LP-S070

7 inch Wide Screen, TFT Color LCD Type

Graphic Panel + PLC Function Logic Panel LP-S070
Features
● Supports cost reducing, space saving, easy control
by PLC+HMI+I/O module integration
● Adopts 7 inch wide TFT LCD for realizing True Color
with 16,777,216 colors
● Analog touch method
: Free tag arrangement than matrix touch method
● Supports basic I/O of input 16-point, output 16-point
● Supports several device
(auxiliary device 10K Word, data device 10K Word, etc)
● Built-in large capacity memory
(program memory: 8,000 step, drawing memory: 16MB)
● Built-in position control function
: Provides simultaneous output for max. 100kHz pulse 2-point 7 inch TFT Color LCD
● Easy software upgrade available on website
(1) LP firmware file (2) GP Editor (drawing program)
(3) SmartStudio (Logic program) (4) Additional protocol
(5) Language and font, etc
● Data logger function
: Supports data gathering and backup of controller
● Supports variable image library
● Enables to monitor multi stations and multi channels at the same time
● Supports several interface
: Easy to connect various external devices with RS232C 2 ports and RS232C/RS422 multi communication ports
: Enables to extend additional external I/O (when connecting Autonics ARM Series, one communication cable
enables to extend 64-point per address, up to 31 address)

RS485
+ Max. 64-point (ARM 8 units × 8-point)

LP-S070 1 basic unit 7 expansion units

● Supports several fonts: Supports window true type and several bitmap font (Selectable)
● Device monitoring function: Enables to monitor/control variable of connected control through communication
port
● Printer/Barcode reader connection: Enables to print out alarm history, to read barcode
Please read “Caution for your safety” in operation
manual before using.

Manual
Visit our webwite (www.autonics.com) to download 'GP Editor user manual' or 'SmartStudio user manual', 'SmartStudio
programing manual', 'LP Series command manual', 'LP-S070 user manual', 'GP, LP user manual for communication'.
● GP Editor user manual
It describes how to write screen data, and is about related usage of LP-S070 HMI function.
● SmartStudio user manual, SmartStudio programming manual, LP Series command manual
It contains install method and usage, commands, etc of SmartStudio.
● GP, LP user manual for communication: It describes connection for external devices such as PLC.
● LP-S070 user manual: It describes general information of the installation and usage of LP-S070 and system Contents.

Ordering Information
Monitor Display Power I/O
Model Item Series Color Interface Module I/O connector
size unit supply composition
RS232C, RS422, Terminal block
LP-S070-T9D6-C5T
USB HOST connector
USB DEVICE, IN: Ribbon cable
LP-S070-T9D6-C5R TFT Ethernet All-in- 16-point,
Logic 16,777,216 connector
S series 7 inch Color 24VDC one
panel color RS232C (2), USB type Terminal block
LP-S070-T9D7-C5T LCD OUT:
HOST 16-point connector
USB DEVICE, Ribbon cable
LP-S070-T9D7-C5R Ethernet connector

R-26
 Logic Panel

Specifications (A)
Photoelectric
Model LP-S070-T9D6-C5T LP-S070-T9D6-C5R LP-S070-T9D7-C5T LP-S070-T9D7-C5R Sensors

I/O connector type Terminal block connector Ribbon cable connector Terminal block connector Ribbon cable connector (B)
Fiber
Power supply 24VDC Optic
Sensors
Allowable voltage range 90 to 110% of power supply
Power consumption Max. 7.2W (C)
Door/Area
LCD type 7 inch TFT Color LCD Sensors

Resolution 800×480 dots

Graphic drawing
performance

(D)
Display area 152.4mm×91.44mm Proximity
Sensors
Color 16,777,216 color
LCD view angle Within each 60°/ 45°/ 60°/ 60° of top/bottom/left/right (E)
Pressure
Backlight White LED Sensors

Brightness Adjustable by software

(F)
Language※1 English, Korean Rotary
Graphic drawing

• Vector font • 6×8, 8×8 ASCII character, high definition numbers Encoders
performance

Text • 8×16 ASCII characters, 16×16 character by each country

(1 to 8 times bigger for width, 0.5 to 5 times bigger for height) (G)
Connectors/
Graphic drawing memory 16MB Sockets

Number of user screen 500 pages

(H)
Touch switch Analog touch Temperature
Controllers
Command Basic command: 28, application command: 233
Program capacity 8K step (I)
performance

