2-way switch, lightable, white
09005.2 1P 16 AX 250 V~ 2-way switch, lightable, white - 2 modules
09015 2P 16 AX 250 V~ 1-way switch, lightable, white
35,9

23,1 22,3

09005 09005.2

45,5

32,7 2

09015

The drawings of the side views give the overall dimensions and the depth of the recess in mm
­­­11
NEVE
Switches
Wiring diagram for luminous
push buttons with signalling unit

For switch location

in the dark:
pilot lamp always lit

L
N

L 1

Switches with directional arrows

These switches can be used for the direct control of motor dri-
ven loads, i.e. roller blinds, gates etc. The switches, which are
operated by push buttons, may be associated to relays to con-
trol motor driven loads by pulses, i.e. roller blinds, gates, etc.

Luminous name plate push button

Name plate opening Microtube lamp and customized cardboard assembly

body E10 lamp
opaline
diffuser cardboard
front

­­­12
NEVE
Switches
1P push button 250 V~
09008 1P NO 10 A 250 V~ push button, lightable, white
09008.2 1P NO 10 A 250 V~ push button, lightable, white - 2 modules
35,9

23,1 22,3

09008
35,9

23,1 22,3

09008.2

Switch with directional arrows 250 V~

09060 2P 10 AX 250 V~ (6 terminals) two-button switch,with directional arrows and central OFF position, white
09062 Two interlocked push buttons, 1P NO + 1P NO 10 A, with directional arrows, white

43

33,5 22,3

09060
43

33,5 22,3

09062

Name-plate push button

09050 1P NO 10 A push button, with luminous name plate, for E10 10x28 mm 1 W max lamp, white - 2 modules.
Supplied without lamp

38

25,2 44,8

09050

The drawings of the side views give the overall dimensions and the depth of the recess in mm
­­­13
NEVE
Switches
Dimmers 09146 and 09147 Controllable loads
Technical specifications 09147
• Electronic switch with solid state device • Incandescent and halogen lamps:
• TRIAC technology 30-500 W 120 V~ 50/60 Hz.
• the connection should be made together with a quick-acting • Ferromagnetic transformers for extra-low voltage halogen
fuse with high breaking capacity F5AH 250 V~ type, as shown lamps:
in the following diagrams: 30-300 VA 120 V~ 50/60 Hz.
- in place of a switch (figure 1);
09146
- in addition to a switch (figure 2);
• Incandescent and halogen lamps:
- in a circuit making two or more points of operation
60-900 W 230 V~ 50/60 Hz.
(2-way switch: figure 3; reversing switch: figure 4)
• Ferromagnetic transformers for extra-low voltage halogen
lamps:
60-300 VA 230 V~ 50/60 Hz.

09146 - 09147 - Wiring diagrams

Figure 1 Figure 2 Figure 3

L L L
N N N

fuse fuse fuse

09146 - 09147 - Wiring diagrams

Figure 4
L
N

fuse

09153 - Dimmer Conformity to Standards

Technical specifications LV Directive
• Electronic switch with solid state device; EMC Directive
• TRIAC technology; EN 60669-2-1 Standard
• the strength of location in the dark decreases as the bright-
ness of the controlled lamps increases;
• the connection should be made together with a quick-acting
fuse with high breaking capacity F5AH 250 V~ type, as shown
in the following diagrams:
- in place of a switch (figure 1, overleaf);
- in addition to a switch (figure 2, overleaf);
- in a circuit making two or more points of operation
(2-way switch: figure 3; reversing switch: figure 4, overleaf)

Controllable loads
• Incandescent and halogen lamps:
100-500 W 230 V~ 50/60 Hz.

­­­14
NEVE
Switches
Dimmer
*09146 Dimmer, 230 V~ 50/60 Hz for 60-900 W incandescent lamps, 60-300 VA ferromagnetic transformers, control and regulation by rotary
potentiometer, white
09147 Dimmer, 120 V~ 50/60 Hz for 30-500 W incandescent lamps, 30-300 VA ferromagnetic transformers, control and regulation by rotary
potentiometer, white

58,5

40 22,3

09146 09147

Dimmer
09153 Dimmer, 230 V~ 50/60 Hz for 100-500 W incandescent lamps, control by push-push 2-way switch and regulation by rotary potentiometer,
visible in darkness, white

