EDITION: EXPORT - PUBLISHED: 11/2012

NEW NEW
PRODUCT NAM
ES

NEW PRODUCT 2012

ODUCT NAMES
NAMES
2012

NEW ES
PRODUCT NAM

2012

NEW CT NAM
ES

2012
PRODU

ProRox Product catalogue

Industrial insulation

116121 RTI PRODUCTCATALOOG EXPORT.indd 1 27/11/12 11:34

 Excellence in technical
insulation solutions
ROCKWOOL© Technical Insulation – an independent entity
within the ROCKWOOL Group – develops innovative technical
insulation solutions for the process industry and the
shipbuilding & offshore market. Through our two product
lines, ProRox and SeaRox, we offer a full spread of products
and systems guaranteeing the highest possible thermal
and firesafe insulation of all technical installations. Our +70
years of experience is reflected in a complete set of high-
grade products and expert advice. Today, we remain fully
committed to providing the very best service in the market
and a total range of cutting-edge insulation solutions.

Your highest quality is our minimum demand

All ROCKWOOL Technical Insulation solutions within our
two product families, ProRox and SeaRox, meet the most
stringent quality and safety standards. All products and
constructions have been tested according to the latest
regulations and approved by all major classification societies.
As an innovation-driven company we demand excellence. In
every segment we keep searching for new systems, methods
and solutions. We endeavour to develop ever more efficient
products and to constantly optimise production processes and
processing technologies.

Up-to-date information? Wherever, whenever?

We can help!
As a highly skilled professional you are always looking for
the best possible end result. The quickest way to achieve that
is with ROCKWOOL Technical Insulation premium products
and the detailed information that comes with them, which
always incorporates the latest technical findings. That’s why
you should always check that the information you have is up-
to-date. If you have any questions about specific application
issues, working methods or product properties, please visit
our website at www.rockwool-rti.com or contact us on
+31(0)475 35 38 35.

The best solutions, built on solid expertise

In addition to providing outstanding products, ROCKWOOL
Technical Insulation is able to draw on in-depth expertise
to ensure that end users in the petrochemicals, power
generation, shipbuilding, offshore and the process industries
are given the best and most advanced insulation solution. Both
in the process industry as in the marine & offshore industry,
our stone wool products offer the best possible protection
against heat and energy loss, fire, noise and other unwanted
influences. Our sales teams will be delighted to advise you in
drawing up technical and project specifications.

116121 RTI PRODUCTCATALOOG EXPORT.indd 2 27/11/12 11:34

 NEW NE
NEW
PRODUC
CT
PRODU 20
Our people, your profit
The key to our success is the combination of excellent
Table of contents
2012
PRODUCT NA
MES
NAMES
insulation products and outstanding people who know exactly
what they are talking about. Thanks to their expertise and ProRox - Industrial insulation 4-32
extensive experience, we can offer exceptional stone wool
solutions and an impeccable service. With technical support Application selector 6-7
on a high level we are prepared to help you to choose the
optimal solutions and secure the necessary documentation.
NEW MES
NEW NAME OLD NAME PRODUCT NA

Part of the ROCKWOOL Group Products

ProRox PS 960 Rockwool 850
2012 8
ROCKWOOL Technical Insulation is an independent
ProRox PS 970 Rockwool 851 10
organisation within the ROCKWOOL Group, the world’s
ProRox WM 940NL Rockwool 160 12
largest producer of stone wool products. ROCKWOOL
ProRox WM 950NL Rockwool 164 14
International A/S is based in Hedehusene, Denmark. The
ProRox WM 960NL Rockwool 159 16
parent company has a net turnover of around € 1.85 billion
ProRox WM 970NL Rockwool 168 18

NEW
in 2011. ROCKWOOL International has 26 factories in Europe,
ProRox MA 520 ALU Rockwool Duraflex 20
North America and Asia, and has around 9,300 employees.
ProRox SL 920 Rockwool Flexiboard 21 S
E
T NAM

2012
ProRox SL 930 Rockwool Multiboard PRODUC 22
ROCKWOOL has a melting point above 1000°C
ProRox SL 940 Rockwool 231 23
Our stone wool products meet the strictest fire protection
ProRox SL 950 Rockwool HT 600 24
classes and make an active contribution to the fire safety of a
ProRox SL 960 Rockwool 233 25
building or installation. Other insulation materials combust
ProRox SL 970 Rockwool HT 660 26
at much lower temperatures and often release dangerous
ProRox SL 980 Rockwool HT 700 27
substances during combustion. Stone wool is non-combustible
ProRox SL 540 Rockwool 251.001 28
and only melts above 1000°C. As a result, ROCKWOOL
ProRox SL 560 Rockwool 251 29
insulation inhibits the spread of fire, ultimately saving lives
ProRox SL 580 Rockwool CRS 30
and protecting constructions & installations.
ProRox LF 970 Rockwool Loose Fill 31
ProRox GR 903 Rockwool Granulate 32
Stone wool protects people and the environment
ROCKWOOL products offer effective protection and optimal
performance for the entire life cycle of the installation. Delivery & storage 33
According to independent research ROCKWOOL is one of
the most durable products available with an unequalled
combination in the field of environmental improvement,
energy savings, CO2 reduction, acoustic insulation and fire
safety. A positive ‘carbon footprint’: During its entire life cycle,
ROCKWOOL insulation will save more than 20,000 times the
carbon emissions caused by its production. The fire retardant
and fire insulating characteristics of our stone wool products
deliver superior protection to people, property and the
environment.

Founding Partner of EIIF

ROCKWOOL Technical Insulation
was one of the founding partners of
the European Industrial Insulation
Foundation (EIIF), which has
established itself as a resource for European Industrial
Insulation Foundation
industries that need to reduce CO²
Founding Partner
emissions.

116121 RTI PRODUCTCATALOOG EXPORT.indd 3 27/11/12 11:34

 New product names, logical structure
Each product name is structured in the same clear way:

e.g.: P roRox WM 9 7 0 ALU N L

Product range
2 last digits = other product characteristics

Product identifier Application code

M = Wired Mats
W 1st digit: 3 = acoustics, 5 = compression,
SL = Slabs 9 = thermal insulation
PS = Pipe Sections
MA = Mats Product variants
ALU = reinforced aluminium

116121 RTI PRODUCTCATALOOG EXPORT.indd 4 27/11/12 11:34

 ProRox
Industrial insulation
In the view of our rebranding strategy we have adapted and
clarified the entire range of ROCKWOOL Technical Insulation
­products. From now on, all our insulation solutions for
­technical installations in the process industry will be part of
the ProRox range. The main characteristic of these products
is their high thermal insulation capacity. Next to this, they
of course also comply with the most stringent requirements
on fire resistance and acoustic insulation. Below you will get
an overview of the ProRox range and its new names.

NEW NAME OLD NAME

ProRox PS 960 ROCKWOOL 850 8

ProRox PS 970 ROCKWOOL 851 10
ProRox WM 940NL ROCKWOOL 160 12
ProRox WM 950NL ROCKWOOL 164 14
ProRox WM 960NL ROCKWOOL 159 16
ProRox WM 970NL ROCKWOOL 168 18
ProRox MA 520 ALU ROCKWOOL Duraflex 20
ProRox SL 920 ROCKWOOL Flexiboard 21
ProRox SL 930 ROCKWOOL Multiboard 22
ProRox SL 940 ROCKWOOL 231 23
ProRox SL 950 ROCKWOOL HT 600 24
ProRox SL 960 ROCKWOOL 233 25
ProRox SL 970 ROCKWOOL HT 660 26
ProRox SL 980 ROCKWOOL HT 700 27
ProRox SL 540 ROCKWOOL 251.001 28
ProRox SL 560 ROCKWOOL 251 29
ProRox SL 580 ROCKWOOL CRS 30
ProRox LF 970 ROCKWOOL Loose Fill 31
ProRox GR 903 ROCKWOOL Granulate 32

116121 RTI PRODUCTCATALOOG EXPORT.indd 5 27/11/12 11:34

 Industrial insulation

Application selector

Thermal insulation

Pipe work

ø <356 ø >356

NEW NAME OLD NAME

ProRox PS 960 Rockwool 850
Pipe Sections
ProRox PS 970 Rockwool 851

ProRox WM 940NL Rockwool 160

ProRox WM 950NL Rockwool 164

Wired Mats
ProRox WM 960NL Rockwool 159

ProRox WM 970NL Rockwool 168

Mats ProRox MA 520 ALU Rockwool Duraflex

ProRox SL 920 Rockwool Flexiboard

ProRox SL 930 Rockwool Multiboard

ProRox SL 940 Rockwool 231

ProRox SL 950 Rockwool HT 600

ProRox SL 960 Rockwool 233

Slabs
ProRox SL 970 Rockwool HT 660

ProRox SL 980 Rockwool HT 700

ProRox SL 540 Rockwool 251.001

ProRox SL 560 Rockwool 251

ProRox SL 580 Rockwool CRS

Loose Fill ProRox LF 970 Rockwool Loose Fill

Industrial Hand fill ProRox GR 903 Rockwool Granulate

116121 RTI PRODUCTCATALOOG EXPORT.indd 6 27/11/12 11:34

 Thermal insulation

Columns, Tanks, Vessels

Larg voids &
Cold boxes Ovens Furnaces
cavities
wall (ø <5m) wall (ø >5m) Roof

Remarks  IN 4140 (Insulation work on industrial installations

D
Due to an almost limitless range of applications, and building equipment)
we have not provided detail information for all the BS 5970 (Code of practice for the thermal insulation
applications. Information is available in the following of pipework, ductwork, associated equipment and
manuals/standards for industrial insulation: other industrial installations)
CINI manual ‘Insulation for industries’ 7
AGI Q101 (Insulation work on power plant For specific applications, our ROCKWOOL Technical
components) Insulation sales team will be pleased to advise you.

