Driven by the

power of knowledge

Automotive Aftermarket
Training Programme Guide – 2021
www.boschtraining.in

Building Competence
for the Future

Training Technical Vehicle

Hotline Diagnosis

1
 Bosch – more than
130 years of System
Innovation and
Automotive Technology
Dear Business Partners and Customers,

Vehicles today have become technologically advanced,

yet increasingly complex and presenting newer
challenges with the advent of modern technologies.
With the BS 6 implementation in India around
the corner, new generation vehicles are equipped
with technologies such as EGT i.e., exhaust gas
treatment. At the repair and maintenance level, there
is an increasing emphasis on technological know-
how in premium segment car range. When equipped
with necessary expertise, workshop technicians
carry out repair and maintenance efficiently and
effectively. Clearly defined and well-structured
training programmes are essential to ensure that your
business keeps pace with the latest developments in
the automotive domain.
At Bosch, our range of courses are industry-
recognized and of the highest standards. Through our
training sessions, you will receive in-depth knowledge
of the evolving technologies, and at the same time,
hands-on experience with the latest equipment, from
staff who are highly knowledgeable and experienced.
Some of the key benefits of Bosch automotive training
programmes for your workshop include:
▶ Faster troubleshooting with latest
diagnostic solutions
▶ Effective customer service
▶ Improved customer satisfaction and
long-term customer loyalty
▶ Business success
Bosch Training Centres across India assist in your
business development by imparting an extensive and
highly relevant portfolio of technical and non-technical
education and training programmes, along with our
highly valued certifications.
We, at the Bosch Automotive Aftermarket division,
are happy to present to you the all-new
Automotive Aftermarket Training Programme
Guide for 2021. This guide consists of a
comprehensive list of technical and non-
technical courses on our products and services.
Join us on any of the training courses held
throughout the year, and we will help you to get the
best out of your business.
Visit our website www.boschtraining.in for
more information about our training
programmes. You may additionally plan and
organize the training and education programmes on
our easy-to-use and clearly structured web interface.

Yours sincerely,
Bosch Training Team

2 3
 Training Centres

The Bosch Training Centre Bengaluru

Corporate Office:

Bosch Limited
Kanteerava
Stadium
Automotive Aftermarket
P. O. Box No: 3000
Hosur Road, Adugodi
Bengaluru - 560 030, Karnataka
Mobile: +91 97399 43263
E-Mail: [email protected]

Bosch Limited
Bosch Training Centre, Naganathapura Plant
Electronics City P. O., Post Box No: 6887
Bengaluru – 560 100, Karnataka
Ph.: +91 87544 55400
Telefax: (080) 2852 1239 / 2852 1608
E-mail: [email protected]

BENGALURU
BTC

The Bosch Training Centre with state-of-the-art facilities / equipment was established in the year
2005 and has facilities for training and testing various automotive products and vehicles besides
diagnostics on vehicles fitted with Electronic Control Unit. Built over an area of 800 sq.m., it North Region
has a separate Vehicle Area, Diesel Workshop, Auto Electrical Workshop, Technical Library, and
two modern Lecture Halls with state-of-the-art audio / video equipment and projection system.
A variety of training films and cut-away & transparent models make the learning process interesting
and enjoyable.

Manned by qualified and experienced staff, the Bosch Training Training Centre conducts a variety
of training programmes to meet various customer requirements. The level of participants ranges
from Mechanics and Managers / Proprietors to Engineers and Senior Executives drawn from Bosch
Authorised Representatives, OE customers and their dealers, Defence Establishments, State New Delhi
Transport Undertakings, and Fleet Operators as well as Educational Institutions. A number of
overseas customers have also participated. Bosch Limited (RTC)
Bosch Training Centre
C/o Sunehri Exports, Plot No: B-1 / E24
Mohan Co-operative Industrial Estate
Mathura Road, New Delhi – 110 044
Mobile: +91 98713 07355
E-mail: [email protected] NEW DELHI

4 5
 South Region
Gr
Training Centres & Trainers

Ramasamy Rd
eam
sL
n
Punjab
Hanu Reddy National
Residences

Rd

oh
a mm
ed
Chennai
M
fee

Ran
a
Sh
Model School Rd

Joint Certification Centre

go
on
British
C/o: M/s. Bharath University

St
Council

173, New Agaram Road, Selaiyur

GAA 2nd St
GAA 3rd St

Overhead
Tank Prestige
Palladium ght
s
Chennai – 600 073, Tamil Nadu Bosch
Li
Ph.: +91 87544 55400 Training Centre
Gre

d
s an
ou
am

Th E-mail: [email protected] Bengaluru

sR
GMM S

oad

rd St
t

uluk 3
Aziz M

East Region

Shweta Magazine Kiran Nair

Kolkata Bengaluru Bengaluru

Joint Certificate Centre

C/o: MCKV Institute of Engineering,
243, G.T.Road(N), Liluah
(RTC)
Howrah-711204, West Bengal, India
Ph.: +91 91638 22255 Bosch Training Bosch Training Bosch Training Bosch Training
E-mail: [email protected] Centre Centre Centre Centre
North East West South

West Region

Parag Kavthekar Sanjib Ghosh Trupti Sawant Kiran Nair

North East West South
Ganpathi Temple
Pirbaba Darga
Pr
id

Pune
e
W
or
ld
Ci
ty
Rd

Khandoba Temple

(JCC) Joint Certification Centre

D
Y

C/o: D. Y. Patil School of Engineering

Pa
til
Rd

Janardhan
Nagar
Sr. No. 124 & 126, At-post: Ambi
Shivaji
Maharaj Statue
MIDC Road, Tal Maval, Talegaon Dabhade
Pune – 410 506, Maharashtra
Rd
ty
Ci
r ld
Wo
Pr
ide

PUNE Ph.: +91 90820 07650

E-mail: [email protected]

6 7
 Contents SMART TRANING FOR A SMARTER FUTURE

Courses on Diesel Fuel Injection 12

SERVICE DIAGNOSIS AND
SOFTWARE SOLUTION
Diagnostic Software
ESI[tronic] 2.0
2018/3

Truck
OHW 1
OHW 2
Courses on Workshop and Test Equipment 20
Windows® 7 SP1 (32/64 bit)
Windows® 8 (32/64 bit)
Windows® 10 (32/64 bit)

FD 2018-01, V 11.0.2493
1 987 729 601 - 1 987 P10 546 999

© 2018 Robert Bosch GmbH, All rights reserved

www.bosch-workshop-world.com
Made in Germany

Courses on Basic Products & Process Knowledge 22

Courses for Bosch Car Service Personnel 28

Courses for Express Bike Service Personnel 35

Courses for Area Managers – Sales, & Area Managers 37

Courses for Institutional Customers & STUs (State Transport Unions) 42

Courses for OE and OECDs 45

Courses for Educational Institutions 47

TRAINING PRODUCTS

“ The future of our industry,

and any progress in the technical field
depends on the training of

”
capable mechanics and technicians.

- Robert Bosch

8 9
 Bosch Automotive Aftermarket Training
The Challenge
Regardless of whether it is a novice or a professional, successful result. The customer must wait longer to get
there are always situations when vehicle specialists get her / his vehicle back. It is precisely at this point that
in contact with new technologies or unknown faults. In Bosch brings in its offer of training various categories of
such situations, troubleshooting and problem-solving professionals in a wide range of technical areas.
could become time-intensive or possibly will not have a

The Bosch offers training courses in the following areas:

Offer

The Offer
Diesel Braking Vehicle Vehicle
Technology Systems Diagnostics Electronics

Diesel System Training Series Vehicle

Technicians Technicians – Personnel Electrical
Systems

Diesel Mechanics Aftersales Gasoline

Components Service Injection

The Advantage

Courses on Diesel Fuel Injection

Bosch's knowledge and Improving service quality Practice-oriented

experience are unique and accelerating processes training courses
 Over 130 years of The current training offer with  Constant update of
experience in the automobile the support of Bosch Knowledge technical knowledge in
industry Database helps you: vehicle technologies
 Preferredsupplier of original  Localize problems faster,  Workshops with structured
equipment and systems for repair more vehicles, and training management
many leading manufacturers reduce your customers' and continuous education
worldwide waiting time management
 In-depth knowledge in  Improve productivity through  Practice-oriented, hands-on
latest technologies various methodic procedures training courses conducted
by highly qualified trainers

10 11
 Courses on Diesel Fuel Injection Courses on Diesel Fuel Injection
Training on Diesel Fuel Injection (PE A Type & VE Mech.) Training on Common Rail System (CP3, CP4, CB18, & Injector)

Course Code: EP - X Course Code: CR - 2

Duration: 10 days Duration: 3 days

Place: BTC (Naganathapura, Bengaluru) Place: BTC (Naganathapura, Bengaluru)

Objective: To make participants competent in carrying out quality service on Diesel Fuel Injection Objective: Technicians from BDS and OEMs equipped with EPS 815 and having experience in handling all
Equipment with more hands-on training. types of existing Fuel Injection Systems.