61,75

40 22,3

09153

09153 - Wiring diagrams

Figure 1 Figure 2 Figure 3

L L L
N N N

fuse fuse fuse

09153 - Wiring diagram

Figure 4
L
N

fuse

The drawings of the side views give the overall dimensions and the depth of the recess in mm
*Not to be used in European Countries ­­­15
NEVE
Socket outlets
Socket outlets 250 V~

Scope
Supply of electrical household appliances, lighting fittings, etc. • breaking capacity: 50 operations (plug insertion and withdrawn)
with 1,25 rated current 275 V~ cosφ 0,6
Technical specifications • electrical life: > 5.000 operations (plug insertion and withdrawn)
• supply voltage: 250 V~ with rated current and voltage cosφ 0,6
• rated voltage: 10 A or 16 A • resilient wrap socket-contacts
• shuttered socket-contacts • priority of conection on earthing socket-contacts
• insulation resistance tested with 500 Vdc: > 5 MΩ
• dielectric strength: 2000 V~ Conformity to Standard
CEI 23-50 (IEC 60884-1) Standard

Plugs and socket outlets - matching possibilities

19

19

26

19 19
VIMAR 26
Plugs standard products P11 P17/11 P30
09201 09203 09209 09210
MILLE

S10 01020 - 01020.B 01020 - 01020.B 01020 - 01020.B 01020 - 01020.B

VIMAR
ø4
19

SUPERNOVA
ø4

S10 00200 - 00200.B 00200 - 00200.B 00200 - 00200.B 00200 - 00200.B

2P 10 A
ø4

Europlug
18
ø4

2P 2,5 A

S11 01021 - 01021.B 01021 - 01021.B 01021 - 01021.B 01021 - 01021.B

VIMAR
MILLE
ø4
ø4

SPA11 VIMAR
01041 - 01041.B 01041 - 01041.B --- ---
19

SUPERNOVA

S11 00201 - 00201.B 00201 - 00201.B 00201 - 00201.B 00201 - 00201.B

ø4

SPA11 00206 - 00206.B 00206 - 00206.B --- ---

2P+E 10 A
S11 00211 - 00211.B 00211 - 00211.B 00211 - 00211.B 00211 - 00211.B
ø5

S16 --- ---

26
ø5

2P 16 A

S17 --- 01026 - 01026.B --- 01026 - 01026.B

VIMAR
MILLE
ø5
ø5

SPA17 VIMAR
--- 01043 - 01043.B --- ---
26

SUPERNOVA

S17 --- 00202 - 00202.B --- 00202 - 00202.B

SPA17 --- 00207 - 00207.B --- ---

ø5

2P+E 16 A
S17 --- 00212 - 00212.B --- 00212 - 00212.B
ø 4,8 German --- --- 00230 - 00230.B 00230 - 00230.B
SUPERNOVA

standard

German
--- --- 00231 - 00231.B 00231 - 00231.B
19

+ French
standard
German
ø 4,8 + French --- --- 00241 - 00241.B 00241 - 00241.B
2P+E 16 A standard

Plugs and socket outlets matching standard

­­­16
NEVE
Socket outlets
Italian standard socket outlet 250 V~
09201 2P+E 10 A SICURY socket outlet, Italian standard P11, white
09203 2P+E 16 A Bpresa SICURY socket outlet, Italian standard P17/11, white

32,7 32,6

23,2 22,3 23,2 22

47
09201 09203

Italian standard socket outlet 250 V~

09209 2P+E 16 A SICURY socket outlet, Italian standard P30 (lateral and central earth contacts), white - 2 modules
09210 2P+E 16 A SICURY socket outlet, universal, for 2P 2,5 A Europlugs, 2P and 2P+E 10 A and 16 A Italian standard plugs,
2P+E 16 A 250 V~ German standard plugs - 2 modules. No earth connection is realized with French standard plug

38,8 35,9

29,3 44,8 26,4

47

09209 09210

French standard socket outlet 250 V~

09212 2P+E 16 A 250 V~ SICURY socket outlet, French standard, white - 2 modules

35,9

26,4

09212

The drawings of the side views give the overall dimensions and the depth of the recess in mm
­­­17
NEVE
Socket outlets 09250 09240 09264 09250 09265 09240 09253

