0% found this document useful (0 votes)

1K views15 pages

Structural Analysis Interview Questions Civil Engineering Objective Type Questions and Answers

This document provides 60 structural analysis interview questions and their answers related to topics like static equilibrium, degree of static indeterminacy, stability, displacement methods, flexibility and stiffness matrices, and more. The questions are multiple choice and cover concepts applicable to the analysis of beams, frames, arches, and other structural elements.

Uploaded by

bereket abebayehu

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

1K views15 pages

Structural Analysis Interview Questions Civil Engineering Objective Type Questions and Answers

Uploaded by

bereket abebayehu

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 15

Engineering Interview Questions.

com
Engineering interview questions,multiple choice questions,objective type questions,seminor
topics,lab viva questions and answers ,online quiz test pdf free download for freshers.
Skip to content

 HOME
 interview Questions
 Multiple Choice Questions
 VIVA LAB Questions
 CLASS NOTES
 SEMINAR TOPICS
 ONLINE TEST
 GATE SYLLABUS
 IIT JEE SYLLABUS
 CAT

Home » STRUCTURAL ANALYSIS Questions and Answers » 60 TOP MOST STRUCTURAL

ANALYSIS Interview Questions – Civil Engineering Objective Type Questions and Answers

60 TOP MOST STRUCTURAL ANALYSIS

Interview Questions – Civil Engineering
Objective Type Questions and Answers
Structural Analysis Interview Questions :-
1. The number of independent equations to be satisfied for static equilibrium of a plane structure
is
a) 1
b) 2
c) 3
d) 6
Ans: c

2. If there are m unknown member forces, r unknown reaction components and j number of
joints, then the degree of static indeterminacy of a pin-jointed plane frame is given by
a) m + r + 2j
b) m – r + 2j
c) m + r – 2j
d) m + r – 3j
Ans: c
3. Number of unknown internal forces in each member of a rigid jointed plane frame is
a) 1
b) 2
c) 3
d) 6
Ans: c

4. Degree of static indeterminacy of a rigid-jointed plane frame having 15 members, 3 reaction

components and 14 joints is
a) 2
b) 3
c) 6
d) 8
Ans: c

5. Degree of kinematic indeterminacy of a pin-jointed plane frame is given by

a) 2j – r
b) j – 2r
c) 3j – r
d) 2j + r
Ans: a

6. Independent displacement components at each joint of a rigid-jointed plane frame are

a) three linear movements
b) two linear movements and one rotation
c) one linear movement and two rotations
d) three rotations
Ans: b

7. If in a pin-jointed plane frame (m + r) > 2j, then the frame is

a) stable and statically determinate
b) stable and statically indeterminate
c) unstable
d) none of the above
where m is number of members, r is reaction components and j is number of joints
Ans: b

8. A pin-jointed plane frame is unstable if

a) (m + r)<2j
b) m + r = 2j
c) (m + r)>2j
d) none of the above
where m is number of members, r is reaction components and j is number of joints
Ans: a
9. A rigid-jointed plane frame is stable and statically determinate if
a) (m + r) = 2j
b) (m + r) = 3j
c) (3m + r) = 3j
d) (m + 3r) = 3j
where m is number of members, r is reaction components and j is number of joints
Ans: c

10. The number of independent equations to be satisfied for static equilibrium in a space
structure is
a) 2
b) 3
c) 4
d) 6
Ans: d

11. The degree of static indeterminacy of a pin-jointed space frame is given by

a) m + r – 2j
b) m + r – 3j
c) 3m + r – 3j
d) m + r + 3j
where m is number of unknown member forces, r is unknown reaction components and j is
number of joints
Ans: b

12. The degree of static indeterminacy of a rigid-jointed space frame is

a) m + r – 2j
b) m + r – 3j
c) 3m + r – 3j
d) 6m + r – 6j
where m, r and j have their usual meanings
Ans: d

13. The degree of kinematic indeterminacy of a pin-jointed space frame is

a) 2j-r
b) 3j-r
c) j-2r
d) j-3r
where j is number of joints and r is reaction components
Ans: b

14. The number of independent displacement components at each joint of a rigid-jointed space
frame is
a) 1
b) 2
c) 3
d) 6
Ans: d

15. If in a rigid-jointed space frame, (6m + r) < 6j, then the frame is
a) unstable
b) stable and statically determinate
c) stable and statically indeterminate
d) none of the above
Ans: a

16. The principle of virtual work can be applied to elastic system by considering the virtual work
of
a) internal forces only
b) external forces only
c) internal as well as external forces
d) none of the above
Ans: c

17. Castigliano’s first theorem is applicable

a) for statically determinate structures only
b) when the system behaves elastically
c) only when principle of superposition is valid
d) none of the above
Ans: c