116121 RTI PRODUCTCATALOOG EXPORT.indd 7 27/11/12 11:34

 NEW
ProRox PS 960 NAME Old name: Rockwool 850 Pipe Section

Approximate quantities per 40ft HC container in m1

Ø mm 25 30 40 50 60 80 100 120

17 12000 10000 6400 3600

21 10000 8000 5200 3600 2400
27 10000 8000 4800 3600 2400
33 8000 6400 3600 3200 2000
42 6400 4800 3600 2400 1600
48 6000 4800 3600 2400 1600
57 4800 3600 2400 2000 1600
60 4400 3600 2400 2000 1600 1440 1044
Packed in cartons 64 3600 3600 2400 1600 1992 1420 912
70 3600 3200 2000 1600 1944 1400 896
Packed in shrinkfoil
76 3600 2800 2000 1600 1738 1116 880

All pipe sections 1000 mm in 83 2800 2400 2000 1992 1694 1098 864
length. 89 2400 2400 1600 1944 1650 1080 848
102 2000 1600 1600 1694 1440 912 714
108 2000 1600 1944 1650 1400 896 714
Other dimensions 114 1600 1600 1896 1480 1260 880 700 468
(up to diameters of 121 1600 1600 1694 1440 1098 864 686 468
915 mm) are available
127 1600 1968 1672 1400 1080 848 672 456
upon request.
133 1992 1920 1480 1260 1062 742 672 456
140 1944 1716 1440 1116 1044 728 564 444
159 1650 1440 1116 1044 880 686 468 360
169 1440 1400 1080 896 848 672 456 350
194 1098 1400 880 728 700 468 360 330
219 896 1062 728 686 564 444 340 320
245 728 880 672 552 456 350 330 240
267 686 714 480 456 444 340 310 232
273 686 672 480 456 360 330 248 232
280 672 672 468 444 360 330 248 232
305 468 564 444 350 340 310 232 224
324 456 444 350 340 330 240 224 216
356 350 340 330 320 248 232 216 156
368 340 340 320 310 240 224 216 150
406 320 310 240 232 224 216 150 144
419 280 240 232 224 208 150 144
456 232 224 216 208 150 144 102
508 216 156 150 150 138 96 96
558 150 144 144 138 96 90 60
610 138 96 96 90 56 56

116121 RTI PRODUCTCATALOOG EXPORT.indd 8 27/11/12 11:34

 Applications mechanical load. As a guide, the following
ProRox PS 960 is a pre-formed stone wool pipe intermediate distances can be used:
section. The sections are supplied split and hinged for Horizontal pipe work: 3 to 4 m
easy snap-on assembly, and are suitable for the Vertical pipe work: 5 to 6 m
thermal and acoustic insulation of industrial pipe work.
Finishing
Compliance All pipe sections should be finished with a metal
ProRox PS 960 Pipe Sections full comply with the (e.g. aluminium) cladding. Where necessary,
requirements as set by internationally recognized expansion joints are required to cater for expansion of
Note standards like EN14303, CINI 2.2.03, ASTM C547: the pipes. Both the lengthwise and circular joints are
All steel components Grade A for type I, II, IV. fastened with sheet-metal screws: hard aluminium or
exposed to a corrosive stainless steel 1/2”, 8 per metre. Close expansion
environment should be Installation guidelines joints with a steel tensioning wire. Connections to
cleaned, degreased and Assembly mountings, head and end caps, etc. should be made
coated with a protective Fit the ProRox PS 960 closely around the pipe, with watertight using an appropriate sealant.
finish. the lengthwise (horizontal) joint turned towards the
underside. The lengthwise joints must be staggered at
an angle of at least 30 degrees to each other. The shell
is secured with galvanised binding wire (thickness Advantages
0.5 mm, at least 3/m). For insulation thickness above Excellent fit provides optimal performance
100 mm (or temperatures > 250°C) the insulation Easy to handle and to install
should be applied in at least two layers. In the case of Wide range of diameters and insulation
multi-layer insulation it is recommended that the thicknesses
lengthwise and crosswise joints are staggered Suitable for use over stainless steel
(‘masonry bond’). For temperatures up to 350°C, a support
construction is not generally necessary
Support construction
On pipes where mechanical loading (e.g. strong
vibrations) of the insulation is expected and/or the
temperature is higher than 300°C, a support structure
(spacers) should be constructed. The number of
spacers depends on the temperature and the

Product properties
Performance Norms

Tm (°C) 50 100 150 200 250 300 350 EN ISO 8497

Thermal conductivity
λ (W/mK) 0.040 0.046 0.054 0.064 0.077 0.092 0.111 ASTM C335

650°C (1200°F) EN 14707

Maximum Service Temperature
750°C (1382°F) ASTM C411
Maximum surface performance 650°C (1200°F) ASTM C447
EuroClass A1L EN 13501-1
Reaction to fire Surface burning characteristics; Flame spread = passed, ASTM E84 (UL 723)
Smoke development = Passed
Nominal density 125 kg/m3 (7.8 lb/ft3) EN 13470

Chloride content < 10 ppm (AS - Quality) EN 13468

Conforms to the stainless steel corrosion specification as ASTM C795
Water leachable chloride content
per ASTM test methods C 692 and C 871
< 10 mg/kg (ph-value neutral to slightly alkaline) ASTM C871

< 1 kg/m2 EN 13472

Water absorption
Water vapour absorption (Vapor sorption) ± 0.02% vol ASTM C1104/C1104M
Water vapour diffusion resistance μ=1 EN 14303
Air Flow Resistivity > 80 kPa.s/m2 EN 29053
Designation code MW EN 14303-T9(T8 if Do<150)-ST(+)650-WS1-CL10 EN 14303

116121 RTI PRODUCTCATALOOG EXPORT.indd 9 27/11/12 11:34

 NEW
ProRox PS 970 NAME Old name: Rockwool 851 Heavy duty pipe section

Approximate quantities per 40ft HC container in m1

Insulation thickness in mm
Ø mm 25 30 40 50 60 80 100 120

17 12000 10000 6400 3600

21 10000 8000 5200 3600 2400
27 10000 8000 4800 3600 2400
33 8000 6400 3600 3200 2000
42 6400 4800 3600 2400 1600
48 6000 4800 3600 2400 1600
57 4800 3600 2400 2000 1600
60 4400 3600 2400 2000 1600 1440 1044
Packed in boxes 64 3600 3600 2400 1600 1992 1420 912
70 3600 3200 2000 1600 1944 1400 896
Shrink-wrapped pipe sections
76 3600 2800 2000 1600 1738 1116 880
All pipe sections 1000 mm in 83 2800 2400 2000 1992 1694 1098 864
length. 89 2400 2400 1600 1944 1650 1080 848
102 2000 1600 1600 1694 1440 912 714
108 2000 1600 1944 1650 1400 896 714
Other dimensions 114 1600 1600 1896 1480 1260 880 700 468
(up to diameter of
121 1600 1600 1694 1440 1098 864 686 468
915 mm) are available
upon request. 127 1600 1968 1672 1400 1080 848 672 456
133 1992 1920 1480 1260 1062 742 672 456
140 1944 1716 1440 1116 1044 728 564 444
159 1650 1440 1116 1044 880 686 468 360
169 1440 1400 1080 896 848 672 456 350
194 1098 1400 880 728 700 468 360 330
219 896 1062 728 686 564 444 340 320
245 728 880 672 552 456 350 330 240
267 686 714 480 456 444 340 310 232
273 686 672 480 456 360 330 248 232
280 672 672 468 444 360 330 248 232
305 468 564 444 350 340 310 232 224
324 456 444 350 340 330 240 224 216
356 350 340 330 320 248 232 216 156
368 340 340 320 310 240 224 216 150
406 320 310 240 232 224 216 150 144
419 280 240 232 224 208 150 144
456 232 224 216 208 150 144 102
508 216 156 150 150 138 96 96
558 150 144 144 138 96 90 60