Plugs and socket outlets - matching possibilities

09212
09212 09234
09234
09212 09242 09249
0924209234 09243
0924209248
09243 09249
09243 09248
09212 09233
09233
09233 09245 09234
0924509233 09246 09248
09245
09246 09249
09246
S10 Italian standard plug • • • • •
2P 2,5 A Europlug • • • • •
2P+E 16 A 250 V~ German standard plug • • • •
2P 16 A 250 V~ German/French standard plug • • • • •
2P+E 16 A 250 V~ German/French standard plug • • • • •
2P+E 16 A 250 V~ French standard plug • • • • •
2P 15 A 125 V~ American standard plug • • • •
2P+E 15 A 125 V~ American standard plug 09250
09250 09240
09240
09250 09264
09264
09240 09265
0926509264 09253
•09253
09265 •09253
2P+E 15 A 127 V~ Saudi Arabian standard plug • •
2P 10 A 250 V~ Brazilian standard plug
2P+E 10 A 250 V~ Brazilian standard plug
2P 20 A 250 V~ Brazilian standard plug
2P+E 20 A 250 V~ Brazilian standard plug
2P+E 16 A 250 V~ Israeli standard plug
09212 09234 09242 09249
09249 09212
09243 09248 09234
09249
09248 09242
09248 09243
2P 10 A 250 V~ Israeli standard plug 09233 09245 09246 09233 09245 09246
2P+E 16 A 250 V~ Thai standard plug • •
2P 10 A 250 V~ Thai standard plug • •

Legend
• Standard plug matching the socket outlet
• Standard plug matching the socket outlet without continuity
of the earth connection
09250
• Socket outlet matching the same 09240
standard plug, only 09264 09265
09250 09253
09240 09264 09265 09253

Conformity to Standards
French standard socket outlet: NF C 61-314.
Argentinian standard socket outlet: IRAM 2071.
Thai standard socket outlet: TIS 166-2549. 09248
09249 09249 09248

VIMAR plugs
• 00230: 2P+E 16 A 250 V~ German standard
• 00231: 2P+E 16 A 250 V~ German/French standards
• 00232: 2P+E 16 A 250 V~ French standard
• 00241: 2P+TE 16 A 250 V~ German/French standards

­­­18
NEVE
Socket outlets
Argentinian standard socket outlet 250 V~
09250 2P+E 10 A 250 V~ SICURY socket outlet, Argentinian standard, white
09253 2P+E 20 A 250 V~ SICURY socket outlet, Argentinian standard, white - 2 modules

36,5 39,3

27 22,3 29,8 44

47
09250 09253

Euro-American standard socket outlet 250 V~

09234 2P 16 A 250 V~ SICURY socket outlet, Euro-American standard (parallel and in-line flat pins and ø 4,8 mm pins), white
09233 2P 16 A 250 V~ socket outlet, Euro-American standard (parallel and in-line flat pins and ø 4,8 mm pins), white
39,5

30 22,3

09234 09233

Euro-American standard socket outlet 250 V~

09248 2P+E 16 A 250 V~ SICURY socket outlet, polarized Euro-American standard, white - 2 modules
09249 Double 2P+E 16 A 250 V~ SICURY socket outlet, polarized Euro-American standard, white - 3 modules

36

26,5

09248

34

24,5

09249

The drawings of the side views give the overall dimensions and the depth of the recess in mm
­­­19
NEVE 0921209212
09212 0923409234 09242
09234 0924209242 0924309243
09243
0923309233 09245
09233 0924509245 0924609246
09246

Socket outlets
Plugs and socket outlets - matching possibilities

0925009250 09240
0924009240 09212
0926409264 092650926509234
09242
09242
0925309253
09243
09243
09250 09264 09265 09253
09240 09264 09265
09233 09245
09245 09246
09246
S10 Italian standard plug • • •
2P 2,5 A Europlug • • •
2P+E 16 A 250 V~ German standard plug •
2P 16 A 250 V~ German/French standard plug •
2P+E 16 A 250 V~ German/French standard plug •
2P+E 16 A 250 V~ French standard plug •
0924909249
09249 0924809248
09248
2P 15 A 125 V~ American standard plug • •
2P+E 15 A 125 V~ American standard plug 09250 09240 09264• 09265 • 09253
2P+E 15 A 127 V~ Saudi Arabian standard plug • •
2P 10 A 250 V~ Brazilian standard plug • •
2P+E 10 A 250 V~ Brazilian standard plug • •
2P 20 A 250 V~ Brazilian standard plug •
2P+E 20 A 250 V~ Brazilian standard plug •
2P+E 16 A 250 V~ Israeli standard plug •
09249 09248
2P 10 A 250 V~ Israeli standard plug •
2P+E 16 A 250 V~ Thai standard plug
2P 10 A 250 V~ Thai standard plug