18. Principle of superposition is applicable when

a) deflections are linear functions of applied forces
b) material obeys Hooke’s law
c) the action of applied forces will be affected by small deformations of the structure
d) none of the above
Ans: a

19. In moment distribution method, the sum of distribution factors of all the members meeting at
any joint is always
a) zero
b) less than 1
c) 1
d) greater than 1
Ans: c

20. The carryover factor in a prismatic member whose far end is fixed is
a) 0
b) 1/2
c) 3/4
d) 1
Ans: b
21. In column analogy method, the area of an analogous column for a fixed beam of span L and
flexural rigidity El is taken as
a) L/EI
b) L/2EI
c) L/3EI
d) L/4EI
Ans: a

22. The degree of static indeterminacy up to which column analogy method can be used is
a) 2
b) 3
c) 4
d) unrestricted
Ans: b

23. The deflection at any point of a perfect frame can be obtained by applying a unit load at the
joint in
a) vertical direction
b) horizontal direction
c) inclined direction
d) the direction in which the deflection is required
Ans: d

24. In the slope deflection equations, the deformations are considered to be caused by
i) bending moment
ii) shear force
iii) axial force
The correct answer is
a) only (i)
b) (i)and(ii)
c) (ii) and (iii)
d) (i), (ii) and (iii)
Ans: a

25. The three moments equation is applicable only when

a) the beam is prismatic
b) there is no settlement of supports
c) there is no discontinuity such as hinges within the span
d) the spans are equal
Ans: c

26. While using three moments equation, a fixed end of a continuous beam is replaced by an
additional span of
a) zero length
b) infinite length
c) zero moment of inertia
d) none of the above
Ans: a

27. The Castigliano’s second theorem can be used to compute deflections

a) in statically determinate structures only
b) for any type of structure
c) at the point under the load only
d) for beams and frames only
Ans: b

28. Bending moment at any section in a conjugate beam gives in the actual beam
a) slope
b) curvature
c) deflection
d) bending moment
Ans: c

29. For a two-hinged arch, if one of the supports settles down vertically, then the horizontal
thrust
a) is increased
b) is decreased
c) remains unchanged
d) becomes zero
Ans: c

30. For a symmetrical two hinged parabolic arch, if one of the supports settles horizontally, then
the horizontal thrust
a) is increased
b) is decreased
c) remains unchanged
d) becomes zero
Ans: b

Structural Analysis Interview Questions

31. A single rolling load of 8 kN rolls along a girder of 15 m span. The absolute maximum
bending moment will be
a) 8 kN.m
b) 15 kN.m
c) 30 kN.m
d) 60 kN.m
Ans: c

32. The maximum bending moment due to a train of wheel loads on a simply supported girder
a) always occurs at centre of span
b) always occurs under a wheel load
c) never occurs under a wheel load
d) none of the above
Ans: b

33. When a uniformly distributed load, longer than the span of the girder, moves from left to
right, then the maximum bending moment at mid section of span occurs when the uniformly
distributed load occupies
a) less than the left half span
b) whole of left half span
c) more than the left half span
d) whole span
Ans: d

34. When a uniformly distributed load, shorter than the span of the girder, moves from left to
right, then the conditions for maximum bending moment at a section is that
a) the head of the load reaches the section
b) the tail of the load reaches the section
c) the load position should be such that the section divides it equally on both sides
d) the load position should be such that the section divides the load in the same ratio as it divides
the span
Ans: d

35. When a series of wheel loads crosses a simply supported girder, the maximum bending
moment under any given wheel
load occurs when
a) the centre of gravity of the load system is midway between the centre of span and wheel load
under consi-deration
b) the centre of span is midway between the centre of gravity of the load system and the wheel
load under consideration
c) the wheel load under consideration is midway between the centre of span and the centre of
gravity of the load system
d) none of the above
Ans: b

36. Which of the following is not the displacement method ?

a) Equilibrium method
b) Column analogy method
c) Moment distribution method
d) Kani’s method
Ans: b

37. Study the following statements.

i) The displacement method is more useful when degree of kinematic indeterminacy is greater
than the degree of static indeterminacy.
ii) The displacement method is more useful when degree of kinematic indeterminacy is less than
the degree of static indeterminacy.
iii) The force method is more useful when degree of static indeterminacy is greater than the
degree of kinematic indeterminacy.
iv) The force method is more useful when degree of static indeterminacy is less than the degree
of kinematic indeterminacy.
The correct answer is
a) (i) and (iii)
b) (ii) and (iii)
c) (i) and (iv)
d) (ii) and (iv)
Ans: d