10

116121 RTI PRODUCTCATALOOG EXPORT.indd 10 27/11/12 11:34

 Applications spacers depends on the temperature and the
ProRox PS 970 is a pre-formed high density stone wool mechanical load. As a guide, the following
pipe section. The sections are supplied split and hinged intermediate distances can be used:
for easy snap-on assembly, and are especially suitable Horizontal pipe work: 3 to 4 m
for the thermal and acoustic insulation of industrial Vertical pipe work: 5 to 6 m
pipe work which is exposed to high temperature and
light (e.g. vibrations) mechanical loads. Finishing
All pipe sections should be finished with a metal
Compliance (e.g. aluminium) cladding. Where necessary,
ProRox PS 970 Pipe Sections full comply with the expansion joints are required to cater for expansion of
requirements as set by internationally recognized the pipes. Both the lengthwise and circular joints are
Note standards like EN14303, CINI 2.2.03, ASTM C547: Grade fastened with sheet-metal screws: hard aluminium or
All steel components A for type I, II, IV. stainless steel 1/2”, 8/metre. Close expansion joints
exposed to a corrosive with a steel tensioning wire. Connections to
environment should be Installation guidelines mountings, head and end caps etc. should be made
cleaned, degreased and Assembly watertight using an appropriate sealant.
coated with a protective Fit the ProRox PS 970 closely around the pipe, with the
finish. lengthwise (horizontal) joint turned towards the
underside. The lengthwise joints must be staggered at
an angle of at least 30 degrees to each other. The shell Advantages
is secured with galvanised binding wire (thickness 0.5  Suitable for heavy duty applications which
mm, at least 3/m). For insulation thickness above 100 are exposed to high temperatures and high
mm (or temperatures > 250°C) the insulation should be mechanical loads
applied in at least two layers. In the case of multi-layer Excellent fit provides optimal performance
insulation it is recommended that the lengthwise and Easy to handle and to install
crosswise joints are staggered (‘masonry bond’). Wide range of diameters and insulation
thicknesses
Support construction Suitable for use over stainless steel
On pipes where mechanical loading (e.g. strong For temperatures up to 350°C, a support
vibrations) of the insulation is expected and/or the construction is not generally necessary
temperature is higher than 300°C, a support structure
(spacers) should be constructed. The number of

Product properties
Performance Norms

Tm (°C) 50 100 150 200 250 300 350 EN ISO 8497

Thermal conductivity
λ (W/mK) 0.040 0.046 0.053 0.062 0.073 0.085 0.099 ASTM C335

680°C (1256°F) EN 14707

Maximum Service Temperature
750°C (1382°F) ASTM C411
Maximum surface performance 650°C (1200°F) ASTM C447
EuroClass A1L EN 13501-1
Reaction to fire Surface burning characteristics; Flame spread = passed, ASTM E84 (UL 723)
Smoke development = Passed
Nominal density 140 kg/m3 (8.7 lb/ft3) EN 13470

Chloride content < 10 ppm (AS - Quality) EN 13468

Conforms to the stainless steel corrosion specification as ASTM C795
Water leachable chloride content
per ASTM test methods C 692 and C 871
< 10 mg/kg (ph-value neutral to slightly alkaline) ASTM C871

< 1 kg/m2 EN 13472

Water absorption
Water vapour absorption (Vapor sorption) ± 0.02% vol ASTM C1104/C1104M
Water vapour diffusion resistance μ=1 EN 14303
Air Flow Resistivity > 90 kPa.s/m2 EN 29053
Designation code MW EN 14303-T9(T8 if Do<150)-ST(+)680-WS1-CL10 EN 14303

11

116121 RTI PRODUCTCATALOOG EXPORT.indd 11 27/11/12 11:34

 NEW
ProRox WM 940NL NAME Old name: Rockwool 160 Wired mat

Thickness Length Width Packaging m2 per

mm mm mm m2/roll 40ft HC container*

30 8000 500 4.0 2200

40 6000 500 3.0 1650
50 5000 500 2.5 1375
60 4000 500 2.0 1100
75 4000 500 2.0 1100
80 3000 500 1.5 825
100 3000 500 1.5 750
120 3000 500 1.5 720

The following variants are available on request:

• ProRox WM 940 SWNL: Stainless steel mesh and stitching wire
Shrink-wrapped • ProRox WM 940 SNL: Galvanised steel mesh and stainless steel stitching wire
• ProRox WM 940 ALUNL: Galvanised steel mesh and stitching wire with addition of aluminium foil between mesh and stone wool
*Approximate quantities. • ProRox WM 940 SW ALUNL: Stainless steel mesh and stitching wire with addition of aluminium foil between mesh and stone wool

Applications Advantages
ProRox WM 940NL is a lightly bonded stone wool mat Excellent thermal insulation
stitched on galvanised wire mesh using galvanised wire. Suitable for use over irregular surfaces
The wired mat is suitable for thermal acoustic Available in a wide range of thicknesses up to
insulation of industrial applications reachting high 120 mm
temperatures, such as industrial pipe work, boiler Suitable for use over stainless steel
walls, furnaces and smoke ducts. Stainless steel mesh,
stainless steel binding wire and/or aluminium foil
facing are available upon request.

Compliance
ProRox WM 940NL Wired Mats fully comply with the
requirements as set by internationally recognized
standards like EN14303, CINI 2.2.02 and ASTM C592
Type I and II.

Product properties
Performance Norms

T (°C) 50 100 150 200 250 300 350 400 500 600 EN 12667
Thermal conductivity
λ (W/mK) 0.039 0.047 0.055 0.064 0.075 0.088 0.103 0.119 0.157 0.205 ASTM C177

600°C (1112°F) EN 14706

Maximum Service Temperature
750°C (1382°F) ASTM C411
EuroClass A1 EN 13501-1
Reaction to fire Surface burning characteristics; Flame spread = passed, ASTM E84
Smoke development = Passed (UL 723)
Nominal density 70 kg/m3 (4.4 lb/ft3) EN 1602
Chloride content < 10 ppm (AS - Quality) EN 13468
Water leachable Conforms to the stainless steel corrosion specification ASTM C795
chloride content as per ASTM test methods C 692 and C 871
< 10 mg/kg (ph-value neutral to slightly alkaline) ASTM C871
< 1 kg/m2 EN 1609
Water absorption Water vapour absorption (Vapor sorption) ± 0.02% vol ASTM C1104/
C1104M
Water vapour diffusion resistance μ=1 EN 14303
Air Flow Resistivity > 20 kPa.s/m2 EN 29053
12 Designation code MW EN 14303-T2-ST(+)600-WS1-CL10 EN 14303

116121 RTI PRODUCTCATALOOG EXPORT.indd 12 27/11/12 11:34

 Note Installation guidelines
All steel components Assembly Finishing
exposed to a corrosive Cut the wired mat to length, so that the mat fits the The insulation should be finished with a metal
environment should be pipe with slight pre-stressing. The closing joints must (e.g. ­aluminium) cladding. Where necessary,
cleaned, degreased and be staggered at an angle of at least 30 degrees to each expansion joints are provided to cater for expansion of
coated with a protective other. The closing joints of the mats (lengthwise and the pipes. Both the lengthwise and circular joints are
finish. circular) must be wired together using steel wire (min. fastened with sheet-metal screws: hard aluminium or
0.5 mm) or secured with mat hooks. Stainless steel stainless steel 1/2’, 8/metre. Close the expansion
pipes and pipes with a temperature of > 400°C should joints with a steel tensioning wire. Connections to
preferably be insulated with ProRox WM 940 SWNL, in mountings, head and end caps, etc. should be made
which both the mesh and the stitching wire is stainless watertight using a suitable sealant.
steel. If the mats are assembled in multiple layers,
both the lengthwise and circular joints must be
staggered (‘masonry bond’).

Support construction
Given the limited pressure resistance of wired mats,
in most cases a support is required for the board
cladding. As a guideline, assume that a support is
required every 3 to 4 metres.

13

116121 RTI PRODUCTCATALOOG EXPORT.indd 13 27/11/12 11:34

 NEW
ProRox WM 950NL NAME Old name: Rockwool 164 Wired mat

Thickness Length Width Packaging m2 per

mm mm mm m2/roll 40ft HC container*

30 8000 500 4.0 2200

40 6000 500 3.0 1650
50 5000 500 2.5 1375
60 4000 500 2.0 1100
75 4000 500 2.0 1100
80 3000 500 1.5 825
100 3000 500 1.5 750
120 3000 500 1.5 720

The following variants are available on request:

• ProRox WM 950 SWNL: Stainless steel mesh and stitching wire
Shrink-wrapped • ProRox WM 950 SNL: Galvanised steel mesh and stainless steel stitching wire
• ProRox WM 950 ALUNL: Galvanised steel mesh and stitching wire with addition of aluminium foil between mesh and stone wool
*Approximate quantities. • ProRox WM 950 SW ALUNL: Stainless steel mesh and stitching wire with addition of aluminium foil between mesh and stone wool

Applications Advantages
ProRox WM 950NL is a lightly bonded stone wool mat Suitable for high temperature application
stitched on galvanised wire mesh using galvanised wire. Flexible application
The wired mat is suitable for thermal and acoustic Available in a wide range of thicknesses
insulation of industrial applications reaching high Suitable for use over stainless steel
temperatures, such as industrial pipe work, boiler
walls, furnaces and smoke ducts.

