Scribd
Upload
98 views1 page

Tutorial 2 - Linearization

This document provides instructions for four tutorial problems involving linearizing nonlinear dynamic models. Problem 1 asks to linearize three single-input, single-output models with nonlinear rate equations. Problem 2 involves linearizing a multiple-input, multiple-output system of two equations. Problem 3 requires linearizing the model equations for a series reaction of A to B to C. Problem 4 gives the nonlinear model equations for a continuous stirred-tank reactor (CSTR) and asks to linearize them.

Uploaded by

carleston thurgood
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
98 views1 page

Tutorial 2 - Linearization

This document provides instructions for four tutorial problems involving linearizing nonlinear dynamic models. Problem 1 asks to linearize three single-input, single-output models with nonlinear rate equations. Problem 2 involves linearizing a multiple-input, multiple-output system of two equations. Problem 3 requires linearizing the model equations for a series reaction of A to B to C. Problem 4 gives the nonlinear model equations for a continuous stirred-tank reactor (CSTR) and asks to linearize them.

Uploaded by

carleston thurgood
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DEPARTMENT OF CHEMICAL ENGINEERING

P.O.BOX 1906
BELLVILLE
7535
TEL: (021) 959 6083

PROCESS CONTROL III - TUTORIAL 2 Linearization

1) Linearize the following single-input, single-output non-linear dynamic model equations:


dy
a) =  y +  y 2 +  lny ,,  : constants
dt
dy 1 − y
b) = m + ym2 + sin αm α : constant
dt y
dy
c) = ym − 2y + m
dt

2) Linearize the following multiple-input, multiple-output non-linear dynamic model equations:


dy 1
= 2y 12 + 3y 1y 2 + m1 − m 32
dt
a)
dy 2
= y 2 − 4 m1m 2
dt
dh
A = Fi − F
dt
b)
dT Q
Ah = Fi (Ti − T ) +
dt ρC p

3) The following first-order series reaction takes place in a batch reactor:


A→B→C

Linearize the model equations associated with this system.

4) The model equations for a CSTR are given by the following equations:

dC A 1
= (C Ai − C A ) − k  e RT  C A
−E

dt 

dT 1 UA
= (Ti − T ) + k  e RT  C A − (T − Tc )
−E

dt  ρC P V

Linearize the above set of model equations.

You might also like