6N137, VO2601, VO2611, VO2630, VO2631, VO4661

www.vishay.com
Vishay Semiconductors
High Speed Optocoupler, Single and Dual, 10 MBd
Single channel FEATURES
NC 1 8 V • Choice of CMR performance of 15 kV/μs,
CC
5 kV/μs, and 1000 V/μs
A 2 7 V
E
• High speed: 10 MBd typical
C 3 6 VO
• +5 V CMOS compatibility
NC 4 5 GND
• Pure tin leads
6N137, VO2601, VO2611 • Guaranteed AC and DC performance over
Dual channel temperature
A1 1 8 VCC • Meets IEC 60068-2-42 (SO2) and IEC 60068-2-43 (H2S)
requirements
C1 2 7 V
O1
• Low input current capability of 5 mA
C2 3 6 V
O2 • Material categorization: for definitions of compliance
A2 4 5 GND please see www.vishay.com/doc?99912
VO2630, VO2631, VO4661
APPLICATIONS
• Microprocessor system interface
• PLC, ATE input / output isolation
LINKS TO ADDITIONAL RESOURCES
• Computer peripheral interface
3D 3D • Digital fieldbus isolation: CC-link, DeviceNet, profibus,
3D Models Design Tools Related
Documents SDS
• High speed A/D and D/A conversion
DESCRIPTION
• AC plasma display panel level shifting
The 6N137, VO2601, and VO2611 are single channel
10 MBd optocouplers utilizing a high efficient input LED • Multiplexed data transmission
coupled with an integrated optical photodiode IC detector. • Digital control power supply
The detector has an open drain NMOS-transistor output, • Ground loop elimination, noise isolation
providing less leakage compared to an open collector
Schottky clamped transistor output. The VO2630, VO2631, AGENCY APPROVALS
and VO4661 are dual channel 10 MBd optocouplers. For the • UL1577
single channel type, an enable function on pin 7 allows the
• cUL
detector to be strobed. The internal shield provides a
guaranteed common mode transient immunity of 5 kV/μs for • DIN EN 60747-5-5 (VDE 0884-5) available with option 1
the VO2601 and VO2631 and 15 kV/μs for the VO2611 and • CQC GB8898-2011
VO4661. The use of a 0.1 μF bypass capacitor connected • CQC GB4943.1-2011
between pin 5 and 8 is recommended.

ORDERING INFORMATION
DIP-8 Option 6

V O 2 6 0 1 - X 0 # # T
7.62 mm 10.16 mm

Option 7 Option 9
PART NUMBER PACKAGE OPTION TAPE
AND
REEL > 0.1 mm
> 0.7 mm

AGENCY CERTIFIED / CHANNELS 1 CHANNELS 2

PACKAGE CMR (V/μs) CMR (V/μs)
UL, cUL, CQC 1000 5000 15 000 1000 5000 15 000
DIP-8 6N137 VO2601 VO2611 VO2630 VO2631 VO4661
DIP-8, 400 mil (option 6) 6N137-X006 VO2601-X006 VO2611-X006 - VO2631-X006 VO4661-X006
SMD-8 (option 7) 6N137-X007T VO2601-X007T VO2611-X007T VO2630-X007T VO2631-X007T VO4661-X007T
SMD-8 (option 9) 6N137-X009T - - VO2630-X009T - -
VDE, UL, cUL, CQC 1000 5000 15 000 1000 5000 15 000
DIP-8, 400 mil (option 6) - - VO2611-X016 - - -
SMD-8 (option 7) - VO2601-X017T VO2611-X017T - VO2631-X017T -

Rev. 2.1, 15-Jan-2021 1 Document Number: 84732

For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 6N137, VO2601, VO2611, VO2630, VO2631, VO4661
www.vishay.com
Vishay Semiconductors

TRUTH TABLE (positive logic)

LED ENABLE OUTPUT
On H L
Off H H
On L H
Off L H
On NC L
Off NC H

ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)