Participants: Fuel Injection Equipment Service Personnel, preferably Bosch Authorised Representatives. Participants: Technicians from BDS and OEMs equipped with EPS 815 and having experience in handling all
types of existing Fuel Injection Systems.
Course Content: Working Principles, Repair, and Testing of PE A Type, Multi-cylinder Fuel Injection Pump with
RSV and RQV Governors, VE Distributor-type Fuel Injection Pump, Add-on Modules fitted on Course Content: Structure, Function of Common Rail High-Pressure Pumps and Injectors (CP3, CPN2.2, CB18, &
PE A and VE Pumps, Injector, Injection Timer, Feed Pump and Filters, Injection Timing Setting CRIN), Characteristics of, and Testing on the Pump Test Bench EPS 815 with KMA Measuring
on Diesel Engine, Safety and Housekeeping, Maintenance and Upkeep of Service Literature. technique, and Testing of Common Rail Injectors.

Training on Distributor Pump (VE Mech. with Add-on) Training on EPS 815 Test Bench

Course Code: EP - 4 Course Code: EPS

Duration: 3 days Duration: 2 days

Place: BTC (Naganathapura, Bengaluru) Place: BTC (Naganathapura, Bengaluru)

Objective: To make participants competent in carrying out quality service on Diesel Fuel Objective: To enable participants to operate the EPS 815 Test Bench using the EPS 944 / 945 software.
Injection Equipment.
Participants: New staff, existing and potential EPS 815 users. Personnel who have good e
xperience in handling
Participants: Fuel Injection Equipment Service Personnel, preferably Bosch Authorised Representatives, all types of fuel injection pumps and governors.
Engineers / Technicians from OEMs. Course Content: Operation of Test Bench EPS 815 with KMA measuring technique. Programming of test protocol
adjustment steps, Importing / Exporting data, In-line and Distributor Pump test equipment fitment,
Course Content: Working Principles, Repair, and Testing of VE Distributor-type Fuel Injection Pump with
Basic Pump adjustment, Vehicle Diagnosis (Diesel Vehicles).
and without Manifold Pressure Compensator (LDA), Add-on Modules, Injectors, Filters,
Injection Timing Setting on Diesel Engine fitted with VE Pump, Safety and Housekeeping,
Maintenance and Upkeep of Service Literature.
Training on CB 18 & CB 28 Systems on EPS 620 / 625

Course Code: CR - 3
Training on Common Rail System (CP1 Pump & Injector)
Duration: 3 days
Course Code: CR - 1
Place: BTC (Naganathapura, Bengaluru)
Duration: 3 days Objective: To make participants competent in carrying out quality service on Common Rail High Pressure
Pump for CB18 & CB28 systems.
Place: BTC (Naganathapura, Bengaluru)
Participants: Technicians from BDS and OEMs equipped with EPS 620 / EPS 625 and having experience in
Objective: To make participants competent in carrying out quality service on Common Rail
handling all types of existing fuel injection systems.
High-Pressure Pumps and Injectors.
Course Content: Structure and Functions of High Pressure Pump (CB 18 and CB 28), Characteristics of, and Testing
Participants: Technicians from BDS and OEMs equipped with EPS 815 and having e
xperience in handling all
on the Pump Test Bench EPS 620 / 625 with KMA Measuring Technique and Testing.
types of existing Fuel Injection Systems.

Course Content: Structure and Function of Common Rail High-Pressure Pumps and Injectors (CP1K, CP1H, &
CRI), Characteristics of, and Testing on the Pump Test Bench EPS 815 with KMA Measuring
Technique, and Testing of Common Rail Injectors.

12 13
 Courses on Diesel Fuel Injection Courses on Diesel Fuel Injection
Training on CR Injectors – Repair & Testing Training on Diesel Fuel Injection (PF Pump)
Joint Certification Centres (JCCs)
Course Code: PF

Course Code: CRI Duration: 1 day

Duration: 3 days Place: BTC / JCCs

Place: JCCs Objective: To make participants competent in carrying out quality service on Diesel Fuel
Injection Equipment.
Objective: To make participants competent in carrying out quality service on Common Rail Injectors
(CRI & CRIN). Participants: Fuel Injection Equipment Service Personnel, preferably Bosch Authorised R
epresentatives,
Engineers / Technicians from OEMs.
Participants: Technicians from BDS / BCS equipped with EPS 815 / EPS 200 and having experience in handling
ll types of existing Diesel Injectors. Course Content: Working Principles, Repair, and Testing of PF and PFR Fuel Injection Pumps, Injectors, Importance
of BDC dimensions and adjustment.
Course Content: Structure and Function of Common Rail Injectors (CRI & CRIN), Repair of CR Injectors using
specified Bosch Fixtures and Tools. Testing of Common Rail Injectors on Bosch Injector Tester
(Stage 3 repair).
Training on Axial Plunger Distributor Pump (VP 37)
Training on Diesel Fuel Injection (PE A Type)
Course Code: EDC

Duration: 2 days
Course Code: PE-A
Place: JCCs
Duration: 3 days
Objective: To make participants competent in carrying out quality service on Bosch VE Fuel I njection Pumps
Place: JCCs with Electronic Diesel Control (VP-37).
Objective: To make participants competent in carrying out quality service on Diesel Fuel Injection Participants: Fuel Injection Equipment Service Personnel from Bosch Authorised R
epresentatives, Engineers
Equipment (PE Pumps).
Technicians from OEMs, equipped with EPS 611 / 620 + EDC Tools.
Participants: Fuel Injection Equipment Service Personnel from Bosch Authorised Workshops and
Course Content: Basics of EDC System, Working Principles, Repair, Testing, and Adjustment of Bosch Distributor-
independent workshops handling Bosch Fuel Injection Equipment.
type Fuel Injection Pump (VP-37) and Injectors.
Course Content: Working Principles, Repair, and Testing of PE Multi-cylinder Pumps fitted with RSV and
RQV Governors, Injection Timer, Feed Pump and Filters, MPC unit and all other
Add-on Modules, Removal and Fitment of FIE on the Vehicle, and Setting of F uel Injection Timing.
Training on Injection Timing Setting on Diesel Engine

Advanced Course on Distributor Pump (VE Mech. Pump with Add-ons) Course Code: VS

Duration: 1 day
Course Code: VE - 2
Place: JCCs
Duration: 2 days
Objective: To make participants understand the importance of Injection Timing and c ompetent in setting
Place: JCCs Injection Timing on Diesel Vehicles fitted with PE A and VE-Type Fuel Injection Pumps.
Objective: To make participants competent in carrying out quality service on Diesel Fuel Injection Participants: Fuel Injection Equipment Service Personnel from Bosch Authorised R
epresentatives, Engineers
Equipment (VE Pumps with Add-on Modules). Technicians from OEMs and Diesel Mechanics.
Participants: Fuel Injection Equipment Service Personnel from Bosch Authorised W
orkshops and independent Course Content: Basic knowledge on FIE products, Setting Injection Timing on Diesel Vehicles fitted with PE A
workshops handling Bosch Fuel Injection Equipment. and VE-Type Fuel Injection Pumps, General Maintenance Tips, and Warranty Terms.
Course Content: Working Principles, Repair, and Testing of VE Pumps fitted with Mechanical Governors, Diesel
Filter Removal & Fitment on Vehicle and Fuel Injection Equipment Removal & Fitment on Vehicle
along with Setting of FIP timing on Engine.

14 15
 Courses on Diesel Fuel Injection Courses on Diesel Fuel Injection
Training on Diesel Fuel Injection Comprehensive Course on VE-Type FIP with Add-on Modules

Course Code: PE - 1 Course Code: VE – A

Duration: 2 days Duration: 3 days

Place: JCCs Place: JCCs

Objective: To make participants who work on the Heavy Duty Test Bench competent to c
arry out quality Objective: To make participants competent in carrying out quality service on VE Distributor-type
service on Fuel Injection Equipment. Fuel Injection Pump fitted with Add-on Modules.

