Mission m73 Loudspeaker: Roduct Nformation Uide
Mission m73 Loudspeaker: Roduct Nformation Uide
Mission m73 Loudspeaker: Roduct Nformation Uide
Construction
Enclosure 19mm high density particle board
Baffle High rigidity 22mm MDF with high-impact ABS baffle moulding
Ports Anti-turbulence port tube with optional resistive loading
Grille Acoustically transparent
Damping Acoustic long-hair fibre
Electrical
L.F. Unit 160mm bonded woven glass composite cone with 25mm voice coil
HF unit 25mm sheer Micro-Fibre soft dome with FF cooling
Cross-Over Acoustic Second Order
Terminals Gold-plated, bi-wire multi-way binding posts
Specifications
Enclosure Type 2-Way Reflex Loaded
Frequency Response ± 3 dB 48Hz to 20kHz
Sensitivity SPL/m/2.83V 90 dB
Cross-Over Frequency 2.8 kHz
Effective Volume 18.6 Litres
Nominal Impedance 8 Ohm compatible (min. 4.0 Ohms)
Recommended amplifier power 25 - 100 W/Ch
Cabinet Dimensions (H x W x D) 850 x 200 x 305 (mm)
Finish Graphite Black and European Beech
Features Benefits
Unique IDG inverted driver geometry - smooth phase response throughout the cross-over region
Rigid, profiled MDF baffle - improved transient performance
High Impact ABS moulded baffle - excellent HF dispersion and low diffraction to improve stereo
imaging and create precise images in space
High dB/watt efficiency - equivalent to extra power for amplifier - greater dynamic range
Anti-turbulence port - clean, tight bass with optional resistive loading for room optimisation
Sheer Micro-Fibre soft dome HF unit - ensures excellent high and low level resolution
Neodymium HF unit magnet - improved microdynamics and reduced signal induced demagnetisation effects
Laser trimmed pressure balanced dome - improved dynamics and reduced time smear
High-quality crossover components - Silicon Steel inductors reduce level dependant distortion.
Audiophile grade Polyester Capacitors increase detail transmission
Bonded woven glass composite LF cone - stiff and light ensuring good sensitivity with superb LF response
Pressure balanced, ventilated spider - improved dynamics and reduced time smear
Magnetically shielded - suitable for all AV systems
Setting Up
• RUN IN for a minimum of 24 hours with music programme
• Place within 10 - 40cm from rear wall, smaller rooms need less distance
• Utilise optional resistive loading to optimise bass performance for wall-mount locations
• Ensure minimal toe-in is used, imaging will be impaired
• May be used with any competent budget electronics
Will clearly show improvements as source improves
PRELIMINARY INFORMATION