PARAMETER CONDITIONS SYMBOL VALUE UNIT
INPUT
Average forward current (single channel) IF 20 mA
Average forward current
IF 15 mA
(per channel for dual channel)
Reverse input voltage VR 5 V
Enable input voltage VE VCC + 0.5 V V
Enable input current IE 5 mA
Surge current t = 100 μs IFSM 200 mA
Output power dissipation
Pdiss 35 mW
(single channel)
Output power dissipation (per channel for
Pdiss 25 mW
dual channel)
OUTPUT
Supply voltage 1 min maximum VCC 7 V
Output current IO 50 mA
Output voltage VO 7 V
Output power dissipation (single channel) Pdiss 85 mW
Output power dissipation (per channel for
Pdiss 60 mW
dual channel)
COUPLER
Storage temperature Tstg -55 to +150 °C
Operating temperature Tamb -40 to +100 °C
Lead solder temperature for 10 s 260 °C
Solder reflow temperature 260 °C
Note
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability

Rev. 2.1, 15-Jan-2021 2 Document Number: 84732

For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 6N137, VO2601, VO2611, VO2630, VO2631, VO4661
www.vishay.com
Vishay Semiconductors
Ptot - Total Power Dissipation (mW)

100 30
Output

IF - Forward Current (mA)

80 25

20
60
15
40
Input
10

20
5

0 0
0 25 50 75 100 125 0 25 50 75 100 125
Tamb - Ambient Temperature (°C) Tamb - Ambient Temperature (°C)

Fig. 1 - Total Power Dissipation vs. Ambient Temperature Fig. 3 - Forward Current vs. Ambient Temperature
(single channel) (single channel)
Ptot - Total Power Dissipation (mW)

100 30

IF - Forward Current (mA)

80 25

Output 20
60
15
40
Input
10

20
5

0 0
0 25 50 75 100 125 0 25 50 75 100 125
Tamb - Ambient Temperature (°C) Tamb - Ambient Temperature (°C)

Fig. 2 - Total Power Dissipation vs. Ambient Temperature Fig. 4 - Forward Current vs. Ambient Temperature
(dual channel) (dual channel)

RECOMMENDED OPERATING CONDITIONS

PARAMETER TEST CONDITION SYMBOL MIN. MAX. UNIT
Operating temperature Tamb -40 100 °C
Supply voltage VCC 4.5 5.5 V
Input current low level IFL 0 250 μA
Input current high level IFH 5 15 mA
Logic high enable voltage VEH 2 VCC V
Logic low enable voltage VEL 0 0.8 V
Output pull up resistor RL 330 4K Ω
Fanout RL = 1 kΩ N - 5 -

Rev. 2.1, 15-Jan-2021 3 Document Number: 84732

For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 6N137, VO2601, VO2611, VO2630, VO2631, VO4661
www.vishay.com
Vishay Semiconductors

ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
INPUT
Input forward voltage IF = 10 mA VF 1.1 1.4 1.7 V
Reverse current VR = 5 V IR - 0.01 10 μA
Input capacitance f = 1 MHz, VF = 0 V CI - 55 - pF
OUTPUT
High level supply current VE = 0.5 V, IF = 0 mA ICCH - 4.1 7 mA
(single channel) VE = VCC, IF = 0 mA ICCH - 3.3 6 mA
High level supply current
IF = 0 mA ICCH - 6.5 12 mA
(dual channel)
Low level supply current VE = 0.5 V, IF = 10 mA ICCL - 4 7 mA
(single channel) VE = VCC, IF = 10 mA ICCL - 3.3 6 mA
Low level supply current
IF = 10 mA ICCL - 6.5 12 mA
(dual channel)
High level output current VE = 2 V, VCC = 5.5 V, IF = 250 μA IOH - 0.002 1 μA
VE = 2 V, IF = 5 mA,
Low level output voltage VOL - 0.2 0.6 V
IOL (sinking) = 13 mA
VE = 2 V, VCC = 5.5 V,
Input threshold current ITH - 2.4 5 mA
IOL (sinking) = 13 mA
High level enable current VE = 2 V IEH - -0.6 -1.6 mA
Low level enable current VE = 0.5 V IEL - -0.8 -1.6 mA
High level enable voltage VEH 2 - - V
Low level enable voltage VEL - - 0.8 V
Note
• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements

SWITCHING CHARACTERISTICS
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Propagation delay time to high tPLH 20 48 75 (1) ns
RL = 350 Ω, CL = 15 pF
output level tPLH - - 100 ns
Propagation delay time to low tPHL 25 50 75 (1) ns
RL = 350 Ω, CL = 15 pF
output level tPHL - - 100 ns
Pulse width disortion RL = 350 Ω, CL = 15 pF |tPHL - tPLH| - 2.9 35 ns
Propagation delay skew RL = 350 Ω, CL = 15 pF tPSK - 8 40 ns
Output rise time (10 % to 90 %) RL = 350 Ω, CL = 15 pF tr - 23 - ns
Output fall time (90 % to 10 %) RL = 350 Ω, CL = 15 pF tf - 7 - ns
Propagation delay time of RL = 350 Ω, CL = 15 pF,
tELH - 12 - ns
enable from VEH to VEL VEL = 0 V, VEH = 3 V
Propagation delay time of RL = 350 Ω, CL = 15 pF,
tEHL - 11 - ns
enable from VEL to VEH VEL = 0 V, VEH = 3 V
Notes
• Over recommended temperature (Tamb = -40 °C to +100 °C), VCC = 5 V, IF = 7.5 mA unless otherwise specified. All typicals at Tamb = 25 °C,
VCC = 5 V
(1) 75 ns applies to the 6N137 only, a JEDEC® registered specification

Rev. 2.1, 15-Jan-2021 4 Document Number: 84732

For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 6N137, VO2601, VO2611, VO2630, VO2631, VO4661
www.vishay.com
Vishay Semiconductors

VCC
Single channel
Pulse gen. 1 VCC 8 RL
Zo = 50  IF IF = 7.5 mA
t f = t r = 5 ns VE
2 7 Input IF IF = 3.75 mA
0.1 µF
VOUT bypass Output VO 0 mA
Input IF monitoring
3 6 VOH
monitoring node Output VO 1.5 V
node
RM 4 5 C L = 15 pF VOL
GND
t PHL t PLH

The probe and Jig capacitances are included in C L 18964-2

Fig. 5 - Single Channel Test Circuit for tPLH, tPHL, tr and tf

Pulse gen.
Z0 = 50 Ω
tf = tr = 5 ns VCC
IF Dual channel
1 VCC 8
RL Output VO
Input 2 7 monitoring
monitoring
0.1 µF node
node
3 6 bypass
RM CL= 15 pF
4 5
GND
18963-5

Fig. 6 - Dual Channel Test Circuit for tPLH, tPHL, tr and tf

Pulse gen. Input VE

Zo = 50  monitoring node VCC
t f = t r = 5 ns Single channel

1 VCC 8 RL
3V
7.5 mA VE Output VO Input VE 1.5 V
2 7 0.1 µF monitoring
IF VOUT tEHL
bypass node
3 6 tELH
CL = 15 pF Output VO
4 5 1.5 V
GND

The probe and Jig capacitances are included in CL 18975-2

Fig. 7 - Single Channel Test Circuit for tEHL, and tELH

Rev. 2.1, 15-Jan-2021 5 Document Number: 84732

For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 6N137, VO2601, VO2611, VO2630, VO2631, VO4661
www.vishay.com
Vishay Semiconductors

COMMON MODE TRANSIENT IMMUNITY (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
|VCM| = 10 V, VCC = 5 V, IF = 0 mA,
|CMH| 1000 - - V/μs
VO(min.) = 2 V, RL = 350 Ω, Tamb = 25 °C (1)
|VCM| = 50 V, VCC = 5 V, IF = 0 mA,
|CMH| 5000 10 000 - V/μs
VO(min.) = 2 V, RL = 350 Ω, Tamb = 25 °C (2)
|VCM| = 1 kV, VCC = 5 V, IF = 0 mA,
|CMH| 15 000 25 000 - V/μs
VO(min.) = 2 V, RL = 350 Ω, Tamb = 25 °C (3)
Common mode transient immunity
|VCM| = 10 V, VCC = 5 V, IF = 7.5 mA,
|CML| 1000 - - V/μs
VO(max.) = 0.8 V, RL = 350 Ω, Tamb = 25 °C (1)
|VCM| = 50 V, VCC = 5 V, IF = 7.5 mA,
|CML| 5000 10 000 - V/μs
VO(max.) = 0.8 V, RL = 350 Ω, Tamb = 25 °C (2)
|VCM| = 1 kV, VCC = 5 V, IF = 7.5 mA,
|CML| 15 000 25 000 - V/μs
VO(max.) = 0.8 V, RL = 350 Ω, Tamb = 25 °C (3)
Notes
(1) For 6N137 and VO2630
(2) For VO2601 and VO2631
(3) For VO2611 and VO4661

