Line of Manifolds

WAY MANIFOLDS
 OVERVIEW

Ham-Let ASTAVA offers a broad Ham-Let ASTAVA draws from a strong engineering heritage, as well as seasoned
2 line of 1,2,3,4,5 instrument business management, we offer a broad range of products – valves and manifolds
suitable for gas and liquid services - as well as full-service soluotions, that include
manifolds, all are available in custom engineering, design and manufacture of Instrument enclosures, modular
a wide range of materials and mounting systems, hook-up’s and interlocking solutions for critical conditions and
temperatures.
are fully compatible with the
requirements of the oil & Gas,
Petro-Chemical and Chemical
industries.
Beside this standard range of
products Ham-Let ASTAVA has
over 3,500 different types of
valves and manifolds available.

As a customer-focused company, Ham-Let ASTAVA provides high-quality products

and engineering solutions that address our customers’ business and technical
requirements.
For the Ham-Let ASTAVA line of manifolds we can offer scalability to design:
Choice of materials from AISI 316 to special alloy solutions for high toxic areas
Connections, Pressure and Temperature ratings varieties
Bonnet assemblies offer different stem, seal and material selections
Option for standard packing, O-Ring sealing and fugitive emmissons bonnets
Extensive range of valve configurations and flow schemes

With over 50 years of designing and manufacturing reliable products and solutions,
Ham-Let ASTAVA has acquired an outstanding reputation for quality and customer
service. We are always inspired by the need to evolve and stay ahead of the
ever changing marketplace.

INDEX
Overview 02
Manifold features and benefits 03
Bonnet and stem concept 04
Material of construction 05
1 Way line of Manifolds 06
Ordering information for 1-Way 08
2 Way line of Manifolds 09
Ordering information for 2-Way 11
3 Way line of Manifolds 12
Ordering information for 3-Way 15
4 Way line of Manifolds 16
5 Way line of Manifolds 17
Ordering information for 5-Way 20
Accessories 21
MANIFOLD FEATURES AND BENEFITS

The following unique features of the Ham-Let Astava Line of Instrument Manifolds enable
tailoring our high-quality products to the exact requirement of the customer and application: 3

TECHNICAL DATA
NACE MR-01-75 CERAMIC STEM BALL TIP Al2O3 BONNET SELECTIONS

All Manifolds comply to NACE Superior hardness prevents deformation O-ring stem-seal bonnet
MR-01-75 as standard. of the sealing tip and wear, significantly 1. No packing adjustment
increasing the life time of the product for
2. Extremely low operating torque
isolation purposes.
3. Compact design
4. Long life cycle
5. Sealing below stem thread
FULL TRACEABILITY 6. Metal-to-Metal bonnet option

Packing stem-seal bonnet

All products are fully traceable to its 1. Wide chemical compatibility range
components. 2. High temperature option (Grafoil®)
3. Low operating torque
4. Sealing below stem thread

WIDE VARIETY OF SEALING

MATERIALS
STEM MATERIAL
PTFE; Grafoil®; Viton®; NBR; EPDM;
Silicon; perfluorelastomer – provides wide
coverage of applications. ST. ST. 316 Ti with chromium
carbide diffusion coating
1. Long life cycle
2. Prevent galling

Features
Blowout-proof stem
Integrated back seat on stem for a secondary seal in the fully opened position
Safety stop pin – prevents the bonnet from detaching the body due to vibration
Stem seals below stem threads
A choice of O-ring materials
Oxygen clean per ASTM G-93 as an option
100% Factory Tested Compliance with MSS–SP–99
Direct mount flange design per IEC61518 and DIN19213 as an option
Working pressure range up to 690 bar (10,000 psig)
Working Temperature range up to 550°C (1022°F)
 BONNET AND STEM CONCEPT

The special sealing design applied in all HAM-LET’S VALVE BONNETS HAVE COLOR CODED RING
4 Ham-Let Astava Instrument Manifolds features a LABELS FOR SERVICE IDENTIFICATION:
non-rotating ceramic ball tip.
The chemical composition of a ceramic ball tip is superior in
hardness and functionality to a metal ball tip, eliminating sealing
tip deformation and significantly increasing the life time of the
product.

The stem threads are rolled and an integrated back seat

design is applied to the packing type of bonnet. Red: Blue: Green:
Applying a Stainless Steel 316 Ti stem with a chromium carbide Vent Valves Isolate Valves Equalize Valves
diffusion coating results in maximum operation cycles and
minimal risk of stem galling. Both packing and O-ring For severe-service applications, Ham-Let Astava
bonnets are designed with sealing below stem threads for Manifolds can be configured with a metal-to-metal
maximum protection of the stem threads. seal below the bonnet thread. A dust-ring attached to the
For maximum safety, the bonnet design prevents stem blowout, bonnet thread or tack-weld on the locking pin for extreme
and a locking pin prevents unintentional disassembling of the vibrating conditions.
bonnet.

