SANY Rough-Terrain Crane 30 Ton (SRC300C)
SANY Rough-Terrain Crane 30 Ton (SRC300C)
SANY Rough-Terrain Crane 30 Ton (SRC300C)
SRC300C
SANY Rough-Terrain Crane
30 Tons Lifting Capacity
Basic performance
◤ Key structural parts are optimized in design, and the lifting performance is at the leading position
in the product industry with the same tonnage.
◤ Maximum length of boom is 9.9 m and the full extension length of boom is 31.5 m, which are at
the leading position in the industry.
◤ Fully optimized lifting boom of structural steel with U-shape section and high strength is used
in five sections, so that the lifting boom has a more uniform force and a lighter weight. The
installation angles of jib of 0°, 15° and 30° facilitate the switching of working condition and
improvement of operation efficiency.
◤ Four-wheel drive can adopt 4 steering modes, with a good maneuvering performance. The
minimum turning radius of four wheels of no more than 5.4 m promotes the passing ability and
comfort in complex road conditions.
High quality
◤ The stable and high-quality main oil pump, main valve, winch motor, slewing motor, balance valve
and other key hydraulic elements are used, and the system has high reliability; moreover, it has
excellent operation and control performance based on accurate parameter matching.
◤ With integrated slewing buffer valve, the slewing system has free trackslip function to realize
steady rotary start and control, showing outstanding micro-mobility.
◤ With the bus instrument of integrated intelligent control electrical system, drivers can grasp
running parameters and realize easy driving at any time; moreover, it has engine fault prompt
function, bringing in easy and rapid maintenance and troubleshooting.
◤ With safety glass and corrosion resistant steel plate, soften interior, super-large internal space,
panoramic skylight, adjustable seats and other humanization design, air conditioner and electric
wiper, it is more comfortable and relaxing for operation in control cabin.
GCP system
◤ The first remote monitoring and management system for equipment at home has a powerful
acquisition function for equipment operation condition and operation parameters, and can
diagnose and manage remote faults.
◤ Customers can master the operation of equipment as well as the query and ordering of accessories
at home.
Overall Dimensions
11820
9935 2312
3632
19° 17°
3940
2620
R38
41
Technical Parameters
Technical Parameters
Standard Equipment
Crane Introduction
Temperature: -20°C to +46°C
Road condition: Operations can be performed under poor road conditions in desert, oil field, gobi, etc.
Frame ▪▪ The frame is a double-girder structure welded with steel plate of high strength, with strong bearing capacity.
Gearbox ▪▪ Gearbox: Automatic gearbox has 6 forward gears and 3 backward gears with a wide speed ratio range, which can meet the
requirements of climbing at low speed and driving at high speed.
Axle ▪▪ The chassis is designed with two flexible axles. Driven by the front and rear axles, it shows good dynamic performance.
Axle ▪▪ The front axle adopts rigid connection while the rear axle is arranged with locking pivot type swing suspension that has oil
suspension cylinder.
Tyre ▪▪ Off-the-highway tires of large diameter are used, with great ground clearance and high off-road performance. The model of
tire is 17.50R25.
Braking ▪▪ The dual -circuit braking system is used. When a circuit is in fault, the other one can work normally, which improves the
system safety and reliability of braking system.
Hydraulic ▪▪ The stable and high-quality main oil pump, main valve, winch motor, slewing motor, balance valve and other key hydraulic
system of elements are used, and the system has high reliability; moreover, it has excellent operation and control performance based
on accurate parameter matching. The main valve has flow compensation and load feedback control functions to easily
chassis
realize stable control of a single action and combined action in all conditions.
Hydraulic
▪▪ H-shaped telescopic outrigger is used. It is supported at 4 points, with longitudinal and transversal span of 6.7 m × 6.5 m.
outrigger
Control system ▪▪ Busbar instrument: with the bus instrument of integrated intelligent control electrical system, drivers can grasp running
parameters and realize easy driving at any time; moreover, it has engine fault prompt function, bringing in easy and rapid
maintenance and troubleshooting.
▪▪ All-around safety protection system is provided. Three-circle protectors and height limiters are equipped for main and
auxiliary winches to avoid overfall and overwind of steel wire rope, prevent rollover and protect limit angle.
▪▪ Moment limiter: high intelligent moment limiter is used to protect suspending and loading operation in all dimensions and
ensure accurate, steady and comfortable operation;
Crane Introduction
Control room ▪▪ With independently researched and developed ergonomics design of SANY, sliding door, safety glass, corrosion resistant
steel plate, soften interior, super-large internal space, panoramic skylight, adjustable seats and other humanization design, air
conditioner and electric wiper, it is more comfortable and relaxing for operation; moment limiter display screen is equipped,
which realizes organic combination of main console with operation and display system and provides open-and-shut data of
all conditions during hoisting.
Boom system ▪▪ Boom: There are four booms, including basic boom of 9.9 m and fully extended boom of 31.5 m; they are made of welded
structural steel with high strength, with U-shape section.
▪▪ Jib: There are two jibs of 7.9 m and 13.7 m respectively at the setting angle of 0°, 15° and 30°.
