Scribd Logo
Upload

Welcome to Scribd!

  • 169 views

    NF S 200 335 300HP - e Tefc Rev01

    Uploaded by

    Gibbs Per
    1. This document provides dimensional drawings and specifications for a fire pump set model NF-S-200-335 with an electric motor. 2. The pump is rated for 2000 gallons per minute at 8.9 bar and is powered by a 300HP motor. 3. Dimensional drawings show the layout and measurements of the pump, motor, base frame, and other components, along with installation notes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    NF S 200 335 300HP - e Tefc Rev01

    Uploaded by

    Gibbs Per
    169 views1 page
    1. This document provides dimensional drawings and specifications for a fire pump set model NF-S-200-335 with an electric motor. 2. The pump is rated for 2000 gallons per minute at 8.9 bar and is powered by a 300HP motor. 3. Dimensional drawings show the layout and measurements of the pump, motor, base frame, and other components, along with installation notes.

    Original Title

    NF-S-200-335-300HP_E-TEFC-REV01

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. This document provides dimensional drawings and specifications for a fire pump set model NF-S-200-335 with an electric motor. 2. The pump is rated for 2000 gallons per minute at 8.9 bar and is powered by a 300HP motor. 3. Dimensional drawings show the layout and measurements of the pump, motor, base frame, and other components, along with installation notes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    169 views1 page

    NF S 200 335 300HP - e Tefc Rev01

    Uploaded by

    Gibbs Per
    1. This document provides dimensional drawings and specifications for a fire pump set model NF-S-200-335 with an electric motor. 2. The pump is rated for 2000 gallons per minute at 8.9 bar and is powered by a 300HP motor. 3. Dimensional drawings show the layout and measurements of the pump, motor, base frame, and other components, along with installation notes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    PUMP - NF-S-200-335 DIMENSIONS

    NIDEC- A B C D E F G H S J K L M N O
    MOTOR-TEFC
    APPROXIMATE WEIGHT
    300HP 2300 330 560 150 700 625 200 1900 390 75 37.5 385 465 1085 1125
    DESCRIPTION MODEL Kgs.
    PUMP NF-S-200-335 390
    MOTOR 300HP 1350
    A FRAME 105
    COUPLING RFC 18 15
    TOTAL 1860
    DISCHARGE
    12 HOLES Ø25.4 ON PCD 330.2 12 HOLES Ø25.4 ON PCD 362
    DISCHARGE FLANGE SUCTION FLANGE
    ANSI 250# FF ANSI 125# FF
    A
    FRONT VIEW VIEW A-A
    NOTES:
    1. ALL DIMENSIONS ARE IN MM, ±20MM.
    Ø18 (4 Nos.) 2. SUCTION AND DISCHARGE FLANGES, ASME B16.1
    STANDARDS, RAISED FACE.
    3. PUMP ROTATION CLOCKWISE DIRECTION FROM
    PUMP SHAFT END
    4. BASE FRAME NON DRIP RIM.
    5. DIMENSIONS MAY BE VARY DIFFERENT MAKE MOTORS
    OR ENCLOSURE.
    6. PUMP SET INSTALL AS PER NFPA-20 GUIDLINE.
    7. MAKE SURE THE CONCRETE FOUNDATION HAS SET BEFORE
    MOUNTING THE PUMPSET. THE SURFACE OF THE FOUNDATION
    MUST BE COMPLETELY HORIZONTAL AND PERFECTLY FLAT.
    BASE FRAME
    FIRE PUMP SET
    NF-S-200-335 DIMENSIONAL DRAWING
    WITH ELECTRIC MOTOR
    PASSION TO PROTECT
    NAFFCO MEMBERS OF:
    41113786
    NATIONAL FIRE FIGHTING MANUFACTURING CO. LTD.
    2000GPM @ 8.9BAR NFPA
    130004

    You might also like