Anti-Tamper*
PRESSURE AND TEMPERATURE RATING

Temperature (°F)
T-bar
0 130 230 330 430 530 630 730 830 932 1030 1130 1230
690 10000 Locking device
9000
600
8000
500
7000
Pressure (Psig)
Pressure (bar)

400 6000
5000
300
4000

200 3000
2000
100
1000
0 0
0 100 200 300 400 500 600 700
Temperature (°C) HANDLE OPTIONS
The standard handle of the HAM-LET ASTAVA Line of Instrument
Packing Manifolds is a stainless steel T-bar. For high pressure
Grafoil® Down to -50°C (-58°F)
Material applications of 10,000 psi (690 bar) an extended T-bar or hand
PTFE Down to -50°C (-58°F) wheel can be applied. Anti-tamper bonnet and key* lock options
O-Ring assure that the manifold is operated by qualified personnel only.
Viton® Down to -20°C (-4°F)
Material *Not included in order of Anti-Tampered bonnet manifold. This key should be
NBR Down to -34°C (-29°F) separately ordered.

Perfluor Down to -40°C (-40°F)

CLEANING
EPDM Down to -45°C (-49°F) All HAM-LET instrument manifolds are cleaned in accordance
with ASTAVA cleaning procedure WIQ-016. Oxygen clean is
10,000 psi (690 bar) Available upon request available in accordance with ASTM G-93.

TESTING
All HAM-LET instrument manifolds are factory tested with
Nitrogen at 800 psig (55 bar) based on MSS-SP-99. Seats have a
maximum allowable leak rate of 0.1 std cm3 /min.
Hydrostatic and Helium leak test is available upon request.
MATERIAL OF CONSTRUCTION

5
2

TECHNICAL DATA
3 2
2

1
4 7
7 1
1

5A

6A 10
Packing Bonnet
8
7

6B 5B

9
6B 5B
8
9

O-ring Bonnet
9

Metal-to-Metal Bonnet Bottom metal seal protects

bonnet’s threads from the
fluid. For fugitive emmissions
applications

Packing Bonnet O-ring Bonnet Metal-to-Metal Bonnet

No Part Qty. Material Qty. Material Qty. Material
1 Set Screw 1 St.St. 304 1 St.St. 304 1 St.St. 304
2 Bar Handle 1 St.St. 316L 1 St.St. 316L 1 St.St. 316L
3 Gland 1 St.St. 316L - - - -
4 Locking Nut 1 St.St. 316L - - - -
5A Pressure ring 1 St.St. 316L - - - -
5B Back-up ring - - 2 Virgin PTFE 2 Virgin PTFE
6A Stem Packing 1 Virgin PTFE - - - -
6B Stem O-ring - - 1 Viton® (Fluorocarbon FKM) 1 Viton® (Fluorocarbon FKM)
7 Bonnet 1 St.St. 316L 1 St.St. 316L 1 St.St. 316L
8 Stem 1 St.St. 316Ti Chrome- 1 St.St. 316Ti Chrome- 1 St.St. 316Ti Chrome-
Carbide diffusion coated Carbide diffusion coated Carbide diffusion coated
9 Ball 1 Ceramic (Al2O3) 1 Ceramic (Al2O3) 1 Ceramic (Al2O3)
10 Dust Protector - - - - 1 Viton® (Fluorocarbon FKM)
 1

WAY MANIFOLDS
STANDARD CONFIGURATION DIMENSIONS
1 WAY MANIFOLDS

6
Instrument

Dimensions
End Connection Ham-Let Ordering
Mount

Description A B C D E
Type

Process Instrument Vent / Bleed mm in mm in mm in mm in mm in

Remote 1/2” FNPT 1/2” FNPT - M-10S-10-8N-SS-V-T 70.0 2.76 - - 32.0 1.26 63.0 2.48 45.0 1.77
mount
1/2” FNPT 1/2” FNPT - M-10S-10-8N-SS-T-T 70.0 2.76 - - 32.0 1.26 79.0 3.11 50.0 1.97
1/2” MNPT 1/2” FNPT 1/2” FNPT M-11S-85-8N-SS-V-T 110.0 4.33 38.0 1.50 32.0 1.26 63.0 2.48 45.0 1.77
1/2” MNPT 1/2” FNPT 1/2” FNPT M-11S-85-8N-SS-T-T 110.0 4.33 38.0 1.50 32.0 1.26 79.0 3.11 50.0 1.97