Legend
• Standard plug matching the socket outlet
• Standard plug matching the socket outlet without continuity
of the earth connection
• Socket outlet matching the same standard plug, only

Conformity to Standards
Brasilian standard socket outlet: NBR 60884-1, NBR 14136.
Saudi Arabian standard socket outlet: SASO 2204.
Israeli socket outlet: SI 32 part 1.1

VIMAR plugs
• 00230: 2P+E 16 A 250 V~ German standard
• 00231: 2P+E 16 A 250 V~ German/French standards
• 00232: 2P+E 16 A 250 V~ French standard
• 00241: 2P+TE 16 A 250 V~ German/French standards

­­­20
NEVE
Socket outlets
Brazilian standard socket outlet 250 V~
09264 2P+E 10 A 250 V~ SICURY socket outlet, Brazilian standard, white
09265 2P+E 20 A 250 V~ SICURY socket outlet, Brazilian standard, white

42

32,5 22,3

09264 09265

Israeli standard socket outlet 250 V~

09240 2P+E 16 A 250 V~ SICURY socket outlet, Israeli standard, white - 2 modules

39,2

29,7

09240

American and Saudi Arabian standards socket outlet 127 V~

09242 2P+E 15 A 127 V~ SICURY socket outlet, American and Saudi Arabian standards, white
09243 Double 2P+E 15 A 127 V~ SICURY socket outlet, American and Saudi Arabian standards, white - 3 modules
09245 2P+E 15 A 127 V~ socket outlet, American and Saudi Arabian standards, white
09246 Double 2P+E 15 A 127 V~ socket outlet, American and Saudi Arabian standards, white - 3 modules
36,5 35,5

27 22,3 26
47

09242 09243
36,5 35,5

27 22,3 26
47

09245 09246
The drawings of the side views give the overall dimensions and the depth of the recess in mm
­­­21
NEVE
Signal reception socket outlets
09320 - 09321 - Phone jacks

Technical specifications
- screw terminal connections

Phone jacks connections 09320 - Wiring diagram

L1
L2 L1 L2 L1
L2
TX TS TX TS
09320 09320 09320
2 T

L1 L2 L1 L2 L1 L2
TS TX TS TX TS TX

09320 09321 NOTE

RJ11 RJ12 L1-TS line is interrupted when the phone jacks are wired as in the diagram above: if the
6-position 4-conductor 6-position 6-conductor phone plug is withdrawn from a socket connector, all phone jacks connected after it in
the installation would be disconnected.
To overcome this inconvenience, insert a plug with L1-TS jumper.

­­­22
NEVE
Signal reception socket outlets
Special socket outlet
09330 2P 6 A 24 V (SELV) socket outlet for 01620 plugs (ø 3 mm pins, 12,4 mm distance between centres), white.
For auxiliary circuits

34,5

25 22,3

09330

Phone jack
09320 RJ11 phone jack, 6-position 4-conductor (6/4), screw terminals, white
∆ 09321 RJ11 phone jack, 6-position 6-conductor (6/6), screw terminals, white

43,1 43,1

33,6 22,3 33,6 22,3

47

09320 ∆ 09321

Phone jack
09324 Phone jack, Israeli standard, screw terminals, white

42,9

33,4 22,3

09324

The drawings of the side views give the overall dimensions and the depth of the recess in mm
∆ Available until stocks last
­­­23
NEVE
Signal reception socket outlets
EDP socket connectors

Scope
Devices designed to realize information or telephone networks.

Cabling code

09338.9

T-568A
7 8

2
1
4

6
5

3
B
B

A
A

T-568B

­­­24
NEVE
Signal reception socket outlets
EDP socket connector
09338.9 RJ45 outlet with Netsafe connector, cat. 5e, unshielded, T568A/B universal wiring, 8-contact, insulation-piercing terminals without tool use,
white

