Scribd
Upload
66 views

Direct Shear (Astm D 3080) : Grafik Tegangan Geser Vs Displacement Grafik Tegangan Geser Max Vs Tegangan Geser Normal

1. A direct shear test was conducted on a soil sample according to ASTM D 3080 to determine the shear strength of the soil. 2. The test was performed at three normal stress levels (0.1, 0.2, and 0.4 kg/cm^2) and shear stress versus displacement was recorded for each load level. 3. The results showed the shear strength increased with increasing normal stress, and a linear relationship was observed between maximum shear stress and normal stress.

Uploaded by

Muhammad Azizi
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
66 views

Direct Shear (Astm D 3080) : Grafik Tegangan Geser Vs Displacement Grafik Tegangan Geser Max Vs Tegangan Geser Normal

1. A direct shear test was conducted on a soil sample according to ASTM D 3080 to determine the shear strength of the soil. 2. The test was performed at three normal stress levels (0.1, 0.2, and 0.4 kg/cm^2) and shear stress versus displacement was recorded for each load level. 3. The results showed the shear strength increased with increasing normal stress, and a linear relationship was observed between maximum shear stress and normal stress.

Uploaded by

Muhammad Azizi
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

DIRECT SHEAR (ASTM D 3080)

Praktikum : Uji Geser Langsung (Direct Shear) Tanggal : 2 November 2016


Lokasi : Laboratorium Mekanikan Tanah Praktikan : Kelompok 4A
Disusun Oleh : Mohtar Anwar Asisten Laporan : M. Shoffar Al-Hafizh

D ring 6.35 cm Loading 1 mm/min Kalibrasi Dial Horizontal 0.01


T ring 2 cm Horizontal Ring 0.01 mm/div Kalibrasi Proving Ring 0.656
Luas 31.669 cm² Volume 63.338 cm³

Load 3.167 kg Load 6.334 kg Load 12.668 kg


Normal Stress 0.1 kg/cm² Normal Stress 0.2 kg/cm² Normal Stress 0.4 kg/cm²

Dial Displacement Dial Shear Shear Dial Displacement Dial Shear Shear Dial Displacement Dial Shear Shear
Horizontal Horizontal ΔH Proving Force Strength Horizontal Horizontal ΔH Proving Force Strength Horizontal Horizontal ΔH Proving Force Strength
(mm) Ring (kg) (kg/cm²) (mm) Ring (kg) (kg/cm²) (mm) Ring (kg) (kg/cm²)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
278 2.78 2.20 1.44 0.05 315 3.15 4.00 2.62 0.08 240 2.40 9.20 6.04 0.19
430 4.30 3.90 2.56 0.08 464 4.64 5.00 3.28 0.10 460 4.60 10.50 6.89 0.22
665 6.65 4.00 2.62 0.08 586 5.86 5.30 3.48 0.11 698 6.98 12.00 7.87 0.25
825 8.25 4.30 2.82 0.09 755 7.55 5.80 3.80 0.12 917 9.17 12.00 7.87 0.25
1120 11.20 4.30 2.82 0.09 951 9.51 5.90 3.87 0.12 1103 11.03 13.10 8.59 0.27
1330 13.30 4.60 3.02 0.10 1149 11.49 5.90 3.87 0.12 1304 13.04 13.00 8.53 0.27
1500 15.00 4.60 3.02 0.10 1342 13.42 5.90 3.87 0.12 1550 15.50 13.30 8.72 0.28
1820 18.20 4.40 2.89 0.09 1544 15.44 5.80 3.80 0.12 1785 17.85 13.50 8.86 0.28
1750 17.50 5.60 3.67 0.12 1995 19.95 13.40 8.79 0.28
1968 19.68 5.50 3.61 0.11 1998 19.98 13.13 8.61 0.27
2098 20.98 5.30 3.48 0.11

Tegangan (kg/cm²)
Normal Geser max
0.1 0.10
0.2 0.12
0.4 0.28

GRAFIK TEGANGAN GESER VS DISPLACEMENT GRAFIK TEGANGAN GESER MAX VS TEGANGAN GESER NORMAL
0.3

0.25 0.30

Beban 3,167 kg f(x) = 0.628571428571429 x + 0.02


R² = 0.947162426614482
0.2 Beban 6,334 kg
Tegangan Geser (kg/cm²)

Tegangan Geser (kg/cm²)


Beban 12,668 kg
0.20

0.15

0.1 Sudut Geser Dalam = 32,15°


0.10

0.05

0.00
0
0 5 10 15 20 25 0 0.1 0.2 0.3 0.4 0.5

Displacement (mm) Tegangan Normal (kg/cm²)

Shear Strength Result


Sudut Geser Dalam : 32,15°
Kohesi : 0,02 kg/cm²
APPROVED

M.SHOFFAR AL - HAFIZH

You might also like