0% found this document useful (0 votes)
89 views4 pages

Raspberry Pi Based Solar Street Light: (IEEE-2015)

The document describes several Raspberry Pi based projects including a solar street light that automatically controls light intensity, a programmable sequential switching system for industrial loads, motor speed control using a keyboard interface, and an automatic light intensity control system for street lights that reduces intensity at night to conserve energy. The projects utilize technologies like photovoltaic cells, charge controllers, pulse width modulation, and motor drivers.

Uploaded by

Bharathi Raju
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
89 views4 pages

Raspberry Pi Based Solar Street Light: (IEEE-2015)

The document describes several Raspberry Pi based projects including a solar street light that automatically controls light intensity, a programmable sequential switching system for industrial loads, motor speed control using a keyboard interface, and an automatic light intensity control system for street lights that reduces intensity at night to conserve energy. The projects utilize technologies like photovoltaic cells, charge controllers, pulse width modulation, and motor drivers.

Uploaded by

Bharathi Raju
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

1.

Minimum-Time Trajectory Planning and Control of a Pick-and-Place Five-Bar Parallel


Robot (IEEE-2015)
2. Autonomous Pose Detection and Alignment of Suction Modules of a Biped Wall-Climbing
Robot. (IEEE-2015)
3. Design of a Direct-Driven Linear Actuator for a High-Speed Quadruped Robot,
Cheetaroid-I. (IEEE-2015)
4. Manipulator Design and Operation of a Six-Degree-of-Freedom Handheld Tremor-
Canceling Microsurgical Instrument. (IEEE-2015)
5. Cooperative Path Planning for Target Tracking in Urban Environments Using Unmanned
Air and Ground Vehicles. (IEEE-2015)
6. Vehicle Color Classification Under Different Lighting Conditions Through Color
Correction. (IEEE-2015)
7. A Low-Power Wireless Sensor for Online Ambient Monitoring. (IEEE-2015)
8. Implementing Intelligent Traffic Control System for Congestion Control, Ambulance
Clearance, and Stolen Vehicle Detection. (IEEE-2015)
9. Improved Ultrasonic Phased Array Based on Encoded Transmissions for Obstacle
Detection. (IEEE-2015)
10. A Zigbee-Based Animal Health Monitoring System. (IEEE-2015)
11. WSN-Based Smart Sensors and Actuator for Power Management in Intelligent Buildings.
(IEEE-2015)
12. Long-Range Magnetic Tracking System. (IEEE-2015)
13. A Phase-Based Technique for Localization of UHF-RFID Tags Moving on a Conveyor
Belt: Performance Analysis and Test-Case Measurements. (IEEE-2015)
14. Embedded Linux based Finger print security access control system using Raspberry Pi/
Banana Pi processor.
15. Raspberry pi based liquid flow monitoring and control. (IEEE-2014)

Raspberry Pi based Solar Street Light


This project is intended for auto intensity controlling of solar LED street lights using solar power
from PV cells interfaced to a Raspberry Pi. Day by day solar power awareness is increasing. The
awareness of solar power is increasing, and a lot of people and establishments are choosing
solar power. PV cells are used for charging batteries by changing the daylight into electricity. A
charge controller circuit is employed to regulate the charging.
Raspberry Pi based Solar Street Light Project Kit by Edgefxkits.com
The street light intensity is needed to be kept high throughout the peak hours. Because, the
traffic on the roads decreases gradually in late nights, the intensity can be decreased gradually
till morning to conserve energy. Therefore, automatically the solar LED street lights turn ON at
the dusk and then turns OFF at the dawn and every day this process repeats daily

HID lamps are used in the urban street lights and these are based on the principle of gas
discharge. Therefore, the light intensity isn’t controllable by any voltage reduction method
because the discharge path is broken. LEDs are the longer term of lighting, attributed to their low
energy consumption and long life. These lights are quick replacement standard lights world wide.
White LEDs will replace the HID lamps whenever intensity control is feasible by PWM( Pulse
Width Modulation

The intensity of light helps in saving energy throughout late nights, whereas traffic density on the
streets is low. A Raspberry Pi board is engaged to supply totally different intensities at the
various times of night victimization PWM technique, for energy conserving for star based system,
employing a charge controller for battery charging, overload and deep discharge protection.

Raspberry Pi based Programmable Sequential Switching


This project is used to operate industrial loads with a user PLC for consecutive operation with the
Raspberry Pi board. This operation is usually used for the respective nature of work.

PLCs is employed in industrial applications for easy operations like serial switching of loads. The
proposed system uses a Raspberry Pi and the development of this application needs the
formation of the program via i/p key buttons. In industries, there are several tasks are
administered which requires some recurrent operation in various orders
Raspberry Pi based Programmable Sequential Switching Project Kit by
Edgefxkits.com
For instance, particular loads need to be turned ON/OFF in a particular time intervals. So as to
attain this, the Raspberry Pi is programmed in such a way that the different loads can be
operated in 3 modes such as set, auto & manual mode. In set mode, through timers, the
machinery works based on i/p time arranged by the user whenever as in auto mode it works on
default time settings and eventually in the manual mode, it functions whereas individual key
buttons are pushed depending on the user requirement. All the status and modes are displayed
on a TV or PC.

Thus, tasks performed by costly PLCs will currently be achieved by employing a Raspberry Pi
board creating the device price effective. In the future, this project is often increased by
interfacing it with a GSM device wherever by sending an SMS to the system we will choose the
mode and timing remotely.

Raspberry Pi based Motor Speed Control


The proposed system uses a Raspberry Pi to control the speed of a DC motor. The speed of the
motor is directly proportional to the voltage applied across its terminals. Therefore, if the voltage
across the motor terminals is different, then the speed of the motor can also be different.

Raspberry Pi based Motor Speed Control Project Kit by Edgefxkits.com


In this project, a keyboard is interfaced to the board and it works as an input. Here, the keyboard
is used to control the speed of the motor. PWM is produced at the o/p by the board according to
the program. Depending on the duty cycle, the average current flowing or the average voltage
given through the motor will change so, the motor speed will change. The pulse width modulation
signals can be received by interfacing a motor driver to the board. A motor driver IC is interfaced
to the board for receiving PWM signals and sending preferred o/p for speed control of a small DC
motor.

Raspberry Pi based Auto Intensity Control


This project uses LEDs in the place of HID lamps in the street lights. A Raspberry Pi is used to
control the light intensity by developing PWM signals which drive a MOSFET to turn the LEDs
according to the required operation.

A bunch of LEDs are used to make a street light. The Raspberry Pi board comprises
programmable instructions, that controls the light intensity based on the pulse width modulation
signals produced. The light intensity can be kept high throughout the peak hours. Hen the traffic
on the roads decreases slowly, then light intensity also decreases till morning. Finally, it
shutdowns at 6 am and again continues at 6pm in the evening.

Raspberry Pi based Auto Intensity Control Project Kit by Edgefxkits.com


This is all about list of best raspberry pi project ideas which can be used in various categories
like enclosure, artistic, educational and utility. We hope that by giving this information, we have
been successful to offer you the best list. Furthermore, any queries regarding best raspberry pi
based electronics projects give your suggestions in the comments section given below.

kjbhkb

You might also like