SSRs / Power
Processing time Average: Approx. 2us/basic command, application command Controllers
Control

I/O control type Batch processing

Computer control mode Repeated-doubling method, interrupt processing (J)
Counters
Device range *Refer to LP-S070 user manual
Special function Positioning function *Refer to LP-S070 user manual
(K)
Asynchronous method: Each port of RS232C, RS422 Timers
Serial interface
Each port of RS232C, RS422 Two ports of RS232C
USB interface Each of USB Host, USB Device (Version 1.1) (L)
Panel
Meters
Ethernet interface IEEE802.3 (U), 10/100Base-T
Real-time controller RTC embedded (M)
Tacho /
Battery life cycle Approx. 3 years at 25℃ Speed / Pulse
Meters
Insulated resistance Min. 100MΩ (at 500VDC megger)
Ground 3rd grounding (max. 100Ω) (N)
Display
Noise immunity The squre wave noise (pulse width 1㎲) by the noise simulator with ± 0.5kV Units

Withstanding voltage 500VAC 50/60Hz for a minute

(O)
Vibra Mechanical 0.75mm amplitude at frequency of 10 to 55Hz (for 1 min.) in each X, Y, Z direction for 1 hour Sensor
Controllers
-tion Malfunction 0.5mm amplitude at frequency of 10 to 55Hz (for 1 min.) in each X, Y, Z direction for 10 min.
Mechnical 300m/s² (approx. 30G) in each X, Y, Z direction for 3 times (P)
Shock Switching
Malfunction 100m/s² (approx. 10G) in each X, Y, Z direction for 3 times Mode Power
Supplies
Environ Ambient temperature 0 to 50℃, storage: -20 to 60℃
(Q)
-ment Ambient humidity 35 to 85%RH, storage: 35 to 85%RH Stepper Motors
& Drivers
Protection IP65F (for front panel) & Controllers

Accessory Fixing bracket: 4EA, Battery (included) (R)

Graphic/
Approval Logic
Panels
Unit weight Approx. 540g
(S)
※1: Language could be added in the future. ※Environment resistance is rated at no freezing or condensation. Field
Network
Input/Output Performance Devices

Input performance Output performance (T)

Input point 16-point Output point 16-point Software

Insulation method Photo coupler insulation Insulation method Photo coupler insulation
Voltage range 19.2 to 28.8VDC Voltage range 19.2 to 28.8VDC
Rated input voltage 24VDC Rated input voltage 24VDC
Contact X0 to X5: Approx. 10mA
Input resistance Max. load current 0.1A/1point, 1.6A/1COM
Contact X6 to XF: Approx. 4mA
Input resistance Contact X0 to X5: 2.2㏀, Contact X6 to XF: 5.6㏀ Max. voltage falling when ON Max. 0.2VDC
Response time 1ms Response time 1ms
Common method 16-point/1COM Common method 16-point/1COM
Acceptable wire 0.3 to 0.7mm2 Acceptable wire 0.3 to 0.7mm2

R-27
LP-S070

Functional Description
Figure display Line, rectangle, circle, text, bitmap
Numeral display Displays the designated device as numerical value. (decimal, hexadecimal, octal, binary, real number)
ASCII display Displays the designated device value as ASCII character.
Time display Displays current time or date.
Alarm history Registers alarm history.
Alarm list Displays generated (not backed up) alarm.
Comment display Displays the designated comment as device status or value.
Lamp Displays lamp as device status.
Part display Displays the designated parts as device status and value.
Tags

Line graph Displays several device values with a graph of broken line.
Trend graph Displays change of device value for time with a graph of broken line.
Bar graph Displays a device value with a bar graph.
Statistic graph Displays a ratio of several device values with pie graph.
Panel meter Displays a device value as panel meter.
Touch key Screen is switched, word/bit device values are set when it touched.
Numeral input Configures user input value in device.
ASCII input Configures user input ASCII code value in device.
System information function Monitors/Controls LP operation from PLC.
Recipe function Reads/Writes several PLC device collectively.
Security function Only acceptable user can observe/operate important data.
Barcode read function Connects barcode reader, read barcode.
Floating alarm function Warning message is floated when alarm is generated.
Time operation Specific bit device is ON/OFF for designated day and time.
Overlap window Available to form dynamically overlapping another base screen on the base one.