VCC
IF Single channel

1 VCC 8 RL VCM (peak)

B VCM 0 V
VE Output VO
2 7 0.1 µF monitoring Switch AT A: IF = 0 mA
A VOUT bypass VO 5 V CMH
node
VFF 3 6 VO (min.)
Switch AT A: IF = 7.5 mA
4 5 VO (max.)
GND CML
VO 0.5 V
VCM
+ -
Pulse generator
ZO = 50 Ω 18976-2

Fig. 8 - Single Channel Test Circuit for Common Mode Transient Immunity

IF

Dual channel
B VCC
1 VCC 8
A RL
Output VO
2 7
monitoring
0.1 µF node
VFF 3 6 bypass

4 5
GND
VCM
+ -
Pulse generator
18977-1 Z O = 50 Ω

Fig. 9 - Dual Channel Test Circuit for Common Mode Transient Immunity

Rev. 2.1, 15-Jan-2021 6 Document Number: 84732

For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 6N137, VO2601, VO2611, VO2630, VO2631, VO4661
www.vishay.com
Vishay Semiconductors

SAFETY AND INSULATION RATINGS

PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Climatic classification According to IEC 68 part 1 40 / 100 / 21
Pollution degree According to DIN VDE 0109 2
Comparative tracking index Insulation group IIIa CTI 175
Maximum rated withstanding isolation voltage According to UL1577, t = 1 min VISO 5300 VRMS
Maximum transient isolation voltage According to DIN EN 60747-5-5 VIOTM 8000 Vpeak
Maximum repetitive peak isolation voltage According to DIN EN 60747-5-5 VIORM 890 Vpeak
Tamb = 25 °C, VIO = 500 V RIO ≥ 1012 Ω
Isolation resistance
Tamb = 100 °C, VIO = 500 V RIO ≥ 1011 Ω
Output safety power PSO 500 mW
Input safety current ISI 300 mA
Input safety temperature TS 175 °C
Creepage distance ≥7 mm
DIP-8
Clearance distance ≥7 mm
Creepage distance ≥8 mm
DIP-8, 400 mil (option 6)
Clearance distance ≥8 mm
Creepage distance ≥8 mm
SMD-8 (option 7)
Clearance distance ≥8 mm
Creepage distance ≥8 mm
SMD-8 (option 9)
Clearance distance ≥8 mm
Insulation thickness DTI ≥ 0.4 mm
Note
• As per IEC 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with
the safety ratings shall be ensured by means of protective circuits

TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

1.7 1.60
1.55
1.6
VF - Forward Voltage (V)

VF - Forward Voltage (V)

1.50
1.5 1.45
1.4 IF = 20 mA 1.40
1.35
1.3
1.30
IF = 10 mA
1.2 1.25
IF = 1 mA 1.20
1.1
1.15
1.0 1.10
-40 -20 0 20 40 60 80 100 0 5 10 15 20 25 30 35 40 45 50
Tamb - Ambient Temperature (°C) 17611 IF - Forward Current (mA)

Fig. 10 - Forward Voltage vs. Ambient Temperature Fig. 11 - Forward Voltage vs. Forward Current

Rev. 2.1, 15-Jan-2021 7 Document Number: 84732

For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 6N137, VO2601, VO2611, VO2630, VO2631, VO4661
www.vishay.com
Vishay Semiconductors

ITH - Input Threshold On Current (µA)

7 2.8

6
IR - Reverse Current (nA)

2.7

5 2.6
RL = 350 Ω
4 2.5

3 VR = 5 V
2.4
2 2.3 RL = 1 kΩ

1 2.2 RL = 4 kΩ
0 2.1
-40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100
17613-1 Tamb - Ambient Temperature (°C) 17616 Tamb - Ambient Temperature (°C)

Fig. 12 - Reverse Current vs. Ambient Temperature Fig. 15 - Input Threshold On Current vs. Ambient Temperature
ICCI - Low Level Supply Current (mA)

4.0

ITH - Input Threshold Off Current (µA)

2.6

3.5
2.5
3.0 VCC = 7 V
VCC = 5 V IF = 10 mA 2.4
2.5 IF = 10 mA RL = 350 Ω

2.0 2.3

1.5
2.2
1.0 RL = 1 kΩ
2.1
0.5 RL = 4 kΩ
0 2.0
-40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100
17614 Tamb - Ambient Temperature (°C) 17617 Tamb - Ambient Temperature (°C)

Fig. 13 - Low Level Supply Current vs. Ambient Temperature Fig. 16 - Input Threshold Off Current vs. Ambient Temperature
ICCH - High Level Supply Current (mA)