Compliance
ProRox WM 950NL Wired Mats fully comply with the
requirements as set by internationally recognized
standards like EN14303, CINI 2.2.02 and ASTM C592
Type I, II and III.

Product properties
Performance Norms

T (°C) 50 100 150 200 250 300 350 400 500 600 640
Thermal conductivity EN 12667
λ (W/mK) 0.039 0.045 0.053 0.062 0.072 0.084 0.097 0.112 0.146 0.192 0.213

640°C (1184°F) EN 14706

Maximum Service Temperature
750°C (1382°F) ASTM C411
EuroClass A1 EN 13501-1
Reaction to fire Surface burning characteristics; Flame spread = passed, ASTM E84
Smoke development = Passed (UL 723)
Nominal density 80 kg/m3 (5.0 lb/ft3) EN 1602
Chloride content < 10 ppm (AS - Quality) EN 13468
Water leachable Conforms to the stainless steel corrosion specification ASTM C795
chloride content as per ASTM test methods C 692 and C 871
< 10 mg/kg (ph-value neutral to slightly alkaline) ASTM C871
< 1 kg/m 2
EN 1609
Water absorption Water vapour absorption (Vapor sorption) ± 0.02% vol ASTM C1104/
C1104M
Water vapour diffusion resistance μ=1 EN 14303
Air Flow Resistivity > 40 kPa.s/m2 EN 29053
Designation code MW EN 14303-T2-ST(+)640-WS1-CL10 EN 14303
14

116121 RTI PRODUCTCATALOOG EXPORT.indd 14 27/11/12 11:34

 Note Installation guidelines
All steel components Assembly Finishing
exposed to a corrosive Cut the wired mat to length, so that the mat fits the The insulation should be finished with a metal
environment should be pipe with slight pre-stressing. The closing joints must (e.g. aluminium) cladding. Where necessary,
cleaned, degreased and be staggered at an angle of at least 30 degrees to each expansion joints are provided to cater for expansion
coated with a protective other. The closing joints of the mats (lengthwise and of the pipes. Both the lengthwise and circular joints
finish. circular) must be wired together using steel wire (min. are fastened with sheet-metal screws: hard
0.5 mm) or secured with mat hooks. Stainless steel aluminium or stainless steel 1/2”, 8/metre. Close the
pipes and pipes with a temperature of > 400°C should expansion joints with a steel tensioning wire.
preferably be insulated with ProRox WM 950 SWNL, in Connections to mountings, head and end caps etc.
which both the mesh and the stitching wire is stainless should be made watertight using a suitable sealant.
steel. If the mats are assembled in multiple layers,
both the lengthwise and circular joints must be
staggered (‘masonry bond’).

Support construction
Given the limited pressure resistance of wired mats,
in most cases a support is required for the board
cladding. As a guideline, assume that a support is
required every 3 to 4 metres.

15

116121 RTI PRODUCTCATALOOG EXPORT.indd 15 27/11/12 11:34

 NEW
ProRox WM 960NL NAME Old name: Rockwool 159 Heavy duty wired mat

Thickness Length Width Packaging m2 per

mm mm mm m2/roll 40ft HC container*

30 8000 500 4.0 2200

40 6000 500 3.0 1650
50 5000 500 2.5 1375
60 4000 500 2.0 1100
75 4000 500 2.0 934
80 3000 500 1.5 825
100 3000 500 1.5 750
120 3000 500 1.5 720

The following variants are available on request:

• ProRox WM 960 SWNL: Stainless steel mesh and stitching wire
Shrink-wrapped • ProRox WM 960 SNL: Galvanised steel mesh and stainless steel stitching wire
• ProRox WM 960 ALUNL: Galvanised steel mesh and stitching wire with addition of aluminium foil between mesh and stone wool
*Approximate quantities. • ProRox WM 960 SW ALUNL: Stainless steel mesh and stitching wire with addition of aluminium foil between mesh and stone wool

Applications Advantages
ProRox WM 960NL is a lightly bonded heavy stone wool Suitable for heavy duty applications which
mat stitched on galvanised wired mesh with galvanised are exposed to high temperatures and high
wire. The wired mat is especially suitable for industrial mechanical loads
installations such as high-pressure steam pipes, Resistant to high temperatures
reactors, furnaces, etc. where high demands are made Flexible application
on the temperature resistance of the insulation. Available in a wide range of thicknesses
Suitable for use over stainless steel
Compliance
ProRox WM 960NL Wired Mats fully comply with the
requirements as set by internationally recognized
standards like EN14303, CINI 2.2.02 and ASTM C592
Type I, II and III.

Product properties
Performance Norms

T (°C) 50 100 150 200 250 300 350 400 500 600 660 EN 12667
Thermal conductivity
λ (W/mK) 0.039 0.045 0.052 0.059 0.068 0.078 0.089 0.102 0.131 0.167 0.191 ASTM C177

660°C (1220°F) EN 14706

Maximum Service Temperature
750°C (1382°F) ASTM C411
EuroClass A1 EN 13501-1
Reaction to fire Surface burning characteristics; Flame spread = passed, ASTM E84
Smoke development = Passed (UL 723)
Nominal density 100 kg/m3 (6.2 lb/ft3) EN 1602 EN 1602
Chloride content < 10 ppm (AS - Quality) EN 13468
Water leachable Conforms to the stainless steel corrosion specification ASTM C795
chloride content as per ASTM test methods C 692 and C 871
< 10 mg/kg (ph-value neutral to slightly alkaline) ASTM C871
< 1 kg/m 2
EN 1609
Water absorption Water vapour absorption (Vapor sorption) ± 0.02% vol ASTM C1104/
C1104M
Water vapour diffusion resistance μ=1 EN 14303
Air Flow Resistivity > 60 kPa.s/m2 EN 29053
Designation code MW EN 14303-T2-ST(+)660-WS1-CL10 EN 14303
16

116121 RTI PRODUCTCATALOOG EXPORT.indd 16 27/11/12 11:34

 Note Installation guidelines
All steel components Assembly Finishing
exposed to a corrosive Cut the wired mat to length, so that the mat fits the The insulation should be finished with a metal
environment should be pipe with slight pre-stressing. The closing joints must (e.g. aluminium) cladding. Where necessary,
cleaned, degreased and be staggered at an angle of at least 30 degrees to each expansion joints are provided to cater for expansion of
coated with a protective other. The closing joints of the mats (lengthwise and the pipes. Both the lengthwise and circular joints are
finish. circular joints) must be wired together using e.g. steel fastened with sheet-metal screws: hard aluminium or
wire min. 0.5 mm or secured with mat hooks. stainless steel 1/2”, 8/metre. Close the expansion
Stainless steel pipes and pipes with a temperature joints with a steel tensioning wire. Connections to
of > 400°C should preferably be insulated with mountings, head and end caps, etc. should be made
ProRox WM 960 SWNL, in which both the mesh and watertight using a suitable sealant.
the stitching wire is in stainless steel. If the mats are
assembled in multiple layers, both the lengthwise and
circular joints must be staggered (‘masonry bond’).

Support construction
Given the limited pressure resistance of wired mats,
in most cases a support is required for the board
cladding. As a guideline, assume that a support is
required every 3 to 4 metres.

17

116121 RTI PRODUCTCATALOOG EXPORT.indd 17 27/11/12 11:34

 NEW
ProRox WM 970NL NAME Old name: Rockwool 168 Heavy duty wired mat

Thickness Length Width Packaging m2 per

mm mm mm m2/roll 40ft HC container*

30 8000 500 4.0 2200

40 6000 500 3.0 1650
50 5000 500 2.5 1375
60 4000 500 2.0 1100
75 4000 500 2.0 934
80 3000 500 1.5 825
100 3000 500 1.5 750

Shrink-wrapped The following variants are available on request:

• ProRox WM 970 SWNL: Stainless steel mesh and stitching wire
*Approximate quantities. • ProRox WM 970 SNL: Galvanised steel mesh and stainless steel stitching wire
• ProRox WM 970 ALUNL: Galvanised steel mesh and stitching wire with addition of aluminium foil between mesh and stone wool
• ProRox WM 970 SW ALUNL: Stainless steel mesh and stitching wire with addition of aluminium foil between mesh and stone wool

Applications Advantages
ProRox WM 970NL is a lightly bonded heavy stone wool Suitable for heavy duty applications which
mat stitched on galvanised wired mesh with galvanised are exposed to high temperatures and high
wire. The wired mat is especially suitable for industrial mechanical loads
installations where high temperature and vibration Resistant to high temperatures
resistance is required. Flexible application
Available in a wide range of thicknesses
Compliance Suitable for use over stainless steel
ProRox WM 970NL Wired Mats fully comply with the
requirements as set by internationally recognized
standards like EN14303, CINI 2.2.02 and
ASTM CC592 Type I, II and III.