Participants: Fuel Injection Equipment Service Personnel from Bosch Authorised R

epresentatives, equipped Participants: Technicians from BDS / ODP.
with Heavy-Duty Test Bench EPS 611 / 620 / 625.
Course Content: Working Principles, Repair, and Testing of VE Distributor-type Fuel Injection Pump fitted with
Course Content: Complete Course on Inline FIP with RSV Governor. Working Principles of Pump and Governor. Add- on Modules LDA, LFB, KSB, KKSB, LFG, FBB, EGR-Microswitch, and Potentiometer, Injectors,
Repair and Testing of FIP with RSV / RQV - K Governors & Injectors. Additional Training on MPC Setting. Preventive Maintenance, Troubleshooting, Field Failure Analysis and their root cause.

Course on CR Injector Repair & Testing (Stage 1, 2, & 3) Basic Training Programme on Bosch Common Rail System

Course Code: CRI – A Course Code: CR – B

Duration: 5 days Duration: 1 day

Place: JCCs, Delhi, Kolkata, Pune and On-spot Place: JCCs

Objective: To make participants competent in carrying out complete repair & service of Objective: To make participants understand the basic concept & working principles of Common Rail System,
Common Rail Injectors. Structure and Function of each individual component, Range of Common R ail Fuel Injection
systems, Advantages, Preventive Maintenance, Do's & Don’ts.
Participants: Technicians / Foremen from BDS / BCS equipped with EPS 815, EPS 200, EPS 205, and having
experience in Repair & Service of existing Diesel Injectors. Participants: Managers / Engineers / Foremen from Bosch Authorised Dealers, Bosch Car S
ervice Dealers
& ODP.
Course Content: Overview of range of Common Rail Systems, Working Principles of various types of Common Rail
Injectors (CRI & CRIN), Structure and Repair of CR injectors using specified Bosch equipment & Course Content: Working Principles, Design, and Function of different Bosch Common Rail Systems, Structure and
tools, Measurement of Armature shim & Air Gap shim, Testing of Common Rail Injectors on Function of each individual component, Range of Common Rail Fuel Injection Systems, Advantages,
EPS 815, EPS 200, EPS 205. Preventive Maintenance, Do's & Don’ts.

Comprehensive Training Programme on Bosch Common Rail System

Course on Repair / Testing of PE A Pump with RSV Governor
Course Code: CR – A

Course Code: RSV Duration: 3 days

Duration: 2 days Place: JCCs

Place: JCCs Objective: Training on the functions of Diesel Engine Management and Diagnosis of CRS, Working P
rinciples
of Common Rail System, Structure & Function of each component, range of Common Rail Fuel
Objective: To make participants competent in carrying out quality service of PE A Inline Fuel Injection Systems, Advantages, Preventive Maintenance, Do's & Don’ts.
Injection Pump fitted with RSV Governor.
Participants: Managers / Engineers / Foremen from Bosch Authorised Dealers, Bosch C
ar Service Dealers,
Participants: Technicians from BDS / ODP. ODP, OEM, and Engineering students.

Course Content: Working Principles, Repair, and Testing of PE A Type Multi-cylinder pump with RSV Governor, Course Content: Working Principles, Design, and Function of different Bosch Common Rail Systems, Structure and
Add-on Modules fitted in PE Pump, Injectors, Preventive Maintenance & Troubleshooting. Function of each individual component, Function of various Sensors, Actuators, & ECU, Live
Diagnosis on the Vehicle, Advantages, Preventive Maintenance, Do's & Don’ts.

16 17
 Courses on Diesel Fuel Injection
Training on Calibration of Newly Released PE Pump with RSV Governor

Course Code: PE – C

Duration: 2 days

Place: JCC – Chennai

Objective: To make participants understand Calibration procedure of PE A Type Pump with RSV Governor.

Participants: Technicians from BDS and ODP.

Course Content: Calibration Procedure, Steps and Importance of various settings, Consequences of
improper settings.

New
Training on Common Rail System Diagnostics for Diesel
(Advanced Module)

Course Code: CRSD – D

Duration: 2 days

Place: BTC Nhp / Delhi

Objective: Understand the functions of ECU, Self-Diagnostics of CRS, Specific Detection of Faults in
Diesel Vehicles.

Participants: Motor Mechanics / Motor Electricians / Master Mechanics with experience in the field of Diesel
Systems and Vehicle Diagnostics.

Course Content: Design and Function of various Bosch Common Rail generations; Sequence and operating
modes of diagnostics software with Bosch Diagnostic Tester KTS / ES 300; Testing of back flow
using injector return flow measuring device.

New
Training on Diesel Vehicle Exhaust Gas Treatment
Course Code:
Courses on Workshop and
Test Equipment
EGT-D

Duration: 2 days

Place: BTC Nhp

Objective: To make participants understand the function of EGT management, and diagnostics of the
EGT system.

Participants: Master mechanics with experience in the field of diesel systems and vehicle diagnostics.

Course Content: Working principles, design and function of EGT. Layout and function of each individual Diagnostic Software

component, Do's and Don't's, Troubleshooting.

ESI[tronic] 2.0
2018/3

Truck
OHW 1
OHW 2

Windows® 7 SP1 (32/64 bit)

Windows® 8 (32/64 bit)
Windows® 10 (32/64 bit)

FD 2018-01, V 11.0.2493
1 987 729 601 - 1 987 P10 546 999

© 2018 Robert Bosch GmbH, All rights reserved

www.bosch-workshop-world.com
Made in Germany

18 19
 Courses on Workshop and Test Equipment
Basic Course on ESI[tronic] & MSI
Courses on Basic Products &
Course Code: BWSS
Process Knowledge
Duration: 2 days

Place: JCCs

Objective: To enable participants to become competent in using ESI[tronic] and MSI.

Participants: Bosch Car Service / Bosch Authorised Workshop Personnel nominated to h

andle ESI / MSI.

Course Content: Practical Demonstration of ESI / MSI and Practice by Participants, Workshop Reports,
Manufacturing Codes, and Warranty Terms and Procedures.

20 21
 Courses on Basic Products & Courses on Basic Products &
Process Knowledge Process Knowledge
Bosch Training Centre (BTC)
Training on Gasoline Fuel Injection System
Product Knowledge Induction Course for New Joinees
Course Code: GFI - 2

Course Code: AAN Duration: 2 days

Duration: 5 days Place: BTC (Naganathapura, Bengaluru)

Place: BTC (Naganathapura, Bengaluru) Objective: To educate participants about new technologies and products in Petrol Injection.

Objective: Product Knowledge on all Automotive Aftermarket products. Participants: Bosch Territory Managers – Sales and Service, Bosch Authorised Distributors’ Field
Representatives, Bosch Authorised Product Stockists, and BCS (by invitation).
Participants: All newly joined Automotive Aftermarket employees.
Course Content: Technology and Product Knowledge on Petrol Injection. Working of Petrol Engine, Carburation
Course Content: Overview and understanding of Diesel Fuel Injection Systems, Gasoline Systems, Process, Single-Point Fuel Injection, Multipoint Fuel Injection, and Vehicle Diagnosis – Hardware
Diagnostic Equipment, and Automotive Accessories of Bosch.
and Software.

Training on PS / SG / AS / BAT / LUB / Filters Training on Starters & Alternators

Course Code: AAN - 2
Auto Electrical
Duration: 4 days
Course Code: AEL - 2
Place: BTC (Naganathapura, Bengaluru)

Objective: Product Knowledge on all Automotive Aftermarket products. Duration: 3 days

Participants: All newly joined Automotive Aftermarket employees. Place: BTC (Naganathapura, Bengaluru)

Course Content: AA-IN New Joinee Training Programme on PS / SG / AS / BAT / LUB / Filters and others with Objective: To make participants competent in carrying out quality service on Bosch Auto Electrical
Plant visit & visit to Company-run BCS Products and Test Equipment.

Participants: Personnel handling Auto Electrical Equipment at Bosch Authorised Stockists / Distributors /
Product Knowledge Induction Course for Bosch Employees Workshops.

Course Content: Working Principles, Repair, and Testing of Bosch Auto Electrical Products, Respective Test
Course Code: RB – IND Equipment and New Types of Starters & Alternators.