VOL - Low Level Output Voltage (V)

3.5 0.30
VCC = 5.5 V IL = 16 mA
VCC = 7 V IF = 5 mA
3.4 IF = 0.25 mA 0.25 IL = 13 mA

3.3
0.20
3.2 VCC = 5 V
IF = 0.25 mA 0.15
3.1 IL = 10 mA
0.10
3.0
IL = 6 mA
0.05
2.9

2.8 0.00
-40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100
17615 Tamb - Ambient Temperature (°C) 17618 Tamb - Ambient Temperature (°C)

Fig. 14 - High Level Supply Current vs. Ambient Temperature Fig. 17 - Low Level Output Voltage vs. Ambient Temperature

Rev. 2.1, 15-Jan-2021 8 Document Number: 84732

For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 6N137, VO2601, VO2611, VO2630, VO2631, VO4661
www.vishay.com
Vishay Semiconductors

Axis Title
20 10000 120

tP - Propagation Delay Time (ns)

VCC = 5.5 V tPLH, RL = 4 kΩ
IOH - High Level Output Current (nA)

VO = 5.5 V
IF = 250 µA 100
15
1000 80 tPLH, RL = 1 kΩ
tPLH, RL = 350 Ω

2nd line
1st line
2nd line

60
10

40
100 tPHL, RL = 350 Ω
tPHL, RL = 1 kΩ
5 20
tPHL, RL = 4 kΩ
0
-40 -20 0 20 40 60 80 100
0 10
-40 -20 0 20 40 60 80 100 120 17622 Tamb - Ambient Temperature (°C)
Tamb - Ambient Temperature (°C)

Fig. 18 - Low Level Output Current vs. Ambient Temperature Fig. 21 - Propagation Delay vs. Ambient Temperature

Axis Title
20 10000 120

tP - Propagation Delay Time (ns)

VCC = 3.6 V tPLH, RL = 4 kΩ
IOH - High Level Output Current (nA)

VO = 3.6 V
IF = 250 µA 100
15
1000 80 tPLH, RL = 1 kΩ
tPLH, RL = 350 Ω
2nd line
1st line
2nd line

60
10

40
100 tPHL, RL = 350 Ω
tPHL, RL = 1 kΩ
5 20
tPHL, RL = 4 kΩ

0
5 7 9 11 13 15
0 10
-40 -20 0 20 40 60 80 100 120 17623 IF - Forward Current (mA)
Tamb - Ambient Temperature (°C)

Fig. 19 - High Level Output Current vs. Ambient Temperature Fig. 22 - Propagation Delay vs. Forward Current

5.5 50
PWD - Pulse Width Distortion (ns)

5.0
RL = 4 kΩ
Vo - Output Voltage (V)

4.5 40
4.0
3.5
30
3.0
2.5
20
2.0
RL = 350 Ω RL = 1 kΩ
1.5
1.0 RL = 1 kΩ 10
RL = 350 Ω
0.5 RL = 4 kΩ
0 0
0 1 2 3 4 5 -40 -20 0 20 40 60 80 100
17621 IF - Forward Input Current (mA) 17624 Tamb - Ambient Temperature (°C)

Fig. 20 - Output Voltage vs. Forward Input Current Fig. 23 - Pulse Width Distortion vs. Ambient Temperature

Rev. 2.1, 15-Jan-2021 9 Document Number: 84732

For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 6N137, VO2601, VO2611, VO2630, VO2631, VO4661
www.vishay.com
Vishay Semiconductors

60 300
PWD - Pulse Width Distortion (ns)

tr, RL = 4 kΩ

tr, f - Rise and Fall Time (ns)

50 250
RL = 4 kΩ
40 200

30 150 tf, RL = 350 Ω

RL = 1 kΩ tf, RL = 1 kΩ
20 100 tf, RL = 4 kΩ
tr, RL = 1 kΩ
10 50
tr, RL = 350 Ω
RL = 350 Ω
0 0
5 7 9 11 13 15 5 7 9 11 13 15
17625 IF - Forward Current (mA) 17627 IF - Forward Current (mA)

Fig. 24 - Pulse Width Distortion vs. Forward Current Fig. 26 - Rise and Fall Time vs. Forward Current

300 60

tE - Enable Propagation Delay (ns)

tr, RL = 4 kΩ
tr, f - Rise and Fall Time (ns)