Product properties
Performance Norms

T (°C) 50 100 150 200 250 300 350 400 500 600 680 EN 12667
Thermal conductivity
λ (W/mK) 0.040 0.045 0.051 0.058 0.066 0.075 0.085 0.096 0.123 0.157 0.188 ASTM C177

680°C (1256°F) EN 14706

Maximum Service Temperature
750°C (1382°F) ASTM C411
EuroClass A1 EN 13501-1
Reaction to fire Surface burning characteristics; Flame spread = passed, ASTM E84
Smoke development = Passed (UL 723)
Nominal density 128 kg/m3 (8.0 lb/ft3) EN 1602
Chloride content < 10 ppm (AS - Quality) EN 13468
Water leachable Conforms to the stainless steel corrosion specification ASTM C795
chloride content as per ASTM test methods C 692 and C 871
< 10 mg/kg (ph-value neutral to slightly alkaline) ASTM C871
< 1 kg/m2 EN 1609
Water absorption Water vapour absorption (Vapor sorption) ± 0.02% vol ASTM C1104/
C1104M
Water vapour diffusion resistance μ=1 EN 14303
Air Flow Resistivity > 80 kPa.s/m2 EN 29053
Designation code MW EN 14303-T2-ST(+)680-WS1-CL10 EN 14303

18

116121 RTI PRODUCTCATALOOG EXPORT.indd 18 27/11/12 11:34

 Note Installation guidelines
All steel components Assembly Finishing
exposed to a corrosive Cut the wired mat to length, so that the mat fits the The insulation should be finished with a metal
environment should be pipe with slight pre-stressing. The closing joints (e.g. aluminium) cladding. Where necessary expansion
cleaned, degreased and must be staggered at an angle of at least 30 degrees joints are provided to cater for expansion of the pipes.
coated with a protective to each other. The closing joints of the mats Both the lengthwise and circular joints are fastened
finish. (lengthwise and circular joints) must be wired together with sheet-metal screws: hard aluminium or stainless
using steel wire (min. 0.5 mm) or secured with mat steel 1/2”, 8/metre. Close the expansion joints with a
hooks. Stainless steel pipes and pipes with a steel tensioning wire. Connections to mountings, head
temperature of > 400°C should preferably be insulated and end caps, etc. should be made watertight using a
with ProRox WM 970 SWNL, in which both the mesh and suitable sealant.
the stitching wire is in stainless steel. If the mats are
assembled in multiple layers, both the lengthwise and
circular joints must be staggered (‘masonry bond’).

Support construction
Given the limited pressure resistance of wired mats,
in most cases a support is required for the board
cladding. As a guideline, assume that a support is
required every 3 to 4 metres.

19

116121 RTI PRODUCTCATALOOG EXPORT.indd 19 27/11/12 11:34

 NEW
ProRox MA 520 ALU NAME Old name: Rockwool Duraflex Load bearing mat

Thickness Length Width Packaging m2 per

mm mm mm m2/duo roll 40ft HC container

30 8000 500 8.0 2336

40 6000 500 6.0 1752
50 5000 500 5.0 1400
60 4500 500 4.5 1170
70 4000 500 4.0 1000
80 3500 500 3.5 875
90 3000 500 3.0 780
100 3000 500 3.0 700

Shrink-wrapped Applications Advantages

ProRox MA 520 ALU is a compression resistant stone Suitable for heavy duty applications which
wool insulation mat bonded onto fibreglass reinforced are exposed to high temperatures and high
aluminium foil. The insulation mat is suitable for the mechanical loads
thermal and acoustic insulation of especially large Resistant to high temperatures
diameter piping, vessels, ducts and equipment up to Flexible application
intermediate temperatures. Available in a wide range of thicknesses
Suitable for use over stainless steel
Compliance
ProRox MA 520 ALU full comply with the requirements
as set by internationally recognized standards like
EN14303 and CINI 2.2.05.

Product properties
Performance Norms

T (°C) 50 100 150 200 250 300 400 500 EN 12667

Thermal conductivity
λ (W/mK) 0.044 0.053 0.064 0.077 0.092 0.110 0.156 0.216 ASTM C177

500°C (932°F) EN 14706

Maximum Service Temperature The outer foil temperature is restricted to 80°C (176°F).
ProRox MA 520 ALU should therefore not be applied at
operating temperatures in excess of 300°C.

EuroClass A1 EN 13501-1
Reaction to fire Surface burning characteristics; Flame spread = passed, ASTM E84 (UL 723)
Smoke development = Passed
Nominal density 60 kg/m3 (3.7 lb/ft3)
Chloride content < 10 ppm (AS - Quality) EN 13468
Conforms to the stainless steel corrosion specification ASTM C795
Water leachable chloride content
as per ASTM test methods C 692 and C 871
< 10 mg/kg (ph-value neutral to slightly alkaline) ASTM C871
< 1 kg/m2 EN 14303
Water absorption
Water vapour absorption (Vapor sorption) ± 0.02% vol EN 12086
μ=1 EN 14303
Water vapour diffusion resistance
Sd > 200 m (for Alu-foil faced product) EN 12086
Compression resistance > 10 kPa (at 10% deformation) EN 826
Air Flow Resistivity > 20 kPa.s/m2 EN 29053
Designation code MW EN 14303-T3-ST(+)500-CS(10)10-WS1-MV2-CL10 EN 14303

20

116121 RTI PRODUCTCATALOOG EXPORT.indd 20 27/11/12 11:34

 NEW
ProRox SL 920 NAME Old name: Rockwool Flexiboard Flexible slab

Thickness Length Width Packaging m2 per

mm mm mm m2/pack 40ft HC container*

25 1000 600 14.4 2419

30 1000 600 12.0 2016
40 1000 600 9.0 1512
50 1000 600 7.2 1210
60 1000 600 6.0 1008
70 1000 600 3.6 907
75 1000 600 4.8 806
80 1000 600 3.6 756
100 1000 600 3.6 605
Available on request with a one-sided facing of fibreglass reinforced aluminium foil (Alu) or glass tissue

Boards are shrink-wrapped

Applications Compliance
*Approximate quantities. ProRox SL 920 is a flexible stone wool slab. ProRox SL ProRox SL 920 Slabs fully comply with the requirements
920 is suitable for the thermal insulation of horizontal as set by internationally recognized standards like
and vertical walls. A one-sided facing with fibreglass EN14303, CINI 2.2.01 and ASTM C612 Type IA.
reinforced aluminium foil (Alu) or glass tissue is
available upon request.
Advantages
Flexible application
Available in a wide range of thicknesses
Product properties
Performance Norms

T (°C) 50 100 150 200 250 EN 12667

Thermal conductivity
λ (W/mK) 0.042 0.054 0.069 0.086 0.106 ASTM C177

250°C (482°F) EN 14706

450°C (842°F) ASTM C411
Maximum Service Temperature
In case of aluminium facing the outer foil temperature
should be limited to 80°C (176°F)
EuroClass A1 EN 13501-1
Reaction to fire Surface burning characteristics; Flame spread = passed, ASTM E84 (UL 723)
Smoke development = Passed
Nominal density 40 kg/m3 (2.5 lb/ft3) EN 1602

Conforms to the stainless steel corrosion specification as

Water leachable chloride content ASTM C795
per ASTM test methods C 692 and C 871
< 1 kg/m2 EN 1609
Water absorption
Water vapour absorption (Vapor sorption) ± 0.02% vol ASTM C1104/C1104M
μ=1 EN 14303
Water vapour diffusion resistance
Sd > 200 m (for Alu-foil faced product)
Air Flow Resistivity > 10 kPa.s/m2 EN 29053

MW EN 14303-T4(T3 if t<60)-ST(+)250-WS1
Designation code EN 14303
MW EN 14303-T4(T3 if t<60)-ST(+)250-WS1-MV2
(for Alu-foil faced product)

Installation guidelines
Mechanically fix ProRox SL 920 using self-adhesive is a risk of condensation, the insulation should be
or welded pins. provided with a vapour barrier. For external
In the case of aluminium foil facing, finish length- applications, the insulation should be finished
wise and crosswise joints with a self-adhesive with a metal, (e.g. aluminium) watertight
aluminium tape (≥75 mm). When insulating objects covering. 21
colder than the ambient temperature, where there

116121 RTI PRODUCTCATALOOG EXPORT.indd 21 27/11/12 11:34

 NEW
ProRox SL 930 NAME Old name: Rockwool Multiboard Load bearing mat

Thickness Length Width Packaging m2 per

mm mm mm m2/pack 40ft HC container*

40 1000 600 6.0 1620

50 1000 600 4.8 1210
60 1000 600 4.8 1008
70 1000 600 3.6 907
75 1000 600 3.6 756
80 1000 600 3.6 756
90 1000 600 3.0 630

Available on request with a one-sided facing of fibreglass reinforced aluminium foil (Alu) or glass tissue

Boards are shrink-wrapped Applications Advantages

ProRox SL 930 is a semi rigid stone wool slab. Available in a wide range of thicknesses
*Approximate quantities. A one-sided facing with fibreglass reinforced aluminium Semi-rigid product combined with aluminium foil
foil (Alu) or glass tissue is available upon request. or fibreglass coating provides a smart, smooth
surface finish
Compliance
ProRox SL 930 Slabs fully comply with the requirements
as set by internationally recognized standards like
EN14303, CINI 2.2.01 and ASTM C612 Type IA.