35,9

26 22

09338.9

Adaptor for EDP connector

09338.C Adaptor for RJ45 connector with Keystone fixing, white

18,5

9 22,3

09338.C

The drawings of the side views give the overall dimensions and the depth of the recess in mm
­­­25
NEVE
TV-RD-SAT 5-2400 MHz socket outlets
Coaxial TV-RD-SAT socket outlets Some examples of the supported system topologies
Multiple socket outlets in cascade
Scope
• connect user equipments to systems for the distribution of Multiple parallel connected socket outlets
analogic or digital sound and video signals, from terrestrial,
Combined cascade/parallel connected
satellite or cable link, in the 5-2400 MHz frequency band
• permit the connection of a single device (e.g. TV or SAT receiver) Multi-switch for satellite signal distribution
• can be used for satellite Internet applications and, thanks to Multi-switch for combined terrestrial and satellite signal distribution
the 5-40 MHz return channel, also for interactive functions
(hotel communications and cable TV) Combined cascade/parallel with IF-IF conversion unit for single-
• the single connection socket allows the passage of d.c. current cable distribution of combined terrestrial and satellite signals
and control signals, and the through-line socket ensures op- Combined cascade/parallel with modular unit for feeding terrestrial
timal utilisation on any type of individual or central distribution and satellite programs in the 40-862 MHz band (terrestrial)
configuration (see table overleaf).

The range Technical specifications

• single connection socket which allows the passage of d.c. • frequency range: 5-2400 MHz
current and control signals (24 V 500 mA max) • output: male connector
• through-line sockets with connection attenuation 10 dB. • return channel in 5-40 MHz band
The through-line socket can become end-of-line socket if • shielding efficiency: A class
“closed” with the special terminal resistor 16330. It allows d.c. • cable dimensions:
current and control signals (24 V 500 mA max) to pass through - internal wire ø 1 mm max
the line, but not to the user port (male connector). - external insulating sheath: ø 4-7 mm
Conformity to Standards
EN 50083-1, EN 50083-4 Standards
EMC Directive, EN 50083-2 Standard

Installation

Cable drop from below Cable drop from above

12

12
0

MADE IN ITALY MADE IN ITALY

–15C –15C
0

MADE IN ITALY MADE IN ITALY PAT. PEND. PAT. PEND.

20

–15C –15C
V71303 V71303
20

PAT. PEND. PAT. PEND.

0

V71303 V71303
0

ø 6-7 ø 4-5
ø 6-7 ø 4-5
15 2 8 12 2 5,5
15 2 8 12 2 5,5

Reversed sheath Reversed sheath

09300.01 - Cable insertion 09300.01 - Cord-grip closing 09300.10 - Cable insertion 09300.10 - Cord-grip closing

­­­26
NEVE
TV-RD-SAT 5-2400 MHz socket outlets
Coaxial TV-RD-SAT 5-2400 MHz socket outlet
09300.01 Coaxial TV-RD-SAT 5-2400 MHz socket outlet, single connection, with male connector, connection attenuation 1 dB, white.
Allows the passage of d.c. current and control signals (24 V 500 mA max)
09300.10 Coaxial TV-RD-SAT 5-2400 MHz socket outlet, through-line, with male connector, connection attenuation 10 dB, white

35,6

Single connection 26,1 22,3

Ad: 1 dB

24 V 500 mA max
male

09300.01
Through-line 35,6

26,1 22,3
Ad: 10 dB

male

09300.10

F-type coaxial socket outlet

09318 Coaxial socket outlet with F-type female connector.
For frequencies up to 2400 MHz. In/out connection with F type male connector 01654

29,7

9 22,3

09318

Terminal resistor
16330 Z 75 Ω terminal resistor for TV-RD-SAT socket outlet line end, for frequencies up to 2400 MHz

16330

How to connect

Programmes - Applications Programmes - Applications

• Terrestrial TV • Terrestrial radio

Hi-Fi MHz
stereo

Radio
male male receiver

Programmes - Applications Programmes - Applications

• Cable TV (CATV) • Satellite TV and radio

• Interactive hotel
GHz
communication GHz

STB SAT SATELLITE RECEIVER

male STB male SAT

(Set Top Box)

Coaxial cable connection SCART cable connection

The drawings of the side views give the overall dimensions and the depth of the recess in mm
­­­27
NEVE
TV-RD-SAT 5-2400 MHz socket outlets, TV socket outlets and signalling
Coaxial TV-RD-SAT socket outlets Some examples of supported system topologies
Multiple socket outlets in cascade
Scope
As for 1-output TV-RD-SAT socket outlets, the 2-output socket Multiple parallel connected socket outlets
outlets allow the connection of two appliances (e.g.. TV and SAT Combined cascade/parallel
receiver or TV and radio).
Multi-switch for satellite signal distribution
The range Multi-switch for combined terrestrial and satellite signal distri-
• single connection socket which allows the passage of d.c. bution
current and control signals (24 V 500 mA max) Combined cascade/parallel with IF-IF conversion unit for single-cable
• through-line socket with connection attenuation 10 dB. distribution of combined terrestrial and satellite signals
The through-line socket can become end-of-line socket if “clo-
sed” with the special terminal resistor 16330. They allow d.c. Combined cascade/parallel with modular unit for feeding terrestrial and
satellite programs in the 40-862 MHz band (terrestrial)
current and control signals (24 V 500 mA max) to pass through
the line, but not to the user port (male connector).

