Scribd Logo
Upload

Welcome to Scribd!

  • 31 views

    Connect As Below:: Serial Suite: ECU Plug

    Uploaded by

    rumellemur59
    The document provides wiring instructions for connecting a serial suite device to an ECU plug and bootstrapping the pin. The red wire of the serial suite connects to the two pin red wires on the ECU plug for power. The black wire connects to the single pin black wire on the ECU plug for ground. The green wire connects to the single pin green wire on the ECU plug for the K line. To bootstrap, the blue wire of the serial suite connects via cable to the boot pin on the ECU and the metal point is held for seconds to allow reading and writing to the ECU.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Connect As Below:: Serial Suite: ECU Plug

    Uploaded by

    rumellemur59
    31 views2 pages
    The document provides wiring instructions for connecting a serial suite device to an ECU plug and bootstrapping the pin. The red wire of the serial suite connects to the two pin red wires on the ECU plug for power. The black wire connects to the single pin black wire on the ECU plug for ground. The green wire connects to the single pin green wire on the ECU plug for the K line. To bootstrap, the blue wire of the serial suite connects via cable to the boot pin on the ECU and the metal point is held for seconds to allow reading and writing to the ECU.

    Original Title

    ME7.1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides wiring instructions for connecting a serial suite device to an ECU plug and bootstrapping the pin. The red wire of the serial suite connects to the two pin red wires on the ECU plug for power. The black wire connects to the single pin black wire on the ECU plug for ground. The green wire connects to the single pin green wire on the ECU plug for the K line. To bootstrap, the blue wire of the serial suite connects via cable to the boot pin on the ECU and the metal point is held for seconds to allow reading and writing to the ECU.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    31 views2 pages

    Connect As Below:: Serial Suite: ECU Plug

    Uploaded by

    rumellemur59
    The document provides wiring instructions for connecting a serial suite device to an ECU plug and bootstrapping the pin. The red wire of the serial suite connects to the two pin red wires on the ECU plug for power. The black wire connects to the single pin black wire on the ECU plug for ground. The green wire connects to the single pin green wire on the ECU plug for the K line. To bootstrap, the blue wire of the serial suite connects via cable to the boot pin on the ECU and the metal point is held for seconds to allow reading and writing to the ECU.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Connect as below:

    Serial Suite: ECU Plug:

    Red to 2 Pins Red (Power Supply +12 Volt)


    Black to 1 Pins Black (Ground)
    Green to 1 Pin Green (K Line)

    Piasiniengineering [email protected] – http://www.piasiniengineering.it


    Tel: +39 0342 489060 - Fax: +39 0342 488298
    Bootstrap’s Pin:

    The boot pin you have to connect it to Serial Suite’s blue banana through the
    appropriate cable and the metal point. Holding connect the metal point for some
    second and during the connection time it will be able the READ and WRITE of Ecu.

    Piasiniengineering [email protected] – http://www.piasiniengineering.it


    Tel: +39 0342 489060 - Fax: +39 0342 488298

    You might also like