▪▪ Telescoping mechanism: It is subject to dual-cylinder rope row type telescopic mode, with the full extension/retraction time
of 65/40 S only. The telescoping mechanism is simple, efficient, safe and reliable.
Slewing
▪▪ The slewing bearing made by SANY is used. The high reliability of SANY is inherited.
bearing
Slewing table
▪▪ It is designed independently by SANY, with more optimized structure, and made of fine-grained high-strength steel.
structure
Superstructure ▪▪ With load-sensitive variable plunger pump, it can adjust the displacement of oil pump in real time to realize the flow control
hydraulic with high accuracy and reduce the energy loss greatly.
▪▪ Electric control variable motor is used for winch, so high operation efficiency is ensured; the maximum speed of single rope
system
of main and auxiliary winch reaches 125 m/min.
▪▪ With integrated slewing buffer valve, the slewing system has free trackslip function to realize steady rotary start and control,
showing outstanding micro-mobility.
Lifting ▪▪ With double-variable speed governing pump and motor, high efficiency and energy conservation can be realized. Winch
mechanism balance valve is perfectly integrated with the unique anti-slip technology, thus weight can be lifted and dropped steadily. The
anti-rotating steel wire rope of high strength is provided to realize accurate lifting and positioning. The steel wire ropes of
main and auxiliary winches have the same diameter of 16 mm and the length of 175 m and 105 m respectively.
Derricking ▪▪ Double acting single piston rod hydraulic cylinder, fitted with safety balance valve, derricking angle: -2°-80°, adopting dead-
mechanism weight luffing system to reduce the energy consumption and improve the stationarity of luffing operation.
Slewing ▪▪ With 360° rotating, the maximum slewing speed is 2.6 r/min. The hydraulic proportional speed controller is used to realize
mechanism stable movement and reliable system. The unique slewing buffer design is adopted for more stable braking work.
Safety device ▪▪ Moment limiter: a moment limiter calculation system based on gravity model is established with the method of analysis
mechanics, and the rated loading accuracy is 0-10% through online no-load calibration to protect suspending and loading
operation in all dimensions; during overload operation, the system will alarm and prompt automatically to provide safety
guarantee for control and operation.
▪▪ Hydraulic balance valve, overflow valve, two-way hydraulic lock and other elements are provided for hydraulic system to
realize stable and reliable hydraulic system.
▪▪ Three-circle protector is equipped for main and auxiliary winches to avoid overfall of wire rope.
▪▪ Height limiter is equipped at the ends of boom and jib to avoid overwind of wire rope.
▪▪ Length, angle and pressure sensors are arranged to display the crane status in real time, so as to automatically stop
dangerous operation and perform buzzer alarm.
50
Height from the ground in meter (m)
0° 31.5+13.7m
48 15°
30°
46
44
31.5+7.9m
58°
42
40
38
56° 80°
36
31.5
34 70°
32
30
50°
28
24.3m
26
40°
24
22
20 30° 17.1m
18
16
20°
14
9.9m
80° MAX. BOOM ANGLE
12
10
10°
8
4
0°
0
34 32 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0
Operating radius in feet from axis of rotation in meter (m) AXIS OF
ROTATION
Unit: t
9.9-31.5m 6.7X6.5m 2.8t
Unit: t
9.9-31.5m 6.7X6.5m 2.8t
Extension outrigger 5M
Working radius (m) Working radius (m)
9.9 17.1 24.3 31.5
3 25.00 3
3.5 25.00 19.00 3.5
4 23.00 19.00 4
4.5 21.20 18.00 4.5
5 18.60 16.70 12.50 5
5.5 15.50 15.20 11.75 5.5
6 12.90 12.70 11.10 6
6.5 10.80 10.90 10.50 7.00 6.5
7 9.30 9.50 10.00 7.00 7
8 7.40 8.20 7.00 8
9 5.90 6.60 6.30 9
10 4.80 5.50 5.60 10
11 4.00 4.60 4.80 11
12 3.30 3.90 4.10 12
13 2.70 3.30 3.50 13
14 2.85 3.00 14
15 2.40 2.60 15
16 2.00 2.20 16
17 1.70 1.90 17
18 1.50 1.60 18
19 1.30 1.40 19
20 1.20 20
Min angle 0 0 25.00 43.00 Min angle
Load 7.00 1.00 / / Load
Lines 8 6 4 3 Lines
Unit: t
9.9-31.5m 6.7X6.5m 2.8t
Unit: t
9.9-31.5m 31.5+7.9m 6.7X6.5m 2.8t
Unit: t
9.9-31.5m 2.8t
● The values given in the table are rated load lifting capacities of crane when the whole crane is leveled on the flat and hard ground;
● The values above heavy line are determined by the strength of crane, while the values below heavy line are determined by the stability of crane;
● The rated load values determined by stability follow ISO 4305;
● The rated load lifting capacity in the table includes the weights of main hook and sling (main hook of 320 kg and auxiliary hook 85 kg);
● The rated load lifting capacity shall be no more than 3,500 kg when the boom tip pulley is applied;
● If the actual boom length and amplitude are within the two values in the table, the lifting capacity for operation shall be determined by the larger value;
Version: 2015.08