Technical specifications 2-output TV-RD-SAT socket outlets: how to connect

• frequency range: 5-2400 MHz Programmes - Applications
• outputs: male and female connectors male
• return channel in the 5-40 MHz band • Terrestrial TV
• Terrestrial radio
• shielding efficiency: A class
• cable dimensions:
- internal wire ø 3 mm max
- external insulating sheath: ø 5-7 mm female Radio
receiver

Conformity to Standard Programmes - Applications

EN 50083-1, EN 50083-4 Standards
male
EMC Directive, EN 50083-2 Standard • Terrestrial TV
• Cable TV (CATV)
• Interactive hotel
communication

female STB
(Set Top Box)

Coaxial cable connection SCART cable connection

Coaxial TV 40-862 MHz socket outlets Figure 1 Figure 2

Technical specifications
• patented cord-grip for easy and reliable connection of the
coaxial cable;
• captive screw terminals and toothed pressure plate, for the
central conductor;
• TV socket outlet without attenuation: to be used for single Amplifier
unit
down-lines or for collective installation lines from distribution
boxes or tap-offs (figure 1 and 2)
TV socket
outlets

TV socket outlet
Tap-off

Buzzers
Buzzers are to be supplied through safety isolating transformer. • intermittent sound 15/60: the sound emission can last up to
15 s max, followed by a period at rest of 60 s
Technical specifications
• D-type equipments: the sound emission has the same lasting Conformity to Standard
time as the control operation LV Directive,
EN 62080 Standards

­­­28
NEVE
TV-RD-SAT 5-2400 MHz socket outlets, TV socket outlets and signalling
Coaxial TV-RD-SAT 5-2400 MHz socket outlet
∆ 09310.05 Coaxial TV-RD-SAT 5-2400 MHz socket outlet, single connection, 2 male and female outputs, connection attenuation 5 dB, white - 2 modules.
Allows the passage of d.c. current and control signals (24 V 500 mA max) through the female connector
∆ 09310.10 Coaxial TV-RD-SAT 5-2400 MHz socket outlet, through-line, 2 male and female outputs, connection attenuation 10 dB, white - 2 modules

35,7

Single connection 26,2 44,

Ad:
Ad: 55dB
dB
24 V
24 V500
500mA
mA max
max
IEC 60169-2
female IEC
male60169-2
female male

∆ 09310.05
35,7

Through-line 26,2 44,

Ad: 10dB
Ad: 10 dB

IEC 60169-2
female IEC
male60169-2
female male

∆ 09310.10

Coaxial TV 40-862 MHz socket outlet

*09313 Coaxial TV 40-862 MHz socket outlet, single connection, with female connector, white

38,5

29 22,35

09313

Buzzer
09377 Buzzer, 120 V~ 50/60 Hz
09378 Buzzer, 230 V~ 50/60 Hz

40,7

31,2 22,3

09377

40,7

31,2 22,3

09378

The drawings of the side views give the overall dimensions and the depth of the recess in mm until stocks last
∆ Available
*Not to be used in European Countries ­­­29
NEVE
Mounting frames
Technical specifications Conformity to Standards
• polycarbonate (Glow Wire 850 °C) LV Directive
• dielectric strength 2000 V EN 60669-1 Standards
• closely compacted rear grid for stiffening

Dimensions (in mm)

65

118
25,6 60 95
20 73,2 16,25 16,25
83,6
10,2 60 10,2

83,6

118
95
60
73,2
60

65
09602 - 09603 09606 09607

118
111,8
5,4 16,5 95 16,6 118
10,2 83,6 5,6 11 110
52
65

65
09613 09623

140,5
15,8 118
10,2 108
70

118
111,8
16,2 95
6,1 10,2 83,6
09614

15,8 208
5,6 200
110,5
124
70

09617 09619

­­­30
NEVE
Mounting frames
Mounting frame
09602 2-module mounting frame, with claws, for ø 60 mm mounting boxes, modular, 71 mm distance between centres
09603 2-module mounting frame, without screws, for 60 mm fixing centres or 56x56 mm mounting boxes, modular, 71 mm distance between centres
09606 2-central-module frame for horizontal mounting, with screws, for 3-module mounting boxes or boxes with 60 mm fixing centres
09607 2-central-module frame for vertical mounting, with screws, for 3-module mounting boxes or boxes with 60 mm fixing centres

