Scribd Logo
Upload

Welcome to Scribd!

  • 105 views

    Example of Pre-Spud Checklist: Safety

    Uploaded by

    Ali Alakari
    This document is a pre-spud checklist for drilling rig safety that contains over 100 individual yes/no checklist items covering equipment, machinery, and safety features. It addresses safety considerations and inspections needed for areas like the drill floor, derrick, mud tanks, mud pumps, engines, tongs, slips and elevators, drawworks, and blockline prior to beginning drilling operations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Example of Pre-Spud Checklist: Safety

    Uploaded by

    Ali Alakari
    105 views22 pages
    This document is a pre-spud checklist for drilling rig safety that contains over 100 individual yes/no checklist items covering equipment, machinery, and safety features. It addresses safety considerations and inspections needed for areas like the drill floor, derrick, mud tanks, mud pumps, engines, tongs, slips and elevators, drawworks, and blockline prior to beginning drilling operations.

    Original Title

    pre-spud-checklist--2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a pre-spud checklist for drilling rig safety that contains over 100 individual yes/no checklist items covering equipment, machinery, and safety features. It addresses safety considerations and inspections needed for areas like the drill floor, derrick, mud tanks, mud pumps, engines, tongs, slips and elevators, drawworks, and blockline prior to beginning drilling operations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    105 views22 pages

    Example of Pre-Spud Checklist: Safety

    Uploaded by

    Ali Alakari
    This document is a pre-spud checklist for drilling rig safety that contains over 100 individual yes/no checklist items covering equipment, machinery, and safety features. It addresses safety considerations and inspections needed for areas like the drill floor, derrick, mud tanks, mud pumps, engines, tongs, slips and elevators, drawworks, and blockline prior to beginning drilling operations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 22

    Pre-Spud Checklist # 2

    Last Updated Friday, 02 December 2011 18:47

    Example of Pre-Spud Checklist

    SAFETY

    Y/N

    Fire fighting equipment in place & tested

    Emergency showers, eyewash stations & P.P.E in good condition

    All equipment connected to earring system

    Dangerous chemicals separated & warning signs posted

    1 / 22
    Pre-Spud Checklist # 2
    Last Updated Friday, 02 December 2011 18:47

    Safety signs posted at entrance of location & at relevant areas

    General

    Diesel sufficient

    Rig water sufficient

    Camp water sufficient

    2 / 22
    Pre-Spud Checklist # 2
    Last Updated Friday, 02 December 2011 18:47

    Spud mud ready

    Cement on location

    Cement line installed C/W safety wire

    Is rig site housekeeping good?

    When was last rig site safety meeting – daily?

    3 / 22
    Pre-Spud Checklist # 2
    Last Updated Friday, 02 December 2011 18:47

    Are no smoking signs displayed?

    Are gas cylinders correctly racked?

    Drill Floor

    Is housekeeping good?

    4 / 22
    Pre-Spud Checklist # 2
    Last Updated Friday, 02 December 2011 18:47

    Is floor in good condition?

    Are there tripping hazards?

    Are all railings secure and straight?

    Are all railings in place?

    Is V-door barred when not in use?

    Is there a mouse hole cover?

    5 / 22
    Pre-Spud Checklist # 2
    Last Updated Friday, 02 December 2011 18:47

    Is there a rotary hole cover?

    Is there a first floor aid kit on the drill floor?

    Is there eyewash on the drill floor?

    Is all drill floor instrumentation working correctly/

    When were emergency cut-out switches last tested? (Date)

    6 / 22
    Pre-Spud Checklist # 2
    Last Updated Friday, 02 December 2011 18:47

    Are winch wires in good condition?

    Are winch brakes in good condition?

    Are winch wires clear of derrick?

    Are winch drums guarded?

    Are cable clips installed correctly?

    7 / 22
    Pre-Spud Checklist # 2
    Last Updated Friday, 02 December 2011 18:47

    Derrick

    Are all mast and substructure pins installed?

    Are there any damaged members?

    Are all ladders in good condition?

    Are there safety cages / devices?

    8 / 22
    Pre-Spud Checklist # 2
    Last Updated Friday, 02 December 2011 18:47

    Has monkey board been inspected?

    Has stabbing board been inspected?

    Are all winch sheaves in good condition?

    Do they have safety lines?

    Is derrick lighting adequate?

    9 / 22
    Pre-Spud Checklist # 2
    Last Updated Friday, 02 December 2011 18:47

    Are lights secured and do they have safety wires?

    Is there a derrick man’s escape line?

    When was it last inspected / tested / cleaned? (Date)

    Are kelly spinner hoses snubbed?

    Kelly spinner working properly

    10 / 22
    Pre-Spud Checklist # 2
    Last Updated Friday, 02 December 2011 18:47

    Are rotary hoses snubbed?

    Geolograph line hooked up?

    Mud Tanks

    Are grating is good condition?

    Are there gaps in grating?

    11 / 22
    Pre-Spud Checklist # 2
    Last Updated Friday, 02 December 2011 18:47

    When gratings are removed is area roped off?

    Are ladders in good condition?

    Are railings secure with no gaps?

    Is all moving machinery guarded?

    Is eye protection available?

    12 / 22
    Pre-Spud Checklist # 2
    Last Updated Friday, 02 December 2011 18:47

    Is eye wash available?

    All solids control equipment tested

    Shaker screens installed

    L.P. mud system complete and tested

    Degasser test run

    13 / 22
    Pre-Spud Checklist # 2
    Last Updated Friday, 02 December 2011 18:47

    Mud Pumps

    Are there covers over pistons?

    Are relief lines secured?

    H.P. mud system complete and pressure tested

    H.P. mud lines snubbed

    14 / 22
    Pre-Spud Checklist # 2
    Last Updated Friday, 02 December 2011 18:47

    Cellar jet installed and tested

    Engines

    Are all elec. Switchboards covered and locked?

    Is there easy access to emergency switches?

    15 / 22
    Pre-Spud Checklist # 2
    Last Updated Friday, 02 December 2011 18:47

    Are electric cables protected?

    Diesel systems checked for leaks

    Tongs

    Is breakout wire in good condition?

    Is make-up chain in good condition?

    16 / 22
    Pre-Spud Checklist # 2
    Last Updated Friday, 02 December 2011 18:47

    Are back-up wires in good condition?

    Are tong dies in good condition?

    Do counter balances move freely?

    Are suspension wires in good condition?

    Are cable clips correctly installed?

    17 / 22
    Pre-Spud Checklist # 2
    Last Updated Friday, 02 December 2011 18:47

    Slips and Elevators

    Are slip dies in good condition?

    Are slip handles in good condition?

    Do all elevators open / close easily?

    18 / 22
    Pre-Spud Checklist # 2
    Last Updated Friday, 02 December 2011 18:47

    Are all pins & latches in good condition?

    Drawworks

    Is brake correctly adjusted?

    Are rims and pads in good condition?

    Crown-o-matic tested?

    19 / 22
    Pre-Spud Checklist # 2
    Last Updated Friday, 02 December 2011 18:47

    All clutches & controls working properly

    Blockline

    Is blockline in good condition?

    Can fast line interfere with derrick?

    20 / 22
    Pre-Spud Checklist # 2
    Last Updated Friday, 02 December 2011 18:47

    Can dead line interfere with derrick?

    Is dead line anchor in good condition?

    Is line clamp in good condition?

    When were bolts last checked tight? (Date)

    Is sensor adjusted correctly

    21 / 22
    Pre-Spud Checklist # 2
    Last Updated Friday, 02 December 2011 18:47

    22 / 22

    You might also like