250 50
tELH, RL = 4 kΩ
200 40

150 30 tELH, RL = 350 Ω

tf, RL = 350 Ω
tf, RL = 1 kΩ
tELH, RL = 1 kΩ tEHL, RL = 350 Ω
100 tf, RL = 4 kΩ 20
tr, RL = 1 kΩ
50 10
tr, RL = 350 Ω
tEHL, RL = 1 kΩ tEHL, RL = 4 kΩ
0 0
-40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100
17626 Tamb - Ambient Temperature (°C) 17628 Tamb - Ambient Temperature (°C)

Fig. 25 - Rise and Fall Time vs. Ambient Temperature Fig. 27 - Enable Propagation Delay vs. Ambient Temperature

Rev. 2.1, 15-Jan-2021 10 Document Number: 84732

For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 6N137, VO2601, VO2611, VO2630, VO2631, VO4661
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS (in millimeters)
DIP-8
10.16 max. 7.62 typ.

3.10 ± 0.25
9.75 ± 0.15 6.70 ± 0.15
0.95 ± 0.20

3.55 ± 0.20

6.00 ± 0.25
0.70 ± 0.20
1.27 ± 0.10

0.50 ± 0.10
2.54 nom. .10
7° typ. 0.25 ± 0
3 x 2.54 = 7.62

8 7 6 5

PIN ONE I.D.

1 2 3 4

DIP-8, 400 mil (option 6)

10.16 typ.
10.16 max. 7.62 typ.
9.75 ± 0.15 6.70 ± 0.15
0.95 ± 0.20
3.55 ± 0.20
0.1 min.

1.27 ± 0.10

0.50 ± 0.10 0.25 ± 0.10

10.55 ± 0.40
2.54 nom.
3 x 2.54 = 7.62

8 7 6 5

PIN ONE I.D.

1 2 3 4

Rev. 2.1, 15-Jan-2021 11 Document Number: 84732

For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 6N137, VO2601, VO2611, VO2630, VO2631, VO4661
www.vishay.com
Vishay Semiconductors
SMD-8 (option 7)
10.05 ± 0.25
10.16 max. 7.62 typ.
9.75 ± 0.15
6.70 ± 0.15
0.95 ± 0.20

3.55 ± 0.20

0.25 ± 0.10
8.00 min.
8.40 min.

0.70 ± 0.20
1.27 ± 0.10 0.75 ± 0.25
2.54 nom. Leads
coplanarity
3 x 2.54 = 7.62 0.10 max.

Recommended Footprint

8 7 6 5

0.76

R0.250
2.54
1 2 3 4
PIN ONE I.D.
1.78

8.00 min. 1.52

11.05

SMD-8 (option 9)
9.78 ± 0.25
7.62 typ.
10.16 max.
9.75 ± 0.15 6.70 ± 0.15
0.95 ± 0.20

0.25 ± 0.10
3.55 ± 0.20
0.18 ± 0.08

8.00 min.
0.75 ± 0.20
1.27 ± 0.10 Leads coplanarity
2.54 nom. 0.10 max.

3 x 2.54 = 7.62

Recommended Footprint

8 7 6 5

0.76

R0.250
2.54
1 2 3 4
PIN ONE I.D. 1.78

8.00 min. 1.52

11.05

Rev. 2.1, 15-Jan-2021 12 Document Number: 84732

For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 6N137, VO2601, VO2611, VO2630, VO2631, VO4661
www.vishay.com
Vishay Semiconductors
PACKAGE MARKING
VO2611

V YWW 68

Fig. 28 - Example of VO2611-X017T

Notes
• VDE logo is only marked on option 1 parts
• Tape and reel suffix (T) is not part of the package marking

PACKING INFORMATION (in millimeters)

Tube
528 ± 0.2
330 ± 0.5
260 ± 0.5
200 ± 0.5
150 ± 0.5

125 ± 0.5

– 1.0
30 ± 0.5 B
VISHAY OPTOSEMICONDUCTOR MADE IN MALAYSIA ANTISTATIC

Detail B Detail A A
– 1.0

– 1.0

3 ± 0.5 – 1.0
380 ± 1
0.7 ± 0.5 1.0 14 x

13 x 10 = 130 17996-3

Fig. 29 - Shipping Tube Specifications for DIP-8 Packages

DEVICES PER TUBS

TYPE UNITS/TUBE TUBES/BOX UNITS/BOX
DIP-8 50 40 2000

DIP-8
12 ± 0.3
B

6.6 ± 0.3 Transparent rigid PVC

6° 2.7 ± 0.2
1
0.