NEEDLE VALVE
M-10S-10-8N-SS-V-T
E
"INSTRUMENT"

"PROCESS"
1/2-14 NPT
1/2 - 14 NPT

D Open

C
A

MULTIPORT VALVE
M-11S-85-8N-SS-V-T
E
1/2 - 14 NPT (x3)
"INSTRUMENT"

"PROCESS"
1/2-14 NPT

D Open

B
C A
 1

WAY MANIFOLDS
STANDARD CONFIGURATION DIMENSIONS
1 WAY MANIFOLDS

7
Instrument

Dimensions
End Connection Ham-Let Ordering
Mount

Description A B C D E
Type

1 WAY LINE OF MANIFOLDS

Process Instrument Vent / Bleed mm in mm in mm in mm in mm in
Remote 1/2” MNPT 1/2” FNPT 1/2” FNPT M-11S-85-8N-SS-V-T-L 184.0 7.24 38.0 1.50 32.0 1.26 63.0 2.48 45.0 1.77
mount
1/2” MNPT 1/2” FNPT 1/2” FNPT M-11S-85-8N-SS-T-T-L 184.0 7.24 38.0 1.50 32.0 1.26 79.0 3.11 50.0 1.97
1/2” MNPT 1/2” FNPT 1/4” FNPT M-12M-85-8N-SS-V-T-P 100.0 3.54 30.0 1.18 32.0 1.26 63.0 2.48 45.0 1.77
1/2” MNPT 1/2” FNPT 1/4” FNPT M-12M-85-8N-SS-T-T-P 100.0 3.54 30.0 1.18 32.0 1.26 79.0 3.11 50.0 1.97

EXTENDED MULTIPORT VALVE

M-11S-85-8N-SS-V-T-L

E
"INSTRUMENT"
1/2-14 NPT (x3)

D Open

"PROCESS"
C B 1/2-14 NPT
A

GAUGE VALVE
M-12M-85-8N-SS-V-T-P
E
"INSTRUMENT"
1/2-14 NPT

“PROCESS”
1/2-14 NPT

D Open

“VENT/TEST”
1/4-18 NPT
C
B
A
 1

WAY MANIFOLDS
ORDERING INFORMATION
1 WAY MANIFOLDS

M-1 0 S 10 8 N SS T LD OC
8
Family End Type End Body Material Packing Option
Connection Connection
1 Way Female Oxygen
M-1 Manifold
00 Integral Let-Lok
N NPT SS SS 316 T PTFE OC Clean

Female to Lubricant
10 G BSPP M Monel 400 G Grafoil® LF
Female Free
Flow
Scheme 10,000 psi
80 Male to Male R BSPT D Duplex 1.4462 V Viton® K
(690 bar)
0
Female integral Extended
85 Male to Female L HC Alloy C-276 EP EPDM L
Let-Lok Inlet
1 (See table A)
Bleed
75 Female to Male T Titanium BU NBR B
valve
2
SD SuperDuplex KZ Kalrez® P Blind plug

Size
Valves A6 Alloy 625
Position
4 1/4” Handle
S Straight A8 Alloy 825
6 3/8” T T bar
Angle
M Anti
Square
8 1/2” AT
Tamper
(See table A)
Locking
LD
device

Table A: Flow Schematic and Valve Position

Flow Valves Sketch

Designator
Schematic Position

0 S

1 S

2 M

Warning! For your safety

The system designer and user have the sole responsibility for selecting products
suitable for their special application requirements, ensuring their safe and
trouble-free installation, operation, and maintenance. Application details,
material compatibility and product ratings should all be considered for each
selected product. Improper selection, installation or use of products can cause
property damage or personal injury.
 2

WAY MANIFOLDS
STANDARD CONFIGURATION DIMENSIONS
2 WAY DIRECT MOUNT

Dimensions
9
Mount Type
Instrument

End Connection
Ham-Let
Ordering Description A B C D E F

2 WAY LINE OF MANIFOLDS

Process Instrument Vent / Bleed mm in mm in mm in mm in mm in mm in

Direct 1/2” FNPT *Flange 1/4” FNPT M-20S-15-8NF-SS-V-T 85 3.35 - - 65.0 2.56 182 7.17 32.0 1.26 5.0 0.20
Mount *Flange *Flange 1/4” FNPT M-20H-90-FF-SS-V-T 153 6.02 - - 56.0 2.20 78 3.07 65.0 2.56 20.0 0.79

* Flange Standard per IEC 61518-A

M-20S-15-8NF-SS-V-T

D
A

"PROCESS"
1/2-14 NPT
M8-6H ( 4x )
"INSTRUMENT"

