ATR4517R1

DXXX-790-960/1710-2690/1710-2690-65/65/65-15i/17.5i/17.5i-M/M/M-R
EasyRET Tri-Band Antenna with 3 Integrated RCUs - 1.4m

Antenna Specifications
Electrical Properties
790 - 960 2 x (1710 - 2690)
Frequency range (MHz)
790 - 862 824 - 894 880 - 960 1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
Electrical downtilt (°) 0 - 14 , continuously adjustable 0 - 10 , continuously adjustable
0° 7° 14° 0° 7° 14° 0° 7° 14° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10°
Gain (dBi)
14.4 14.3 14.0 14.7 14.5 14.0 15.0 14.7 14.0 17.3 17.2 16.8 17.5 17.8 17.0 17.6 18.0 17.5 17.7 17.9 17.2
Side lobe suppression (Typ.) (dB) 0° 7° 14° 0° 7° 14° 0° 7° 14° 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10°
-for first side lobe above main beam 18 18 18 18 18 18 17 17 16 15 16 16 15 16 16 15 16 16 15 16 16
-within 0° - 15° sector above horizon 16 16 16 16 16 15 16 16 15 14 15 15 14 15 15 14 15 15 14 15 15
Horizontal 3dB beam width (°) 66 64 62 63 62 60 60
Vertical 3dB beam width (°) 16.0 15.6 14.6 6.4 5.7 5.1 4.6
VSWR < 1.5
Intra-system: ≥ 28
Isolation between ports (dB)
Inter-system: ≥ 30
Front to back ratio, copolar (dB) Typ. 27 Typ. 28
0° Typ. 20 Typ. 20
Cross polar ratio (dB)
±60° Typ. 10 Typ. 10
Max. power per input (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground

106
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1499 x 349 x 166
Packing dimensions (H x W x D) (mm) 1825 x 415 x 240
Antenna weight (kg) 21.0
Clamps weight (kg) 2.9 (2 units)
Antenna packing weight (kg) 30.3 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
1395
1499

Operational temperature (℃) -40 .. +65

Frontal: 505 (at 150 km/h)
Wind load (N) Lateral: 165 (at 150 km/h)
Rear side: 540 (at 150 km/h)
Max. operational wind speed (km/h) 150
Survival wind speed (km/h) 200
Connector 6 x 7/16 DIN Female
Connector position Bottom

Accessories
Item Model Description Weight Units per antenna

Downtilt kit ASMDT0C01 Mechanical downtilt: 0 - 12 ° 1.9 kg 1 (Separate packing)

1
 ATR4517R1
DXXX-790-960/1710-2690/1710-2690-65/65/65-15i/17.5i/17.5i-M/M/M-R
EasyRET Tri-Band Antenna with 3 Integrated RCUs - 1.4m

Integrated RCU Specifications

Properties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 10 (motor activated)
Power consumption (W)
< 0.5 (stand by)
Adjustment time (full range) (s) < 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
3 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function,
contact Huawei before system installation.

Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE

Integrated RCU S/N: HWMxxx..….r

HWMxxx….yL
HWMxxx..yyR

r - Red y - Yellow
L - Left array R - Right array

Pattern sample for reference

790 - 960 MHz 1710 - 2690 MHz 1710 - 2690 MHz

(Left) (Right)

Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com
Any previous datasheet issues become invalid. 2 Issue: 2014-06-04