4.4 ± 0.3
R

11 ± 0.3
5
0.

0.6 ± 0.1
R

10°
A Detail A Detail B
// 0.2 B 5.7 ± 0.15
17996-4
Section A - B Not to scale

Fig. 30 - Tube Shipping Medium

Rev. 2.1, 15-Jan-2021 13 Document Number: 84732

For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 6N137, VO2601, VO2611, VO2630, VO2631, VO4661
www.vishay.com
Vishay Semiconductors
DIP-8, 400 mil (option 6)
9

5.7
13.6
0.5

With stopper pins

4.3
tolerance: ± 0.5
15912
15.3 length: 575 ± 5

Fig. 31 - Tube Shipping Medium

Tape and Reel

ESD sticker

Tape slot
in core
330
(13")
Top cover tape

Regular, special
Embossed carrier or bar code label
Embossment
17998 17999

Fig. 32 - Tape and Reel Shipping Medium Fig. 33 - Tape and Reel Shipping Medium

SMD-8 (option 7)

4 ± 0.1 10 pitch cumulative

1.5 (0.059) min. (1.57 ± 0.004) tolerance on tape
Pin 1 and
top of component 2 ± 0.05 (0.079 ± 0.002) ± 0.2 (0.008)
0.35 (0.014)

Top 1.75 ± 0.1

cover (0.069 ± 0.004)
tape
10.41 (0.410)

7.5 ± 0.05 16.0 ± 0.3

(0.295 ± 0.002) (0.630 ± 0.012)
4.7 (0.185)
10.21
13.3 (0.523) (0.402)

12.0 (0.472)

0.1 (0.004) max.

Embossment Center lines
1.5 (0.059)
18008 of cavity
Direction of feed

Fig. 34 - Tape and Reel Packing (1000 pieces on Reel)

Rev. 2.1, 15-Jan-2021 14 Document Number: 84732

For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 6N137, VO2601, VO2611, VO2630, VO2631, VO4661
www.vishay.com
Vishay Semiconductors
SMD-8 (option 9)
4 ± 0.1 10 pitch cumulative
1.5 (0.059) min. (1.57 ± 0.004) tolerance on tape
Pin 1 and
top of component 2 ± 0.05 (0.079 ± 0.002) ± 0.2 (0.008)
0.35 (0.014)

Top 1.75 ± 0.1

cover (0.069 ± 0.004)
tape
10.2 (0.402)
7.5 ± 0.05 16.0 ± 0.3
(0.295 ± 0.002) (0.630 ± 0.012)
4.17 (0.164)
10.31
13.3 (0.523) (0.406)

12.0 (0.472)

0.1 (0.004) max.

Embossment Center lines
1.5 (0.059)
of cavity
18009
Direction of feed

Fig. 35 - Tape and Reel Shipping Medium

SOLDER PROFILES
Axis Title Axis Title
300 10000 300 10000
5s
Lead temperature Max. 260 °C
250 250 255 °C
235 °C to 245 °C
240 °C
260 °C Second Full line: typical
wave 217 °C
First wave Dotted lines:
Temperature (°C)

Temperature (°C)

200 process limits 1000 200 1000

Max. 30 s
2nd line

2nd line
2nd line

2nd line

ca. 2 K/s
1st line

1st line
ca. 200 K/s
150 150
100 °C to
130 °C Max. 120 s Max. 100 s
100 100 100 100
Max. ramp down 6 °C/s
2 K/s ca. 5 K/s
50 50 Max. ramp up 3 °C/s
Forced cooling

0 10 0 10
0 50 100 150 200 250 0 50 100 150 200 250 300
948626 Time (s) 19841 Time (s)

Fig. 36 - Wave Soldering Double Wave Profile According to Fig. 37 - Lead (Pb)-free Reflow Solder Profile According to
J-STD-020 for DIP Devices J-STD-020 for SMD Devices

HANDLING AND STORAGE CONDITIONS

ESD level: HBM class 2
Floor life: unlimited
Conditions: Tamb < 30 °C, RH < 85 %
Moisture sensitivity level 1, according to J-STD-020

Rev. 2.1, 15-Jan-2021 15 Document Number: 84732

For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

Revision: 01-Jan-2021 1 Document Number: 91000