"VENT/PURGE"
1/4-18 NPT
45,0 (1.77)

41,3 (1.63)
ISOLATE

VENT

F Ø12.0 (X2) (0.47) E

16,0 (0.63)

M-20H-90-FF-SS-V-T
"INSTRUMENT"
"PROCESS"

D A
C
41,3 (2x)
(1.63)

(1.77)
45,0
E
Ø12,0 ( 2x )
7/16-20 UNF ( 2x )

(Ø0.47)

Ø 8.2 (Ø 0.32)
F
VENT

ISOLATE

"VENT"
1/4-18 NPT
 2

WAY MANIFOLDS
STANDARD CONFIGURATION DIMENSIONS
2 WAY REMOTE MOUNT

10
Instrument

Dimensions
End Connection Ham-Let
Mount

Ordering Description A B C D E F
Type

Process Instrument Vent / Bleed mm in mm in mm in mm in mm in mm in

Remote 1/2” FNPT 1/2” FNPT 1/4” FNPT M-20M-10-8N-SS-V-T 79 3.11 79.0 3.11 32.0 1.26 92.0 3.62 32 1.26 26 1.02
Mount 1/2” FNPT 1/2” FNPT 1/4” FNPT M-21A-10-8N-SS-V-T 107 4.21 79.4 3.13 65.0 2.56 65.0 2.56 32 1.26 35 1.38
1/2” FNPT 1/2” FNPT 1/4” FNPT M-21S-10-8N-SS-V-T 156 6.14 - - 65.0 2.56 59.0 2.32 32 1.26 18 0.71

M-20M-10-8N-SS-V-T
D
45.0(1.77)

"INSTRUMENT"

"PROCESS"
1/2-14 NPT
1/2-14 NPT
VENT "VENT" ISOLATE
1/4-18 NPT
A
E

M8-6H ( 2x )
20,0 (0.79)

C
B F

M-21A-10-8N-SS-V-T
D
45.0 (1.77)
1/4-18 NPT
"VENT"

NT
VE
M8-6H ( 2x )
A

32,0
(1.26)
"INSTRUMENT"
C

1/2-14 NPT
ISOLATE

"PROCESS"
1/2-14 NPT
E
B

M-21S-10-8N-SS-V-T
A
D
32.0 (1.26)

"INSTRUMENT"
1/2-14 NPT
E

M8-6H ( 2x )
F

45,0 (1.77)
ISOLATE
VENT
C

"VENT" 1/4-18 NPT "PROCESS" 1/2-14 NPT

 2

WAY MANIFOLDS
ORDERING INFORMATION
2 WAY MANIFOLDS

11
M-2 0 M 10 8 N SS T LD OC

2 WAY LINE OF MANIFOLDS

End Type End
Family Body Material Packing Option
Connection Connection
2 Way Female Oxygen
M-2 Manifold
00 integral Let-Lok
FF Flange* SS SS 316 T PTFE OC Clean

Female to 10,000 psi

10 N NPT M Monel 400 G Grafoil® K
Female (690 bar)
Flow
Scheme Vent port
80 Male to Male G BSPP D Duplex 1.4462 V Viton® V
1/2”
0
Bleed
(See table A) 85 Male to Female R BSPT HC Alloy C-276 EP EPDM B
valve
1
15 Female to Flange NF NPT to Flange* T Titanium BU NBR P Blind plug

Valves 90 Flange to Flange RF BSPT to Flange* SD SuperDuplex KZ Kalrez®

Position

A Angle Flat GF BSPP to Flange*

Size Handle
Female integral
S Straight L
Let-Lok
8 1/2” T T bar
Angle * Flange Standard per IEC 61518-A
M Anti
Square AT
4 1/4” Tamper
H H- Type Locking
6 3/8” LD
device
(See table A)

Table A: Flow Schematic and Valve Position

Flow Valves Sketch

Designator
Schematic Position

0 H

1 Warning! For your safety

The system designer and user have the sole responsibility for selecting products
suitable for their special application requirements, ensuring their safe and
A trouble-free installation, operation, and maintenance. Application details,
material compatibility and product ratings should all be considered for each
selected product. Improper selection, installation or use of products can cause
property damage or personal injury.
 3

WAY MANIFOLDS
STANDARD CONFIGURATION DIMENSIONS
3 WAY DIRECT MOUNT

12
Instrument

Dimensions
End Connection Ham-Let Ordering
Mount

Description A B C D E F
Type

Process Instrument Vent / Bleed mm in mm in mm in mm in mm in mm in

Direct 1/2” FNPT *Flange - M-30H-15-8NF-SS-V-T 181.0 7.13 95.0 3.74 86.0 3.39 79.0 3.11 66.0 2.60 20.0 0.79
mount
1/2” FNPT *Flange - M-30I-15-8NF-SS-V-T 161.0 6.34 107.0 4.21 65.0 2.56 150.0 5.91 32.0 1.26 16.0 0.63