Duration: 3 days
Basic Course on Gasoline Fuel Injection System
Place: BTC (Naganathapura, Bengaluru)

Objective: To help participants understand the role of Systems in Automobiles. Joint Certification Centres (JCCs)
Participants: Personnel employed at Bosch Group companies.
Course Code: GFI - 1
Course Content: Overview and understanding of various Vehicle Systems with focus on Bosch
Automotive products. Duration: 1 day

Place: JCCs
Training on Car Maintenance & Systems Objective: To educate participants about new technologies in Gasoline Systems.

Course Code: VMS Participants: Bosch Territory Managers – Sales and Service, Bosch Authorised Distributors’
Field Representatives, Bosch Authorised Product Stockists, BCS, etc. (by invitation).
Duration: 5 days
Course Content: Working Principles of Gasoline Engines, Multipoint Fuel Injection Systems, and
Place: BTC (Naganathapura, Bengaluru) Vehicle Diagnostics.

Objective: To make participants competent in carrying out quality service on Bosch Products fi
tted in vehicles.

Participants: Personnel at BCS / Bosch Authorised Stockists / Distributors / Workshops offering Vehicle Service.

Course Content: Practicals on Removal and Fitment of Bosch Products on Vehicles, using Test Equipment for
Diagnosis and General Service and Maintenance Aspects.
22 23
 Courses on Basic Products & Courses on Basic Products &
Process Knowledge Process Knowledge
Bosch System Technicians Programme
Training for Proprietors on New Developments
Course Code: BST
Course Code: PMW
Duration: 2 to 5 days (depending on the module)
Duration: 1 day
Place: BTC (Naganathapura, Bengaluru), JCCs
Place: JCCs
Objective: To make the participants knowledgeable about Bosch Products, Equipment, and V
ehicle Systems
as per the detailed course plan for System Technicians. Objective: To provide knowledge on latest products, Test and Diagnostic Equipment.

Participants: All newly joined Automotive Aftermarket employees. Participants: Proprietors of Bosch Authorised Workshops.

Course Content: Working Principles, Repair, and Testing of Bosch Products and Respective Test Equipment, Course Content: Information on Latest Products, their Features, Advantages, and Benefits. Test and Diagnostic
Knowledge on Vehicles, New Technologies, and Diagnostic Tools / Equipment. Equipment required for the Workshop.

Training on Bosch Battery Basic Knowledge Course for Customer Relations Officers
Course Code: BB
Course Code: CRO
Duration: 1 day
Duration: 1 day
Place: JCCs
Place: JCCs
Objective: To make participants competent in selling Bosch Batteries effectively and h
andling warranty.
Objective: To provide basic knowledge on all Bosch Products, Test & Diagnostic Equipment,
Participants: Bosch Authorised Distributors, Stockists, Dealers, and Workshop Personnel Handling, Storage, and Shelf Life.
handling battery sales.
Participants: Customer Relations Officers at Sales Offices, Personnel employed with C&F Agents.
Course Content: Construction and Working Principles, Features, Advantages and Benefits, Product Range,
Course Content: Information on all Bosch Products, their Applications and Usage, Test and Diagnostic
Charging, Testing, Using BAT 121, Competitors’ Information, Opportunity Areas, Sales
Equipment used by customers.
Arguments, Effective Campaigning, and Warranty Handling.

Basic Course for Fleet Operators

Course Code: FO

Duration: 1 day

Place: JCCs

Objective: To provide knowledge on Bosch Products.

Participants: Proprietors, Partners, and Technicians from Fleet Operators.

Course Content: Basic knowledge on Bosch Products, Maintenance Aspects, their Qualities, Features,
and Warranty Terms.

24 25
 Courses on Basic Products & Process Knowledge
Training on Energy Systems (Starters & Alternators)

Course Code: AEL - 1

Duration: 2 days

Place: JCCs

Objective: To make participants competent in carrying out quality service on Bosch Auto Electrical Products.

Participants: Auto Electricians working in Bosch Authorised Workshops.

Course Content: Working Principles, Repair, and Testing of Bosch Auto Electrical Products, respective Test
Equipment and New Types of Starters and Alternators. Removal and Fitment of Alternators / Starter
Motors on Vehicles.

Auto Electrical Course for Independent Electricians

Course Code: IE

Duration: 1 day

Place: JCCs

Objective: To provide knowledge on Bosch Products.

Participants: Electricians having their own garages.

Course Content: Basic knowledge on Bosch Auto Electrical Products, Maintenance Aspects, their Qualities,
Features, and Warranty Terms.

Training on New Generation Products (C6X, NBL) for New

Auto Electricals with Vehicle Testing

Course Code: AEL - 3

Duration: 1 day

Place: BTC / JCCs

Objective: To make participants competent in handling new generation products (C6X, NBL) for auto
electricals with vehicle testing

Courses for Bosch Car Service

Participants: Personnel handling auto electrical products at workshops.

Course Content: Working principle, Repair and Testing of New-generation Auto electrical products, Testing on Vehicle.

Personnel

26 27
 Courses for Bosch Car Service Personnel Courses for Bosch Car Service Personnel
Bosch Training Centre / Joint Certification Centres (BTC / JCCs) Advanced Course on Cars for BCS Personnel

Advanced Course on Cars for BCS Personnel Course Code: EPSV (Electronic Power Steering) – Advanced Module

Duration: 2 days
Course Code: BCS-2 - Advanced Module
Place: BTC (Naganathapura, Bengaluru), JCCs
Duration: 5 days
Objective: Independent execution of Diagnostics / Repair and Maintenance work in Electronic
Place: BTC (Naganathapura, Bengaluru) Power Steering.

Objective: To make Bosch Car Service Personnel competent in handling Business, Customer Participants: Vehicle Mechanics / Electricians / Automotive Engineers / Master Mechanics with good
Service, and Technical Issues. knowledge of application of ESI[tronic] & Bosch testing device KTS.

Participants: Bosch Car Service Works In-charge. Course Content: Basic knowledge on Mechanical Steering System, Basic knowledge on Steering Geometry /
Limitation in Mechanical Steering System, Inspection of Mechanical Components, Overview of
Course Content: Industry, Service Marketing, Customer Service, Introduction to Petrol & Diesel Injection Systems, EPS and Components, Different EPS Modules, Self-diagnosis on Vehicle, Testing of the
Components using KTS.
Different Generations, Diagnosis & Troubleshooting using KTS, Practical Demonstration on
the Vehicle.
Training on Common Rail System Diagnosis in Cars
Training on Vehicle Electrical & Electronic Systems
Course Code: CRSD – Advanced Module
Course Code: EEM - 1 (Electricals / Electronics – Module 1) – Basic Module
Duration: 2 days
Duration: 3 days Place: BTC (Naganathapura, Bengaluru) and JCCs
Place: BTC (Naganathapura, Bengaluru), JCCs Objective: Understanding the functions of ECU Self-diagnostics of CRS-specific detection of f aults in Bosch
Passenger Car Common Rail Systems.
Objective: Refreshing the basics of Vehicle Electrical Systems & Vehicle Electronic Systems. Test
possibilities of different systems in the vehicle. Participants: Motor Mechanics / Motor Electricians / Automobile Engineers / Master Mechanics w
ith practical
experience in the field of Automotive Diesel System and Vehicle Diagnostics.
Participants: Vehicle Mechanics / Electricians and Automotive Engineers with limited k
nowledge in the field of
Vehicle Electric System / Electronic System. Course Content: Design and functions of different Bosch Common Rail Generations. Sequence and operating modes
of diagnosis software as well as individual test functions with Bosch Diagnostic Tester KTS,
Course Content: Ohm’s law as well as Electro-Technical basics, Design and Mode of Operation of Electrical Systems, Diagnostic strategies and specific detection of faults as well as fault rectification, Testing of
Measurement of Electrical Systems with Different Measurement Devices such as Multimeter, Low-pressure / High-pressure circuit using Bosch Diesel sets 1 & 3. Testing of back flow using
Ammeter, Voltmeter, as well as Engine Tester, Understanding Simple Electronic Circuits, Components, Injector Return-flow measuring device.
Practical Implementation of Theoretical Knowledge by Measurement Exercises directly on the Vehicle,
Understanding and Troubleshooting of the Wiring System on the Vehicle.
Training on Mechanical Braking Systems, Components, and Testing
Understanding the Vehicle Network Systems Course Code: BRM (Mechanical Braking) – Basic Module

Course Code: CAN (Automotive Networking) – Expert Module Duration: 2 days

Place: BTC (Naganathapura, Bengaluru), JCCs

Duration: 1 day
Objective: Understanding the basic mechanical braking system, components, inspecting, and testing.
Place: BTC (Naganathapura, Bengaluru), JCCs
Participants: Basic training for Motor Mechanics / Automobile Engineers.
Objective: Understanding the set-up and functions of the Networked Systems in the Vehicle and their
testing possibilities. Course Content: Fundamentals of Braking System, Different types of Braking Systems (mechanical, hydraulic, air),
Participants: Motor Mechanics with knowledge of Vehicle's Electric / Electronic System, A
utomotive Engineers, Different Braking System Circuits, Familiarisation of Braking System components and their
and Vehicle Electricians. functions, Inspection and Testing of the main components of the Braking System, Removal &
replacement method for Brake Pads, Cylinders, etc., Measurements: Wheel Hub, Brake Disc,
Course Content: Principles and Set-up of CAN database, Design and Differences of various Bus Systems, CAN Wear Test, Pressure Test, Classification of Brake Fluids and its importance, Brake Bleeding and
Protocol Set-up, Network – Topology, Do's & Don'ts of CAN system, Display measurement Brake Pedal Setting, Troubleshooting Instructions.
possibilities using KTS.

