Scribd Logo
Upload

Welcome to Scribd!

  • 20 views

    17 Pros and Cons of Y Type and T Type

    Uploaded by

    PHAM THANH TU
    The document discusses different types of strainers including Y-casting, Y-fabricated, and T-straight strainers. It provides information on their key features, differential pressure, ease of use, effective filter area, and probability of screen damage. A table also recommends different strainer types depending on diameter and mesh size.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    17 Pros and Cons of Y Type and T Type

    Uploaded by

    PHAM THANH TU
    20 views3 pages
    The document discusses different types of strainers including Y-casting, Y-fabricated, and T-straight strainers. It provides information on their key features, differential pressure, ease of use, effective filter area, and probability of screen damage. A table also recommends different strainer types depending on diameter and mesh size.

    Original Title

    17 Pros and Cons of Y type and T type

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses different types of strainers including Y-casting, Y-fabricated, and T-straight strainers. It provides information on their key features, differential pressure, ease of use, effective filter area, and probability of screen damage. A table also recommends different strainer types depending on diameter and mesh size.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    20 views3 pages

    17 Pros and Cons of Y Type and T Type

    Uploaded by

    PHAM THANH TU
    The document discusses different types of strainers including Y-casting, Y-fabricated, and T-straight strainers. It provides information on their key features, differential pressure, ease of use, effective filter area, and probability of screen damage. A table also recommends different strainer types depending on diameter and mesh size.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    17 Pros and Cons of Y type and T type

    T-straight
    Y-casting Y-Fabricated (BW end is available)

    Category Y-casting Y-Fabricated T-straight


    12 " or larger, require When the flow velocity in
    Low differential pressure
    extra wooden patterns the pipe is fast, eddy
    Key Feature and long cleaning cycles,
    (Unverified), current forms; it can causes
    advantageous in all aspects.
    Overweight the mesh teared.
    Differential Pressure Fair Poor Good
    Good Good
    Ease of Use Poor
    (When installed horizontally) (When installed horizontally)
    Effective Filter Area Fair Fair Good
    Probability of Screen
    Fair Poor Good
    Damage
    Conclusion △ X ◎
    ◎ : Recommended, ○ : Option △ : Possible but 1
    Inefficient X : Not recommended
    #Reference: Pros and Cons of each type strainer

    Bucket or Bucket or T3
    Y- Y- Y-
    구분 Duplex Duplex T1/2 V- R- WW- Cone
    Forged Casting Fabricated
    (Casting) (Fabricated) type type Type
    Recommended 40~60# 40~60# 40~60# or 60~80# or 40~80# or 60# or
    60# or less #100
    Mesh or less or less less less less less
    Reasonable
    Range of ½”~2” ½”~12” 6”~24” ½”~12” 2”~40” 3”~60” 3”~60” 2”~60”
    Production
    Pressure
    ⊙ X X △ △ ⊙ ⊙
    Resistance
    Reasonable Butt-
    SW FLGD Butt-Weld FLGD FLGD Butt-Weld FLGD
    Pipe End Weld
    Approximate
    200% 150% 150% 250%~400% 250%~400% 200% 100% 150% 300% 150%
    Open Ratio
    Design
    Easy Easy Easy Difficult Difficult Easy Easy Easy Easy Easy
    Application
    Installation
    Horizontal
    Direction Horizo Horizo
    / Lower Horizontal Horizontal Upper part Upper part Below level
    (Desorption of -ntal -ntal
    part
    the screen)
    Screen Cleaning △ △ △ △ △ △ △ X
    Resistance in Pipe Fair Fair Poor Fair Poor Fair Poor Fair Good Good
    Price 100 80 100 200 / 800 200 / 800 100 100 100 100 80
    ※ When choosing a strainer, there is a lot to consider, mesh size, pipe diameter, cleaning frequency, type of fluid, and
    maintains space. Therefore, it is hard to say which product is good. The customer's driving experience (50%) and the 2
    advice of the maker (50%) must be combined to help select a reasonable type.
    #Reference: Strainer recommendation depending※ Check ① mesh and compare ② diameter.
    on diameter and mesh
    YF(Forged) YC(Casting) B(Casting) YS BS T1,2 T3 cone
    Category
    ~600LB 900LB~ ~600LB 900LB~ ~300LB 600LB~ (Pipe) (Pipe) (Fitting) (Fitting) ~600LB 900LB~
    ① -> Allow ~60# ~60# ~80# ~40# ~80# ~40# ~40# ~100#
    1/2" ◎ ○ △ ◎ ○ △ X X X X ⒳ ⒳
    ② ->

    3/4" ◎ ○ △ ◎ ○ △ X X X X ⒳ ⒳
    1" ◎ ○ △ ◎ ○ △ X X X X ⒳ ⒳
    1 1/2" ◎ ○ △ ◎ ○ △ X ⒳ ⒳ ⒳ ⒳ ⒳
    2" ◎ ⒳ ○ ◎ ○ △ ○ ○ △ △ ○ ○
    3" ⒳ ⒳ ○ ◎ ○ △ ○ ○ ◎ ◎ ○ ○
    4" ○ ◎ ○ △ ○ ○ ◎ ◎ ○ ○
    5" ○ ◎ ○ △ ○ ○ ◎ ◎ ○ ○
    6" ○ ⒳ ○ △ ○ ○ ◎ ◎ ○ ○
    8" ○ ⒳ ○ △ ○ ○ ◎ ◎ ○ ○
    10" ○ ⒳ ○ △ ○ ○ ◎ ◎ ○ ○
    12" ○ ⒳ ○ △ ○ ○ ◎ ◎ ○ ○
    14" △ ⒳ △ ⒳ ○ ○ ◎ ◎ ○ ○
    16" △ ⒳ △ ⒳ ○ ○ ◎ ◎ ○ ○
    18" △ ⒳ △ ⒳ ○ ○ ◎ ◎ ○ ○
    20" △ ⒳ △ ⒳ ○ ○ ◎ ◎ ○ ○
    22" △ ⒳ △ ⒳ ○ ○ ◎ ◎ ○ ○
    24" △ ⒳ △ ⒳ ○ ○ ◎ ◎ ○ ○
    26" ⒳ ⒳ ⒳ ⒳ △ ○ ◎ ◎ ○ ○
    28" ⒳ ⒳ ⒳ ⒳ △ ○ ◎ ◎ ○ ○
    30" ⒳ ⒳ ⒳ ⒳ △ ○ ◎ ◎ ○ ○
    32" ⒳ ⒳ ⒳ ⒳ △ ○ ◎ ◎ ○ ○
    34" ⒳ ⒳ ⒳ ⒳ △ ○ ◎ ◎ ○ ○
    36" ⒳ ⒳ ⒳ ⒳ △ ○ ◎ ◎ ○ ○
    38" ⒳ ⒳ ⒳ ⒳ △ ○ ◎ ◎ ○ ○
    40“ ~ ⒳ ⒳ ⒳ ⒳ △ ○ ◎ ◎ ○ ○
    ◎ : Recommended, ○ : Option △ : Possible but 3
    ※ This table is just a guideline.
    Inefficient X : Not recommended

    You might also like