M-30H-15-8NF-SS-V-T * Flange Standard per IEC 61518-A

A
C
45.0 (1.77)
D
"PROCESS"(2x )
1/2-14 NPT

EQUALIZE
41.3(2X) (1.63)
B

ISOLATE

ISOLATE
E

12.0 (X4) 0.47

"INSTRUMENT"
8.2 (0.32)
F

54.0 (2X)
2.13

M-30I-15-8NF-SS-V-T

E
45,0 (1.77)

E
ALIZ
EQU
B
"INSTRUMENT"
41,3 (1.63)

12.0 (x4) (0.47)

C
"PROCESS" (2x)

M8-6H (2x)
1/2-14 NPT

F
32,0 (1.26)
E
54,0 (2.13)

120,0 (4.72)

E
 3

WAY MANIFOLDS
STANDARD CONFIGURATION DIMENSIONS
3 WAY DIRECT MOUNT

13
Instrument

Dimensions
End Connection Ham-Let Ordering
Mount

Description A B C D E F
Type

3 WAY LINE OF MANIFOLDS

Process Instrument Vent / Bleed mm in mm in mm in mm in mm in mm in
Direct 1/2” FNPT *Flange - M-30A-15-8NF-SS-V-T 210.0 8.27 106.0 4.17 65.0 2.56 115.0 4.53 32.0 1.26 16.0 0.63
mount
*Flange *Flange - M-30H-90-FF-SS-V-T 181.0 7.13 95.0 3.74 86.0 3.39 79.0 3.11 66.0 2.60 - -

* Flange Standard per IEC 61518-A

M-30A-15-8NF-SS-V-T

A
D

"INSTRUMENT"

12.0 (4X) 0.47 ALIZ

E
EQU B
41,3 (2x) (1.63)
45.0 (1.77)

ISOLATE
ISOLATE

C
"PROCESS" ( 2x )
1/2-14 NPT

M8-6H (2x) F
32.0 (1.26) E
54.0 (2.13)

M-30H-90-FF-SS-V-T

A
C
54
D 45 (1.77)

EQUALIZE
B

41.3 (x2)
(1.63)

ISOLATE

ISOLATE
E

7/16-20 UNF-2B (4x)

 3

WAY MANIFOLDS
STANDARD CONFIGURATION DIMENSIONS
3 WAY REMOTE MOUNT

Ham-Let Ordering Dimensions

14
Instrument

Description
End Connection
Mount

A B C D E F
Type

Process Instrument Vent / Bleed mm in mm in mm in mm in mm in mm in

Remote 1/2” FNPT 1/2” FNPT - M30S-10-8N-SS-V-T 185.0 7.28 79.0 3.11 65.0 2.56 90.0 3.54 32.0 1.26 17.0 0.67
mount
1/2” MNPT 1/2”FNPT 1/4” FNPT M32M-85-8N-SS-V-T 135.0 5.31 87.0 3.43 40.0 1.57 112.0 4.41 40.0 1.57 - -

M-30S-10-8N-SS-V-T

A
D
54,0 (2.13)
"INSTRUMENT"(2x)
n12,0 (0.47) 1/4-14 NPT
F

45,0 (1.77)
ISOLATE
ISOLATE

C
EQUALIZE

"PROCESS"(2x)
1/4-14 NPT
E
54,0 (2.13)
B

M-32M-85-8N-SS-V-T

ISOLATE
A
C

ISOLATE
"INSTRUMENT"
1/2-14 NPT

45,0(1.77)
"PROCESS"
1/2-14 NPT

VENT
B
E

"VENT"
1/4-18 NPT
33,0(1.30)

D
 3

WAY MANIFOLDS
ORDERING INFORMATION
3 WAY MANIFOLDS

M-3 0 S 10 8 N SS T LD OC
15
Family End Type End Body Material Packing Option

3 WAY LINE OF MANIFOLDS

Connection Connection
3 Way Female Oxygen
M-3 Manifold 00 FF Flange* SS SS 316 T PTFE OC Clean
integral Let-Lok

Female to 10,000 psi

10 N NPT M Monel 400 G Grafoil® K
Female (690 bar)
Flow
Scheme Vent port
80 Male to Male G BSPP D Duplex 1.4462 V Viton® V
1/2”
0
85 Male to Female R BSPT HC Alloy C-276 EP EPDM P Blind plug