28 29
 Courses for Bosch Car Service Personnel Courses for Bosch Car Service Personnel
Training on Electronic Braking Systems, Components, and Testing Basic Course on Cars for BCS Personnel

Course Code: BRE (Electronic Braking System) – Advanced Module Joint Certification Centre (JCC)
Duration: 2 days
Course Code: BCS-1 – Basic Module
Place: BTC (Naganathapura, Bengaluru)
Duration: 2 days
Objective: Understanding the Anti-lock Braking System, Components, Inspection, Troubleshooting,
and Testing. Place: JCCs

Participants: Basic training for Motor Mechanics / Automobile Engineers. Objective: To enable operating-level Bosch Car Service Personnel understand the concept and m
ake them
competent in Vehicle Diagnosis.
Course Content: Limitations of Mechanical Braking System, Introduction and Advantages of ABS, Understanding
Braking Force, Coefficient of Friction, Understanding the Braking Force in different road Participants: Bosch Car Service Technicians.
conditions, Location and Function of ABS Components, Understanding of different types of
Wheel Speed Sensors, Function of Bosch ABS Systems: ABS 2S, ABS 2E, ABS 5.0, ABS 8.0 in the Course Content: Engine Tuning and Performance Testing, Clutch Introduction and Maintenance, Steering and
areas of Hydraulics and Electricals, Understanding the Wiring Diagram of ABS; ABS Self-diagnosis Wheel Alignment, Braking System, Suspension System, Battery Starter and Alternator
& SIS on a car using KTS, Guided Troubleshooting, ABS Bleeding, Repair, & Safety Instructions, Maintenance, Applications of KTS.
Introduction to TCS / ESP.

Training on Vehicle Diagnostics – Expert Module

Training on Vehicle Electrical Safety Systems
Course Code: BCCE (Body Comfort & Convenience Electronics) – Expert Module
Course Code: VEL
Duration: 2 days
Duration: 2 days
Place: JCCs
Place: BTC (Naganathapura, Bengaluru)
Objective: Giving participants expert-level training in various functions of Diagnostics for Vehicle
Objective: To make participants competent in carrying out quality service on Vehicle Electricals & Body Comfort and Convenience Electronics.
Electronic Systems.
Participants: Vehicle Mechanics / Electricians / Motor Mechatronic Engineers, Automotive E
ngineers / Master
Participants: Personnel handling Electrical work at Bosch Authorised Service Centres.
Mechanics with good knowledge for application of ESI[tronic] & Bosch KTS Testing Devices.
Course Content: Working Principles, Repair, and Testing of Electronic Fuel Injection, Electronic Ignition System,
Course Content: Installation and functioning of Air Conditioner and components, Components of hydraulic circuits
Active Safety, Passive Safety, Central Electronic, and Body Comforts System.
for throttle and expansion valve, Assembly and function of Air Condition control, Components of
Air Conditioner controls such as switch, sensor, actuator motor, & control unit, Testing of
systems in the vehicle with the help of ESI[tronic] and CAS / CAS (plus) KTS 550 / 570,
In-depth Course on Vehicle Systems for Master Technicians – Developing diagnostic strategies and detection of diagnostic possibilities primarily in the
complete system of the vehicle; Practical operation in vehicles which are equipped with the
Expert Module above-mentioned systems.

Course Code: BST – CAR

Training on Vehicle Electric Systems – Expert Module
Duration: 2 to 5 days (depending on the module)

Place: BTC (Naganathapura, Bengaluru), JCCs Course Code: MTS & A (Measurement, Testing of Sensors & Actuators) – Advanced Module

Objective: To make participants 'Master Technicians' on Vehicle Systems as per the detailed course plan. Duration: 2 days

Participants: System Technician Trainees working with Bosch Authorised Car Workshops ( By invitation). Place: JCCs

Course Content: Working Principles, Repair, and Testing of Automotive Systems, Diagnosis using Bosch ESI 2.0 Objective: Basic knowledge-base for specific diagnosis of faults in vehicles with main focus on safe a
nd effective
Software and Hardware KTS 570, Usage of Multimeter, Oscilloscope functionalities in fully handling of various systems in the vehicle.
utilising the Service, Information System & Computer-Aided System for all kinds of vehicles,
Referring to electrical wiring diagram to find out the root cause. Participants: Motor Mechanics / Motor Electricians / Motor Mechatronic Engineers /
Automotive Engineers.

Course Content: Summary of diagnosis with measuring devices such as: Multimeter, Engine tester KTS, Dealing
with electrical circuits, Sensors & Actuators in the following systems: MPFI System, Common
Rail System, Ignition (Distributor-type & Distributor-less – Electronic), Explanation and evaluation
of different output and input signals, Independent operation with ESI[tronic], KTS, Multimeter.

30 31
 Courses for Bosch Car Service Personnel Courses for Bosch Car Service Personnel
Course on KTS usage (with ESI[tronic]) Training for Bosch Car Service Franchise Personnel
Course Code: BCS - 3
Course Code: KTS XXX
Duration: 2 days
Duration: 2 days
Place: BTCs, JCCs, & LTCs
Place: JCCs
Objective: To make participants competent in handling vehicle service at respective workshops in different
Objective: To enable participants to understand the concept of vehicle diagnosis application / f eatures of KTS & to systems including Testing of components in Test Equipment.
become competent in the use of ESI[tronic].
Participants: Bosch Car Service Personnel / Bosch Workshop Personnel nominated to handle Vehicle Service.
Participants: Bosch Car Service / Bosch Authorised Workshop personnel nominated to handle
KTS & ESI[tronic]. Course Content: Vehicle Configuration and systems, Engine Basics, Engine systems, Basic Electrical and
Electronics, Vehicle maintenance, Transmission Types, Chassis, Suspension, Brakes, Bosch
Course Content: Practical Demonstration on usage of KTS & ESI on the vehicle, detailed explanation on each products, Replacement period, Bosch Test equipment.
chapter of ESI, and practice by the participants.

Training on Vehicle Systems and Processes New

Course on Automatic Transmission Systems
Course Code: BCS - 4
Course Code: ATS
Duration: 2 days
Duration: 2 days
Place: BTC Nhp / Delhi
Place: BTC
Objective: To educate the participants about the maintenance of 4 Wheelers.
Objective: To make participants competent in carrying out quality service on complete Automatic
Transmission Systems fitted in vehicles. Participants: Technicians, Mechanics, Master Technicians with car experience.

Participants: Personnel at Bosch Car Service, Workshops offering Vehicle Service and Transmission repairs. Course Content: Working of Gasoline Engines and Maintenance of the vehicle as per Standard Operating Procedure.

Course Content: Practicals on Dismantling and Assembling of Automatic Type Transmission System fitted in
Passenger Car Vehicles, Understanding the Power flow, Inspection of Transmission Components, Training on Communication Skills New
Checking of mechatronics of Automatic & Direct Shift Gearboxes, etc.

Course Code: COM

Course on Gasoline Direct Injection Systems Duration: 2 days

Place: BTC Nhp / Delhi

Course Code: GDI
Objective: To make participants learn the tricks and tips for effective customer handling.
Duration: 2 days
Participants: Front Desk personnel, Dealer Service Advisors / Supervisors.
Place: BTC
Course Content: Training Programme with Simulation of talking to customer, listening skills, time management,
Objective: To make participants understand Gasoline Direct Injection system Functioning, Troubleshooting, communication skills.
and Diagnosis

Participants: Bosch Car Service / Bosch Authorised Workshop personnel nominated to handle Service on vehicles. New
Certification Training on Premium Vehicles
Course Content: Components of GDI system for throttle and expansion, Construction of GDI system, Components
such as switch, sensor, actuator motor, & control unit, Testing of systems on the vehicle with the
help of ESI[tronic] and CAS / CAS (plus) KTS 550 / 570, Developing diagnostic strategies and Course Code: MERC
detection of diagnostic possibilities primarily in the complete system of the vehicle, Practical
operation in vehicles which are equipped with the above-mentioned systems. Duration: 11 days + 1 day Assessment

Place: BTC Nhp

Objective: To educate the participants about vehicle systems of premium cars.

Participants: Technicians, Mechanics, Master Technicians, Owners with car experience.

Course Content: Vehicle Networking, Air System, Fuel System, Thermal Management, Energy Management
for Mercedes.

32 33
 Courses for Express Bike Service Personnel
Basic Training on 2-Wheeler – Servicing

Course Code: EBS

Duration: 2 days

Place: BTC (Naganathapura, Bengaluru) / JCCs

Objective: To educate participants about Maintenance of 2-Wheelers, Bosch Test Equipment

for 2-Wheelers, Bosch product knowledge, and Warranty terms and conditions.

Participants: Bosch Territory Managers – Sales and Service, Bosch Authorised Distributors' Field
Representatives, Bosch Authorised Product Stockists, EBS Dealers.

Course Content: Working of Gasoline Engines and Maintenance of the Vehicle.

Advanced Training on 2-Wheeler – Engine Repair & Inspection

Course Code: EBS – I

Duration: 2 days

Place: BTC (Naganathapura, Bengaluru) / JCCs

Objective: To educate participants about repair and inspection of a 2-Wheeler Engine.

Participants: EBS Dealers, Neutral Garages, Institute Students, College Students.

Course Content: Dismantling and Assembly Procedure of a 2-Wheeler Engine. Diagnosis, Repair,
and Inspection of a 2-Wheeler.

Course on Advanced Technologies for 2-Wheelers

Course Code: EBS - 2

Duration: 2 days

Place: BTC (Naganathapura, Bengaluru) / JCCs

Objective: To make participants competent in carrying out quality service on advanced systems like ABS and Fuel
injection system of 2-Wheelers for different models.

Participants: Personnel at Express Bike Service, Workshops offering Bike Service and Repairs.

Courses for Express Bike Service Course Content: Theoretical working with practical demonstration on 2-W fault diagnosis on 2-Wheeler Fuel

Personnel
Injection System and Anti-lock Braking System, along with various component checks and
dismantling & assembly on the vehicle.

34 35
 Courses for Area Managers
Bosch Training Centres (BTCs) / Joint Certification Centres (JCCs), Seminars – Techno-commercial

Course for Area Managers – Sales

Course Code: AM

Duration: 5 days

Place: BTC (Naganathapura, Bengaluru)

Objective: To make participants competent in handling sales activities pertaining to Bosch Products.

Participants: Bosch Area Managers – Sales (by invitation).

Course Content: Product-specific contents (will be mentioned in the invitation).

Training for Bosch Authorised Workshop Foremen (All Automotive Products)

Course Code: BWF

Duration: 1 day

Place: JCCs

Objective: To make Bosch Authorised Workshop Foremen competent in carrying out quality s
ervice on
Bosch FIE and AE Products, thus ensuring customer satisfaction.

Participants: Foremen working in Bosch Authorised Workshops.

Course Content: Advanced knowledge on all Bosch Products, FIE, AE, and Automotive Accessories, Warranty
Administration, Attending to Customers, Safety and Housekeeping, Troubleshooting of
Vehicles, Effective Field Campaigning, and Tips on Developing the Service Business.

Basic Knowledge Course for Counter Salesmen

Course Code: CSM

Duration: 1–2 days

Place: JCCs

Objective: To make Bosch Authorised Workshop Counter Salesmen competent in attending to customers
profitably and ensuring customer satisfaction.

Courses for Area Managers – Sales, Participants:

Course Content:
Counter Salesmen working in Bosch Authorised Workshops.

Basic knowledge on Bosch Products, FIE, AE, and Automotive Accessories, Warranty
& Area Managers – Workshop
Administration, Attending to Customers, Effective Field Campaigning, and Tips on Developing
the Service Business.

Business Development

36 37
 Courses for Area Managers Courses for Area Managers
Basic Course for Field Representatives of Bosch Network Detailed Course on Bosch Warranty System
Course Code: PFR - 4W
Course Code: WTY - 2
Duration: 1–2 days
Duration: 2 days
Place: JCCs
Place: JCCs
Objective: To make participants competent in handling Bosch Products and related market issues.
Objective: To make participants competent in handling warranty of Bosch products range e ffectively at
Participants: Field Representatives working with Bosch Authorised Network. Bosch Authorised Dealer Points, Filling Warranty Job Cards & punching the Warranty Jobs in
BWS online.
Course Content: Basic knowledge on Bosch Products, FIE, AE, and Automotive Accessories, their Qualities,
Features, Customer Service Issues, and Warranty Administration. Participants: Personnel from Bosch Authorised Workshops / Distributors who handle Warranty complaints & are
responsible for filling the Warranty Job Card & punching / monitoring warranty data in BWS
online system.

Basic Knowledge Course for Bosch 2-Wheeler Distributors Course Content: Bosch Warranty Policy in detail, Warranty Terms, Manufacturing Code, Procedures, new hints
for filling the Warranty Claims, appropriate Defect Code for the critical defects, new information
Course Code: PFR – 2W related to BWS online, BWS online (live) to demonstrate Claim Filling, Service / Technical Information
released in connection with the Warranty & BWS online, current Field Issues, Warranty decision on
Duration: 1 day
critical field failures in FI & AE, Planning / Ordering as per the new releases & market potential.
Place: JCCs

Objective: To make participants competent in handling the Bosch 2-Wheeler Product Range and
related issues in the market.

Participants: Bosch Authorised 2-Wheeler Distributors, Proprietors / Partners.

Course Content: Basic knowledge on the Bosch 2-Wheeler Product Range, Qualities, Features, Customer
Service Issues, and Warranty Administration.

Advanced Knowledge Course on Warranty

Course Code: WTY

Duration: 1 day

Place: JCCs

Objective: To make participants competent in handling Warranty Issues.

Participants: Bosch Authorised Workshops, Bosch Authorised Distributors’ Field R

epresentatives, Bosch
Authorised Product Stockists, BCS, etc.

Course Content: Manufacturing Codes, Warranty Terms and Procedures.

38 39
 Courses for Area Managers

Product Training - SALES New

Course Code: AA-SAI-1

Duration: 2 days

Place: JCCs

Objective: To make participants competent to Handle Sales of different products in Bosch Portfolio.

Participants: Area Managers/Sales Representatives.

Course Content: Basics of Diesel Engine (Conventional+Commom Rail system), Battery, Brakes, Filters.

Sales Excellence Training New

Course Code: AA-SAI-2

Duration: 2 days

Place: JCCs

Objective: Understanding fundamental Organizational Support and Structures, Market & Customer Analysis,
Customer Requirement Management, Customer Offer Management, Local Solutions.

Participants: Area Managers / Sales Representatives.

Course Content: Understand Bosch AA challenges of the future, the AA strategy and success factors (parts,
diagnostics & workshop services),Know-how to understand the market and customers,
Understand how to gather customer requirements, identify customer needs and to
match brand and value / Bosch strengths and strategies to achieve sales excellence.

Courses for Institutional Customers

& STUs (State Transport Unions)

40 41
 Courses for Institutional Customers & Courses for Institutional Customers &
STUs (State Transport Unions) STUs (State Transport Unions)
Basic Course for State Transport Undertakings (FIE, AE, & Auto Accessories)
For Railways – Training on PF Pump – WV-Type & Injector
Course Code: STU - 1
Course Code: RLY
Duration: 2 days
Duration: 2 days
Place: BTC/ JCCs / On the spot
Place: BTC (Naganathapura, Bengaluru) / JCCs / On the Spot
Objective: To provide knowledge on Bosch Products.
Objective: To make participants competent in carrying out quality service on Fuel Injection Equipment.
Participants: Technicians working with State Transport Undertakings and other Government Departments.
Participants: Fuel Injection Equipment Service Personnel of Railways.
Course Content: Basic knowledge of Bosch Products, Maintenance Aspects, their Qualities, Features,
and Warranty Terms, Trade Goods (Bulbs, High Pressure Pipes, Filters, etc.) Course Content: Working Principles, Repair, and Testing of PF-Type Fuel Injection Pumps and Injectors used by
Indian Railways, Safety and Housekeeping, Maintenance and Upkeep of Service Literature.