Product properties
Performance Norms

T (°C) 50 100 150 200 250 300 350 EN 12667

Thermal conductivity
λ (W/mK) 0.040 0.049 0.059 0.070 0.085 0.103 0.122 ASTM C177
350°C (662°F) EN 14706
450°C (842°F) ASTM C411
Maximum Service Temperature
In case of aluminium facing the outer foil temperature
should be limited to 80°C (176°F)
EuroClass A1 EN 13501-1
Reaction to fire Surface burning characteristics; Flame spread = passed, ASTM E84 (UL 723)
Smoke development = Passed
Nominal density 55 kg/m3 (3.4 lb/ft3) EN 1602

Conforms to the stainless steel corrosion specification as

Water leachable chloride content ASTM C795
per ASTM test methods C 692 and C 871
< 1 kg/m2 EN 1609
Water absorption
Water vapour absorption (Vapor sorption) ± 0.02% vol ASTM C1104/C1104M
μ=1 EN 14303
Water vapour diffusion resistance
Sd > 200 m (for Alu-foil faced product)
Air Flow Resistivity > 20 kPa.s/m2 EN 29053

MW EN 14303-T4(T3 if t<60)-ST(+)350-WS1
Designation code EN 14303
MW EN 14303-T4(T3 if t<60)-ST(+)350-WS1-MV2
(for Alu-foil faced product)

Installation guidelines
Mechanically fix ProRox SL 930 using self-adhesive insulating objects colder than the ambient
or welded pins. Due to the rigidity of the product, it temperature, where there is a risk of condensation,
can also be mounted in cassettes. the insulation should be provided with a vapour
In the case of aluminium foil facing, finish barrier. The insulation should be finished with a
lengthwise and crosswise joints with a self- metal (e.g. aluminium), watertight covering.
adhesive aluminium tape (≥75 mm). When
22

116121 RTI PRODUCTCATALOOG EXPORT.indd 22 27/11/12 11:34

 NEW
ProRox SL 940 NAME Old name: Rockwool 231

Thickness Length Width Packaging m2 per

mm mm mm m2/pack 40ft HC container*

25 1000 600 9.6 2419

30 1000 600 6.0 2016
40 1000 600 6.0 1512
50 1000 600 3.6 1210
60 1000 600 4.8 1008
75 1000 600 2.4 806
100 1000 600 2.4 605
120 1000 600 2.4 504

Boards are shrink-wrapped Applications Advantages

ProRox SL 940 is a rigid stone wool slab, specially Excellent thermal and acoustic insulation
*Approximate quantities. developed for the thermal and acoustic insulation of Resistant to high temperatures
technical equipment in the intermediate temperature
range.

Product properties
Performance Norms

T (°C) 50 100 150 200 250 300 350 400 EN 12667

Thermal conductivity
λ (W/mK) 0.041 0.047 0.055 0.065 0.078 0.093 0.108 0.126 ASTM C177

400°C (752°F) EN 14706

Maximum Service Temperature
500°C (932°F) ASTM C411
EuroClass A1 EN 13501-1
Reaction to fire Surface burning characteristics; Flame spread = passed, ASTM E84 (UL 723)
Smoke development = Passed
Nominal density 70 kg/m3 (4.4 lb/ft3) EN 1602

Conforms to the stainless steel corrosion specification as

Water leachable chloride content ASTM C795
per ASTM test methods C 692 and C 871
< 1 kg/m2 EN 1609
Water absorption
Water vapour absorption (Vapor sorption) ± 0.02% vol ASTM C1104/C1104M
μ=1 EN 14303
Water vapour diffusion resistance
Sd > 200 m (for Alu-foil faced product)
Air Flow Resistivity > 30 kPa.s/m2 EN 29053

MW EN 14303-T4(T3 if t<60)-ST(+)400-WS1
Designation code EN 14303
MW EN 14303-T4(T3 if t<60)-ST(+)400-WS1-MV2
(for Alu-foil faced product)

23

116121 RTI PRODUCTCATALOOG EXPORT.indd 23 27/11/12 11:34

 NEW
ProRox SL 950 NAME Old name: Rockwool HT600 Rigid slab

Thickness Length Width Packaging m2 per

mm mm mm m2/pack 40ft HC container*

25 1000 600 9.6 2592

30 1000 600 6.0 2016
40 1000 600 6.0 1620
50 1000 600 4.8 1296
60 1000 600 3.0 1008
80 1000 600 3.0 810
100 1000 600 2.4 648
120 1000 600 1.8 529

Boards are shrink-wrapped Applications Advantages

ProRox SL 950 is a strong, rigid slab, specially Suitable up to intermediate temperatures
*Approximate quantities. developed for the thermal and acoustic insulation of Retains shape
boilers, columns and vessels up to intermediate Available in a wide range of thicknesses
temperatures.

Compliance
ProRox SL 950 Slabs fully comply with the
requirements as set by internationally recognized
standards like EN14303, CINI 2.2.01 and ASTM C612
Type IA, IB, II, III, IVA and IVB.

Product properties
Performance Norms

T (°C) 50 100 150 200 250 300 350 400 500 600 640 EN 12667
Thermal conductivity
λ (W/mK) 0.039 0.045 0.053 0.062 0.073 0.084 0.097 0.112 0.144 0.186 0.205 ASTM C177

640°C (1184°F) EN 14706

Maximum Service Temperature
750°C (1382°F) ASTM C411
EuroClass A1 EN 13501-1
Reaction to fire Surface burning characteristics; Flame spread = passed, ASTM E84
Smoke development = Passed (UL 723)
Nominal density 80 kg/m3 (5.0 lb/ft3) EN 1602

Water leachable Conforms to the stainless steel corrosion specification

ASTM C795
chloride content as per ASTM test methods C 692 and C 871
< 1 kg/m2 EN 1609
Water absorption Water vapour absorption (Vapor sorption) ± 0.02% vol ASTM C1104/
C1104M
Water vapour diffusion resistance μ=1 EN 14303
Air Flow Resistivity > 40 kPa.s/m2 EN 29053
Designation code MW EN 14303-T4(T3 if t<60)-ST(+)640-WS1 EN 14303

24

116121 RTI PRODUCTCATALOOG EXPORT.indd 24 27/11/12 11:34

 NEW
ProRox SL 960 NAME Old name: Rockwool 233

Thickness Length Width Packaging m2 per

mm mm mm m2/pack 40ft HC container*

25 1000 600 8.4 2470

30 1000 600 6.0 2016
40 1000 600 3.6 1663
50 1000 600 3.6 1210
60 1000 600 3.0 1008
70 1000 600 1.8 907
75 1000 600 2.4 806
80 1000 600 1.8 832
100 1000 600 1.8 605
120 1000 600 1.2 554

Boards are shrink-wrapped Applications Advantages

ProRox SL 960 is a strong and rigid slab and is Excellent thermal and acoustic insulation
*Approximate quantities. especially suitable for the thermal and acoustic Resistant to high temperatures
insulation of constructions up to intermediate
temperatures.

Compliance
ProRox SL 960 Slabs fully comply with the requirements
as set by internationally recognized standards like
EN14303, CINI 2.2.01 and ASTM C612 Type IA and IB.

Product properties
Performance Norms

T (°C) 50 100 150 200 250 300 350 400 500 EN 12667
Thermal conductivity
λ (W/mK) 0.039 0.045 0.052 0.060 0.071 0.081 0.094 0.107 0.140 ASTM C177

500°C (932°F) EN 14706

Maximum Service Temperature
600°C (1112°F) ASTM C411
EuroClass A1 EN 13501-1
Reaction to fire Surface burning characteristics; Flame spread = passed, ASTM E84
Smoke development = Passed (UL 723)
Nominal density 100 kg/m3 (6.2 lb/ft3) EN 1602

Water leachable Conforms to the stainless steel corrosion specification

ASTM C795
chloride content as per ASTM test methods C 692 and C 871
< 1 kg/m2 EN 1609
Water absorption Water vapour absorption (Vapor sorption) ± 0.02% vol ASTM C1104/
C1104M
Water vapour diffusion resistance μ=1 EN 14303
Air Flow Resistivity > 60 kPa.s/m2 EN 29053
Designation code MW EN 14303-T4(T3 if t<60)-ST(+)500-WS1 EN 14303

25

116121 RTI PRODUCTCATALOOG EXPORT.indd 25 27/11/12 11:34

 NEW
ProRox SL 970 NAME Old name: Rockwool HT 660 High temperature slab

Thickness Length Width Packaging m2 per

mm mm mm m2/pack 40ft HC container*

30 1000 600 6.0 2016

40 1000 600 4.8 1613
50 1000 600 3.6 1210
60 1000 600 3.0 1008
80 1000 600 1.8 832

Boards are shrink-wrapped Applications Advantages

ProRox SL970 is a strong and rigid stone wool slab, for Suitable for high temperature application
*Approximate quantities. the thermal and acoustic insulation of constructions Retains shape
where higher temperatures and light mechanical loads Available in a wide range of thicknesses
(e.g. vibrations) occur. Typical examples are ovens,
furnaces and exhaust ducts.