38. Select the correct statement

a) Flexibility matrix is a square symmetrical matrix
b) Stiffness matrix is a square symmetrical matrix
c) both (a) and (b)
d) none of the above
Ans: c

39. To generate the j th column of the flexibility matrix

a) a unit force is applied at coordinate j and the displacements are calculated at all coordinates
b) a unit displacement is applied at co-ordinate j and the forces are calculated at all coordinates
c) a unit force is applied at coordinate j and the forces are calculated at all coordinates
d) a unit displacement is applied at co-ordinate j and the displacements are calculated at all co-
ordinates
Ans: a

40. For stable structures, one of the important properties of flexibility and stiffness matrices is
that the elements on the main diagonal
i) of a stiffness matrix must be positive
ii) of a stiffness matrix must be negative
iii) of a flexibility matrix must be positive
iv) of a flexibility matrix must be nega¬tive
The correct answer is
a) (i) and (iii)
b) (ii) and (iii)
c) (i) and (iv)
d) (ii) and (iv)
Ans: a

41. Effects of shear force and axial force on plastic moment capacity of a structure are
respectively to
a) increase and decrease
b) increase and increase
c) decrease and increase
d) decrease and decrease
Ans: d
42. Which of the following methods of structural analysis is a force method ?
a) slope deflection method
b) column analogy method
c) moment distribution method
d) none of the above
Ans: b

43. Which of the following methods of structural analysis is a displacement method ?

a) moment distribution method
b) column analogy method
c) three moment equation
d) none of the above
Ans: a

44. In the displacement method of structural analysis, the basic unknowns are
a) displacements
b) force
c) displacements and forces
d) none of the above
Ans: a

45. The fixed support in a real beam becomes in the conjugate beam a
a) roller support
b) hinged support
c) fixed support
d) free end
Ans: d

46. The width of the analogous column in the method of column analogy is
a) 2/EI
b) 1/EI
c) 1/2 EI
d) 1/4 EI
Ans: b

47. A simply supported beam deflects by 5 mm when it is subjected to a concentrated load of 10

kN at its centre. What will be deflection in a 1/10 model of the beam if the model is subjected to
a 1 kN load at its centre ?
a) 5 mm
b) 0.5 mm
c) 0.05 mm
d) 0.005mm
Ans: a

48. The deformation of a spring produced by a unit load is called

a) stiffness
b) flexibility
c) influence coefficient
d) unit strain
Ans: b

49. For a single point load W moving on a symmetrical three hinged parabolic arch of span L,
the maximum sagging moment occurs at a distance x from ends. The value of x is
a) 0.211 L
b) 0.25 L
c) 0.234 L
d) 0.5 L
Ans: a

50. Muller Breslau’s principle for obtaining influence lines is applicable to

i) trusses
ii) statically determinate beams and frames
iii) statically indeterminate structures, the material of which is elastic and follows Hooke’s law
iv) any statically indeterminate structure
The correct answer is
a) (i), (ii) and (iii)
b) (i), (ii) and (iv)
c) (i) and (ii)
d) only (i)
Ans: a

51. Consider the following statements:

Sinking of an intermediate support of a continuous beam
1. reduces the negative moment at support.
2. increases the negative moment at support.
3. reduces the positive moment at support.
4. increases the positive moment at the centre of span.
Of these statements
a) i and 4 are correct
b) 1 and 3 are correct
c) 2 and 3 are correct
d) 2 and 4 are correct
Ans: a

52. A load ‘W is moving from left to right support on a simply supported beam of span T. The
maximum bending moment
at 0.4 1 from the left support is
a) 0.16 Wl
b) 0.20 Wl
c) 0.24 Wl
d) 0.25 Wl
Ans: c
53. When a load crosses a through type Pratt truss in the direction left to right, the nature of force
in any diagonal member in the left half of the span would
a) change from compression to tension
b) change from tension to compression
c) always be compression
d) always be tension
Ans: a

STRUCTURAL ANALYSIS Questions and Answers pdf free download ::

This entry was posted in STRUCTURAL ANALYSIS Questions and Answers and tagged 60
TOP STRUCTURAL ANALYSIS Questions and Answers pdf. Bookmark the permalink.
← 160 TOP MOST APPLIED MECHANICS and GRAPHIC STATICS Interview Questions –
Civil Engineering Objective Type Questions and Answers
120 TOP MOST DESIGN of STEEL STRUCTURES Interview Questions – Civil Engineering
Objective Type Questions and Answers →

17 Responses to 60 TOP MOST STRUCTURAL ANALYSIS Interview Questions –

Civil Engineering Objective Type Questions and Answers
The link ed image cannot be displayed. The
file may hav e been mov ed, renamed, or
deleted. Verify that the link points to the
correct file and location.

1. David says: