Scribd
Upload
54 views5 pages

Cardok Turntable - Data Sheet

The Cardok Turntable data sheet provides specifications for an automated parking system. It simplifies parking in narrow areas both indoors and outdoors. Standard models support a 3,000kg load on a 5,000mm diameter platform that rotates at 1RPM. Custom dimensions and higher payloads are available options. Installation requires a concrete pit with drainage and an electrical supply. Regular maintenance contracts are also available to service the system.

Uploaded by

Jhoan Aparicio
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
54 views5 pages

Cardok Turntable - Data Sheet

The Cardok Turntable data sheet provides specifications for an automated parking system. It simplifies parking in narrow areas both indoors and outdoors. Standard models support a 3,000kg load on a 5,000mm diameter platform that rotates at 1RPM. Custom dimensions and higher payloads are available options. Installation requires a concrete pit with drainage and an electrical supply. Regular maintenance contracts are also available to service the system.

Uploaded by

Jhoan Aparicio
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Cardok Turntable – Data Sheet

CARDOK Turntable

Simplifies parking in narrow areas, indoor and outdoor

Secure, Fast and Bespoke

Installation for private houses, buildings, hotels, offices, …

Cardok Sàrl • rue de Riant Coteau 11 • 1196 Gland • Switzerland • Tel. : 0041 22 77 66 051 • [email protected]
Any reproduction or copying is prohibited without our written permission. Subject to change. Ver.11-2018
Cardok Turntable – Data Sheet

Dimensions
(Built to measure, all dimensions can be changed and adapted upon request and following acceptance)

Technical zone
Need to provide a space on a wall of 1.0m2 for the electric cabinet and the control panel.

Need to install 1 watertight conduit for electric cables. The min diameter is 60mm (cast in the concrete)

Cardok Sàrl • rue de Riant Coteau 11 • 1196 Gland • Switzerland • Tel. : 0041 22 77 66 051 • [email protected]
Any reproduction or copying is prohibited without our written permission. Subject to change. Ver.11-2018
Cardok Turntable – Data Sheet

Characteristics: Standard Option

Platform load: 3000kg per platform 3500kg / other

Dimensions available: 5000mm 4500 / 5500 / 6000 / other

Pit depth: 460mm 150 / other

Speed: 1RPM

Concrete pit (built by customer)


The thickness of the walls needs to be defined by an engineer depending on the quality of the land. The walls of the pit must be formed
of concrete and must to be perfectly flat and vertical without any protrusions.

Concrete quality according to the static requirement of the building but for the dowel fastening we require a concrete quality of min.
C20/25.

Provision of a watertight passage is necessary for electrical supply of min. 60mm in diameter.

(made to measure, all dimensions can be changed upon request and upon acceptance by Cardok)

Pit floor : to be defined by the engineer


Pit depth : standard 460mm
Diameter : standard 5060mm

Cardok Sàrl • rue de Riant Coteau 11 • 1196 Gland • Switzerland • Tel. : 0041 22 77 66 051 • [email protected]
Any reproduction or copying is prohibited without our written permission. Subject to change. Ver.11-2018
Cardok Turntable – Data Sheet

Drainage (to be performed by the customer)


Need to install a drainage grid at the bottom of the pit. Where this is not possible, it’s necessary to create a slope and a drainage area
to install a small sump pump. The necessary dimensions are min 300x300mm and 200mm deep.

To prevent any possibility of contamination of the ground water we recommend giving the pit floor an oil resistant coating as a means
of protecting the environment and to facilitate cleaning.

Installation
Depending on the site configuration, it may be necessary to use a crane to carry the parts to its dedicated place. The cost of the crane
is at the charge of the client.

Finish (to be performed by the customer)


The finishing of the platform is up to the customer’s wish and is not included in the price. We recommend a coating matching the floor
around the Turntable such as tiles, mosaic, ribbed aluminium sheets etc. It must be determined before the system is built as the weight
and the thickness of the coating needs to be considered. The standard coating will be 40mm thick and its weight will not exceed
75kg/m2. Other options are possible upon request.

Cardok can propose various options of finish such as stainless sheets, ribbed aluminium sheets, anodic oxidized aluminium sheets or
other.

Electricity
Power supply must be provided by the client and must be done by a qualified electrician - 230VAC / 1PH / 1.5kW

One electrical box must be installed close to the Turntable, to install the control panel with an emergency switch and key push buttons
to operate the Turntable.

Noise
The engine produces very little noise.

Maintenance
Regular maintenance by qualified personnel can be provided by means of an Annual Service Contract.

Temperature
The installation is designed to operate between -25°C and +50°C. Atmospheric Humidity: 50% at +40°C.

Cardok Sàrl • rue de Riant Coteau 11 • 1196 Gland • Switzerland • Tel. : 0041 22 77 66 051 • [email protected]
Any reproduction or copying is prohibited without our written permission. Subject to change. Ver.11-2018
Cardok Turntable – Data Sheet

The electrical control panel must be installed in dry local between +3° C and +30° C.

Systems are designed for snow load zone II with up to 0.75 kN/m2 in accordance to DIN 1055-5.
If the local circumstances differ from the above, please contact us to provide it.

Conformity test
All our systems are checked according to EC machinery directive 2006/42/EC.

Notes
In case higher loading is required e.g. passage for fire brigade or delivery fuel oil, please contact us.

The manufacturer reserves the right to modify or alter above specifications.

Cardok Sàrl • rue de Riant Coteau 11 • 1196 Gland • Switzerland • Tel. : 0041 22 77 66 051 • [email protected]
Any reproduction or copying is prohibited without our written permission. Subject to change. Ver.11-2018

You might also like