Setup CMU for CDMA Network Configuration:

[Menu Select] soft key

Variation Dial

Multifunction soft keys Traffic Direction Indicator Leds

1. Power on the CMU-200.

2. Press the [Signal Off] soft key.

3. Verify both Traffic led’s above RF 2 are on. If they are both on Port RF 2 skip to
Step 4.
Adjust Ports Input and Output
1. Press [AF/RF] soft key (under Connection Control screen).
2. Then Press [RF Output] or [RF Input] soft key. Then rotate the
Variation Dial until the symbol is under RF 2 and then press [RF Output]
or [RF Input] soft key.
4. Press [Menu Select] soft key until you see the Menu Select screen (upper left part
of the screen).
5. Using the Variation Dial scroll the box until "IMT-2000 Mobile Station" press
the Variation Dial to expand the menu if necessary.
6. Highlight "CDMA2000 Cellular” by turning the Variation Dial and then press the
[Right Variation Arrow] soft key.
7. Using the Variation Dial, highlight "Signaling" and press the Variation Dial to
expand the menu if necessary.
8. Using the Variation Dial highlight "Overview" and press the Variation Dial to
expand the menu if necessary.
9. Using the Variation Dial highlight "→ Overview O-QPSK" and press the
Variation Dial.
 Parameters before a call Parameters while in a call

10. Press the [Network] soft key.

11. Using the Variation Dial highlight, "System Parameters" and press the Variation
Dial to expand this menu if necessary.
12. Highlight "System ID Number" using the # key pad type "value" and press
[Enter].
13. Using the Variation Dial highlight, "Call Indicators" and press the Variation Dial
to expand this menu if necessary.
14. Highlight "Caller ID" using the # key pad type "999999999" and press [Enter].
15. Using the Variation Dial highlight, "Caller ID Presentation Indicator" and press
the Variation Dial to expand this menu if necessary.
16. Press the Variation Dial and rotate it until “Presentation Allowed” is displayed
and press the Variation Dial in.
17. Using the Variation Dial highlight "Registration" and press the Variation Dial to
expand this menu if necessary.
18. Highlight "Time Based” and using the Variation Dial select "12.16s" and press the
Variation Dial.
19. Verify all other services available under this menu are “ON” (i.e. Home, Foreign
SID, Foreign NID, Power Up, Power Down and Parameter Reg.)
20. Press the [BS Signal] soft key.
21. Using the Variation Dial, highlight "RF Settings" and press the Variation Dial to
expand this menu if necessary.
22. Highlight "RF Channel [BC0]" and using the # key pad type "value" and press
[Enter] soft key.
23. Using the Variation Dial, highlight "RF Power" and press the Variation Dial to
expand this menu if necessary.
24. Highlight "CDMA Power" and using the # key pad type "-70 dBm" and press
[Enter] soft key.
25. Using the Variation Dial scroll down to "OCNS Level" and verify that it reads
"OFF”. If necessary press the [On/Off] soft key and then press [Enter] soft key.
26. Use the Variation Dial to highlight "Impairments" and press the Variation Dial to
expand this menu if Necessary.
27. Verify all types of Impairments are “OFF” under this menu. (i.e. AWGN Level,
BS Frequency Offset and Injected TxFER)
28. Using the Variation Dial highlight "Power Control" and press the Variation Dial
to expand this menu if necessary.
29. Highlight "Power Ctrl. Bits" and using the Variation Dial select "Auto" and then
press the Variation Dial.
30. Using the Variation Dial, highlight "FCH" and press the Variation Dial to expand
this menu if necessary.
31. Using the Variation Dial scroll down to "FCH LEVEL" and using the # key pad
type in "-7.4 dB" and then press [Enter] soft key.
32. Press the [Service Cfg.] soft key.
33. Using the Variation Dial scroll down to "Accept MS Originated Call" press the
Variation Dial and rotate the Variation Dial until “value” is displayed and press the
Variation Dial.
34. Using the Variation Dial highlight "Primary Service Class" and press the
Variation Dial to expand this menu if necessary.
35. Using the Variation Dial highlight "Messaging Teleservice (WMT)" and press the
Variation Dial to expand this menu if necessary.
36. Using the Variation Dial scroll down to "Selected Service Option" press the
Variation Dial and rotate the Variation Dial until “value” is displayed and press the
Variation Dial.
37. Press the [Connection] soft key.
38. Press the [1st Service Class] soft key and using the Variation Dial scroll down to
“value” and press the Variation Dial to select.
39. Verify the Signal is OFF in the Connection Control Screen upper right part of the
screen.
 Signal Dictionary
Green Text is expandable menus.
Red Text is parameters.
Purple Text represents multifunction push buttons.
Red Text is value.

AWGN Level-Turns on or off the Additive White Gaussian Noise generator and sets the
level for modulation. This provides noise to more closely simulate actual operating
conditions.
PICH Level-Allows you to set the Pilot Channel level in the forward CDMA channel.
Typical setting is -7.0 dB.
BS Freq. Offset-Adjusts the carrier frequency of the CMU/base station. This setting is
disabled if the RF Frequency is adjusted away from a standard RF Channel frequency.
Power Control-Defines the power control bit (PCB) sequence that the CMU sends to the
mobile station for controlling its total output power (closed loop power control).
FCH Level-Adjusts the signal level of the Fundamental Channel in the forward CDMA
channel. Typical setting is -7.4 dB.
OCNS Level-Turn on or off Orthogonal Channel Noise Simulator. Setting this to
function “ON” requires a predefined Output Power level to be entered.
Sync Level-Allows you to set the signal level of the sync channel in the forward CDMA
channel. Typical setting is -8.0 dB.
Accept All Calls-Accept all MOCs, irrespective of the configured service option at the
CMU.
Accept No Calls – Intercept-Do not processes any Mobile Originated Call but rather
communicate an intercept condition when the mobile attempts a call.
Accept No Calls – Reorder-Do not processes any Mobile Originated Call but rather
communicate a reorder condition when the mobile attempts a call.
Accept No Calls – Busy-Do not processes any Mobile Originated Call but communicate a
busy condition when the mobile attempts a call.
Ignore MS-Do not process any Mobile Originated Call; rather discard the mobile’s
Origination message.