09602 09603

09606 09607

Mounting frame
09613 3-module mounting frame, with screws, for 3-module mounting boxes
09623 3-module mounting frame, with screws, useful for the installation of Plana series devices (e.g. USB socket outlets, universal dimmers,
hand lamps, electronic badge switch) and to complete with Neve cover plates for 3-module mounting boxes
09614 4-module mounting frame, with screws, for 4-module mounting boxes
09617 7-module mounting frame, with screws, for 7-module mounting boxes
09619 6-module (3+3) mounting frame, with screws, for 09996 and 09996.AU and 4x4” mounting boxes

09613 09623 09614

09617 09619

­­­31
NEVE
Cover plates
Technical specifications Conformity to Standards
• technopolymer LV Directive
EN 60669-1 Standard

Dimensions (in mm)

9,2 80

8,7 80 9 120
80

80
151
09642... 09647...

09643...

9,5 120 9,5 120 9,5 120

80
80

80
09650... 09651... 09652...

8,7 120 8,8 142,5

80
80

09653... 09654...

9,5 120

9,5 210
132
80

09657... 09653...

­­­32
NEVE
Cover plates
Cover plate
09642... 2-module cover plate, technopolymer, for ø 60 mm flush mounting boxes
09643... 4-module cover plate (2+2, 71 mm distance between centres) for horizontal and vertical installation, technopolymer
09647... 2-central-module cover plate for 3-module mounting boxes, technopolymer
09650... Blank module for 3-module mounting boxes, technopolymer

09642... 09647... 09650...

09643...

Cover plate
09651... 1-central-module cover plate, for 3-module mounting boxes, technopolymer
09652... 2-separate-module cover plate, for 3-module mounting boxes, technopolymer
09653... 3-module cover plate, for 3-module mounting boxes, technopolymer

09651... 09652...

09653...

Cover plate
09654... 4-module cover plate, for 4-module mounting boxes, technopolymer
09657... 7-module cover plate, for 7-module mounting boxes, technopolymer
09659... 6-module (3+3) cover plate, for 4x4’’-module mounting boxes, technopolymer

09654... 09657... 09659...

­­­33
NEVE
Types of mounting
Module Box Frame

2 for
ø 60 mm
mounting
box

V71001 V71701 09602 09603

For masonry For hollow walls, with screws, 2-module, 2-module,
GW 650 °C, light blue GW 850 °C, light blue with claws without screws
V71001.AU
GW 960 °C, black

71 71
09602 x2
2+2 2-module,
with claws
71

with 71

71 mm
between
centres
71 71
71

71

09603 x2
2-module,
without screws

V71001 V71701
For masonry For hollow walls, with screws,
GW 650 °C, light blue GW 850 °C, light blue
2-central V71001.AU
GW 960 °C, black
for
ø 60 mm
and
3-module
mounting
box V71303 V71703
For masonry For hollow walls
GW 650 °C, light blue GW 850 °C, light blue 09606 09607
2-central module, 2-central module,
V71303.AU for horizontal installation for vertical installation
GW 960 °C, black

4x2” mounting box

­­­34
NEVE
Types of mounting
Cover plate Colour
White Beige Matt silver Matt champagne

09642... 09642.01 09642.02 09642.11 09642.12

2-module

09643... 09643.01 09643.02 09643.11 09643.12

2+2-module, for
horizontal and
vertical installation

09647... 09647.01 09647.02 09647.11 09647.12

2-central-module,
for horizontal and
vertical installation

­­­35
NEVE
Types of mounting
Module Box Frame

4x2” mounting box 09613

3-module

3
V71303 V71703
For masonry For hollow walls
GW 650 °C, light blue GW 850 °C, light blue
09623
V71303.AU 3-module, to use
GW 960 °C, black for installation of
Plana devices

▲V54303 ▲V54903
3-module floor mount turret Flush box for floor mount turret
(to complete with box V54903) (to complete with turret V54303)

4 V71304 V71704 09614

For masonry For hollow walls 4-module
GW 650 °C, light blue GW 850 °C, light blue
V71304.AU
GW 960 °C, black

