Scribd Logo
Upload

Welcome to Scribd!

  • 14 views

    Determination of Solid Cntent MOA 006-1

    Uploaded by

    Amr Abdelmegid abdelsalam hussein
    The document describes a method for determining the solid content of resinous materials. It involves weighing a sample before and after drying at 120°C for 1 hour to remove non-volatile content. The solid content percentage is calculated by comparing the weights.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    Determination of Solid Cntent MOA 006-1

    Uploaded by

    Amr Abdelmegid abdelsalam hussein
    14 views1 page
    The document describes a method for determining the solid content of resinous materials. It involves weighing a sample before and after drying at 120°C for 1 hour to remove non-volatile content. The solid content percentage is calculated by comparing the weights.

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a method for determining the solid content of resinous materials. It involves weighing a sample before and after drying at 120°C for 1 hour to remove non-volatile content. The solid content percentage is calculated by comparing the weights.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    14 views1 page

    Determination of Solid Cntent MOA 006-1

    Uploaded by

    Amr Abdelmegid abdelsalam hussein
    The document describes a method for determining the solid content of resinous materials. It involves weighing a sample before and after drying at 120°C for 1 hour to remove non-volatile content. The solid content percentage is calculated by comparing the weights.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 1

    Method Of Analysis

    Page 1 of 1
    Department Name : Quality Department / QC Code No.: MOA 006/1

    DETERMINATION OF SOLID CONTENT

    Issue Date : 01 / 08 / 04 Replaces : First Issue Reviewed : / /

    1. Revision:

    First Issue.

    2. Introduction:

    This practice is intended test method for determining non volatile content of
    the
    resinous materials ( All processed Polymer Materials ).

    3. Produce:

    3-1 Weight small piece of aluminum foil its dimension approximately 3 Cm² and record its

    weight ( A).

    3.2 Put about 0.1 gm of Material on the foil surface and flat it by glass rode and record

    the weight (B).

    3-3 The sample of Material is dried at 120° C for 1 hr in the furnace.

    3-4 Weight the sample after cooling and record the weight ( C ).

    4. Calculations:

    The solid content % = ( C –A ) X 100


    ( B –A )

    5. Reference:

    Annual book ASTM standards D 4209 Sec. 6 volume 06 – 02.


    Prepared By : QC Manager: Plant Manager:

    You might also like