Scribd
Upload
253 views

VLE Calculation Using Excel Spreadsheet

This document discusses calculating vapor-liquid equilibrium (VLE) using an Excel spreadsheet. It provides an example problem using flow rates and K-values for a mixture of hydrocarbons at specific temperature and pressure. The document instructs the user to set up a spreadsheet with the necessary calculations based on equations provided. It describes using Goal Seek to iteratively determine the fraction of the feed that is vapor by making the Rachford-Rice equation equal to zero. Once the vapor fraction is determined, the mole fractions in each phase can be calculated.

Uploaded by

Albert S
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
253 views

VLE Calculation Using Excel Spreadsheet

This document discusses calculating vapor-liquid equilibrium (VLE) using an Excel spreadsheet. It provides an example problem using flow rates and K-values for a mixture of hydrocarbons at specific temperature and pressure. The document instructs the user to set up a spreadsheet with the necessary calculations based on equations provided. It describes using Goal Seek to iteratively determine the fraction of the feed that is vapor by making the Rachford-Rice equation equal to zero. Once the vapor fraction is determined, the mole fractions in each phase can be calculated.

Uploaded by

Albert S
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

VLE

 Calculation  using  Excel  Spreadsheet    

Suppose you have a mixture of hydrocarbons in the inlet stream. You want to find the fraction of
the stream that is vapor and the mole fraction of each chemical in the vapor and liquid streams.
Table 1 shows the flow rates and K-values at 180 oF and 70 psia, using a basis of one mole per
unit of time.

Table 1. Mole Fractions and K-values for Vapor–Liquid Example

To solve this problem, prepare the spreadsheet as shown in Table 2

Table 2. Spreadsheet Calculation

Step 1 ‘Term1’ is the numerator in Eq.

and ‘term2’ is the denominator, and these are calculated in columns D and E.

Step 2 The ratios of term1 over term2 are calculated and put into column F; this column is
summed in cell F9, which represents the equation

Step 3 You can then use Goal Seek to make the Rachford–Rice equation (cell F9) zero by
changing the fraction of the feed that is vapor (cell D1), giving the result shown. Once you
find the fraction vapor, the mole fractions in the two phases are easy to calculate using
equations

and

Reference:
Bruce A. Finlayson, Introduction to Chemical Engineering Computing, John Wiley
and Sons, 2006 Edition, pp 26-29.

You might also like