1 (See table A)
15 Female to Flange NF NPT to Flange* T Titanium BU NBR

2
90 Flange to Flange RF BSPT to Flange* SD SuperDuplex KZ Kalrez®

Valves GF BSPP to Flange*

Position
Size Handle
Female integral
A Angle Flat L
Let-Lok
4 1/4” T T bar
* Flange Standard per IEC 61518-A
S Straight
Anti
6 3/8” AT
Tamper
Angle
M
Square Locking
8 1/2” LD
device
H H- Type

I In - line Table A: Flow Schematic and Valve Position

(See table A) Flow Valves
Designator Sketch
Schematic Position

0
I

1 I

Warning! For your safety

The system designer and user have the sole responsibility for selecting products
suitable for their special application requirements, ensuring their safe and
trouble-free installation, operation, and maintenance. Application details,
material compatibility and product ratings should all be considered for each 2 M
selected product. Improper selection, installation or use of products can cause
property damage or personal injury.
 4

WAY MANIFOLDS
STANDARD CONFIGURATION DIMENSIONS
4 WAY REMOTE MOUNT

16
Instrument

Dimensions
End Connection Ham-Let Ordering
Mount

Description A B C D E F
Type

Process Instrument Vent / Bleed mm in mm in mm in mm in mm in mm in

Direct 1/4” FNPT *Flange 1/4” FNPT M-40H-15-4NF-SS-V-AT 208.0 8.18 - - 95.0 3.74 110.0 4.33 60.0 2.36 - -
mount
1/4” BSPP *Flange 1/4” BSPP M-40T-15-4GF-SS-V-AT 236.0 6.29 42.0 1.65 94.0 3.69 138.0 5.43 32.0 1.24 16.0 0.63

* Flange Standard per IEC 61518-A

M-40H-15-4NF-SS-V-AT
C 54.0 (2.13)
M8-6H (4x)
55.0 (2.17)
45.0 (1.77)
E

Ø12 (4x) (0.47) “VENT” 1/4-18 NPT

"INSTRUMENT"
EQUALIZE

VENT
ISOLATE
ISOLATE

“PROCESS”
1/4-18 NPT (2x)

D
A

M-40T-15-4GF-SS-V-AT
157.0 (6.18)

“VENT”
12.0 (4x) (0.47) 1/4-18 BSPP
V
E
N
T
45.0 (1.77)
C

41.3 (1.63)
ISOLATE

ISOLATE

M8-6H (2x)

F 32.0
(1.26)
E
54.0 (2.13) 33.0
B (1.30)

D
A
"INSTRUMENT"

“PROCESS” 1/4 BSPP (2x)

 5

WAY MANIFOLDS
STANDARD CONFIGURATION DIMENSIONS
5 WAY DIRECT MOUNT

17
Instrument

Dimensions
End Connection Ham-Let Ordering
Mount

Description A B C D E F
Type

5 WAY LINE OF MANIFOLDS

Process Instrument Vent / Bleed mm in mm in mm in mm in mm in mm in
Direct 1/2” FNPT *Flange 1/4” FNPT M-50A-15-8NF-SS-V-T 265.0 10.43 41.0 1.61 106.0 4.17 170.0 6.69 32.0 1.26 16.0 0.63
mount
1/2” FNPT *Flange 1/4” FNPT M-53T-15-8NF-SS-V-T 220.0 8.66 79.0 3.11 122.0 4.80 140.0 5.51 32.0 1.26 16.0 0.63

* Flange Standard per IEC 61518-A

M-50A-15-8NF-SS-V-T

45.0 (1.77)
B

ISOL E EQUALIZE ISOL E

AT AT

C
65.0 (2.56)

12.0 (4x) (0.47)

41.3 (1.63)
VENT

VENT

M8-6H (2x)

VENT (2x) 32.0 B

"INSTRUMENT"

1/4-18 NPT (1.26)

E
PROCESS 54.0 (2.13)
(2x) 1/2-14
NPT 110.0 (4.33)
148.0 (5.83)

D
A

M-53T-15-8NF-SS-V-T

A F
54.0 (2.13)
12.0 (x4) 32.0 (1.26)
(0.47) M8-6H (x2)
EQ
LIZ

U
UA

AL

VENT
EQ

IZ

100.0 (3.94)
45.0 (1.77)

C
ISOLATE

INSTRUMENT
41.3 (1.63)

