Scribd
Upload
87 views6 pages

Principles of FTIR Spectros

FTIR spectroscopy works by passing infrared light through a Michelson interferometer, which splits the light into two beams that reflect off mirrors and recombine to produce an interference pattern. This interference pattern is recorded as an interferogram, where the optical path difference is plotted against intensity. As a moving mirror changes the optical path length, the interferogram shows how intensities change with path differences. Diffuse reflectance FTIR allows measuring chemicals on surfaces like powders by analyzing how infrared light scatters and absorbs. Attenuated total reflectance FTIR can examine solid and liquid samples directly on the surface of high refractive index crystals without preparation. FTIR microscopy enables spatial mapping of vibrational modes in tissues,

Uploaded by

Yen Ling Ng
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
87 views6 pages

Principles of FTIR Spectros

FTIR spectroscopy works by passing infrared light through a Michelson interferometer, which splits the light into two beams that reflect off mirrors and recombine to produce an interference pattern. This interference pattern is recorded as an interferogram, where the optical path difference is plotted against intensity. As a moving mirror changes the optical path length, the interferogram shows how intensities change with path differences. Diffuse reflectance FTIR allows measuring chemicals on surfaces like powders by analyzing how infrared light scatters and absorbs. Attenuated total reflectance FTIR can examine solid and liquid samples directly on the surface of high refractive index crystals without preparation. FTIR microscopy enables spatial mapping of vibrational modes in tissues,

Uploaded by

Yen Ling Ng
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Principles of FTIR Spectroscopy

 In FTIR analyses, Infrared light from the light source passes through a Michelson
interferometer along the optical path.

The Michelson interferometer comprises a beam splitter, moving mirror, and fixed
mirror. The light beam split into two by the beam splitter is reflected from the moving
mirror and fixed mirror, before being recombined by the beam splitter.

As the moving mirror makes reciprocating


movements, the optical path difference to the fixed
mirror changes, such that the phase difference
changes with time. The light beams are recombined
in the Michelson interferometer to produce
interference light.
1
∆υ =
𝛿
The intensity of the interference light is recorded in
an interferogram, with the optical path difference
recorded along the horizontal axis.

2𝑣𝑚 𝛿
𝑓= υ interferogram frequency 𝑣𝑚 = mirror velocity
𝑐 2𝑡
Principles of Diffuse Reflectance Method
Measurement of chemicals adhering to a surface - Powders

K is the absorption coefficient, and S is the scattering


coefficient. In practice, the comparative reflectance
r∞ with respect to a standard powder such as KBr or
KCl, of which K is near zero (0) in the actual
measurement range

Spectrum of solid caffeine Shimadzu website


High Sensitivity Reflection Measurement
A reflection method is required to measure substances adhered to or applied
to a material that does not permit light transmission, such as a metal sheet.
Path length

Thin Film

Only the parallel polarized light affects the


absorption by the sample so using a
polarizer for measurements increases the
apparent peak size. Information on the
sample orientation can also be acquired, as
only functional groups with a perpendicular
dipole moment with respect to the metal
sheet are measured. However, such
increases in sensitivity are available only
with a metal substrate. Shimadzu website
High Sensitivity Reflection Measurement
A reflection method is required to measure substances adhered to or applied
to a material that does not permit light transmission, such as a metal sheet.

sp3 C-H stretching modes

Spectrum of a 25 Å-thick organic film on a Au surface.

Shimadzu website
Attenuated Total Reflectance
Enables samples to be examined directly in the solid or liquid state
without further preparation.

Penetration depth = 0.5-2 μm


Diamond, Si, Ge (high refractive index)

Shimadzu website
Fluorescence and FTIR Microscopy

Detector

Useful for generating spatial maps of “vibrational modes”. For example,


tissue analysis, polymer homogeneity, pharmaceutical quality, forensics.

Jasco website

You might also like