Scribd
Upload
54 views

Single Phase Transformer Problems: To Step 110 V Ac Down To 20 V Ac, The Turns Ratio Must Be

The document discusses ten problems related to single-phase transformers. It provides information on transformer specifications like voltage ratios, number of turns, power ratings, and frequency. It asks the reader to calculate values like induced emf, flux, turns ratios, and currents using the specification details and transformer equations. The problems cover a range of transformer scenarios and calculations related to their design and operation.

Uploaded by

shahakadir
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
54 views

Single Phase Transformer Problems: To Step 110 V Ac Down To 20 V Ac, The Turns Ratio Must Be

The document discusses ten problems related to single-phase transformers. It provides information on transformer specifications like voltage ratios, number of turns, power ratings, and frequency. It asks the reader to calculate values like induced emf, flux, turns ratios, and currents using the specification details and transformer equations. The problems cover a range of transformer scenarios and calculations related to their design and operation.

Uploaded by

shahakadir
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Single Phase Transformer Problems

1. A single-phase, 50-Hz transformer has 100 turns on the primary winding and 400
turns on the secondary winding. If the primary winding is connected to a 50-Hz, 230-
V supply, calculate (a) the emf induced in the secondary winding, and (b) the
maximum value of the flux in the core.

2. A single-phase, 50-Hz transformer has 30 turns on primary and 350 turns on


secondary. If the primary winding is connected to a 230-V, 50-Hz supply, calculate (a)
peak value of the flux in the core, (b) the voltage induced in the secondary winding,
and (c) the primary current when the secondary current is 100 A. Neglect the losses.

3. A 500-kVA, 11000-V/400-V, 50-Hz, single-phase transformer has 100 turns on the


secondary winding. Calculate (a) the approximate number of turns on the primary
winding, (b) the approximate values of the primary and secondary current, and (c) the
maximum value of the flux in the core.

4. To step 110 V ac down to 20 V ac, the turns ratio must be _______.

5. A 3300/250 v, JU Tiz, single-phase transformer is built on a core having 70 turns on


the low-voltage winding. Calculate (a) the value of the maximum flux, (b) the number
of turns on the high voltage winding.

6. A transformer with 800 primary turns and 200 secondary turns is supplied from a 100
V a.c. supply. Calculate the secondary voltage and the volts per turn.

7. A transformer with an output voltage of 4200 V is supplied at 230 V. if the secondary


has 2000 turns, calculate the number of primary turns.

8. The emf per turn for a single phase, 2310/220 V, 50 Hz transformer is approximately
13 volts. Calculate (a) the number of primary and secondary turns

9. A 25 KVA transformer has a voltage ratio of 3300/400 V. Calculate the primary and
secondary currents.

10.A 125 KVA transformer having primary voltage of 2000 V at 50 Hz has 182 primary
and 40 secondary turns. Neglecting losses, calculate (a) the full-load primary and
secondary currents, (b) the no-load secondary induced e.m.f. and (c) the maximum
flux in the core.

You might also like