"TEST"( 2x )
1/4-18 NPT
PROCESS (2x)
1/2-14 NPT VENT
1/4-18 NPT
E
54.0 (2.13)
B
A
 5

WAY MANIFOLDS
STANDARD CONFIGURATION DIMENSIONS
5 WAY DIRECT MOUNT

18
Instrument

Dimensions
End Connection Ham-Let Ordering
Mount

Description A B C D E F
Type

Process Instrument Vent / Bleed mm in mm in mm in mm in mm in mm in

Direct
mount *Flange *Flange 1/4” FNPT M-54H-90-FF-SS-V-T 210.0 8.27 108.0 4.25 105.0 4.13 115.0 4.53 60.0 2.36 12.5 049

* Flange Standard per IEC 61518-A

M-54H-90-FF-SS-V-T

A B
41.3 (X2) (1.63)
D "INSTRUMENT"
54.0(2.13)
54.0 (1.77)

EQUALIZ

ISOLATE

VENT

12.0 (X4) (0.32)

C

7/16-20 UNF (4x )

ISOLATE

ISOLATE

M8-6H (2X) PROCESS

F "VENT"
9.0 (0.35)

1/4-18 NPT
41.3 (2x ) (1.63)
54.0 (2.13)
90.0 (3.54) E
 5

WAY MANIFOLDS
STANDARD CONFIGURATION DIMENSIONS
5 WAY REMOTE MOUNT

19
Instrument

Dimensions
End Connection Ham-Let Ordering
Mount

Description A B C D E F
Type

5 WAY LINE OF MANIFOLDS

Process Instrument Vent / Bleed mm in mm in mm in mm in mm in mm in
Remote 1/2” FNPT 1/2” FNPT 1/4” FNPT M-53S-10-8N-SS-V-T 210.0 8.27 80.0 3.15 113.0 4.45 115.0 4.53 32.0 1.26 45.0 1.77
mount
1/2” FNPT 1/2” FNPT 1/4” FNPT M-50A-10-8N-SS-V-T 265.0 10.43 41.0 1.61 106.0 4.17 170.0 6.69 32.0 1.26 16.0 0.63

M-53S-10-8N-SS-V-T

A
D
54.0 (2.13)
INSTRUMENT
(2x) 1/2-14 NPT
45.0 (1.77)

EQUALIZ

EQUALIZ

VENT

100.0 (3.94)

"TEST PLUG" (2x)

C

1/4-18 NPT M8-6H (2x)

C
ISOLATE
ISOLATE

VENT PROCESS (2x)

1/4-18 NPT 1/2-14 NPT
B
32.0 (1.26)
B
54.0 (2.13)

M-50A-10-8N-SS-V-T

45,0 (1.77) B

E
ISOL E EQUALIZE ISOL E LAT
AT AT ISO
C

12.0X4 (0.47)
65.0 (2.56)
VENT
VENT

PROCESS M8-6H (x2)

F
"INSTRUMENT" ( 2x )

32.0
41.3(1.63)

(2x)
1/2-14 NPT (1.26) E
54.0 (2.13)
"VENT" ( 2x )

1/2-14 NPT
1/4-18 NPT

110.0 (4.33)
148.0 (5.83)

D
A
 5

WAY MANIFOLDS
ORDERING INFORMATION
5 WAY MANIFOLDS

20 M-5 0 A 10 8 N SS T LD OC

Family End Type End Body Material Packing Option

Connection Connection
5 Way Female Oxygen
M-5 00 FF Flange* SS SS 316 T PTFE OC Clean
Manifold integral Let-Lok

Female to Lubricant
10 N NPT M Monel 400 G Grafoil® LF
Female Free
Flow
Scheme 10,000 psi
15 Female to Flange G BSPP D Duplex 1.4462 V Viton® K
(690 bar)
0 Vent port
90 Flange to Flange R BSPT HC Alloy C-276 EP EPDM V
1/2”
1
NF NPT to Flange* T Titanium BU NBR P Blind plug

2 (See table A)
RF BSPT to Flange* SD SuperDuplex KZ Kalrez®
Handle
3
GF BSPP to Flange* T T bar
4 Female integral
L Anti
Let-Lok AT
Tamper
Size
* Flange Standard per IEC 61518-A Locking
Valves LD
Position device
4 1/4”

A Angle Flat Table A: Flow Schematic and Valve Position

6 3/8”
Flow Valves Sketch
Designator
S Straight Schematic Position
8 1/2”

T Taper 0 A

H H- Type

(See table A)
1 A

2 T

3
S

Warning! For your safety

The system designer and user have the sole responsibility for selecting products
suitable for their special application requirements, ensuring their safe and
trouble-free installation, operation, and maintenance. Application details, 4 A
material compatibility and product ratings should all be considered for each
selected product. Improper selection, installation or use of products can cause
property damage or personal injury.