Dimensions (unit: mm)

● Panel cut-out
Min. 240
185
Max. 4-R3
+ 1.1
186 0
+ 1.0
0
126

Min. 175

※ Panel thickness
194 6.5 28.5 : Max. 4mm

● Fixing bracket
15
M4 BOLT
134

146
125

R-28
 Logic Panel

Unit Description (A)

Photoelectric
Sensors
Input Output Power Run/Stop
terminal terminal LED Switch (B)
Fiber
Optic
Sensors

(C)
Door/Area
Sensors
Program
status LED (D)
Proximity
Sensors

(E)
Pressure
Sensors

(F)
Rotary
Encoders
USB
LCD Screen RS422 RS232C Host (G)
Power terminal or or Ethernet USB Connectors/
RS232C RS232C Device Sockets
block -A -B
Fixing bracket
(2 slots is in upper side, 2 slot is in lower side) (H)
Temperature
Controllers

(I)
SSRs / Power
Mounting slot Controllers

for bracket
(J)
Counters
● Ethernet port: For connecting LAN cable and hub, use direct cable, and for connecting PC directly, use cross cable.
● USB Device: It is used to upload and download project (It is required to install USB driver on PC), and when connecting
(K)
to PC, it can be used as a USB memory (PC recognizes it as a removable disk). Timers

● USB Host: It used to manage data and upgrade firmware.

● RS232C, RS422 port: For more information, refer to page R-32 and ' Serial Interface' of GP/LP Common Features. (L)
Panel
Meters

Installation (M)
Tacho /
Speed / Pulse
1. Set LP-S070 in panel. Meters
2. Set fixing brackets in 4 slots (2 slots is in upper side, 2 slots is in lower side).
(N)
Display
Units

(O)
Sensor
Controllers
(Upper side)
(P)
Switching
Mode Power
Mounting slot Supplies
for bracket
(Q)
Stepper Motors
& Drivers
& Controllers

(Lower side) (R)

Graphic/
Logic
Panels

(S)
Field

3. Tighten fixing bracket with M4 screw driver and tightening torque is 0.3 to 0.5N.m.
Network
Devices

(T)
Software

M4 Screw driver

R-29
LP-S070

Input·Output Wiring
LP-S070-T9D6 (7)-C5R
● Input wiring (source type input module) ● Output wiring (sink type output module)
X0 X8 L Y0 Y8 L
0 8 0 8
X1 X9 L Y1 Y9 L
1 9 1 9
X2 XA Y2 YA
2 A L 2 A L
X3 XB Y3 YB
3 B L 3 B L
24VDC X4 XC Y4 YC
4 C L 4 C L
X5 XD Y5 YD
5 D L 5 D L
X6 XE Y6 YE
6 E L 6 E L
X7 XF Y7 YF
7 F L 7 F L
COM1 COM2
+ + + +
COM3 COM4
+ + 24VDC - -

LP-S070-T9D6 (7)-C5T
● Input wiring (source type input module) ● Output wiring (sink type output module)
X0 L Y0
0 0
X1 L Y1
1 1
X2 L Y2
2 2
X3 L Y3
3 3
X4 L Y4
4 4
X5 L Y5
5 5
X6 L Y6
6 6
X7 L Y7
7 7
24VDC X8 Y8
8 L 8
X9 L Y9
9 9
XA L YA
A A
XB L YB
B B
XC L YC
C C
XD L YD
D D
XE L YE
E E
XF L YF
F F
COM1 + +
COM2 24VDC
+ -
※Check the pin number of the case before wiring.

Sold Separately
I/O terminal block and I/O cable
Suitable I/O terminal block INPUT/OUTPUT Suitable I/O cable
AFS-H20 INPUT
CJ-HPHP20-V1N -1ANR
(Interface terminal block) OUTPUT
ABS-H16PA (TN)-NN
OUTPUT CJ-HPHP20-V1N -1APR
(Relay terminal block)
AFE4-H20-16LF INPUT CJ-HPHP20-V1N -1BNR
(Sensor connector terminal block) OUTPUT CJ-HPHP20-V1N -1APR
CJ-HP20-VP -R (OPEN type cable)
- -
CJ-HP20-VP -L (OPEN type cable)
※It is only for ribbon cable connector (hirose connector) type.
※" " is cable length. (Basic specification 010: 1m, 020: 2m, the others are option)
※For more information, refer to "I/O Terminal Blocks & Cables Catalog".

Communication cable (RS232C, RS422 port)

For serial connectable cable to connect PLC and external devices, refer to page R-32 for "GP/LP Communication Cables".

R-30