Scribd Logo
Upload

Welcome to Scribd!

  • 106 views

    Secco Hd5401Aa: High Density Polyethylene

    Uploaded by

    Darko Kuro
    HD5401AA is a hexene high density polyethylene resin suitable for producing various blown molding containers from 1-60L through blown molding processes. It has a broad molecular weight distribution that provides an outstanding balance of stiffness, toughness, and environmental stress cracking resistance. Typical property values include a density of 0.951 g/cm3, tensile strength of 28 MPa, and Charpy impact strength of 22 kJ/m2. The resin complies with various food safety and RoHS standards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Secco Hd5401Aa: High Density Polyethylene

    Uploaded by

    Darko Kuro
    106 views2 pages
    HD5401AA is a hexene high density polyethylene resin suitable for producing various blown molding containers from 1-60L through blown molding processes. It has a broad molecular weight distribution that provides an outstanding balance of stiffness, toughness, and environmental stress cracking resistance. Typical property values include a density of 0.951 g/cm3, tensile strength of 28 MPa, and Charpy impact strength of 22 kJ/m2. The resin complies with various food safety and RoHS standards.

    Original Title

    HD5401AA

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    HD5401AA is a hexene high density polyethylene resin suitable for producing various blown molding containers from 1-60L through blown molding processes. It has a broad molecular weight distribution that provides an outstanding balance of stiffness, toughness, and environmental stress cracking resistance. Typical property values include a density of 0.951 g/cm3, tensile strength of 28 MPa, and Charpy impact strength of 22 kJ/m2. The resin complies with various food safety and RoHS standards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    106 views2 pages

    Secco Hd5401Aa: High Density Polyethylene

    Uploaded by

    Darko Kuro
    HD5401AA is a hexene high density polyethylene resin suitable for producing various blown molding containers from 1-60L through blown molding processes. It has a broad molecular weight distribution that provides an outstanding balance of stiffness, toughness, and environmental stress cracking resistance. Typical property values include a density of 0.951 g/cm3, tensile strength of 28 MPa, and Charpy impact strength of 22 kJ/m2. The resin complies with various food safety and RoHS standards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Product Data Sheet

    SECCO HD5401AA
    High Density Polyethylene

    Product Description
    HD5401AA is a hexene high density polyethylene resin with a broad molecular weight distribution, outstanding balance
    of stiffness, toughness and environmental stress cracking resistance, suitable for producing various blown molding
    containers of medium volume.

    Typical Applications
    Blown Molding: Containers (1-60L) for various chemicals (like pesticide, chemical reagent), food (like liquor, condiment,
    food additives) and daily chemicals

    Typical Property Values

    Properties Typical values Units Test methods


    Physical Properties
    Melt Flow Rate (190℃/21.6 kg) 9.5 g/10min GB/T 3682
    3
    Density (non-annealed) 0.951 g/cm SECCO-LAB 0310

    Melting Temperature (DSC) 132 ℃ GB/T 19466.3

    Mechanical Properties
    Tensile Strength at Yield 28 MPa GB/T 1040.2

    Tensile Elongation at Break 750 % GB/T 1040.2

    Flexural Modulus 1300 MPa GB/T 9341


    2
    Charpy Impact Strength, notched (23℃) 22 kJ/m GB/T 1043.1

    Environmental Stress Cracking Resistance


    >300 hr GB/T 1842
    (Method B, 10% Igepal，F50)

    Appearance Performances
    Whiteness 68 % GB/T 2913

    Thermal Properties
    Heat Deflection Temperature (0.45 MPa) 71 ℃ GB/T 1634.2

    Vicat Softening Point (A50) 125 ℃ GB/T 1633

    Notes
    * ESCR value basically depends on the test method
    * These are typical properties only and should not be construed as specifications
    * Recommended processing temperature: 180 ~ 210℃

    The information included herein, such as data, recommended application, and product characters, is believed to be reliable on the data compiled. The user is solely
    responsible for all determinations regarding any use of the product in its special territories, and ensure the disposal practices are in compliance with applicable laws
    and other governmental regulations. We expressly disclaim liability for whatsoever arising from the use of this information, or application or processing of the product
    described in this document.
    Product Compliance
    HD5401AA complies with GB 4806.6-2016 National Food Safety Standard-Plastic Resin used in Food-contact, FDA
    regulation 21 CFR 177.1520(c) 2.1 and the RoHS Directive 2011/65/EU. Additives those do not comply with national
    regulations, such as phthalates, are not intentionally used in HD5401AA. However, the customer is still responsible for
    determining whether the fabricated product is in compliance with applicable laws and regulations.

    Storage
    The storage area for polyethylene resin should be dry, and preferable to normal temperature. The resin must be
    protected from direct sunlight, and heat resource. SECCO would not give warranty to bad storage conditions which
    may lead to color change, bad odor and inadequate product performance. It is generally recommended to convert all
    materials latest within 6 months from the date of delivery.

    Safety and Material Handling


    SECCO polyethylene resin has a very low degree of toxicity under normal conditions of use. For more detailed
    information, please contact your SECCO representative or the local suppliers to get the Material Safety Data Sheet
    (MSDS) for High Density Polyethylene.

    For additional technical and sales assistance, please contact


    Shanghai SECCO Petrochemical Co., Ltd
    Address: 30F, A Building, Fareast International Plaza, No. 319, Xianxia Rd., Changning District, Shanghai
    200050, P.R. China
    Tel: +86(0)21 5257 4688 Fax: +86(0)21 6209 7070 Website: www.secco.com.cn

    The information included herein, such as data, recommended application, and product characters, is believed to be reliable on the data compiled. The user is solely
    responsible for all determinations regarding any use of the product in its special territories, and ensure the disposal practices are in compliance with applicable laws
    and other governmental regulations. We expressly disclaim liability for whatsoever arising from the use of this information, or application or processing of the product
    described in this document.

    You might also like