7
V71306 V71706 09617
For masonry For hollow walls 7-module
GW 650 °C, light blue GW 850 °C, light blue
V71306.AU
GW 960 °C, black

3+3

09996 4x4” mounting 09619

For masonry, GW 650 °C, box 3+3-module,
light blue 4x4’’

­­­36
NEVE
Types of mounting
Cover plate Colour
White Beige Matt silver Matt champagne

09651... 09651.01 09651.02 09651.11 09651.12

1-central-module

09652... 09652.01 09652.02 09652.11 09652.12

2-separate-module

09653... 09653.01 09653.02 09653.11 09653.12

3-module

09650... 09650.01 09650.02 09650.11 09650.12

Blank module

09654... 09654.01 09654.02 09654.11 09654.12

4-module

09657... 09657.01 09657.02 09657.11 09657.12

7-module

09659... 09659.01 09659.02 09659.11 09659.12

3+3-module

▲ New article
­­­37
NEVE
Customization
Devices customization Example of customized switches
Vimar laser technology allows the reproduction of any name, logotype or
trademark, with absolute precision and indelebility, even for small quantities.

Information
• for button engravings, make sure that the desired symbol or label is not
already included in the table ‘Standard symbols and wordings’ below; if so,
simply indicate the corresponding code in addition to the article code in your
order. (i.e. 09001.51 = 1P 16 AX 1-way switch with .51 symbol).
Laser customization advantages
• indelible engraving that does not deteriorate over time;
• high-precision reproduction even of very fine lines and complex images;
• service available even for minimal quantities;
• possibility of ordering the same customization at different times with identical 1-module 2-module
results.
The few limits of technology
• it is not possible to reproduce coloured images.
What to supply
• a printout of the image to be reproduced, in black-and-white line drawing
scaled 2 or 3 times larger than the finished size;
• an image in EPS, TIFF or JPEG format of the subject to be reproduced;
Things to avoid
• do not provide photocopies;
• do not fax the image to be reproduced, because the low definition of the fax Possible positions to customize
makes it impossible to reproduce the customization with the high quality of
laser system. Customization
How to proceed not visible in
• enclose (without paper clips, staples or adhesive tape) or send the image to darkness.
be reproduced;
• deliver all the documentation to your area wholesaler/distributor, who will
then forward it to Vimar.
Estimated lead times for devices
• 10 working days for the sample; 
• 10 working days from confirmation for completed order.

Standard symbols and wordings

51 52 53 54 55 56 57 58 59 60 61

OFF ON
33 34 39 40 41 42

­­­38
NEVE
Cover plates
Technopolymer cover plates

01 White 02 Beige

11 Matt silver 12 Matt champagne

­­­39
NEVE
Signalling units
LED signalling unit
00935.A LED signalling unit 12-24 V~ 0,1 W, amber ∆ 00936.R LED signalling unit, 110-250 V~ 0,5 W, red
00935.G LED signalling unit 12-24 V~ 0,1 W, green
00935.R LED signalling unit 12-24 V~ 0,1 W, red
00935.B LED signalling unit 12-24 V~ 0,1 W, blue
00935.W LED signalling unit 12-24 V~ 0,1 W, white
Life of signalling unit: 50000 hours

00935...
∆ 00936...

LED signalling unit

00936.250.A LED signalling unit 250 V~ 50/60 Hz 0,35 W, amber 00936.120.A LED signalling unit, 120 V~ 50/60 Hz 0,2 W, amber
00936.250.G LED signalling unit 250 V~ 50/60 Hz 0,35 W, green 00936.120.G LED signalling unit, 120 V~ 50/60 Hz 0,2 W, green
00936.250.R LED signalling unit 250 V~ 50/60 Hz 0,35 W, red 00936.120.R LED signalling unit, 120 V~ 50/60 Hz 0,2 W, red
00936.250.B LED signalling unit 250 V~ 50/60 Hz 0,35 W, blue 00936.120.B LED signalling unit, 120 V~ 50/60 Hz 0,2 W, blue
00936.250.W LED signalling unit 250 V~ 50/60 Hz 0,35 W, white 00936.120.W LED signalling unit, 120 V~ 50/60 Hz 0,2 W, white
Life of signalling unit: 50000 hours

00936.250...
00936.120...

∆ Available until stocks last

­­­40
NEVE

­­­III
B.C18014 EN 1805

Viale Vicenza, 14
36063 Marostica VI - Italy
Tel. +39 0424 488 600
Fax +39 0424 488 709
www.vimar.com