Compliance
ProRox SL 970 Slabs fully comply with the requirements
as set by internationally recognized standards like
EN14303, CINI 2.2.01 and ASTM C612 Type IA, IB, II, III,
IVA and IVB.

Product properties
Performance Norms

T (°C) 50 100 150 200 250 300 350 400 500 600 680 EN 12667
Thermal conductivity
λ (W/mK) 0.041 0.046 0.056 0.068 0.077 0.087 0.099 0.128 0.162 0.162 0.196 ASTM C177

680°C (1256°F) EN 14706

Maximum Service Temperature
750°C (1382°F) ASTM C411
EuroClass A1 EN 13501-1
Reaction to fire Surface burning characteristics; Flame spread = passed, ASTM E84
Smoke development = Passed (UL 723)
Nominal density 115 kg/m3 (7.2 lb/ft3) EN 1602
Chloride content < 10 ppm (AS - Quality) EN 13468
Water leachable Conforms to the stainless steel corrosion specification ASTM C795
chloride content as per ASTM test methods C 692 and C 871
< 10 mg/kg (ph-value neutral to slightly alkaline) ASTM C871
< 1 kg/m2 EN 1609
Water absorption Water vapour absorption (Vapor sorption) ± 0.02% vol ASTM C1104/
C1104M
Water vapour diffusion resistance μ=1 EN 14303
Air Flow Resistivity > 70 kPa.s/m 2
EN 29053
Designation code MW EN 14303-T4(T3 if t<60)-ST(+)680-WS1-CL10 EN 14303

26

116121 RTI PRODUCTCATALOOG EXPORT.indd 26 27/11/12 11:34

 NEW
ProRox SL 980 NAME Old name: Rockwool HT 700 Heavy duty slab

Thickness Length Width Packaging m2 per

mm mm mm m2/pack 40ft HC container*

30 1000 600 3.6 2117

40 1000 600 3.0 1638
50 1000 600 2.4 1310
60 1000 600 1.8 1058

*Approximate quantities. Applications Advantages

ProRox SL 980 is a strong and rigid stonewool slab, for Suitable for heavy duty applications which
the thermal and acoustic insulation of constructions are exposed to high temperatures and high
where higher demands are made on the temperature mechanical loads
resistance and mechanical loads of the insulation. Retains shape
Available in a wide range of thicknesses
Compliance
ProRox SL 980 Slabs fully comply with the requirements
as set by internationally recognized standards like
EN14303, CINI 2.2.01 and ASTM C612 Type IA, IB, II, III,
IVA and IVB.

Product properties
Performance Norms

T (°C) 50 100 150 200 250 300 350 400 500 600 700 EN 12667
Thermal conductivity
λ (W/mK) 0.040 0.044 0.049 0.055 0.062 0.069 0.077 0.086 0.106 0.130 0.158

700°C (1292°F) EN 14706

Maximum Service Temperature
750°C (1382°F) ASTM C411
EuroClass A1 EN 13501-1
Reaction to fire Surface burning characteristics; Flame spread = passed, ASTM E84
Smoke development = Passed (UL 723)
Nominal density 145 kg/m3 (9.1 lb/ft3) EN 1602

Water leachable Conforms to the stainless steel corrosion specification

ASTM C795
chloride content as per ASTM test methods C 692 and C 871
< 1 kg/m2 EN 1609
Water absorption Water vapour absorption (Vapor sorption) ± 0.02% vol ASTM C1104/
C1104M
Water vapour diffusion resistance μ=1 EN 14303
Air Flow Resistivity > 110 kPa.s/m2 EN 29053
Designation code MW EN 14303-T4(T3 if t<40)-ST(+)700-WS1 EN 14303

27

116121 RTI PRODUCTCATALOOG EXPORT.indd 27 27/11/12 11:34

 NEW
ProRox SL 540 NAME Old name: Rockwool 251.001

Thickness Length Width Packaging m2 per

mm mm mm m2/pack 40ft HC container*

30 1000 600 4.8 2117

40 1000 600 3.6 1663
50 1000 600 2.4 1301
60 1000 600 2.4 1058
65 1000 600 1.8 983

Boards are shrink-wrapped Applications Advantages

ProRox SL 540 is a highly pressure resistant stone wool Excellent thermal and acoustic insulation
*Approximate quantities. slab for the thermal and acoustic insulation of Resistant to high temperatures
constructions where high temperatures and mechanical Resistant to mechanical loads
loads (e.g. vibrations) occur.

Compliance
ProRox SL 540 Slabs comply with the requirements as
set by EN14303, CINI 2.2.01 and ASTM C612: type IA, IB,
II, III, IVA...

Product properties
Performance Norms

T (°C) 50 100 150 200 250 300 350 400 500 600 700 EN 12667
Thermal conductivity
λ (W/mK) 0.042 0.047 0.052 0.057 0.064 0.072 0.082 0.093 0.117 0.147 0.181

700°C (1292°F) EN 14706

Maximum Service Temperature
750°C (1382°F) ASTM C411
EuroClass A1 EN 13501-1
Reaction to fire Surface burning characteristics; Flame spread = passed, ASTM E84
Smoke development = Passed (UL 723)
Nominal density 160 kg/m3 (10.0 lb/ft3) EN 1602

Water leachable Conforms to the stainless steel corrosion specification

ASTM C795
chloride content as per ASTM test methods C 692 and C 871
< 1 kg/m2 EN 1609
Water absorption Water vapour absorption (Vapor sorption) ± 0.02% vol ASTM C1104/
C1104M
Water vapour diffusion resistance μ=1 EN 14303
Compression resistance > 25 kPa (at 10% deformation) EN 826
Air Flow Resistivity > 120 kPa.s/m2 EN 29053
Designation code MW EN 14303-T4(T3 if t<40)-ST(+)700-CS(10)25(if t≥50)-WS1 EN 14303

28

116121 RTI PRODUCTCATALOOG EXPORT.indd 28 27/11/12 11:34

 NEW
ProRox SL 560 NAME Old name: Rockwool 251

Thickness Length Width Packaging m2 per

mm mm mm m2/pack 40ft HC container*

40 1000 600 2.4 1613

50 1000 600 1.8 1285
60 1000 600 1.8 1058
80 1000 600 1.2 806
100 1000 600 1.2 655

Shrink-wrapped Applications Advantages

ProRox SL 560 is a highly pressure resistant stone wool Excellent thermal and acoustic insulation
*Approximate quantities. slab for the thermal and acoustic insulation of Resistant to high temperatures
constructions where high temperatures and mechanical Resistant to mechanical loads
loads (e.g. vibrations) occur.

Compliance
ProRox SL 560 Slabs comply with the requirements as
set by EN14303, CINI 2.2.01 and ASTM C612: type IA, IB,
II, III, IVA.

Product properties
Performance Norms

T (°C) 50 100 150 200 250 300 350 400 500 600 700 EN 12667
Thermal conductivity
λ (W/mK) 0.042 0.047 0.052 0.057 0.064 0.072 0.082 0.093 0.117 0.147 0.181

700°C (1292°F) EN 14706

Maximum Service Temperature
750°C (1382°F) ASTM C411
EuroClass A1 EN 13501-1
Reaction to fire Surface burning characteristics; Flame spread = passed, ASTM E84
Smoke development = Passed (UL 723)
Nominal density 175 kg/m3 (10.9 lb/ft3) EN 1602

Water leachable Conforms to the stainless steel corrosion specification

ASTM C795
chloride content as per ASTM test methods C 692 and C 871
< 1 kg/m2 EN 1609
Water absorption Water vapour absorption (Vapor sorption) ± 0.02% vol ASTM C1104/
C1104M
Water vapour diffusion resistance μ=1 EN 14303
Compression resistance > 30 kPa (at 10% deformation) EN 826
Air Flow Resistivity > 120 kPa.s/m2 EN 29053
Designation code MW EN 14303-T4(T3 if t<40)-ST(+)700-CS(10)30(if t≥50)-WS1 EN 14303

29

116121 RTI PRODUCTCATALOOG EXPORT.indd 29 27/11/12 11:34

 NEW
ProRox SL 580 NAME Old name: Rockwool CRS Compression resistant slab

Thickness Length Width Packaging m2 per

mm mm mm m2/pack 40ft HC container*

40 1000 600 3.0 1638

50 1000 600 2.4 1310
60 1000 600 2.4 1109
80 1000 600 1.8 832
100 1000 600 1.2 655

Shrink-wrapped Applications Advantages

ProRox SL 580 is a pressure resistant stone wool Resistant to foot traffic
*Approximate quantities. slab with high resistance to mechanical loads. The Available in a wide range of thicknesses
compression resistant slab is developed for the thermal
insulation of tank roofs subjected to pedestrian traffic,
and the thermal and acoustic insulation of  onstructions
subjected to a mechanical load.