Advanced Course for State Transport Undertakings

Diesel System Course for Defence Personnel
(FIE, AE, & Auto Accessories)
Course Code: DEF - 2
Course Code: STU - 2
Duration: 3 days
Duration: 2 days Place: BTC (Naganathapura, Bengaluru) / JCCs / On the Spot
Place: BTC/ JCCs / On the spot Objective: To make participants competent in carrying out quality service on Diesel Fuel Injection Equipment.
Objective: To make participants competent in carrying out quality service on Diesel Fuel Injection Participants: Fuel Injection Equipment Service Personnel from Defence organisations having a minimum of two
Equipment, Auto Electrical, and other Bosch Products. years of on-the-job experience.
Participants: Nominated Personnel from State Transport Undertakings. Course Content: Working Principles, Repair, and Testing of PE A, Multi-cylinder Fuel Injection Pump with RSV and
Course Content: Working Principles, Repair, and Testing of PE Multi-cylinder Pumps, VE, VE (EDC), Common Rail, RQV Governors, Manifold Pressure Compensator fitted on PE Pumps, Injection Timing Lock on
Alternators, Starter Motors, and other Bosch Automotive Accessories. PE Pumps, Injectors, Injection Timers, Filters and Feed Pump, Injection Timing Setting on Diesel
Engine, Working Principles, Repair, and Testing of Distributor-type, Fuel Injection Pump-type – VE
with and without Manifold Pressure Compensator (LDA), Add-on Modules, Injection Timing
Diesel System Course for Defence Personnel Setting on Diesel Engine fitted with VE Pump, Safety and Housekeeping, Maintenance and
Upkeep of Service Literature.

Course Code: DEF - 1

Duration: 2 days

Place: JCCs / On the spot

Objective: To make participants competent in carrying out quality service on Diesel Fuel Injection
Equipment, Auto Electrical, and other Bosch Products.

Participants: Nominated Personnel from Defence Organisations.

Course Content: Working Principles, Repair, and Testing of PE Multi-cylinder Pumps, Alternators, Starter Motors,
and other Bosch Automotive Accessories.

42 43
 Courses for OE and OECDs
Seminar for OE Customers on New Developments (Diesel / Energy Systems)

Courses for OE and OECDs Course Code: OES

Duration: 3 days

Place: BTC (Naganathapura, Bengaluru) / JCCs / Online / On-Spot

Objective: To provide knowledge on Bosch Products and to inform participants about the latest
developments in Bosch Products.

Participants: Managers / Engineers of OEMs manufacturing Diesel Engines and Vehicles.

Course Content: Design, Working Principles, and Test Procedures of Bosch Fuel Injection and Auto Electrical
Equipment, Interaction with Bosch R&D, Quality, and Service Departments.

Basic Course for OE Customer Dealer

Course Code: OECD

Duration: 1 day

Place: JCCs

Objective: To provide knowledge on Bosch Products and Marketing Policies.

Participants: Works Managers and Technicians working with OECDs.

Course Content: Basic knowledge of Bosch Products, FIE, AE, and Automotive Accessories, their Qualities,
Features, Schemes, and Warranty Terms.

Basic Course for OE Customers on New Developments

(Diesel / Energy Systems)

Course Code: OEM

Duration: 2 days

Place: JCCs

Objective: To provide knowledge on Bosch Products (FIE and AE) and to apprise participants of the
latest developments in Bosch Products.

Participants: Managers / Engineers of OEMs manufacturing Diesel Engines and Vehicles.

Course Content: Design, Working Principles, and Test Procedure of Bosch Products (FIE and AE), and latest developments.

Course on General / Quick Service (For Customer Segment – Shell / Castrol)

Course Code: QS (4W & 2W) - Quick Service

Duration: 3 days

Place: BTC/ JCCs / On the spot

Objective: To make participants competent in handling General / Quick Service of Passenger Cars
and 2-Wheelers in Fuel-filling Stations as value-add.

Participants: Shell / Castrol Fuel Station Operators.

Course Content: General / Quick Service for Fuel Station Operators. (For Customer Segment - Shell / Castrol)
44 45
 Courses for Educational Institutions
Bosch Training Centre / Joint Certification Centres (BTC / JCCs)

Courses for Educational Institutions Train-the-Trainer Course on Diesel, Gasoline, & Vehicle Diagnosis

Course Code: TTT

Duration: 5 days

Place: BTC (Naganathapura, Bengaluru) / JCCs

Objective: The Train-the-Trainer Programme enables participants to stay abreast of the latest technologies.

Participants: Trainers at educational institutes, OE customers, and other institutional c

ustomers, Regional /
Local Trainers (by special invitation).

Course Content: New technologies in Diesel, Gasoline, Vehicle Diagnosis – Hardware and Software, Latest
Products launched, and Service & Training Concepts.

Training for Students on Diesel & Gasoline Systems

Course Code: NEI - 2

Duration: 3 days

Place: BTC (Naganathapura, Bengaluru), JCCs

Objective: To educate participants about new automotive technologies.

Participants: Final Year Students from Technical Education Institutes.

Course Content: New Technologies in Diesel and Petrol Injection and Vehicle Diagnosis – Hardware and Software.

Basic Training for Students on Diesel & Gasoline Systems

Course Code: NEI – 1

Duration: 1 day

Place: JCCs

Objective: To make participants knowledgeable about new automotive technologies.

Participants: Final Year Students from Technical Education Institutes.

Course Content: New Technologies in Diesel and Petrol Injection, Vehicle Diagnosis – Hardware and Software,
and Product Knowledge on New Automotive Technologies and Accessories.

Diesel Basics for Students

Course Code: VEH

Duration: 1 day

Place: JCCs

Objective: To provide basic knowledge on Vehicle Systems.

Participants: Students from Polytechnics, newly appointed Technicians employed with Bosch Authorised
Representatives.

Course Content: Diesel Engine Basics, Fuel Injection System Basics, and other Vehicular Systems.
46 47
 Courses for Educational Institutions Courses for Educational Institutions
Workshop on Bosch In-Line Diesel Fuel Injection Systems Course on Vehicle Diagnosis for Students

Course Code: INS Course Code: NEI-D

Duration: 1 day Duration: 2 days

Place: JCCs Place: JCCs

Objective: To provide knowledge on all Bosch Products, and Test & Diagnostic Equipment. Objective: To make participants understand Vehicle Diagnosis using KTS & ESI[tronic].

Participants: Lecturers from Engineering Colleges, Polytechnics, and other Educational Institutions. Participants: Students from Technical Institutes.

Course Content: Basic Knowledge & Updates on latest developments on all Bosch Automotive Products, and Course Content: Diesel & Gasoline Engine Management, Diagnosis on Vehicles using KTS and ESI[tronic].
Test & Diagnostic Equipment.

Practical Course on Automotive Systems

Course Code: NEI – 4W

Duration: 12 days

Place: JCC – Pune

Objective: A comprehensive training programme to educate students on Diesel / Gasoline Engine

Management, Advanced and New Technologies, Range of Bosch Fuel Injection S ystems, Bosch
Gasoline Fuel Injection Systems, Vehicle Diagnosis concept, Software, Hardware, and Vehicle
Auto Electrical and Battery Management.

Participants: Final Year Engineering and Diploma Students from Technical Institutes.

Course Content: Diesel and Gasoline Engine Basics, Engine Management Systems, New and Advanced
Technologies in Diesel Fuel Injection, Gasoline Fuel Injection, Live Diagnosis on the Vehicle &
Vehicle Auto Electricals. Demonstration on testing of the range of Bosch Fuel Injection / Auto
Electrical Products on respective Test Benches.

Comprehensive Course on Automotive Systems for Students

Course Code: NEI-D & ES

Duration: 3 days

Place: JCC – Chennai

Objective: To make participants understand the working of Diesel Fuel Injection System and Energy
System in Vehicles.

Participants: Students from Technical Institutes.

Course Content: Diesel Engine Basics, Working Principles of Bosch Diesel System (Inline, Distributor, and Rail)
and Energy System (Starter and Alternator).