I
 A

ACCESSORIES
BLEED VALVE

1/4” MNPT
M-01-4N-SS
1/2” MNPT
M-01-8N-SS
21
36

ACCESSORIES
HEX 14
HEX 27

A
A-A
HEX 10 HEX 14

A-A A

62
37
"VENT"

"VENT/PURGE"
Ø3

1/8 - 27 NPT
A
"PROCESS" A
1/2-14 NPT
"PROCESS"
1/4-18 NPT

BLIND PLUG

1/4” MNPT 1/2” MNPT

M-02-4N-SS M-02-8N-SS

HEX 27
HEX 14
17

30

1/4-18 NPT

1/2-14 NPT

MOUNTING GASKET IEC 61518-A

PTFE GRAFOIL®
M-03-GK-IECA-T M-03-GK-IECA-G

Ø17.7 Ø18

Ø25.1
Ø24
2.9
2.7

Kit contains: 2 Gaskets Kit contains: 2 Gaskets

 A

ACCESSORIES
MOUNTING BRACKET - AISI 316

WALL MOUNTING
22 M-04-MK
72

32

20
90

72
58.5

48.5

2 Ø9 (x9)

32 90

Kit contains: Bracket, 2x Bolts M8X12.

Upon order, Please make sure that the Manifold is suitable for bracket mounting.

MOUNTING BRACKET - AISI 316 72

PIPE MOUNTING - 2 INCH 32

M-04-MK-P 20
72
90

58.5

48.5

2 Ø9 (x9)

32 90

Kit contains: Bracket, 2x Bolts M8X12, 2x Tie rod, 2x Tie rod brackets, 4x Snapnut M8.
Upon order, Please make sure that the Manifold is suitable for bracket mounting.
 A

ACCESSORIES
GAUGE CONNECTOR

36O° POSITIONING MALE TO FEMALE 36O° POSITIONING MALE TO MALE

M-05-85-8N-SS M-05-80-8N-SS 23

ACCESSORIES
HEX 32 HEX 32

1/2-14 NPT 1/2-14 NPT

76

84
HEX 16

HEX 16

1/2-14 NPT
1/2-14 NPT

ANTI TAMPER KEY

5 MM
M-06-KEY-5MM
60
53

Not included in order of Anti-Tampered bonnet manifold.

This key should be separately ordered.

Warning! For your safety

The system designer and user have the sole responsibility for selecting products suitable for their special application
requirements, ensuring their safe and trouble-free installation, operation, and maintenance. Application details, material
compatibility and product ratings should all be considered for each selected product. Improper selection, installation or
use of products can cause property damage or personal injury.

® Grafoil – TM UCAR Carbon Company Inc.

® Viton, Kalrez – TM DuPont
Quality you can trust

Ham-Let USA: Ham-Let Germany: Ham-Let Singapore:

Ham-Let Aatava Manifold catalog Rev_03 3902174. Photography: warhaftig-venezian, printed Jan. 2013
12565 West Airport Blvd. Dornacher Strasse 3a 211 Woodlands Avenue 9 Spectrum II
Sugar Land, Texas 77478 D-85622 Feldkirchen building #05-88 Singapore 738960
Tel: +1 281 5664900 Tel: +49 89 90778060 Tel: +65 62578313
Fax: +1 281 5664910 Fax: +49 89 90778070 Fax: +65 62578315
e-mail: [email protected] e-mail: [email protected] e-mail: [email protected]

Ham-Let Canada: Ham-Let France:

3190 Ridgeway Drive, Unit 33 Siège Social : PARK AVENIR Ham-Let Motoyama Japan HMJ
Mississauga, Ontario, L5L 5S8 Zone de Sacuny Ham-Let Motoyama Japan (HMJ)
Tel: +1 905 6089996 Avenue Marcel MERIEUX Shin-nihonbashi nagaoka-2 bldg 3f,
Fax: +1 905 6088661 bâtiment B7, 69530, BRIGNAIS 1-10-9,Horidome-cho,nihonbashi,
e-mail: [email protected] Tél: +33 4 78950342 Chuo-ku, tokyo, 103-0012 japan
Fax: +33 4 72310576 Tel: +81-3-3668-5321
Ham-Let UK: e-mail: [email protected] Fax: +81-3-3664-7027
Unit 1, Lindfield Enterprise Park
Lewes Road, Lindfield Ham-Let Russia:
Haywards Heath, West Sussex 127083 Moscow
RH16 2LH 8th March str. 10 building 12
Tel: +44 1444 487555 office 207
Fax: +44 1444 487666 Tel/Fax: + 7 495 651 62 38
e-mail: [email protected] e-mail: [email protected]

www.ham-let.com