Compliance
ProRox SL 580 Slabs fully comply with the requirements
as set by internationally recognized standards like
EN14303, CINI 2.2.01 and ASTM C612 Type IA, IB, II, III,
IVA and IVB.

Product properties
Performance Norms

T (°C) 50 100 150 200 250

Thermal conductivity EN 12667
λ (W/mK) 0.041 0.047 0.053 0.060 0.067

EN 14706
Maximum Service Temperature 250°C (482°F)
ASTM C411

EuroClass A1 EN 13501-1
Reaction to fire Surface burning characteristics; Flame spread = passed, ASTM E84 (UL 723)
Smoke development = Passed
Nominal density 150 kg/m3 (9.4 lb/ft3) EN 1602

Conforms to the stainless steel corrosion specification as

Water leachable chloride content ASTM C795
per ASTM test methods C 692 and C 871
< 1 kg/m2 EN 1609
Water absorption
Water vapour absorption (Vapor sorption) ± 0,02% vol ASTM C1104/C1104M
Water vapour diffusion resistance μ=1 EN 14303
Compression resistance > 50 kPa (at 10% deformation) EN 826
Air Flow Resistivity > 110 kPa.s/m2 EN 29053

Designation code MW EN 14303-T4(T3 if t<40)-ST(+)250-CS(10)50(if t≥50)-WS1 EN 14303

30

116121 RTI PRODUCTCATALOOG EXPORT.indd 30 27/11/12 11:34

 NEW
ProRox LF 970 NAME Old name: Rockwool Loose Fill Loose Fill

Product Packaging Kg/packaging Kg per

40 ft HC Container*

ProRox LF 970 (Rolls) Bag 15 5250

Packed into bags Applications Advantages

ProRox LF 970 ROCKWOOL Loose Fill is lightly bonded Ease of use
*Approximate quantities. impregnated stone wool. This product is especially Flexible application
suitable for thermal insulation and acoustic insulation
of joints and irregularly formed constructions.

Product properties
Performance Norms

T (°C) 50 100 150 200 250 300

Thermal conductivity EN 12667
λ (W/mK) 0.040 0.049 0.057 0.067 0.075 0.091

EN 14706
Maximum Service Temperature 680°C (1256°F)
ASTM C411

EuroClass A1 EN 13501-1
Reaction to fire Surface burning characteristics; Flame spread = passed, ASTM E84 (UL 723)
Smoke development = Passed
< 1 kg/m2 EN 1609
Water absorption
Water vapour absorption (Vapor sorption) ± 0,02% vol ASTM C1104/C1104M
Chloride content < 10 ppm EN 13468
AS quality Conforms to the stainless steel corrosion specification ASTM C795
(Water leachable chloride content) as per ASTM test methods C 692 and C 871
< 10 mg/kg (ph-value neutral to slightly alkaline) ASTM C871
Water vapour diffusion resistance μ=1 EN 12086

31

116121 RTI PRODUCTCATALOOG EXPORT.indd 31 27/11/12 11:34

 NEW
ProRox GR 903 NAME Old name: Rockwool Granulate Granulate wool

Product Packaging Kg/packaging Kg per

40 ft HC Container*

ProRox GR 903 Bag 20 12000

Lightly compressed and Applications Advantages

packed in bags ProRox GR 903 is a stone wool granulate with no Complies with the most stringent requirements
additives. The granulate is especially suitable for the for the insulation of cold boxes
*Approximate quantities. thermal insulation of cold boxes and air separation Chemically inert to steel
plants. Easy to remove for inspection purposes

Product properties
Performance Norms

T (°C) 20 -20 -60 -100 -140 -180

Thermal conductivity EN 12667
λ (W/mK) 0.039 0.033 0.027 0.022 0.018 0.015
Chloride content < 10 ppm EN 13468
Conforms to the stainless steel corrosion specification ASTM C795
AS quality
as per ASTM test methods C 692 and C 871
< 10 mg/kg (ph-value neutral to slightly alkaline) ASTM C871
EuroClass A1
EN 13501-1
Reacton to fire Surface burning characteristics; Flame spread = passed,
ASTM E84 (UL 723)
Smoke development = Passed

Installation guidelines
The guidelines for the use of granulate wool in cold
applications are given in the AGI Q 118 standard.
These guidelines are available on request. Please
ask your ROCKWOOL Technical Insulation sales
consultant.

32

116121 RTI PRODUCTCATALOOG EXPORT.indd 32 27/11/12 11:34

 Delivery and storage
ROCKWOOL Technical Insulation can accept no liability Advice
for any faults in installation and deficiencies. The ROCKWOOL Technical Insulation offers more than just
respective terms of general sale and delivery of the rapid delivery of the right product. ROCKWOOL can
ROCKWOOL bv, lodged with the Commercial Court also act as your partner during the design phase to
under number 13014428. A copy of these conditions help to resolve technical problems, such as providing
can be provided on request. advice for complex technical insulation calculations,
construction advice and help with drafting specifications.

Delivery service
ROCKWOOL Technical Insulation strives to make all
its products readily available. Delivery normally takes All the values given in this publication are
place from our dealers’ warehouses. However, direct ­indicative average values, subject to manufacturing
delivery by ROCKWOOL Technical Insulation to the site ­tolerances. ROCKWOOL Technical Insulation retains
of installation is also possible. To simplify construction the right to change product specifications at any
site logistics, deliveries using containers can be time without prior notice.
arranged. Contact your dealer for more information.

Packaging and storage

Where our goods are supplied packed, packaging is
included in the price. The polyethylene used in
packaging is free of chlorine and sulphur compounds,
and suitable for recycling. ROCKWOOL Technical
Insulation products must be stored in the original
packaging, protected from the weather and off the
ground.

33

116121 RTI PRODUCTCATALOOG EXPORT.indd 33 27/11/12 11:34

 Notes

34

116121 RTI PRODUCTCATALOOG EXPORT.indd 34 27/11/12 11:34

 35

116121 RTI PRODUCTCATALOOG EXPORT.indd 35 27/11/12 11:34

 ROCKWOOL Technical Insulation

RTI/10.12/1.0k/Exp 751
ROCKWOOL© Technical Insulation, an independent organisation All explanations correspond to our current range of knowledge
of the international ROCKWOOL Group, is the world wide and are therefore up-to-date. The examples of use outlined in
market leader in technical insulation. With our two product this document serve only to provide a better description and
lines, ProRox and SeaRox, we cover the whole industrial do not take special circumstances of specific cases into
market and marine & offshore industry, providing a full range account. ROCKWOOL Technical Insulation places great value
of products and systems for the thermal and firesafe upon continuous development of products, to the extent that
insulation of technical applications. Besides sustainable we too continuously work to improve our products without
products we offer reliable expert advice, from documentation prior notice. We therefore recommend that you use the most
to delivery and after sales service. Throughout the whole chain recent edition of our publications, as our wealth of experience
from specifier, through dealer to contractor and installer we and knowledge is always growing. Should you require related
aim to add value. We don’t just sell products, we supply information for your specific application or have any technical
solutions. It’s this total approach that makes us the ideal queries, please contact our sales department or visit our
choice for professionalism, innovation and trust. website www.rockwool-rti.com

The ROCKWOOL Group

The ROCKWOOL Group is the world’s leading supplier of Our more than 9,300 employees in more than 30 countries
innovative products and systems based on stone wool, cater for customers all over the world. The Group’s head office
improving the environment and the quality of life for millions is located close to Copenhagen. In 2011 the Group generated
of people. The Group is amongst the global leaders within the sales of EUR 1.85 billion. The company is listed on the
insulation industry. Together with other building-related NASDAQ OMX Nordic Exchange Copenhagen. The Group’s
products such as acoustic ceilings, cladding boards and our operations have a main presence in Europe and we are
consultancy business, the Group ensures energy efficient and expanding production, sales and service activities in North and
firesafe buildings with good acoustics and a comfortable South America and Asia. Together with a broad network of
indoor climate. We create green solutions for the horticultural business partners, this ensures that the Group’s products and
industry, inventive special fibres for industrial use, effective systems reach almost every corner of the globe. For more
insulation for the process industry and marine & offshore as information, please visit www.rockwool.com
well as noise and vibration systems for modern infrastructure.

ROCKWOOL Technical Insulation

Delfstoffenweg 2
6045 JH Roermond
The Netherlands
Tel. +31 (0) 475 35 38 35
Fax + 31 (0) 475 35 36 40
E-mail: [email protected]
www.rockwool-rti.com

ROCKWOOL Technical Insulation

is part of ROCKWOOL International A/S

ROCKWOOL Technical Insulation, ROCKWOOL, SeaRox and ProRox are registered trademarks

36 of ROCKWOOL International. ROCKWOOL Technical Insulation reserves the right to change

the information in this brochure without prior notice.

116121 RTI PRODUCTCATALOOG EXPORT.indd 36 27/11/12 11:34