48 49
 Courses for Educational Institutions Courses for Educational Institutions
New
Course on CR Vehicle Diagnosis for Students Internship for Engineering/Diploma Students

Course Code: NEI-CRSD Course Code: Internship-4

Duration: 1 day Duration: 5 days

Place: JCC – Chennai Place: BTC/JCC’S

Objective: To make participants understand Diagnosis on Vehicles fitted with Common Rail System. Objective: To provide knowledge on Bosch Products.

Participants: Students from Technical Institutes. Participants: Students from technical institutes.

Course Content: Diesel Engine Management, Diagnosis on Vehicles fitted with Common Rail System using KTS
and ESI[tronic].
New
Internship for Engineering/Diploma Students
New
Internship for Engineering/Diploma Students Course Code: Internship-5

Duration: 12 days
Course Code: Internship-1
Place: BTC/JCC’S
Duration: 15 days
Objective: To provide knowledge on Bosch Products.
Place: BTC/JCC’S
Participants: Students from technical institutes.
Objective: To provide knowledge on Bosch Products.

Participants: Students from technical institutes.

Workshop on Basics, Working principles and Functions New
of Bosch Products
New
Internship for Engineering/Diploma Students Course Code: W-NEI

Duration: 1 day
Course Code: Internship-2
Place: BTC/JCC’S
Duration: 30 days
Objective: To provide knowledge on Bosch Products.
Place: BTC/JCC’S
Participants: Lecturers / Students from technical institutes.
Objective: To provide knowledge on Bosch Products.

Participants: Students from technical institutes.

Session on Vehicle Systems (Powertrain, Chassis and Body) New
New Course Code: Vehicle Systems Online
Internship for Engineering/Diploma Students
Duration: 2 hours
Course Code: Internship-3 Place: Online

Duration: 120 days Objective: To provide knowledge on Bosch Products.

Place: BTC/JCC’S Participants: Lecturers / Students from technical institutes.

Objective: To provide knowledge on Bosch Products.

Participants: Students from technical institutes.

50 51
 Courses for Educational Institutions Courses for Educational Institutions
New New
Session on 2W Systems Session on Vehicle AC Systems & Functions

Course Code: 2W - Online Course Code: AC Systems Online

Duration: 2 hours Duration: 2 hours

Place: Online Place: Online

Objective: To provide knowledge on 2-Wheeler systems. Objective: To provide knowledge on Vehicle AC systems.

Participants: Students from technical institutes. Participants: Students from technical institutes.

New
Session on Diesel Engine Basics and Bosch Fuel System Layout

Course Code: Diesel Systems - Online

Duration: 2 hours

Place: Online

Objective: To provide knowledge on Bosch Fuel Injection Systems.

Participants: Students from technical institutes.

New
Session on Exhaust Gas Treatment – BS6

Course Code: EGT - Online

Duration: 2 hours

Place: Online

Objective: To provide knowledge on Bosch EGT Systems.

Participants: Students from technical institutes.

New
Session on Bosch Auto Electrical Parts

Course Code: AEL - Online

Duration: 2 hours

Place: Online

Objective: To provide knowledge on auto-electrical products.

Participants: Students from technical institutes.

52 53
 Eligibility and Enrolment Procedure For training courses in the eastern region, please apply to:
Regional Trainer – East
Joint Certification Centre:
C/o: MCKV Institute of Engineering,
243, G.T.Road(N), Liluah
Howrah-711 204, West Bengal, India
Ph.: +91 91638 22255.
E-mail: [email protected]
The Bosch Training Centre For trainings in the western region, please apply to:
Your partner in educating your specialists Regional Trainer – West
Qualified, experienced, and competent personnel are essential to handle the service of Bosch products. Bosch Limited
Send your personnel for training and further education to the Bosch Training Centre / Joint Certification Centre, and 3rd Floor, Godrej Millennium, Koregaon Park Rd, Vasani Nagar
ensure that you remain competitive in the future. Koregaon Park, Pune – 411 001, Maharashtra
Mobile: +91 90820 07650
Following are the types of training that are being offered: E-mail: [email protected]
For trainings in the northern region, please apply to:
Web-Based Training Hands-On / Practical Training Classroom Training
Regional Trainer – North
Bosch Limited
Basic level training is web-based and can be completed by your staff on our training website: www.boschtraining.in
C/o Sunehri Exports, Plot No. B1 / E24
A Bosch Training Passport is issued to each Trainee after completion of the Training. Mohan Co-operative Industrial Estate
Mathura Road, New Delhi – 110 044
Mobile: +91 98713 07355
Eligibility E-mail: [email protected]

f Candidates who are employed with and sponsored by Bosch Authorised Representatives,
Original Equipment Customers and their Dealers, State Transport Undertakings, Defence Organisations, Important Information
Government Departments, ITIs, Diploma Colleges, Engineering Colleges, and JOC Colleges, etc., are normally
considered eligible for training. Working Hours:
f Candidates should have adequate working knowledge of the medium of instruction. JCCs: Monday to Friday – 10 a.m. to 5 p.m.
BTCs: Monday to Friday – 9 a.m. to 4 p.m.
Fee f Candidates are required to make their own arrangements for boarding, lodging, and transport.
f For Courses / Seminars at BTCs: ` 2,500 per day / person + taxes If any assistance is required, candidates may approach the respective Training Centres.
f For Courses / Seminars at JCCs: ` 1,500 per day / person + taxes f In order to maintain the quality of training (during practical demonstration classes), the number of candidates for
f For Specialized Courses / Expert Courses: ` 5,000 per day / person + taxes each course is restricted to 12.
f Onsite Training for OE : ` 20,000 INR + extra person fee ` 1,500/day/person + 18% tax f Seats are reserved on a ‘first-come first-served’ basis. Candidates are to be deputed only after receipt of the
f Onsite Training for BS Partners/STU/DEF/INS: ` 5,000 INR + extra person fee ` 2,500/day/person + tax confirmation from Bosch.
f Online training fee: ` 500 + 18% tax per hour/person. f Candidates reporting for a course without our confirmation will be accommodated only if there is a vacancy.
f For Neutral Workshop Courses: ` 3,000 per day / person + taxes
f Candidates attending the course should bring a letter of introduction from the sponsoring organisation.
Note: Training Fee will be debited to Network directly by Bosch Limited (DD not required). For other customers like
OEMs, etc., the Application Form is to be accompanied by DD. f Although precautions are taken for the safety of the trainees, the company assumes no responsibility for any injury
caused to them or loss of personal articles during the training period.
How to Apply
f No refund of the Seminar / Course fee for non-participation will be made, nor will it be adjusted for another
Bosch Training Courses are offered at Bengaluru, Chennai, Kolkata, Pune, New Delhi. Candidates may apply at any Training Seminar / Course.
Centre of their choice. Application should be made in the prescribed application form, giving the required particulars to f Photography is prohibited within the factory premises.
the respective BTC / JCC of the region.
f Applications should reach the Training Centre at least four weeks in advance of the required Seminar / Course.
Corporate Office:
Bosch Limited f Participants shall be held responsible for the loss of any Bosch property from the Training Centre during
Automotive Aftermarket, P. O. Box No: 3000, Hosur Road, Adugodi, Bengaluru – 560 030, Karnataka the training course.
Mobile: +91 97399 43263, E-mail: [email protected] f Participants should not bring laptops, mobile phones with camera, floppy diskettes, CDs / DVDs, video cameras,
Bengaluru: Bosch Training Centre pen drives, or memory sticks into the Training Centre.
Bosch Limited
Naganathapura Plant, Electronics City P. O., Post Box No: 6887, Bengaluru – 560 100, Karnataka
Ph: (080) 4103 5540 / 41 / 42 / 43, +91 87544 55400. Fax: (080) 2852 1608 / 2852 1239
E-mail: [email protected]

For training courses in the southern region, please apply to:

Regional Trainer – South
Bosch Limited
'Sabari Sunnyside' 2nd Floor, Middle Wing, 8/17, Shafee Mohammed Road, Off Greams Road, Thousand Lights,
Chennai – 600006, Tamil Nadu | Ph: 91 87544 55400 | E-mail: [email protected]
54 55
55
Notes: Notes:
_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________
57
 Notes:
_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________
58 59
Bosch Limited
Bosch Training Centre
Automotive Aftermarket
Gate No: 4, Naganathapura Plant
Electronics City P. O., Post Box No: 6887
Bengaluru – 560 100
Ph: (080) 4103 5540 / 41 / 42 / 43
Telefax: (080) 2852 1239 / 2852 1608 | +91 87544 55400
Toll-free No: 1800 108 1081 | www.boschautoparts.in | www.boschtraining.in